Manual NEC 824

96 pages 1.06 mb
Download

Go to site of 96

Summary
  • NEC 824 - page 1

    Multibutton T elephone Feature Handbook P/N 82400MFH04 April 2001 Printed in U.S.A. 82400mfh05CVR.QXD 3/30/01 9:26 AM Page 2 ...

  • NEC 824 - page 2

    This manual has been developed by NEC America. It is intended for the use of its customers and service personnel, and should be read in its entirety before attempting to install or program the system. Any comments or suggestions for improving this manual would be appreci- ated. Forward your remarks to: NEC America Inc., Corporate Networks Group 4 F ...

  • NEC 824 - page 3

    Using Y our T elephone .....................................................1 Calling a Co-W orker . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Outside Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Handling And Rerouting Y our Calls . . . . . . . . . . . . . . .3 When Y our Call Can't Go Through . . . . . . . ...

  • NEC 824 - page 4

    Microphone Mute..........................................................45 Name/Message Storing..................................................46 Night Answer (Off-Hours Ringing) ................................49 Off-Hook Signaling .......................................................50 Outside Calls, Answering ............................... ...

  • NEC 824 - page 5

    Using Y our T elephone Y our telephone's Alphanumeric Display helps you use features and tells you about your calls. For example, you can see the name of a co- worker who calls you. (Y ou may also be able to change the time and date on your phone if it's not correct. T urn to page 78 for more.) Press a One-T ouch Key for one-button contac ...

  • NEC 824 - page 6

    Calling a Co-W orker Y ou can dial a co-worker on the Intercom (page 39), or use Paging (page 58) if you don't know where they are. V isitors at your entrance door can call you on the Intercom using a Door Box (page 31). Outside Calls Y ou can Answer Outside Calls that ring your phone or flash your line keys (page 52). Night Service (page 49) ...

  • NEC 824 - page 7

    Handling And Rerouting Y our Calls Use Hold (page 36) to have your call wait at your phone. Or , if your system is a Portrait 824, Park it in orbit for a co-worker (page 14). Have a call for a co-worker? T ransfer it to them (page 79). When you leave your desk, think about Call Forwarding your calls to someone else (page 1 1). Or , if you want your ...

  • NEC 824 - page 8

    There's no need to keep redialing your outside call if it's busy or unan- swered - use Repeat Dial instead (page 62 ). And when your system's lines are busy , Line Queuing (page 53) lets you wait for a free one. W ith Selectable Display Messages , send a message to your busy co- worker's display phone (page 65). They can reply w ...

  • NEC 824 - page 9

    When Y ou W ork In Groups If you and your co-workers handle each other's calls, you might want to have Extension Hunt Groups (page 33). Someone calling your group's number goes through to the first available extension. If there is no answer at that exten- sion, a co-worker can try the next extension in line using Step Calling (page 76). T ...

  • NEC 824 - page 10

    Have a T elephone Meeting Conference (page 23) allows you to quickly set up a telephone meeting. Use Meet Me Conference (page 41) to set up a meeting which lets others join if they choose. Optionally , you can also use Meet Me Page to set up a meeting on a page zone. T o join two outside callers togeth- er and leave them to talk privately , use T a ...

  • NEC 824 - page 11

    extension can make a voice announced Intercom call over the speaker of both 'executive' extensions. The users at the executive extensions can reply Handsfree and all three parties can talk. T ired of always reaching for the handset or cradling it under your chin while you type? Install a headset and enable Headset Operation (page 36). Per ...

  • NEC 824 - page 12

    Y our Multibutton Phone Volume/Contrast Control 82400 - 1 1 1 7 7 2 2 8 8 3 3 9 9 4 4 10 10 5 5 11 LND FTR 6 6 12 CHECK CLEAR Q_Z PRS GHI ABC Clear Check Line keys One-touch keys Feature Last Number Dial Message Waiting lamp Room Monitor lamp Intercom Dial Control Transfer Flash Speaker Do Not Disturb/Conference Hold Microphone Mute Microphone Hand ...

  • NEC 824 - page 13

    Account Codes Account Codes are codes you enter that help keep track of outside calls. There are two types of Account Codes: Optional and Forced. W ith optional codes, the Account Codes you enter are solely for cate- gorizing your calls. For example, if you work in an accounting firm that must bill back customers for time on the phone, Optional Acc ...

