Manual Hitachi DH 30PB

76 pages 1.46 mb
Download

Go to site of 76

Summary
  • Hitachi DH 30PB - page 1

    MODEL ROTARY HAMMER MODÈLE MARTEAU ROTATIF MODELO MARTILLO GIRATORIO DH 30PB • DH 30PC DOUBLE INSULATION DOUBLE ISOLATION AISLAMIENTO DOBLE INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI AVERTISSEMENT Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la mort ou de sérieuses blessures corporelles! Ce mode d’emploi co ...

  • Hitachi DH 30PB - page 2

    2 English CONTENTS English Page IMPORTANT INFORMATION ............. 3 MEANINGS OF SIGNAL WORDS ...... 3 SAFETY ................................................... 4 GENERAL SAFETY RULES ................. 4 SPECIFIC SAFETY RULES AND SYMBOLS ..... 6 DOUBLE INSULATION FOR SAFER OPERATION ................................... 8 FUNCTIONAL DESCRIPTION ... ...

  • Hitachi DH 30PB - page 3

    3 English IMPORTANT SAFETY INFORMATION Read and understand all of the safety precautions, warnings and operating instructions in the Instruction Manual before operating or maintaining this power tool. Most accidents that result from power tool operation and maintenance are caused by the failure to observe basic safety rules or precautions. An accid ...

  • Hitachi DH 30PB - page 4

    4 English SAFETY GENERAL SAFETY RULES WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS 1. Work Area (1) Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. (2) Do not operat ...

  • Hitachi DH 30PB - page 5

    5 English (2) Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. (3) Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in ...

  • Hitachi DH 30PB - page 6

    6 English SPECIFIC SAFETY RULES AND SYMBOLS 1. Hold tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator. 2. ALWAYS wear ear protectors when using the tool for exte ...

  • Hitachi DH 30PB - page 7

    7 English 13.Blades and accessories must be securely mounted to the tool. Prevent potential injuries to youself or others. Blades, cutting implements and accessories which have been mounted to the tool should be secure and tight. 14. Keep motor air vent clean. The tool’s motor air vent must be kept clean so that air can freely flow at all times. ...

  • Hitachi DH 30PB - page 8

    8 English DOUBLE INSULATION FOR SAFER OPERATION To ensure safer operation of this power tool, HITACHI has adopted a double insulation design. “Double insulation “ means that two physically separated insulation systems have been used to insulate the electrically conductive materials connected to the power supply from the outer frame handled by t ...

  • Hitachi DH 30PB - page 9

    9 English Stopper Housing Trigger Set Screw (Under the Tail Cover) Tail Cover Brush Cap (Inside the Tail Cover) Drill Bit Nameplate Side Handle Grip Change Lever Handle FUNCTIONAL DESCRIPTION NOTE: The information contained in this Instruction Manual is designed to assist you in the safe operation and maintenance of the power tool. NEVER operate, o ...

  • Hitachi DH 30PB - page 10

    10 English A SSEMBL Y AND OPERA TION APPLICATIONS Rotation and striking function 䡬 Drilling anchor holes 䡬 Drilling holes in concrete 䡬 Drilling holes in tile Rotation only function 䡬 Drilling in steel or wood (with optional accessories). 䡬 Tightening machine screws, wood screws (with optional accessories). Striking only function 䡬 Ligh ...

  • Hitachi DH 30PB - page 11

    11 English Fig. 2 Dust Cup Dust Collector (B) Fig. 3 Part of SDS-plus shank Front cap Grip Drill bit Fig. 4 5. Confirming condition of the environment: Confirm that the work site is placed under appropriate conditions conforming to prescribed precautions. 6. Mounting the drill bit (Fig. 2) (1) To attach a drill bit (SDS-plus shank), fully pull the ...

  • Hitachi DH 30PB - page 12

    12 English (When using dust collector (B) attached to a drill bit that has more than 7-15/ 32" (190 mm) of overall length, dust collector (B) cannot touch the concrete surface but rotates. Therefore please use dust collector (B) by attaching to drill bits which have 6-17/32" (166 mm), 6-19/64" (160 mm) and 4-21/64" (110 mm) over ...

  • Hitachi DH 30PB - page 13

    13 English Part of SDS-plus shank Front Cap Grip Drill Chuck Chuck Adaptor Fig. 7 Change Lever Push Button Change Lever Push Button Fig. 5 Fig. 6 Fig. 8 1. Switch operation The rotation speed of the drill bit can be controlled steplessly by varying the amount that the trigger switch is pulled. Speed is low when the trigger switch is pulled slightly ...

  • Hitachi DH 30PB - page 14

    14 English CAUTION: 䡬 Application of force more than necessary will not only reducing drilling efficiency at all, but will deteriorate the tip edge of the drill bit and reduce the service life of the rotary hammer in addition. 䡬 Drill bit may snap off while disengaging the rotary hammer from the jammed hole. For disengaging, it is important to ...

