Manual Jonsered CC 2145

44 pages 2.51 mb
Download

Go to site of 44

Summary
  • Jonsered CC 2145 - page 1

    FC2145 FC2145S BC2145 FC2145W CC2145 Oper ator’ s manual (EP A) Please read the oper ator’ s manual carefully and make sure y ou understand the instructions before using the machine . ...

  • Jonsered CC 2145 - page 2

    2 – English KEY T O SYMBOLS Symbols W ARNING! Clearing saws, brushcutters and trimmers can be dangerous! Careless or incorrect use can result in serious or f atal injur y to the operator or others. It is e xtremely impor tant that you read and understand the contents of the operator’ s manual. Please read the operator’ s manual carefully and ...

  • Jonsered CC 2145 - page 3

    English – 3 CONTENTS Contents Note the f ollowing bef ore star ting: Please read the oper ator’ s manual carefully . Maintenance, replacement, or repair of the emission control de vices and system may be perf ormed by any nonroad engine repair establishment or individual. This label cer tify that the product has been cer tified in accordance w ...

  • Jonsered CC 2145 - page 4

    4 – English INTR ODUCTION Dear customer! Cong ratulations on y our choice to buy a Jonsered product! Y our purchase gives y ou access to prof essional help with repairs and ser vice whene ver this ma y be necessar y . If the retailer wh o sells your machine is not one of our authorized dealers , ask for the address of y our nearest ser vicing dea ...

  • Jonsered CC 2145 - page 5

    English – 5 WHA T IS WHA T? What is what on the c learing saw? (BC 2145) 26 27 28 6 3 51 7 4 22 24 33 9 32 8 7 18 20 19 21 4 1 31 21 29 34 34 2 3 2 4 11 30 25 13 12 14 16 15 23 35 36 10 1 Grass b lade 2 Grease filler cap , bev el gear 3 Be vel gear 4 Cutting attachment guard 5 Shaft 6 Handlebar 7 Throttle control 8 Stop s witch 9 Throttle lock o ...

  • Jonsered CC 2145 - page 6

    6 – English WHA T IS WHA T? What is what on the c learing saw? (FC 2145, FC 2145 S, FC 2145 W) 24 27 25 26 23 6 3 5 13 11 12 9 7 17 8 14 16 15 21 22 18 1 4 20 18 19 28 29 30 2 3 4 10 31 9 8 7 32 1 Saw b lade 2 Grease filler cap , bev el gear 3 Be vel gear 4 Cutting attachment guard 5 Shaft 6 Handlebar 7 Throttle control 8 Stop s witch 9 Throttle ...

  • Jonsered CC 2145 - page 7

    English – 7 WHA T IS WHA T? What is what on the c learing saw? (CC 2145) 1 2 3 26 27 28 3 5 4 22 24 33 9 32 8 7 18 20 19 21 4 1 31 21 29 34 34 2 3 2 4 11 30 25 13 12 14 16 15 23 35 3 4 6 10 17 31 20 21 1 Blade 2 Grease filler cap , bev el gear 3 Be vel gear 4 Cutting attachment guard 5 Shaft 6 Handlebar 7 Throttle control 8 Stop s witch 9 Thrott ...

  • Jonsered CC 2145 - page 8

    8 – English GENERAL SAFETY PRECA UTIONS Impor tant P ersonal pr otective equipment HELMET A helmet should be w orn if the trees being cleared are taller than 2 m. HEARING PRO TECTION W ear hear ing protection that pro vides adequate noise reduction. EYE PRO TECTION Alwa ys wear approv ed eye protection. If you use a visor then you m ust also wear ...

  • Jonsered CC 2145 - page 9

    English – 9 GENERAL SAFETY PRECA UTIONS Mac hine ′ s safety equipment This section descr ibes the machine ′ s saf ety equipment, its pur pose , and how checks and maintenance should be carried out to ensure that it operates correctly . See the ”What is what?” section to locate where this equipment is positioned on your machine . The lif e ...

  • Jonsered CC 2145 - page 10

    10 – English GENERAL SAFETY PRECA UTIONS Cutting attachment guar d This guard is intended to pre vent loose objects from being thrown to wards the operator . The guard also protects the operator from accidental contact with the cutting attachment. Check that the guard is undamaged and not cr acked. Replace the guard if it has been e xposed to imp ...