  • NEC 824 - page 14

    1 . Press . 2. Press . ● If pr ogrammed as a One-T ouch key , pr ess the One-T ouch key instead. 3. Dial to set the first alarm or dial to set the second alarm. 4. Dial time in terms of a 24-hour clock. ● For example, dial 1545 for 3:45 PM. 5. Dial . 6. T o hang up, press . 1. Press . 2. Press . 3. Dial to check the first alarm or dial to check ...

  • NEC 824 - page 15

    1. Press . 2. Press . ● If pr ogrammed as a One-T ouch key , pr ess the One-T ouch key instead. 3. Dial to cancel the first alarm or dial to cancel the second alarm. 4. Dial . 5. T o hang up, press . Background Music (Portrait 824 only) Background Music (BGM) sends music from an FM receiver , tape deck or CD player your company provides to the sp ...

  • NEC 824 - page 16

    ● 2 = Call Forward When Unanswer ed Forwarded only if the call is unanswered. ● 3 = Call Forward When Busy / Unanswer ed Forwarded only when the extension is busy or unanswered. Call Forwarding will reroute all calls, including calls transferred from another extension. Y ou must enable Call Forwarding from your phone. Executive Call Forwarding ...

  • NEC 824 - page 17

    ● 3 = Call Forward When Busy / Unanswered - Forwarded only when the extension is busy or unanswer ed. - Listen for: one short beep as confirma- tion of pr ocedure or one long beep indicating call cannot be forwar ded to that extension. - Note: If no code is entered, all calls forwar d immediately to the destination extension. 5. Press . 1. Press ...

  • NEC 824 - page 18

    Call Parking (Portait 824 Only) Call Parking allows you to place an outside call in a waiting state (called a Park orbit) so that any other keyset extension within the same Park group may pick it up. After parking the call, you can Page the person receiving the call and hang up. The paged party just presses the Park key from any extension within th ...

  • NEC 824 - page 19

    while on a call. Y ou can also time Intercom calls or use the idle tele- phone as a stopwatch. 1. Press to start timing. 2. Press again to stop timing. 3. Press to return to the date and time. Call W aiting (Camp On) After you call a busy extension, use Call W aiting to wait in line (i.e., Camp On) without hanging up. When you Camp On, the system s ...

  • NEC 824 - page 20

    Caller ID Caller ID allows a display keyset to show an incoming caller ’ s tele- phone number and/or name with the time and date on the phone’ s display . The caller ’ s information can be checked before answering an incoming call. The information received by the system depends upon the capabilities of your local telco. There are two types of ...

  • NEC 824 - page 21

    T emporary Memory When a call is abandoned or the Caller ID table is full, the caller ’ s information will be stored in the T emporary Memory (up to 24 Caller ID names and numbers). If the T emporary Memory is full, the oldest Caller ID information will automatically be deleted and the new infor- mation will be stored in it’ s place. The T empo ...

  • NEC 824 - page 22

    1. Answer call. 2. Press and dial . ● If a confirmation tone (one short beep) is hear d, the information was success- fully stor ed in the next empty memory bin in the Caller ID T able. If an err or tone (thr ee short beeps) is heard: - the system does not allow the extension to edit the table (Pr ogram 61 [C.]). - the call does not have Caller I ...

  • NEC 824 - page 23

    1. Press key . 2. Dial . 3. Dial bin number (001-100). 4. Press . 5. Press . 6. Press . 7. Press . 1. Press . 2. Dial . 3. Dial bin number (001-100). 4. Press . ● Dialing out fr om a stored number may not work with all central offices. The number stor ed in the bin may have to be edited (e.g. W ith 203-926-5400, the “203” may have to be r emo ...

  • NEC 824 - page 24

    1. Press . 2. Dial . 3. Dial the digits of the phone number to be searched (up to 10 digits max.). 4. Press . The first name and number is displayed. ● Pr ess (forward) or (back- war ds) to scroll. 5. T o call the displayed number, press . OR T o edit the information, press + follow the editing instructions explained previously . OR T o delete th ...

  • NEC 824 - page 25

    ● If needed, scr oll by pressing (forwar d) or (backwar ds). 5. T o call the displayed number, press . OR T o edit the information, press + follow the editing instructions explained previously . OR T o delete the information: Press + . 1. Press . 2. Dial . 3. Scroll to find the number desired. ● scr olls forward, scr olls backwar d. 4. Press wh ...

