English dropdown-ico

Manual Kyocera FS-1118MFP

34 pages 1.47 mb
Download

Go to site of 34

Summary
  • Kyocera FS-1118MFP - page 1

    Network Scanner Setup Guide KM-1820 FS-1118MFP ...

  • Kyocera FS-1118MFP - page 2

    The KM-1820 model is appli cable to USA, Canada, a nd the Asia Pacific region. The FS-1118MFP model is applicab le to Europe and Australasia. ...

  • Kyocera FS-1118MFP - page 3

    NETWORK SCANNER SETUP GUIDE i Introduction About this Guide This guide contains instructions on the init ial setup of the scanner functions and th e basic procedures for using this mach ine as a network scanner. T rademark Information • Microsoft, Windows, Windo ws NT and Internet Explorer are registe red trademarks of Microsof t Corporatio n of ...

  • Kyocera FS-1118MFP - page 4

    Introduction ii NETWORK SCANNER SETUP GUID E Getting connected The following procedures are required in order to use this machine as a scanner . Connect the machine to your PC (Example Co nnection) Connecting the scanne r to your PC network with a net work cable (100BASE-T X or 10BASE-T) Page 1 Next Page FAX (Option) Send FTP Sends the scanned imag ...

  • Kyocera FS-1118MFP - page 5

    Introduction NETWORK SCANNER SETUP GUIDE iii Perform the required op eration at the machine Perform the required op eration at the PC Network settings (register the IP address, subnet mask, etc.) Page 5 Date and Time settings (register the time zone, date and time, etc.) Page 3 2 Accessing COMMAND CENTER (Internal HTML web pag e) • Advanced TCP/I ...

  • Kyocera FS-1118MFP - page 6

    Introduction iv NETWORK SCANNER SETUP GUID E ...

  • Kyocera FS-1118MFP - page 7

    NETWORK SCANNER SETUP GUIDE v Content s Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i About this Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i T rademark Informa ...

  • Kyocera FS-1118MFP - page 8

    Contents vi NETWORK SCANNER SETUP GUIDE ...

  • Kyocera FS-1118MFP - page 9

    NETWORK SCANNER SETUP GUIDE 1 1 Prep arations Connecting the Cables The machine can be connecte d to a network or directly to a PC. Connecting the Network Cable When connecting the mach ine to the netw ork, use the a ppropriate ne twork cable (10BASE-T or 100BASE-TX). 1 Ensure the machine is off, and remove the power cord fr om the outlet. 2 Connec ...

  • Kyocera FS-1118MFP - page 10

    Preparations 2 NETWORK SCANNER SETUP GUIDE 2 Connect the printer cable to the appropriate connector located at the rear of the machine. 3 Connect the other end of the prin ter cable to the appropriate connector on you r PC. Connecting the Power Cord Connect the power cord to the rear of the machine. Connect the other end to a suitable power outle t ...

  • Kyocera FS-1118MFP - page 11

    NETWORK SCANNER SETUP GUIDE 3 2S e t u p Date and Time Settings Setting the Time Zone You can also make this setting usin g the COMMAND CENT E R. For details on COMMAND CENTER, refer to Accessing COMMAND CENTER on page 7. 1 Access Time Zone . 2 Press S or T to select the time zone that you are in. 3 Press Enter . The me ss ag e dis play shows Compl ...

  • Kyocera FS-1118MFP - page 12

    Setup 4 NETWORK SCANNER SETUP GUIDE Setting the Curren t Date and Time You can also make this se tting using COMMAN D CENTER. NOTE: Per iodically check the time that is sh own in the me ssage display and adju st as necessar y to matc h the current time . 1 Press S or T to select Year/Time . 2 Press Enter . The date settin g screen (year:month :day) ...

  • Kyocera FS-1118MFP - page 13

    Setup NETWORK SCANNER SETUP GUIDE 5 Network Settings Registering the IP Address Check the IP address with your network admi nistrator before changing this setting. You can enter an IP address only when the DHCP setting is Off and the TCP/IP setting is On . Any changes made to the networ k settings will only become effective afte r you tur n the mac ...