  • Jonsered CC 2145 - page 11

    English – 11 GENERAL SAFETY PRECA UTIONS F or mufflers it is very impor tant that you f ollow the instructions on checking, maintaining and servicing your machine. See instructions under the heading Checking, maintaining and ser vicing the machine’ s safety equipment. Ne ver use a machine that has a f aulty muffler . Regularly check that the ...

  • Jonsered CC 2145 - page 12

    12 – English GENERAL SAFETY PRECA UTIONS Cutting equipment This section describes how to choose and maintain your cutting equipment in order to: • Reduce the risk of blade thrust. • Obtain maximum cutting perf or mance . • Extend the lif e of cutting equipment. Cutting equipment Saw b lades are intended for cutting fibrous types of w ood. ...

  • Jonsered CC 2145 - page 13

    English – 13 GENERAL SAFETY PRECA UTIONS Sharpening the sa w blade • See the cutting attachment packaging f or correct shar pening instructions. A correctly shar pened b lade is essential for w or king efficiently and to av oid unnecessar y wear to the b lade and clearing saw . • Make sure that the b lade is well suppor ted when y ou file i ...

  • Jonsered CC 2145 - page 14

    14 – English ASSEMBL Y Assembling the handlebar and thr ottle (BC 2145, CC 2145) • Remov e the screw at the rear of the throttle handle . • Slide the throttle handle onto the right side of the handlebar , (see diagram). • Align the screw hole in the throttle handle with the hole in the handlebar . • Refit the screw in the hole in the rea ...

  • Jonsered CC 2145 - page 15

    English – 15 ASSEMBL Y Assembling the cutting equipment Fitting the blade guar d/combination guar d, grass blade and ball-bearing- mounted suppor t cup • Hang the trimmer guard/combination guard (A) on the two hooks on the plate holder (M). Bend the guard around the shaft and tighten it with the bolt (L) on the opposite side of the shaft. Use t ...

  • Jonsered CC 2145 - page 16

    16 – English ASSEMBL Y Fitting the b lade guard and sa w blade • The blade guard (A) is fitted using 4 scre ws (L) as shown. CA UTION! Always use the recommended guard f or the cutting attachment you are using. See chapter on T echnical data. • Fit the drive disc (B) on the output shaft. • T ur n the blade shaft until one of the holes in t ...

  • Jonsered CC 2145 - page 17

    English – 17 ASSEMBL Y Fitting other guar ds and cutting attachments • Fit the trimmer guard/combination guard (A) intended for use with the trimmer head/plastic blades. Hang the trimmer guard/combination guard (A) on the two hooks on the plate holder (M). Bend the guard around the shaft and tighten it with the bolt (L) on the opposite side of ...

  • Jonsered CC 2145 - page 18

    18 – English ASSEMBL Y 2 Grass clearing The machine should be suppor ted in a harness when grass clearing so that the cutting equipment is parallel to the ground. V ector harness Safety release Push down the red release le ver to release the machine from the harness. Adjusting the harness 1 Tighten the hip strap so that it sits securely . 2 Tight ...

  • Jonsered CC 2145 - page 19

    English – 19 FUEL HANDLING Fuel safety Ne ver star t the machine: 1 If you ha ve spilled fuel on it. Wipe off the spillage and allow remaining fuel to e vaporate . 2 If you ha ve spilled fuel on y ourself or your clothes , change your clothes . W ash any par t of your body that has come in contact with fuel. Use soap and water . 3 If the machine ...

  • Jonsered CC 2145 - page 20

    20 – English FUEL HANDLING Mixing • Alwa ys mix the gasoline and oil in a clean container intended f or fuel. • Alwa ys star t by filling half the amount of the gasoline to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of gasoline. • Mix (shake) the fuel mixture thoroughly bef ore filli ...

  • Jonsered CC 2145 - page 21

    English – 21 ST AR TING AND ST OPPING Chec k before starting • Check the b lade to ensure that no cracks ha ve f or med at the bottom of the teeth or by the centre hole . The most common reason wh y cracks are f ormed is that shar p corners have been f or med at the bottom of the teeth while shar pening or that the b lade has been used with dul ...