  • NEC 824 - page 26

    1. Press . 2. Dial . 3. Press . 4. Press . ● The information will be stor ed in the next available bin. Callback When you call a busy extension, you can leave a Callback request for a return call. Y ou do not have to repeatedly call the busy extension back, hoping to find it idle. When you leave a Callback, the system handles your request as foll ...

  • NEC 824 - page 27

    The signal is a quick double ring. 1. ● Extension is called. 1. Lift handset to cancel Callback before receiving the Callback signal. 2. Conference Conference lets you add additional inside and outside callers to your conversation. W ith Conference, you can set up a multiple-party tele- phone meeting without leaving the office. The system allows ...

  • NEC 824 - page 28

    Method 2 1. Establish an outside call. 2. Press . 3. Press and call the other extension by paging and announce the CO line key number . ● The called party must pr ess the CO line key to join. 4. Press . 1. 2. Press . Confirmation T one The Confirmation T one feature allows a tone to be emitted from the built-in speaker on the keyset each time you ...

  • NEC 824 - page 29

    Direct Station Selection Console, DSS (Portrait 824 only) If you do a lot of call processing (like an operator or dispatcher), you may have a Direct Station Selection (DSS) Console. The DSS Console gives you a Busy Lamp Field (BLF) and one-button access to exten- sions and certain system features. Use the DSS Console to help you: ● Call Extension ...

  • NEC 824 - page 30

    1. While on a CO call, press a DSS key . ● The CO call is put on Hold and a call is placed to the desir ed extension. 2. Press . ● Called extension rings. 1. While on a CO call, press one of the DSS keys. ● CO call is put on hold and a call is placed to the desir ed extension. 2. Make announcement. 3. Press . ● CO call is transferr ed. ● ...

  • NEC 824 - page 31

    1. 2. Press . 3. Dial . 4. Press One-T ouch key . 5. Dial extension number . OR T o program a Page Zone, dial 80-87 (86 and 87 can only be assigned as DSS keys on the Portrait 824 system). OR T o program a Door Box, dial 88 or 89. 6. 1. ● If Single Step Access is pr ogrammed and the phone is equipped with a speakerphone, this step can be skipped. ...

  • NEC 824 - page 32

    Directed Call Pickup Use Directed Call Pickup when you need to answer a call ringing another extension without leaving your phone. This lets you easily cover a co-worker's calls when they have to be away from their desk. 1. ● Do not pr ess . 2. Dial extension number of ringing phone. OR Dial . ● If mor e than one extension is ringing, this ...

  • NEC 824 - page 33

    Directory Dialing If you have a display phone, Directory Dialing lets you call a Speed Dial or Intercom number by choosing the name associated with the number . Y ou do not have to dial the number - you just select the dis- played name instead. This feature can be programmed as a One-T ouch key in the Programmable Keys feature. T o store a name for ...

  • NEC 824 - page 34

    Do Not Disturb Do Not Disturb (DND) blocks Page announcements, ringing and incoming voice announcements to your extension. DND permits you to work undisturbed at your desk without interruptions from your phone. When you activate DND, incoming calls still flash your line keys. While in DND, you may still use your phone in the normal man- ner for pla ...

  • NEC 824 - page 35

    1. Press twice to block just CO audible. flashes. ● T o activate DND while on a call, pr ess FTR then DND/CONF . 1. Do not lift handset. 2. Press once or twice (whichever makes extinguish). ● T o cancel DND while on a call, pr ess FTR then DND/CONF . Door Box Y our system may have Door Boxes. A Door Box is a self-contained Intercom unit typical ...

  • NEC 824 - page 36

    1. 2. Dial . ● Connection established. 1. 2. Press , then for box 1 or for box 2. 1. Press to activate the relay . ● The r elay remains closed for 5 seconds (This could be longer or for as long as the FLASH key is held down, depend- ing on pr ogramming). Executive Override Executive Override lets you override the system's privacy feature - ...

  • NEC 824 - page 37

    Extension Hunting Extension Hunting routes internal and DISA calls to a predefined group of hunt group member extensions. A call will ring the first available extension in the hunt group. Extension Hunting is helpful, for example, for a group of co-workers that share responsibility for answering calls. Each new call rings the first available extens ...

  • NEC 824 - page 38

    Handsfree (Speakerphone) When it's inconvenient to hold the handset, you can use the speaker and microphone in your telephone and talk Handsfree instead. Handsfree is great when you don't have a free hand for the phone. (For example, you may want to enter data at a computer terminal while talking to a customer on the phone.) There are thr ...

