Manual Mitsubishi EW330U

60 pages Not applicable
Download

Go to site of 60

Summary
  • Mitsubishi EW330U - page 1

    EX320U/EW330U ENGLISH DLP™ PROJECT OR MODEL EX320U/EW330U User Manual This User Manual is important to you. Please read it before us ing your projector . ...

  • Mitsubishi EW330U - page 2

    EN-2 The lightning flash with arrowhea d symbol within an equilateral triangle is intende d to alert the user to the presence of uni ns u- lated "dangerous voltage" withi n the product’ s enclosure t hat may be of suf ficient magnit ude to co nstitute a risk of electric shock. The exclamation point within an equilater al triangle is int ...

  • Mitsubishi EW330U - page 3

    EN-3 ENGLISH WA R N I N G • The lens cap is for protecting the le ns. If you leave the lens cap on the lens with the projector tu rned on, it may be deformed because of heat build-up. Remove the lens cap when you turn on the projector . • One of power cor ds for the U.S. , Europe, U.K ./Singapore, Aust ralia, Korea and Argentina is pr ovided ap ...

  • Mitsubishi EW330U - page 4

    EN-4 Content s Important safeguards ......... ......... ........... ......... ............ ........ ............ ........ ............ ........... ...... ............ ...... 5 Projecto r exterior view ........... ......... ........... ......... ........... ......... ......... ........... ......... ........... .... ..... ......... .... 7 Controls an ...

  • Mitsubishi EW330U - page 5

    EN-5 ENGLISH Import ant safeguards Please read all these instructions regar ding your projector and retain them for future reference. Follow all warnings and instructions marked on the projecto r . 1. Read instructions All the safety and operating instr uctions should be read before the appliance is operated. 2. Retain instructions The safety and o ...

  • Mitsubishi EW330U - page 6

    EN-6 WA R N I N G : Unplug immediately if there is something wro ng with your projector . Do not operate if smoke, stra nge noise or odor comes out of your pro- jector . It may cause fire or electric shock. In this case, unp lug immedi- ately and contact yo ur dealer . Never remove the cabinet. This projector contains high volt age circuitry . An i ...

  • Mitsubishi EW330U - page 7

    EN-7 ENGLISH Projector exterior view 1. External control panel (See "Projector" on page 8 for details.) 2. Lamp cover 3. V ent (heated air exhaust) 4. Quick-release button 5. Lens cover 6. Focus ring and Zoom ring 7. Front IR remote sensor 8. Projection lens 9. V ent (air intake) Do not replace the lamp immediately af ter using the projec ...

  • Mitsubishi EW330U - page 8

    EN-8 Controls and functions Pr ojector 1. Focus ring Adjusts the foc us of the projec ted image. See "Fine- tuning the image size and clarity" on page 25 for details. 2. Zoom ring Adjusts the size of the image . See "Fine-tuning the image size and clarity" on page 25 for details. 3. POWER indicator light Lights up or flashes whe ...

  • Mitsubishi EW330U - page 9

    EN-9 ENGLISH Remote control 1. POWER (ON/ST ANDBY) T oggles the projector between standby mode and on. See "Star ting up the projector" on page 21 and "Shutting down the projector" on page 34 for details. 2. FREEZE Freezes the projecte d image. See "Freezing the image" on page 33 for details. 3. Left Selects the desire ...

  • Mitsubishi EW330U - page 10

    EN-10 Using the remote control for the first time Pull the tab before using the remote control. Remote control effective range Infra-Red (IR) remote control sensor is located on the front of th e projector . The remote control must be held at an angle within 30 degrees perpendicular to the projector's IR remote control sensor to function corre ...

  • Mitsubishi EW330U - page 11

    EN-11 ENGLISH Positioning your projector Choosing a location Y our room layout or personal preference will dictate which installation location you select. T ake into consideration the size and position of your scr een, the location of a suita ble power outlet, as well as the location and distance between the projector and the rest of your equipment ...

  • Mitsubishi EW330U - page 12

    EN-12 Obtaining a pr eferr ed projected image size The distance from the projector lens to th e screen, the zoom setting (if available), and the video format each factors in the projected image size. 4:3 is the native aspect ratio of EX320U. T o be able to project a co mplete 16:9 (widescreen) aspect ratio image, the projector can resize an d scale ...

  • Mitsubishi EW330U - page 13

    EN-13 ENGLISH How to determine the position of the pr ojector for a given screen size 1. Determine the aspect ratio of your screen, 16:9 or 4:3. If you have a 4:3 screen, refer to the table labeled "(Standard)" . If you have a 16:9 screen, refer to the table labeled "(16:9)" . 2. Select your screen size. 3. Refer to the table an ...