  • Kyocera FS-1118MFP - page 14

    Setup 6 NETWORK SCANNER SETUP GUIDE Registering the Subnet Mask 1 Press S or T to select Subnet Mask . 2 Press Enter . 3 Use the numeric keys to enter each se g m en t of th e Sub n e t Mask in turn, pressing X or [*.] to move between segments. If you make an e r ror in entering a portion of the Subnet M ask, press W to return to the previous block ...

  • Kyocera FS-1118MFP - page 15

    Setup NETWORK SCANNER SETUP GUIDE 7 Accessing COMMAND CENTER COMMAND CENTER refers to the machine’s integrated web-based interface. This enables you to verify the o perating st atus of the m achine and ch ange settings related to security, network printing, e-mail transmission and ad vanced networking. 1 Open the web browser. 2 In the Address or ...

  • Kyocera FS-1118MFP - page 16

    Setup 8 NETWORK SCANNER SETUP GUIDE The table below lists the settings disp laye d on the TCP/IP Ge neral Settings page. E-mail Setting The following procedure expla ins the method for attaching scanned data to an e-mail for transmission. Scan to e-mail works within the following envir onments: • It must have a network envir onment in which this ...

  • Kyocera FS-1118MFP - page 17

    Setup NETWORK SCANNER SETUP GUIDE 9 Advanced > E-mail > SMTP > General p age The scanner system network co mponent offers e-mail fu nctionality. SMTP is an embedded protocol to supp ort this function . To use the e-mail f unction, the scan ner system should be connected to an e-mail server using the POP3 pr otocol. ...

  • Kyocera FS-1118MFP - page 18

    Setup 10 NETWORK SCANNER SETUP GUIDE The table below lists the settings displayed on the SMT P Protocol Settings page. Item Description SMTP Protocol Enables or disables SMTP pro tocol. T o us e e-mail, this protocol must be e nabled. SMTP Port Number Set the SMTP Port Number or use the SMTP defau lt port 25. SMTP Server Name Enter the SMTP server ...

  • Kyocera FS-1118MFP - page 19

    Setup NETWORK SCANNER SETUP GUIDE 11 Enabling SMB Function The SMB function enables scanned imag es to be stored as individual files in a folder on your PC. The SMB parameters can be set through th e COMMAND CENTER. The following informa tion about each server needs to be registe red on this machine. • Login user name (usin g op e ra tio n panel) ...

  • Kyocera FS-1118MFP - page 20

    Setup 12 NETWORK SCANNER SETUP GUIDE Enabling FTP Function The FTP transmission function converts th e data of orig inals scanned on this machine to the PDF, TI FF, or JPEG format and uploads it di rectly to an F TP server. The FTP parameters can be set thr ough the COMMAND CENTER. The following information is requ ired ab out each server in order ...

  • Kyocera FS-1118MFP - page 21

    Setup NETWORK SCANNER SETUP GUIDE 13 Registering the Address Book This machine has an addre ss book function. Whe n an e-mail addr ess, the path to a PC folder (SMB), FTP server's path, a nd FAX number are registered in the address book, it can transmit direct ly from the oper ation panel. Basic > Address Book p ag e The Address Book page a ...

  • Kyocera FS-1118MFP - page 22

    Setup 14 NETWORK SCANNER SETUP GUIDE Adding a New Cont act 1 Open the Addres s Book Contacts pa ge . 2 Click Add Contact and enter the information for the contact. You can specify a fax number even if the FAX System is not installed. 3 Click Submit . ...

  • Kyocera FS-1118MFP - page 23

    Setup NETWORK SCANNER SETUP GUIDE 15 The table below lists the settings displaye d on the Address Book Contacts Add page. Editing a Cont act 1 Open the Addres s Book Contacts pa ge . 2 Click the Number or Name of the contact. 3 Modify the information of the contact. 4 Click Submit . Adding a New Group 1 Open the Addres s Book Groups page . 2 Click ...

  • Kyocera FS-1118MFP - page 24

    Setup 16 NETWORK SCANNER SETUP GUIDE Editing the Group 1 Open the Addres s Book Groups page . 2 Click the number or name of the group to be edited. 3 Click Add Members to add the contacts to the group or click Delete Me mbers to delete the contacts from the group. You can only ad d one SMB or FTP address to a group. 4 Click Submit . Registering Ext ...