  • NEC 824 - page 39

    1. Press . ● If Single Step Access is pr ogrammed, this step can be skipped. 2. Obtain outside or Intercom dial tone in the usual way . ● Listen for: Dial tone 3. Dial number . ● Speak towar d phone when call is established. 1. Press . ● If Ringing Line Pr eference is pr o- grammed, this step answers the call. 2. Press flashing . 3. Speak t ...

  • NEC 824 - page 40

    Headset Compatibility T o get even more freedom and convenience than with Handsfree, pur- chase a Headset and connect it to your telephone. In addition to hav- ing your hands free for other work, you'll have privacy on a call that is not available with Handsfree. 1. Make sure your phone is idle and pro- grammed for headset operation. 2. Unplug ...

  • NEC 824 - page 41

    Hold (also known as System Hold) For normal calls . . . When you place an outside call on Hold, it flashes your line key and the line keys on your co-workers’ phones as well. Either you or another co-worker can pick up the call on Hold. However , Intercom calls on Hold do not indicate at any other extensions and no other system features can be ac ...

  • NEC 824 - page 42

    1. 2. Press flashing . 1. 2. Press flashing . OR Press . Dial and the extension num- ber that placed the call on Hold. ● Call is connected. 1. Press . 1. Press . 2. Press . 3. Press . 4. Press . Hotline - Dual Handsfree Hotline Dual Handsfree Hotline allows you to simultaneously call two other extensions. A 'secretary' extension can mak ...

  • NEC 824 - page 43

    Intercom call over the speaker of two 'executive' extensions. The users at the executive extensions can reply Handsfree (i.e., by just speaking toward the phone) and you can all talk. The simultaneous call goes through only if both executive extensions are idle and an executive extension has not forwarded Intercom calls. When an executive ...

  • NEC 824 - page 44

    1. 2. Press . ● Listen for: Dial tone 3. Dial extension number . ● T o convert a ringing call into a voice announced call or vice versa, dial '1'. Listen for: T wo beeps 1. Speak toward phone Listen for: ICM ring 1. Last Number Redial Instead of dialing a busy or unanswered outside call again, quickly redial it with Last Number Redial ...

  • NEC 824 - page 45

    Meet-Me Conference Use Meet-Me Conference to have a telephone meeting with up to five other co-worker's. After you announce the Meet-Me Conference over the Paging, a co-worker joins the meeting by dialing the Meet-Me Conference code. Need to talk to only one other co-worker and don't know where they are? Meet-Me Paging allows you to set u ...

  • NEC 824 - page 46

    1. (Do not press ). 2. Press . ● Listen for: Conversation with Confer ence members. 1. 2. Press . ● Listen for: Dial tone 3. Dial code. ● 80 for All Call ● 81-84 for zones ● 85 for All Call, external zones only ● 86-87 for external zones (Portrait 824 system only) 4. Page person, announce code (Portrait 308 = 80-85, Portrait 824 = 80-87 ...

  • NEC 824 - page 47

    Message W aiting Don't keep recalling a busy or unanswered co-worker . Leave them a Message W aiting request for a return call instead. The request is a quick flashing MW LED at the multibutton extension you called and a double wink LED on your phone. When your co-worker answers the Message W aiting, they automatically call your extension. And ...

  • NEC 824 - page 48

    1. 2. Dial . 3. 1. 2. Dial , extension number , . 3. 1. 2. Press . ● The first message appears. Use '*' to advance and use '#' to go backwar d. 3. Press to cancel a message. OR Press to return to the phone to an idle condition. T o cancel an individ- ual Message W aiting from originating or received phone (display phone only): ...

  • NEC 824 - page 49

    Do not lift handset. 1. Press . 2. Dial . ● Extension number displays. 3. T o display the next extension number that left a Message W aiting indication, dial again. 4. Press to return to normal display . 1. 2. Press . 3. Dial . ● The extension is called. 4. If you receive no answer , you can call the next extension that left a Message W aiting ...

  • NEC 824 - page 50

    1. Press . ● The MIC LED lights steady . Y ou can do this while on a call or when your phone is idle. 1. Press . ● The MIC LED goes out. Name/Message Storing Y ou can create identification names for each outside line, extension and Speed Dial number in the system. This helps you and your co- workers when you place and answer calls. When you cal ...

  • NEC 824 - page 51

    the first One-T ouch key and dial pad key '2' to get the letter 'A') ● 2) Pr ess the dial pad key showing the letter or symbol you desir e. For phones with `Q-Z' on digit 1: One-T ouch key 4 = space One-T ouch key 5 = delete a character One-T ouch key 6 = delete all characters For phones with no letters on digit 1 : One-T ...

