Manual Philips DSR 1000

26 pages 0.41 mb
Download

Go to site of 26

Summary
  • Philips DSR 1000 - page 1

    ...

  • Philips DSR 1000 - page 2

    Dear customer , Congratulations on your choice of Philips DSR 1000 satellite receiver . This Philips satellite receiver will allow you to obtain digital satellite programmes and services. We wish you much viewing pleasure with your new Philips DSR 1000. Note: This product is intended for Germany , Austria and Italy . CONTENTS 1. SAFETY INSTRUCTION ...

  • Philips DSR 1000 - page 3

    SAFETY INSTR UCTION Important remarks on operation The following section contains important remarks concerning the operation, location and connection of the receiver . Please read these instructions carefully before using the unit for the first time. Extended absence/use during adver se weather conditions Always switch off the unit during periods o ...

  • Philips DSR 1000 - page 4

    GB 3 Impor tant remarks on location and assembl y Location All electronic equipment generates heat, which is however not dangerous. Delicate furniture surfaces and finishes may become slightly discoloured over time due to the permanent heat source. Likewise, the feet of the equipment may cause discolouring on treated surfaces. If need be, place the ...

  • Philips DSR 1000 - page 5

    4 CONNECTIONS The following connections are located on the back of the unit: 1 - 230 V/50 Hz: Connect the power cable to the power socket. 2 - A UDIO TV L & R: Audio output, left and right-hand channel for connecting to a stereo unit. 3 - TV : Connect the TV connection socket to your television unit using the SCART cable supplied. 4 - VCR: VCR ...

  • Philips DSR 1000 - page 6

    Y OUR REMO TE 5 GB F : Choose favourite channel list Menu: Change transparency of On-Screen-Display (OSD). I : Display Short and extended information (if broadcasted) about current and next pro- grammes. V : Change channels up by one unit. Menu: Choose previous parameter . c c : Mute: turn the sound off/on. RC : Detailed Remote Control func- tions ...

  • Philips DSR 1000 - page 7

    OPERA TING Y OUR UNIT 3.1 LOCAL OPERA TION Open (and close) the flap on the front of the unit by pressing the marked area (on the right-hand side). Local operation is by means of the keys ST ANDBY , V and W for switching between channels upwards/downwards (CH -/+), as well as C and B for adjusting the volume (VOL -/+). T o switch between radio and ...

  • Philips DSR 1000 - page 8

    3.2 REMO TE CONTR OL FUNCTIONS Switching on fr om standby mode is done using the red ke y or using the number keys 0 ... 9 . The unit software contains a functional description for the remote control. T o consult this, simply press the RC key on the remote control and then the keys for which you require assistance - the appropriate help instruction ...

  • Philips DSR 1000 - page 9

    A favourite list is a list in which channels selected from a channel pool can be organised. By default the names of the favourite lists are pre-defined similar to the following example. However , the name of the favourite list can be changed according to individual preferences. Each favourite list has the available channel numbers P000....P999. Fav ...

  • Philips DSR 1000 - page 10

    9 GB 3.6 SELECTING THE CHANNEL LANGU A GE Press the A key to display the language selection menu. The number of available languages depends on the particular channel. The choice of language is made as usual using the W and V keys. The language originally set remains selected when you quit the menu using the E key . The selected language is stored w ...

  • Philips DSR 1000 - page 11

    Deleting timer programming: 1...8 Select the timer row to be deleted using the number keys 1 ... 8 or the W or V key OK and delete the programmed data using the OK key . N.B.: If you accidentally delete a ro w and wish to reconstitute the or iginal information, e xit the timer menu b y pressing the E ke y twice. N.B.: The time and date are programm ...

  • Philips DSR 1000 - page 12

    MENU STR UCTURE 4.1 CHANNELS 4.1.1 Fa vourite list Call up the main menu using the M key and then press the OK key twice. Sorting, swapping, copying and deleting channels - in one single men u! i Select one of the favourite lists 0...9. M Select the relevant satellite (e.g. Astra, Eutelsat or other). TV Select the channel source (e.g. NEW or ALL ch ...

  • Philips DSR 1000 - page 13

    Switching to the left menu window is done using the W and V keys; switching to the right menu window is done using the C and B keys. The highlighting of the windows heading and channel will show which window is active. For each action (copying, swapping or deleting) you thus see the appropriate TV channel in the current window . The search function ...

  • Philips DSR 1000 - page 14

    4.1.3 Channel pool (f or adv anced users) The channel pool contains all channels in alphabetical order . Selection depending on satellite is done using the M key; free or encrypted channels are chosen by pressing the TV key . All free (or all encrypted) channels on the selected satellite are contained in the «All Free» section, also the new free ...