  • Jonsered CC 2145 - page 22

    22 – English ST AR TING AND ST OPPING Start throttle: (FC 2145, FC 2145 S , FC 2145 W , BC 2145, CC 2145) Set the throttle to the star t position by mo ving the choke control to the choke position and then returning it to its original position. If the machine is fitted with a decompression valv e (A): Press the valv e to reduce the pressure in t ...

  • Jonsered CC 2145 - page 23

    English – 23 W ORKING TECHNIQ UES General w orking instructions Basic safety rules 1 Look around you: • T o ensure that people, animals or other things cannot aff ect your control of the machine. • T o ensure that people, animals, etc., do not come into contact with the cutting attachment or loose objects that are thrown out b y the cutting a ...

  • Jonsered CC 2145 - page 24

    24 – English W ORKING TECHNIQ UES W orking methods • Bef ore you star t clearing, check the clearing area, the type of terrain, the slope of the ground, whether there are stones, hollo ws etc. • Star t at whiche ver end of the area is easiest, and clear an open space from which to work. • W or k systematically to and fro across the area, cl ...

  • Jonsered CC 2145 - page 25

    English – 25 W ORKING TECHNIQ UES • T o fell a tree f orwards, the bottom of the tree should be pulled backw ards. Pull the blade bac kwards with a quick, firm movement. • Large stems must be cut from two sides . First deter mine which direction the stem will f all. Make the first cut on the f elling side. Then finish cutting the stem from ...

  • Jonsered CC 2145 - page 26

    26 – English W ORKING TECHNIQ UES Grass trimming with a trimmer head T rimming • Hold the trimmer head just above the g round at an angle. It is the end of the cord that does the work. Let the cord work at its own pace. Nev er press the cord into the area to be cut. • The cord can easily remov e grass and weeds up against walls , fences , tre ...

  • Jonsered CC 2145 - page 27

    English – 27 MAINTENANCE Carb uretor Y our Jonsered product has been designed and manuf actured to specifications that reduce harmful exhaust fumes. The engine will be run in after it has used 8-10 tanks of fuel. T o ensure that the engine runs at peak performance and produces as little harmful exhaust fumes as possible after the running-in per ...

  • Jonsered CC 2145 - page 28

    28 – English MAINTENANCE Fine adjustment of the idle speed T Adjust the idle speed using the idle adjustment screw T , if it is necessar y to readjust. First tur n the idle adjustment scre w T clockwise until the cutting attachment starts to rotate. Then turn the screw anticlockwise until the cutting attachment stops. The idle speed is correctly ...

  • Jonsered CC 2145 - page 29

    English – 29 MAINTENANCE Adjusting the start throttle speed (BC 2145, CC 2145) The correct star t throttle speed is set by means of an adjuster on the rear of the handle ne xt to the cable. Use this screw (5 mm Allen screw) to increase or decrease the start throttle speed. Proceed as f ollows: 1 Run the machine at idle. 2 Press the star t throttl ...

  • Jonsered CC 2145 - page 30

    30 – English MAINTENANCE Cleaning the air filter Remov e the air filter cov er and take out the filter . W ash it clean in warm, soapy w ater . An oiled f oam plastic filter (av ailable as an accessory) must be used if the machine is operated in e xtremely dusty conditions. See instructions under the heading Oiling the air filter . Oiling th ...

  • Jonsered CC 2145 - page 31

    English – 31 MAINTENANCE Winter use Running problems can occur when using the machine in the cold and snowy conditions caused b y: • T oo low engine temperature. • Icing of the air filter and carburetor . Special measures are theref ore often required: • P ar tly mask the air inlet on the star ter to increase the working temperature of the ...

  • Jonsered CC 2145 - page 32

    32 – English MAINTENANCE Maintenance sc hedule The f ollowing is a list of the maintenance that must be perf or med on the machine . Most of the items are described in the Maintenance section. The user must only carr y out the maintenance and service work descr ibed in this manual. More e xtensive work must be carried out by an authorised ser vic ...

  • Jonsered CC 2145 - page 33

    English – 33 TECHNICAL D A T A T echnical data Note 1: Equivalent sound pressure le vel is calculated as the time-weighted energy total f or sound pressure le vels under v arious working conditions with the follo wing time distribution: 1/2 idling and 1/2 max speed. NO TE! Noise pressure at the user’ s ear and vibration on the handles are measu ...