  • NEC 824 - page 52

    1. Press twice. 2. Press . 3. Dial extension number to be stored. 4. Dial . 5. Input the letters of the name to be stored. ● See 'T o enter a name' above. 6. Press . 7. Dial next extension number to store. OR Press to finish. 1. Press twice. 2. Press . 3. Dial the Speed Dial number to be named (2-digit Speed Dial: 00-99 or 3-digit Speed ...

  • NEC 824 - page 53

    Night Answer (Off-Hours Ringing) Y ou may be able to activate Night Answer for your system. Used after normal working hours, Night Answer redirects your system's incoming calls to where they should ring at night. For example, when most of your co-workers have left for home, your system may redirect calls to the security desk. There are two typ ...

  • NEC 824 - page 54

    Off-Hook Signaling T rying to get in touch with a co-worker who is busy on a call? Use Off-Hook Signaling to let your co-worker know you're trying to get through. There are two types of Off-Hook Signaling: CO Of f-Hook Signaling and Intercom Off-Hook Signaling. W ith CO Off-Hook Signaling , an incoming CO call will send muted ringing to your p ...

  • NEC 824 - page 55

    1. Press to put an outside call in progress on Hold or hang up the call in progress. ● Y ou must hang up an Inter com call since no other featur e can be used without disconnecting the Inter com call. 2. Press the flashing . 1. Place an Intercom call. ● Listen for: Busy tone 2. Dial . ● Listen for: One short burst of tones. 3. W ait for a rep ...

  • NEC 824 - page 56

    Outside Calls, Answering Answering incoming calls can be as simple as pressing a line key or dialing an access code. There are many types of outside calls that you can answer from your phone. Ask your Communications Manager about the different types of calls you are expected to answer . Y ou may have line and loop keys on your phone. A line key is ...

  • NEC 824 - page 57

    The method you use depends on how your system and your phone are set up. For example, if your office is set up like a 'key system', you and your co-workers will have line keys for the same outside lines. Y our Communications Manager can tell you which method you should use for placing outside calls. 1. Press an available line or loop key ...

  • NEC 824 - page 58

    1. 2. Press . 3. Dial Queue Group number (1-6). ● If you hear busy tone, the extension can not use Line Queuing for that gr oup. 4. Automatic Line Access Automatic Line Access lets you access an outgoing line without press- ing a line key or dialing a two-digit line number . A single-digit code automatically accesses an outgoing outside line. 1. ...

  • NEC 824 - page 59

    1. Dial phone number (pulse mode). 2. Dial . 3. Dial number (tone mode). Are Y ou Behind a PBX? Y our telephone system may be connected to a Private Branch Exchange (PBX) rather than to the telephone company's lines. This means that when you get dial tone on an outside line, you are really getting dial tone from the PBX. This may af fect the w ...

  • NEC 824 - page 60

    If Y ou Hear a Warning T one While on an outside call, you may hear occasional beeps through your speaker or handset. These tones remind you that you have been on the call a long time. Did Y our Call Go Through? If you dial certain calls and you find that they do not go through, ask your Communications Manager the following questions: ● Do I need ...

  • NEC 824 - page 61

    1. Press . 2. Dial . 3. Dial 4 digit personal code. ● Y ou can dial any number as a personal code. 4. Dial . ● Listen for: Confirmation tone when featur e activated. OR Err or tone when feature is not activated. 5. Press . 1. Press . 2. Dial and enter the 4-digit code that was used when feature was activated. 3. Dial . ● Listen for: Confirmat ...

  • NEC 824 - page 62

    1. Press . 2. Dial . 3. Dial password (73738 = RESET) ● Note: This is not the system passwor d. This is a special passwor d used for this featur e only . 4. Press . 5. Enter the station number to be cleared. 6. Press . ● T o enter additional stations, pr ess '#'. 7. Press to exit. Paging Internal Page Need to locate a co-worker or mak ...

  • NEC 824 - page 63

    incoming calls, Background Music (BGM) (Portrait 824 only) from an external source, and/or alarm signals to broadcast over the external page zone(s). 1. 2. Press . ● Listen for: Dial tone 3. Dial code. ● 80 for All Call (This can be pr o- grammed to page all internal and external zones. Check with your Communications Manager for curr ent pr ogr ...