  • Mitsubishi EW330U - page 14

    EN-14 Layout of the pr ojector Image size va ries depending on the distance b etween the screen and the projector . Front pr ojection (S tandard) EX320U EW330U Screen Distance from the screen : L Hd Diagonal Size Width : W Height: H Shortest (Wide) Longest (T ele) inch cm inch cm inch cm inch m inch m inch cm 40 102 32 81 24 61 48 1.2 63 1.6 2 5 60 ...

  • Mitsubishi EW330U - page 15

    EN-15 ENGLISH (16:9) EX320U EW330U The above figures are approximate and may be slightly different fr om the act ual measurement s. Mits ubishi recommends that if you intend to permanently install the project or , you should physically test the projection size and distance using the actual projector in suit before you permanently install it, so as ...

  • Mitsubishi EW330U - page 16

    EN-16 Connection When connecting a signal source to the projector , be sure to: 1. T urn all equipment off before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly inserted. • See the owner’s guide of each device for details about its connections. • Contact your dealer for det ails about ...

  • Mitsubishi EW330U - page 17

    EN-17 ENGLISH Connecting a monitor If you want to view your presentation close-up on a monitor as well as on the screen, you can connect the MONITOR OUT signal output jack on the projector to an external monitor following the instructions below: T o connect the projector to a monitor: 1. Connect the projector to a computer as described in "Con ...

  • Mitsubishi EW330U - page 18

    EN-18 Connecting an HDMI device Y ou should use an HDMI cable when making connection between the projector and HDMI devices. T o connect the projector to an HDMI device: 1. T a ke an HDMI cable and conne ct one end to the HDMI output port of the video device. 2. Connect the other end of th e cable to the HDMI input port on the projector . In the un ...

  • Mitsubishi EW330U - page 19

    EN-19 ENGLISH The final connection path should be like that shown in the following diagram: If the selected video image is not displayed af ter the projector is turned on and the correct video source has been selected, check that the Video source device is turned on and operating correctly . Also check that the signal cables have been connected cor ...

  • Mitsubishi EW330U - page 20

    EN-20 Connecting a composite V ideo source device Examine your V ideo source device to determine if it has a set of unused composite V ideo output sockets available: • If so, you can continue with this p rocedure. • If not, you will need to reassess which method you can use to connect to the device. T o connect the projector to a composite V id ...

  • Mitsubishi EW330U - page 21

    EN-21 ENGLISH Operation S tarting up the projector 1. Plug the power cord into the projector and into a wall socket. Turn on the wall socket switch (where fi tted). Check that the POWER indicator light on the projector lights orange after power has been applied. • Ask your insta llation specialist to pr ovide an Eart h leakage breaker . When you ...

  • Mitsubishi EW330U - page 22

    EN-22 Using the menus The projector is equipped with On-Screen Display (OSD) menus for making various adjustments and settings. Below is the overview of the OSD menu. Below is an example about how to set the OSD language. 1. Press MENU/EXIT on the projector or remote control to turn the OSD menu on. 3. Press to highlight Language and press / to sel ...

  • Mitsubishi EW330U - page 23

    EN-23 ENGLISH Utilizing the password function For security purposes and to help prevent unauthorized use, the projector includes an option for setting up password security . The password can be set through the On-Screen Display (OSD) menu. For details of the OSD menu operation, please refer to "Using the menus" on page 22 . Y ou will be i ...

  • Mitsubishi EW330U - page 24

    EN-24 Password: __ __ __ __ __ __ Keep this number in a safe place. 5. Confirm the new password by re-entering the new password. 6. Y ou have successfully assigned a new password to the projector . Remember to enter the new password next time the projector is started. 7. T o leave the OSD menu, press MENU/EXIT. Disabling the password function T o d ...

  • Mitsubishi EW330U - page 25

    EN-25 ENGLISH Adjusting the projected image Adjusting the projection angle The projector is equipped with 1 quick- release adjuster foot and 1 re ar adjuster foot. These adj usters change the image height and projection angle. T o adjust the projector: 1. Press the quick-releas e button and lift the front of the projector . Once the image is positi ...

  • Mitsubishi EW330U - page 26

    EN-26 Corr ecting keystone Keystoning refers to the situation where the projected image is noticeably wider at either the top or bottom. It occurs when the projector is not pe rpendicular to the screen. T o correct this, beside s adjusting the height of the projector , you will need to manually correct it following one of these ste ps. • Using th ...