  • Kyocera FS-1118MFP - page 25

    Setup NETWORK SCANNER SETUP GUIDE 17 The table below lists the settin gs displaye d on the LDAP page. Registering User Login If the administrator has enabled the User Login function, you will need to enter your User ID and password in order to use the ma chine. Th e factory defa ult User ID an d Password is 1118. Basic > Security > User Login ...

  • Kyocera FS-1118MFP - page 26

    Setup 18 NETWORK SCANNER SETUP GUIDE Adding a New User Login 1 Open the User Log in page. 2 Click Add and enter the information of the user need ed for the User Login. 3 Click Submit . Editing the User Login 1 Open the User Log in page. 2 Click the desired number or na me to edit the us er and modify their information. 3 Click Submit . Deleting the ...

  • Kyocera FS-1118MFP - page 27

    Setup NETWORK SCANNER SETUP GUIDE 19 Entering User Login If the message dis pla y pr om p ts you to login, follow the instruc tions below: 1 Use the numeric keys to enter the User ID . 2 When the passw ord has been set, press T to select Password , use the numeric keys to enter the Password and press Enter . The basic screen is displayed. If the ad ...

  • Kyocera FS-1118MFP - page 28

    Setup 20 NETWORK SCANNER SETUP GUIDE ...

  • Kyocera FS-1118MFP - page 29

    NETWORK SCANNER SETUP GUIDE 21 3 Operation Basic Scanning Procedure You can scan docu ments and send them to e- mail addresse s or a folder. The folder can be on a PC or FTP server. The recipient’s add ress ca n be entered from an internal address bo ok, external address book (LDAP) or using a one -touch key. 1 Press Send . 2 Press X . 3 Press S ...

  • Kyocera FS-1118MFP - page 30

    Operation 22 NETWORK SCANNER SETUP GUIDE 5 Press S or T to select a desired name and press Enter . 6 Press S or T to select the de stina tion an d press Enter . When the (SMB or FTP) is selected, the login user name input screen is displayed. When the ( E-mail) or (FAX) is selected, the display shows Completed and returns to the basic screen. Proce ...

  • Kyocera FS-1118MFP - page 31

    Operation NETWORK SCANNER SETUP GUIDE 23 9 Press lef t Select . 10 Press S or T to select the original placement required and press Enter . The display shows Completed and returns to the basic screen. Using the Pl aten Using the Document Processor : S a l e s _01 Re a dy t o s e n d. Dest . Sub je c t Pl a c e m nt Le f t O f f :1 O r i g. P l acem ...

  • Kyocera FS-1118MFP - page 32

    Operation 24 NETWORK SCANNER SETUP GUIDE 11 Place the original document in the document processor o r on the pl aten. 12 Program the settings as required to use additional functions. To change the default value, re fer to Function Defaults in the table below. 13 Press Start . The Scanning screen is displayed and scanning will begin. Function Defaul ...

  • Kyocera FS-1118MFP - page 33

    A1 ...

  • Kyocera FS-1118MFP - page 34

    Rev. 1.0 2005.12 ©2005 KYOCERA MITA Corporation All rights reserved. ...

Manufacturer Kyocera Category Network Router

Documents that we receive from a manufacturer of a Kyocera FS-1118MFP can be divided into several groups. They are, among others:
- Kyocera technical drawings
- FS-1118MFP manuals
- Kyocera product data sheets
- information booklets
- or energy labels Kyocera FS-1118MFP
All of them are important, but the most important information from the point of view of use of the device are in the user manual Kyocera FS-1118MFP.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Kyocera FS-1118MFP, service manual, brief instructions and user manuals Kyocera FS-1118MFP. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Kyocera FS-1118MFP.

Similar manuals

A complete manual for the device Kyocera FS-1118MFP, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Kyocera FS-1118MFP by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Kyocera FS-1118MFP.

A complete Kyocera manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Kyocera FS-1118MFP - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Kyocera FS-1118MFP, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Kyocera FS-1118MFP, that we can find in the current document
3. Tips how to use the basic functions of the device Kyocera FS-1118MFP - which should help us in our first steps of using Kyocera FS-1118MFP
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Kyocera FS-1118MFP
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Kyocera FS-1118MFP in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Kyocera FS-1118MFP?

Use the form below

If you did not solve your problem by using a manual Kyocera FS-1118MFP, ask a question using the form below. If a user had a similar problem with Kyocera FS-1118MFP it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)