  • NEC 824 - page 64

    features you use most often under the One-T ouch, CO or DSS keys. The chart below shows the available features and their corresponding feature numbers. Note that outside lines can only be stored in the top row and the first two keys on the left in the second row (keys 1-8). Feature # Feature 00 Undefine a feature key 01 Alarm Clock 02 Call T imer 0 ...

  • NEC 824 - page 65

    1. Press . 2. Press . 3. Press a desired One-T ouch key or . 4. Dial feature number (01-22). 5. Dial . 6. Press . 1. Press . 2. Press . 3. Press a One-T ouch key or with the stored feature you wish to delete. 4. Dial to delete the stored feature. 5. Dial . 6. Press . 1. Press . 2. Press a One-T ouch key or where the feature is stored. ● The descr ...

  • NEC 824 - page 66

    Repeat Dial T rying to get in touch with a customer and their phone is always busy or unanswered? Don't keep redialing it manually - have Repeat Dial do it for you. Repeat Dial will retry your call automatically until the called party answers or the feature is cancelled. The number of times the sys- tem retries a call is programmable. Y our Co ...

  • NEC 824 - page 67

    sounds in the warehouse when it's left unattended. Y ou just set up a Room Monitor with a phone in the warehouse area. Y ou must activate Room Monitor at your phone and at the phone you want to monitor . Y ou can only monitor one phone at a time, but any number of phones can monitor the same extension. In addition, Room Monitor is for listenin ...

  • NEC 824 - page 68

    Y ou can also quickly redial your last call using Last Number Redial (page 40) and Repeat Redial (page 62). -Do not hang up. 1. Press twice. OR Press One-T ouch key . ● Save can r etain a number up to 18 dig- its long, using 0-9, # or *. 2. 1. 2. Press . 3. Press . OR Press One-T ouch key . ● The stor ed number dials out. Initial system pr ogra ...

  • NEC 824 - page 69

    Selectable Display Messaging Activate a Selectable Display message when you leave your desk. A co-worker calling your extension will see the message you activated on their telephone's display . For example, when you leave for vaca- tion, select the message, 'ON V ACA TION'. Y our callers will know why you don't answer . Other th ...

  • NEC 824 - page 70

    Do Not Disturb / General Message When Do Not Disturb is activated or if you're just away from your desk, you can program a message for all display phones calling your extension. Message W aiting When an extension user Intercoms a display phone and receives a busy signal or no answer , you can leave a Message W aiting indication with a selected ...

  • NEC 824 - page 71

    1.Press . 2. Enter the message number desired. 3. Press . 1. Press . 2. Press . T o cancel a Display Message: T o select a Display Message: Preset Messages (cont.) No. Message 07 Left for the Day 08 On Break 09 On V acation 10 Out of Office 1 1 Out to Lunch 12 Out Until ___:___ * 13 Out Until ___/___ * 14 Page Me 15 Please See Me 16 See Me ASAP 17 ...

  • NEC 824 - page 72

    1. Press . 2. Press One-T ouch key #1 or #2. 3. Dial . 4. Enter your own message by using the Name/Message Storing feature (page 46). 5. Press . 6. Dial . 7. Press next One-T ouch key to be entered. OR Press to finish. 1. Press and . 2. Dial message number (00-49). 3. Dial . 4. Edit message by using the Name/Message Storing feature (page 46). 5. Pr ...

  • NEC 824 - page 73

    Broadcast Message 1. Press and . 2. Dial message number (00-49), dial . OR Press One-T ouch key #1 or #2 for a personal message, then dial . 3. Edit message if required. 4. Press . 5. Dial an extension number or hunt group number (00-04). 6. Press to set more extensions if required. ● This step is only available when exten- sion number is dialed ...

  • NEC 824 - page 74

    1. Press . Do Not Disturb Message / General Message 1. Press . 2. Dial message number (00-49), dial . OR Press One-T ouch key #1 or #2 for per- sonal message, then dial . ● DND/CONF flashes intermittently as confirmation. 1. Press and . 2. Use Name/Message Storing feature to enter a message (page 46). 3. Press and . ● DND/CONF flashes intermitt ...

  • NEC 824 - page 75

    1. Press and . ● When DND message is activated, DND/CONF flashes intermittently . Message W aiting Message 1. Place an Intercom call. ● Listen for: Busy or no answer 2. Dial . ● MW flashes intermittently as confirma- tion. ● Display shows 'LEA VE MESSAGE?'. 3. T o leave no T ext Message, hang up. OR Dial to leave T ext Message. 4. ...