  • Jonsered CC 2145 - page 34

    34 – English TECHNICAL D A T A Note 1: Equivalent sound pressure le vel is calculated as the time-weighted energy total f or sound pressure le vels under v arious working conditions with the follo wing time distribution: 1/2 idling and 1/2 max speed. NO TE! Noise pressure at the user’ s ear and vibration on the handles are measured with all the ...

  • Jonsered CC 2145 - page 35

    English – 35 TECHNICAL D A T A BC 2145 Appro ved accessories T ype Cutting attachment guard, Ar t. no. Centre hole in blades/cutters , Ø 25,4 mm Output shaft thread M12 Grass b lade/grass cutter Multi 255-3 (Ø 255 3 teeth) 537 28 85-02 Multi 275-4 (Ø 275 4 teeth) 537 28 85-02 Multi 300-3 (Ø 300 3 teeth) 537 28 85-02 Saw b lade Opti XS 200-22 ...

  • Jonsered CC 2145 - page 36

    36 – English FEDERAL EMISSION CONTR OL W ARRANTY ST A TEMENT Y OUR W ARRANTY RIGHTS AND OBLIGA TIONS The EP A (The US Environmental Protection Agency), Environment Canada and Jonsered are pleased to e xplain the emissions control system warranty on y our 2001 and later small nonroad engine. In U .S. and Canada, new small nonroad engines must be d ...

  • Jonsered CC 2145 - page 37

    1 Poly T rim 2 3 4 5 6 7 8 <20mm >20mm ! B A 6 Nm X 10 ...

  • Jonsered CC 2145 - page 38

    1 2 3 4 5 6 7 8 9 35-50 NM ~ 15 cm 6' "Clic" ~ 3,5 m 11 ' 7,0 m 23' 2,4-3,3 mm .095"-.130" 12 cm 5" T rimmy SII ...

  • Jonsered CC 2145 - page 39

    ...

  • Jonsered CC 2145 - page 40

    2,7-3,3 mm .106-.130" 15 cm 6" 15 cm 6" 15 cm 6" 15 cm 6" 1 2 3 5 6 7 10 11 1.) 2.) >1,1 Kw <1,1 Kw 2,7 mm - 9,0 m 3,0 mm - 7,5 m 3,3 mm - 6,0 m 4 8 Auto 55 ...

  • Jonsered CC 2145 - page 41

    "Clic" 1 2 3 5 6 7 9 10 m 32' 4 8 4,3 m 14' 2,7-3,3 mm .106-.13" 10 cm 4" 6" 15 cm T ap n’Go 45 Spin ...

  • Jonsered CC 2145 - page 42

    ´®z+Rvy¶5s¨ ´®z+Rvy¶5s¨ ...

  • Jonsered CC 2145 - page 43

    ...

  • Jonsered CC 2145 - page 44

    ´®z+Rvy¶5s¨ 2008-02-08 ´®z+Rvy¶5s¨ 1150868-95 ...

Manufacturer Jonsered Category Trimmer

Documents that we receive from a manufacturer of a Jonsered CC 2145 can be divided into several groups. They are, among others:
- Jonsered technical drawings
- CC 2145 manuals
- Jonsered product data sheets
- information booklets
- or energy labels Jonsered CC 2145
All of them are important, but the most important information from the point of view of use of the device are in the user manual Jonsered CC 2145.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Jonsered CC 2145, service manual, brief instructions and user manuals Jonsered CC 2145. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Jonsered CC 2145.

Similar manuals

A complete manual for the device Jonsered CC 2145, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Jonsered CC 2145 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Jonsered CC 2145.

A complete Jonsered manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Jonsered CC 2145 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Jonsered CC 2145, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Jonsered CC 2145, that we can find in the current document
3. Tips how to use the basic functions of the device Jonsered CC 2145 - which should help us in our first steps of using Jonsered CC 2145
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Jonsered CC 2145
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Jonsered CC 2145 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Jonsered CC 2145?

Use the form below

If you did not solve your problem by using a manual Jonsered CC 2145, ask a question using the form below. If a user had a similar problem with Jonsered CC 2145 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)