  • Mitsubishi EW330U - page 27

    EN-27 ENGLISH Selecting the aspect ratio The 'aspect ratio' is the ratio of the image width to the image height. Most analog TV and computers are in 4:3 ratio, and digital TV and DVDs are usually in 16:9 ratio. W ith the advent of digital signal processing, digital display devices like this projector can dynamically stretch and scale the ...

  • Mitsubishi EW330U - page 28

    EN-28 5. Full : Scales an image to ful l scre en size (16:10). The image is projected to fit all over screen. (EW330U only) 4:3 picture 16:9 pi cture 16:10 picture ...

  • Mitsubishi EW330U - page 29

    EN-29 ENGLISH Optimizing the image Selecting a pictur e mode The projector is preset with several predefined picture modes so that you can choose one to suit your ope rating environment and input signal picture type. T o select a operation mode that suits your need, you can follow one of the following steps. •P r e s s MODE/ENTER on the remote co ...

  • Mitsubishi EW330U - page 30

    EN-30 Fine-tuning the image quality in user modes According to the detected signal type, there are some user -definable functions available when User 1 or User 2 mode is selected. Y ou can make adjustments to these functions based on your needs. Adjusting Brightness Highlight Brightness in the PICTURE menu and adjust the values by pressing / on the ...

  • Mitsubishi EW330U - page 31

    EN-31 ENGLISH 3D Color Management In most installation situ ations, color management will not be necessary , such as in classroom, meeting room, or lounge room situations where lights remain on, or where building external windows allow daylight into the room. Only in permanent installat ions with controlled lighting levels such as boardrooms, lectu ...

  • Mitsubishi EW330U - page 32

    EN-32 Setting the pr esentation timer The presentation timer can indicate the presentation time on the screen to help you achieve better time management when giving presentations. Follow these steps to utilize this function: 1. Press TIMER SET UP on the remote control or go to the SYSTEM SETUP: Basic > Presentation Timer menu and press MODE/ENTE ...

  • Mitsubishi EW330U - page 33

    EN-33 ENGLISH Hiding the image In order to draw the audience's full attention to the presenter , you can use BLANK on the projector or remote control to hide the screen image. Press any key on the projector or remote control to restore the image. The word ' BLANK ' appears at the lower right corner of the sc reen while the image is h ...

  • Mitsubishi EW330U - page 34

    EN-34 1. Repeat steps 1-2 above. 2. Press to highlight Volume and press / to select a desired sound level. Standby Audio Out Selecting On enables the function. The projector can output an Audio input signal when it is in standby mode and Audio input and Audio out jack is correctly connected to d evices. When the projector enters standby mode, the a ...

  • Mitsubishi EW330U - page 35

    EN-35 ENGLISH 3D W atchi ng 3D Co ntent Y ou can enjoy 3D Content with this projector . In order to watch 3D Content, you need to have the following items: 1. Field-sequential 3D video contents 2. DLP Link active electronic shutter glasses (Field-sequentia l: The syst em which displays a lternat ely the image for the left eye and the rig ht eye.) P ...

  • Mitsubishi EW330U - page 36

    EN-36 • 3D image may not appear on the screen depending on the PC performance such as graphics board, memo ry , or CPU. • The signals in the below table can be displayed with viewing 3 D Contents on the proj ector . If a different signal is fed, t he projector shows no 3D content s even with the 3D option set to On in the DISPLAY menu. • If D ...

  • Mitsubishi EW330U - page 37

    EN-37 ENGLISH Supervising and controlling by computer W ith a proper LAN cable connection and LAN Control settings, you can operate the projector from a computer using a web browser or PJLink™ application wh en the computer and the pr oje ctor are connected to th e same local area network. This projector supports Crestron ® software and PJLink ? ...

  • Mitsubishi EW330U - page 38

    EN-38 Contr olling the pr ojector r emotely thr ough a web browser (e-Contr ol™) Once you have the correct IP address for the projector and the projector is on or in standby state, you can use any computer that is on the sam e local area network to control the p rojector . When using this function, Adobe Flash Player has to be installed in your c ...

  • Mitsubishi EW330U - page 39

    EN-39 ENGLISH iv . Once set, access to the remote network operation page on this projector has been password-protecte d. T o enable this function, check the box in front of "Enable" and type in your desired password in the New Password column and confirm the new passw ord by re-entering the new password at the Confirm column. T o d isable ...

  • Mitsubishi EW330U - page 40

    EN-40 • For the specifications of PJLink™, access to the W eb site of Japan Business Machine and Information System Industries Association (JBMIA). (http://pjlink.jbmia.or .jp/english) • This projector is fully compliant to the specifications of JBMIA PJLink™ Class 1. It supports all the commands defined by PJLink™ Class 1, and the compli ...