  • NEC 824 - page 76

    1. Press (Portrait 308) OR (Portrait 824). ● First message appears on the display . 2. Use to advance and use to backup. 3. Press to cancel message. OR Press to return to idle condition. 1. Press . ● First message appears on the display . 2. Use to advance and use to backup. 3. Press to call back. OR Press to delete message. OR Press to return ...

  • NEC 824 - page 77

    Camp-On Message 1. Place an Intercom call. ● Listen for: Busy tone 2. Activate Off-Hook Signaling by pressing . 3. Press . 4. Dial message number (00-49), dial . OR Press One-T ouch key #1 or #2 for per- sonal message, then dial . OR Press , edit a message using the Name Storing feature, then press again and dial . ● Confirmation tone is hear d ...

  • NEC 824 - page 78

    Speed Dial Speed Dial gives you quick access to numbers you call frequently . This saves time, for example, when calling a client with whom you deal often. Instead of dialing a long telephone number , you just use Speed Dial. There are two types of Speed Dial: Personal Speed Dial and System Speed Dial . Personal Speed Dial numbers are programmed in ...

  • NEC 824 - page 79

    1. or press . 2. Press an idle . 3. Press . 4. Dial Speed Dial number (00[0]-199). Personal Speed Dial 1. Press . 2. Press and . 3. Press a One-T ouch key . 4. Dial phone number to be stored. 5. Repeat steps 2 through 4 to program additional numbers. 6. Press to exit. 1. Press . 2. Press and . 3. Enter the System Speed Dial Number or press the One- ...

  • NEC 824 - page 80

    1. Seize a . 2. Press a One-T ouch key which stores the selected number . Step Calling When you make an Intercom call and receive a busy signal or no answer , Step Calling lets you call the other extensions, in ascending order , by just dialing '#'. For example, if extension 12 is busy , Step Calling tries extension 13. If there is no ans ...

  • NEC 824 - page 81

    Note: Central Of fice Loop Supervision must be provided to prevent lines from remaining conferenced/busy when the parties hang up. Note: When both outside parties finish the call, unsupervised confer ence must be man- ually terminated by the telephone which set up the call. 1. Establish first outside call. 2. Press . ● The call is put on Hold. 3. ...

  • NEC 824 - page 82

    T ime and Date Setting Y ou see the T ime and Date on your telephone's display when it is idle and while using some functions of the phone. The Time and Date are programmed at the station connected to port 10 (usually extension 10). Although entered in 24-hour format, the system time always displays in 12-hour format (AM/PM). 1. Press . 2. Dia ...

  • NEC 824 - page 83

    T ransfer T ransfer lets you quickly send the call you are on to a co-worker . Y ou can T ransfer any outside call. If a call you transfer is not answered, it automatically recalls to your extension. Y ou may T ransfer a call Screened or Unscreened. W ith Screened T ransfer , you announce the call to the destination user before hanging up. W ith Un ...

  • NEC 824 - page 84

    1. Stay on the handset. ● The T ransfer goes through when the calling party pr esses TRFR. V oice Mail ☛ This feature requires an optional NVM-Series V oice Mail system. T ired and frustrated by missed calls, inaccurately written messages and telephone tag? End these hassles with Integrated V oice Mail. Ask your Communications Manager if you ha ...

  • NEC 824 - page 85

    Calling Y our Mailbox 1. 2. Press . 3. Press . 4. Press the one-touch key to be programmed. 5. Dial . 6. 1. Press the V oice Mail key . 2. (Optional) After answer, dial security code. ● Ask your Communications Manager for your security code. Leaving a Message The extension you call can be busy , in DND or unanswer ed. 1. . ● The V oice Mail sys ...

  • NEC 824 - page 86

    Forwarding Calls to Y our Mailbox 1. 2. . 3. Dial station number of the voice mail. 4. Dial Call Forwarding condition: ● 0 = All Calls ● 1 = Not answer ed ● 2 = Busy ● 3 = Busy or not answer ed 5. 1. . 2. twice. 3. . T ransferring Calls to a Mailbox 1. . 2. Dial station number . ● This number can be your mailbox num- ber or a co-worker&ap ...

  • NEC 824 - page 87

    Recording Y our Call 1. 2. . 3. Dial and press a line key . 4. Dial . 5. Press . 6. 1. Press the programmed Record key . OR 1. If it's an Intercom call, press and dial . If it's a CO call, press and dial . ● Y ou hear two beeps and your Recor d key flashes. The beeps periodically r emind you that you are r ecording. V olume Control Y ou ...