  • Philips DSR 1000 - page 15

    4.1.4 P arental control The five-digit security code (PIN) is set to 0 0 0 0 0 in the factory by default. a) Changing the security code (PIN) Select the «Parental control» menu using key 4 from the Main menu «Channels». Then select the {PIN} input field using key 2 or the W key and activate it by pressing the OK key . Enter the ‘ old ’ and ...

  • Philips DSR 1000 - page 16

    4.2 SEARCH MODE 4.2.1 Satellite searc h mode Satellite search mode is performed for all frequencies on the selected satellite. Select the desired settings in the menu sequence. Selecting the individual parameters is performed after activating using the OK key and then using the B or C key . We recommend launching the search mode occasionally in ord ...

  • Philips DSR 1000 - page 17

    16 4.3 SA TELLITES The ASTRA 19.2° and Eutelsat 13° (Hotbird) satellites are activated as per the default factory settings. Six other satellites are pre-programmed, but not activated. If you expand your reception equipment, you can make the required settings and activations for the pre-programmed satellites in the ‘Satellite’ menu. Activate t ...

  • Philips DSR 1000 - page 18

    4.4.2 Menu language (1) Select language . The menu language can be switched between {{German}, {English}, {French}, {Italian}, {Spanish}, {Dutch} and {T urkish}. (2) Select character set . Automatic switching of the character set is defined in the DVB standard - however unfortunately not all stations observe this standard with the result that chara ...

  • Philips DSR 1000 - page 19

    4.4.4 LNB settings (1) LNB {ON} standard setting {OFF} operation without LNB signal (e.g. only with special cabling systems) (2) In standby mode {OFF} standard setting N.B.: For certain units only use the {OFF} setting, as otherwise the receiver continues to supply po wer to the LNB also in standby mode. The power consumption of the receiver can th ...

  • Philips DSR 1000 - page 20

    4.4.6 Download Over Air (software update via satellite) Y ou can update the operating software and the channel lists (each individually) for your receiver via the ASTRA satellite (update via Download Over Air) using the Download sub-menu. The data for various units are transferred consecutively on a special receiving channel (thus the term data car ...

  • Philips DSR 1000 - page 21

    GLOSSAR Y Band Frequency band of a satellite. Low band and high band. CA Conditional Access: denotes encrypted channels. CVBS Composite Video Burst Sync: video standard for TV or VCR equipment. DiSEqC Digital Satellite Equipment Control DV B Digital Video Broadcast EPG Electronic Programme Guide Fa vourite list List of selected channels from the ch ...

  • Philips DSR 1000 - page 22

    TECHNICAL D A T A Channels • 2000 storage positions for TV channels and for 2000 radio channels. • 10 individually definable favourite lists each containing 1000 channel positions (e.g. for channel types SPORT , NEWS, MUSIC etc.). • 8 satellites (individually activatable). • 24 characters for channel and/or station names. • Channel select ...

  • Philips DSR 1000 - page 23

    RF range • Sat-IF frequency range 950 - 2150 MHz • Input level ranges 43 - 83 dBµV • Reception threshold (EB/NO) < 4.5 dB TV system digital • Modulation, FEC, demultiplexer DVB-S standard • Video resolution CCIR 601 (720 x 576) • Input data rate 2 - 45 Msymbol/s • Bit rate 1.5 - 15 MBit/s • Video voltage/impedance 1 V/75 Ohm • ...

  • Philips DSR 1000 - page 24

    TR OUBLESHOO TING When you have problems with your Philips DSR 1000, first check following points. 23 GB PROBLEM No picture, no sound and no front panel display . No picture, no sound ; but the front panel shows the time or “--”. No picture, no sound ; but the indication on the front of the receiver is correct. Only the main menu and the corres ...

  • Philips DSR 1000 - page 25

    ...

  • Philips DSR 1000 - page 26

    DFU DSR 1000 - 31 1 1 176 51003 03 / 03 ...

Manufacturer Philips Category Satellite TV System

Documents that we receive from a manufacturer of a Philips DSR 1000 can be divided into several groups. They are, among others:
- Philips technical drawings
- DSR 1000 manuals
- Philips product data sheets
- information booklets
- or energy labels Philips DSR 1000
All of them are important, but the most important information from the point of view of use of the device are in the user manual Philips DSR 1000.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Philips DSR 1000, service manual, brief instructions and user manuals Philips DSR 1000. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Philips DSR 1000.

Similar manuals

A complete manual for the device Philips DSR 1000, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Philips DSR 1000 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Philips DSR 1000.

A complete Philips manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Philips DSR 1000 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Philips DSR 1000, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Philips DSR 1000, that we can find in the current document
3. Tips how to use the basic functions of the device Philips DSR 1000 - which should help us in our first steps of using Philips DSR 1000
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Philips DSR 1000
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Philips DSR 1000 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Philips DSR 1000?

Use the form below

If you did not solve your problem by using a manual Philips DSR 1000, ask a question using the form below. If a user had a similar problem with Philips DSR 1000 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)