  • Mitsubishi EW330U - page 41

    EN-41 ENGLISH • The PJLink "INPT?" will be replied only when the source is displayed on scree n. When there is no signal, only "Unavailable T ime!" will be answered. • The above-mentioned control may not be performed correctly or the monitoring data may not be obtained correctly in the following conditions: • During standb ...

  • Mitsubishi EW330U - page 42

    EN-42 Menu operation Menu system Please note that the on-screen display (OSD) menu s vary according to th e signal type selected. Main menu Sub-menu Options 1. DISPLAY Wall Screen Off/Light Yellow/Pink/Light Green/Blue/ Blackboard Aspect Ratio Auto/Real/Full (EW330U only)/4 :3/16:9 Keystone Position Phase H. Size Magnify 3D On / Off 3D Sync 1 / 2 2 ...

  • Mitsubishi EW330U - page 43

    EN-43 ENGLISH Note that the menu items are available when the projector de tects at least one valid signal. If there is no equipment connected to the projector or no signal detected, limited menu items are accessible. 4. SYSTEM SETUP: Basic Projector Position Front Tabl e/Rear Table/Re ar Ceil ing/ Front Ceiling Auto Power Off Disable/5 min/10 min/ ...

  • Mitsubishi EW330U - page 44

    EN-44 Description of each menu FUNCTION DESCRIPTION Wall Screen Corrects the projected picture’ s color w hen the projection surface is not white. See "Using W all Screen" on page 31 for details. Aspect Ratio There are four options to set the image's aspect ratio depending on your input signal source. See "Selecting the aspect ...

  • Mitsubishi EW330U - page 45

    EN-45 ENGLISH FUNCTION DESCRIPTION Setting Pre-defined picture modes are provided so you can optimize your projector image set-up to suit your program type . See "Selecting a picture mode" on page 29 for details. Brightness Adjusts the brightness of the image. See "Adjusting Brightness" on page 30 for details. Contrast Adjusts t ...

  • Mitsubishi EW330U - page 46

    EN-46 FUNCTION DESCRIPTION Presentation Timer Reminds the presenter to finish the presentation within a certain time frame. See "Setting the presentation timer" on page 32 for details. Language Sets the language for the On-Screen Display (OSD) menus. See "Using the menus" on page 22 for details. Projector Position See "Choo ...

  • Mitsubishi EW330U - page 47

    EN-47 ENGLISH FUNCTION DESCRIPTION Security Settings Change password Y ou will be asked to ente r the current password b efore changing to a new one. Power on lock See "Utilizing the password function" on page 23 for details. Closed Caption Closed Caption Enable Activates the function by selecting On when the se lected input signal carrie ...

  • Mitsubishi EW330U - page 48

    EN-48 Maintenance Car e of the pr ojector Y our projector needs little maintenance. The only thing you need to do on a regul ar basis is to keep the lens clean. Never remove any parts of the projector except the lamp. Contact your dealer if other par ts need replacing. Cleaning the lens Clean the lens whenever you notice dirt or dust on the surface ...

  • Mitsubishi EW330U - page 49

    EN-49 ENGLISH Lamp information Getting to know the lamp hour When the projector is in operation, the duration (in hours) of lamp usage is automatically calculated by the built-in timer . The method of calculating the equivalent lamp hour is as follows: T otal (equivalent) lamp hour = 1 (hours used in Low mode) + 10/7 (hours used in Standard mode) S ...

  • Mitsubishi EW330U - page 50

    EN-50 Timing of r eplacing the lamp When the lamp indicator lights up red or a message appears suggesting it is time to replace the lamp, please install a new lamp or consult your dealer . An old lamp may cause a malfunction in the projector and in some instances the lamp may explode. The LAMP indicator light and TEMPerature indicator light will li ...

  • Mitsubishi EW330U - page 51

    EN-51 ENGLISH Replacing the lamp Spare lamp for EX320U/EW330U: VL T -EX320LP • Be sure to replace the lamp with a new lamp sep arately sold that is exclusive to this projector . Contact your dealer for purchase of the lamp. • T o reduce the risk of electrical shock, always turn the projector off and disconnect the power cord before changing the ...

  • Mitsubishi EW330U - page 52

    EN-52 13. Restart the projector . Do not turn the power on with t he lamp cover remo ved. Resetting the lamp timer 14. After the startup logo, open the On-Screen Display (OSD) menu. Go to the SYSTEM SETUP: Advanced > Lamp Settings menu. Press MODE/ENTER . The Lamp Settings page is displayed. Press to highlight Reset lamp timer and press MODE/ENT ...