  • NEC 824 - page 88

    1. Press or while the phone is ringing or idle. 1. Press or while on a handset call. 1. Press or in handsfree mode. Do not lift handset. 1. Press or while the phone is idle. T o adjust the LCD contrast for display phones: T o adjust the Speaker V olume: T o adjust the Handset Receiver V olume: T o adjust the Ringing V olume: V olume Control 84 8240 ...

  • NEC 824 - page 89

    Charts This section contains handy charts for your reference. Y ou'll find: ● The dialing plan (the numbers you dial) -- see below ● Flash rates for your telephone keys - see page 86 Y our System's Dialing Plan W ith certain system programming changes, the feature access codes may be different than described. Enter your revised codes ...

  • NEC 824 - page 90

    System Flash Rates for LEDs Y our phone is idle (not on a call) All LEDs out (dark) Outside Calls An outside line is busy The line key is ON (Red) An outside call is ringing your phone The line key flashes Slowly (Red) And then you answer it The line key is ON (Gr een) Y ou place the outside call on Hold The line key flashes Quickly (Green) Or a co ...

  • NEC 824 - page 91

    A Account Codes . . . . . . . . . . . . . .9 Alarm Clock . . . . . . . . . . . . . . . .9 Answering Outside Calls . . . . . .52 Automatic Line Access . . . . . . . .54 B Background Music . . . . . . . . . . .1 1 C Call Forwarding . . . . . . . . . . . . .13 T o V oice Mail . . . . . . . . . . .82 Call Parking . . . . . . . . . . . . . . . .14 Call ...

  • NEC 824 - page 92

    Hold . . . . . . . . . . . . . . . . . . . . . .36 Hotline-Dual Handsfree Hotline .38 I ICM SEE Intercom If Y ou Need Privacy . . . . . . . . . .5 Intercom . . . . . . . . . . . . . . . . . . .39 Internal Page . . . . . . . . . . . . . . . .58 L Last Number Redial . . . . . . . . . .40 Leaving a V oice Mail Message . .81 Line Queuing . . . . . . . ...

  • NEC 824 - page 93

    S Save . . . . . . . . . . . . . . . . . . . . . .63 Selectable Display Messaging . . .65 Speakerphone . . . . . . . . . . . . . . .34 Speed Dial . . . . . . . . . . . . . . . . .74 Step Calling . . . . . . . . . . . . . . . .76 Streamlining Y our T elephone's Operation . . . . . . . . . . . . . .6 T T andem Calls . . . . . . . . . . . . . . . ...

  • NEC 824 - page 94

    Index Index- 4 82400mfh05.qxd 3/30/01 9:30 AM Page 4 ...

  • NEC 824 - page 95

    NEC America, Inc., Corporate Networks Group 4 Forest Parkway , Shelton, CT 06484 T el: 800-365-1928 Fax: 203-926-5458 cng.nec.com Other Important T elephone Numbers Sales: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .203-926-5450 Customer Service: . . . . . . . . . . . . . . . . . . . . . . . . . . .203-926-5444 Customer S ...

  • NEC 824 - page 96

    NEC America Inc., Corporate Networks Group 4 Forest Parkway, Shelton, CT 06484 TEL: 203-926-5400 FAX: 203-929-0535 cng.nec.com 82400mfh05CVR.QXD 3/30/01 9:26 AM Page 1 ...

Manufacturer NEC Category Amplified Phone

Documents that we receive from a manufacturer of a NEC 824 can be divided into several groups. They are, among others:
- NEC technical drawings
- 824 manuals
- NEC product data sheets
- information booklets
- or energy labels NEC 824
All of them are important, but the most important information from the point of view of use of the device are in the user manual NEC 824.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals NEC 824, service manual, brief instructions and user manuals NEC 824. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product NEC 824.

Similar manuals

A complete manual for the device NEC 824, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use NEC 824 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of NEC 824.

A complete NEC manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual NEC 824 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the NEC 824, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the NEC 824, that we can find in the current document
3. Tips how to use the basic functions of the device NEC 824 - which should help us in our first steps of using NEC 824
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with NEC 824
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of NEC 824 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning NEC 824?

Use the form below

If you did not solve your problem by using a manual NEC 824, ask a question using the form below. If a user had a similar problem with NEC 824 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)