  • Mitsubishi EW330U - page 53

    EN-53 ENGLISH • Do not reset if the lamp is not new or replaced as this could cause damage. • This projector uses a lamp that cont ains mercury . Disposal of the lamp or the projector with the lamp may be regulated due to environment al considerations. For disposal or recycling information, please cont act your local authorities or the Electron ...

  • Mitsubishi EW330U - page 54

    EN-54 Indicators Light St atus & Description Power Te m p Lamp Power events Orange Off Off Stand-by mode Green Flashing Off Off Powering up Green Off Off Normal operation Orange Flashing Off Red • The projector needs 90 seconds to cool down as it was abnormally shut down without the normal cooling down process. • The projector needs to cool ...

  • Mitsubishi EW330U - page 55

    EN-55 ENGLISH T roubleshooting The projector does not turn on. No picture Blurred image Remote control does not work The password is incorrect The LAN function cannot be used Cause Remedy There is no power from the power cable. Plug the power cord into the AC inlet on the projector, and plug the power cord into the power outlet. If the pow er outle ...

  • Mitsubishi EW330U - page 56

    EN-56 Specifications Pr ojector specifications All specifications are subject to change without notice. General Product name DLP™ Projector Model name EX320U EW330U Optical Resolution 1024 x 768 XGA 1280 x 800 WXGA Display system 1-CHIP DMD Lens F/Number F = 2.6 to 2.9, f = 16.8 to 21.8 mm Lamp 230 W lamp Electrical Power supply AC100–240V , 50 ...

  • Mitsubishi EW330U - page 57

    EN-57 ENGLISH Dimensions 282 mm (W) x 92 mm (H ) x 229 mm (D) (Not including protrusion) T iming chart Supported timing for PC input * The projector only supports the timing (720 x 400) with 5 lines (R, G , B, H, V). * EX320U dose not support the timing of WXGA_120. 282 233 11 0 50 68.3 To l e r a n c e : ± 2 m m 229 92 Resolution Mode V ertical F ...

  • Mitsubishi EW330U - page 58

    EN-58 Supported timing for HDMI (HDCP) input * EX320U dose not support the timing of WXGA_120. Resolution Mode V ertical Frequency (Hz) Horizontal Frequency (kHz) Clock (MHz) 720 x 400 720x400_70 70.087 31.469 28.3221 640 x 480 VGA_60 59.940 31.469 25.175 VGA_72 72.809 37.861 31.500 VGA_75 75.000 37.500 31.500 VGA_85 85.008 43.269 36.000 VGA_120 1 ...

  • Mitsubishi EW330U - page 59

    EN-59 ENGLISH Supported timing for Component-YP b P r input Displaying a 1080i(1 125i)@60Hz or 1080i(1 125i)@50Hz signal may result in slight image vibration. Supported timing for V ideo and S-V ideo inputs What’ s included in the box Replacement part Signal Format Horizontal Frequency (kHz) V ertical Freq uency (Hz) 480i(525i)@60Hz 15.73 59.94 4 ...

  • Mitsubishi EW330U - page 60

    EN-44 Mitsubishi Projector W arranty , Sales Support and Ser vice Information North Amer ica MDEA (Mitsubishi Digital Electronics America, Inc.) Presentation Products Division 9351 Jeronimo Road Irvine CA 92618, USA For Warranty Registration, visit: http://www .mitsubishi-presentations.com under Customer Care Sales & Inquiries Phone :T oll Free ...

Manufacturer Mitsubishi Category Video projector

Documents that we receive from a manufacturer of a Mitsubishi EW330U can be divided into several groups. They are, among others:
- Mitsubishi technical drawings
- EW330U manuals
- Mitsubishi product data sheets
- information booklets
- or energy labels Mitsubishi EW330U
All of them are important, but the most important information from the point of view of use of the device are in the user manual Mitsubishi EW330U.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Mitsubishi EW330U, service manual, brief instructions and user manuals Mitsubishi EW330U. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Mitsubishi EW330U.

A complete manual for the device Mitsubishi EW330U, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Mitsubishi EW330U by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Mitsubishi EW330U.

A complete Mitsubishi manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Mitsubishi EW330U - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Mitsubishi EW330U, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Mitsubishi EW330U, that we can find in the current document
3. Tips how to use the basic functions of the device Mitsubishi EW330U - which should help us in our first steps of using Mitsubishi EW330U
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Mitsubishi EW330U
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Mitsubishi EW330U in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Mitsubishi EW330U?

Use the form below

If you did not solve your problem by using a manual Mitsubishi EW330U, ask a question using the form below. If a user had a similar problem with Mitsubishi EW330U it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)