  • Hitachi DH 30PB - page 15

    15 English CAUTION: 䡬 Exercise care in preparing a pilot hole suitable for the wood screw taking the hardness of the wood into consideration. Should the hole be excessively small or shallow, requiring much power to drive the screw into it, the thread of the wood screw may sometimes be damaged. 6. Striking only (DH30PC) This rotary hammer can be s ...

  • Hitachi DH 30PB - page 16

    16 English 9. Using the side handle When you wish to change a position of the side handle, turn grip of the side handle counterclockwise to loosen it, and then fasten it firmly. CAUTION: When boring a hole, there can be a case where the machine attempts to rotate by the reaction at the time of penetrating a concrete wall and/or when a tip of the bl ...

  • Hitachi DH 30PB - page 17

    17 English (4) Engage the guide plate with the core bit, and turn the guide plate to left or right so that it does not fall even if it faced downward. (Fig. 17) 2. How to bore (Fig. 18) (1) Connect the plug to the power source. (2) A spring is installed in the center pin. Push it lightly to the wall or the floor perpendicularly. Connect all over th ...

  • Hitachi DH 30PB - page 18

    18 English Wear limit No. of carbon brush 0.28" (7 mm) 0.67" (17 mm) 73 Fig. 20 MAINTENANCE AND INSPECTION WARNING: Be sure to switch power OFF and disconnect the plug from the receptacle during maintenance and inspection. 1. Inspecting the drill bits Since use of a dull tool will cause motor malfunctioning and degraded efficiency, replac ...

  • Hitachi DH 30PB - page 19

    19 English 䡬 Replacing carbon brushes: (For parts name, refer to Fig. 1) Loosen the two set screws and remove the tail cover. Remove the brush caps and carbon brushes. After replacing the carbon brushes, tighten the brush caps securely and to install the tail cover with securely tightening two set screws. 5. How to replase grease This machine is ...

  • Hitachi DH 30PB - page 20

    20 ...

  • Hitachi DH 30PB - page 21

    21 ...

  • Hitachi DH 30PB - page 22

    22 ...

  • Hitachi DH 30PB - page 23

    23 ...

  • Hitachi DH 30PB - page 24

    24 ...

  • Hitachi DH 30PB - page 25

    25 ...

  • Hitachi DH 30PB - page 26

    26 Français INFORMATIONS IMPORTANTES DE SÉCURITÉ Lire et comprendre toutes les précautions de sécurité, les avertissements et les instructions de fonctionnement dans ce mode d’emploi avant d’utiliser ou d’entretenir cet outil motorisé. La plupart des accidents causés lors de l’utilisation ou de l’entretien de l’outil motorisé p ...

  • Hitachi DH 30PB - page 27

    27 Français SECURITE REGLES GENERALE DE SECURITE AVERTISSEMENT: Lire et coxmprendre toutes les instructions. Un non respect de toutes les instructions ci-dessous peut entraîner une électrocution, un incendie et/ou de sérieuses blessures personnelles. CONSERVER CES INSTRUCTIONS 1. Zone de travail (1) Garder la zone de travail propre et bien écl ...

  • Hitachi DH 30PB - page 28

    28 Français 3. Sécurité personnelle (1) Rester sur ses gardes, regarder ce que l’on fait et utiliser son sens commun lors de l’utilisation d’un outil motorisé. Ne pas utiliser un outil en état de fatigue ou sous l’influence de drogues, d’alcool ou de médicaments. Un moment d’inattention lors de l’utilisation de l’outil motoris ...

  • Hitachi DH 30PB - page 29

    29 Français (7) Vérifier les défauts d’alignement ou grippage des parties mobiles, les ruptures des pièces et toutes les autres conditions qui peuvent affecter le fonctionnement des outils. En cas de dommage, faire réparer l’outil avant de l’utiliser. Beaucoup d’accidents sont causés par des outils mal entretenus. (8) Utiliser uniquem ...

  • Hitachi DH 30PB - page 30

    30 Français NE JAMAIS faire fonctionner cet outil sans que tous les dispositifs et caractéristiques de sécurité ne soient en place et en état de fonctionnement. Si un entretien ou une réparation nécessite le retrait d’un dispositif ou d’une caractéristique de sécurité, s’assurer de bien remettre en place le dispositif ou la caracté ...

  • Hitachi DH 30PB - page 31

    31 Français 17. NE JAMAIS laisser fonctionner l’outil sans surveillance. Le mettre hors tension. Ne pas abandonner l’outil avant qu’il ne soit complètement arrêté. 18. Manipuler l’outil motorisé avec précaution. Si un outil motorisé tombe ou frappe un matériau dur accidentellement, il risque d’être déformé, fendu ou endommagé. ...

  • Hitachi DH 30PB - page 32

    32 Français DOUBLE ISOLATION POUR UN FONCTIONNEMENT PLUS SUR Pour assurer un fonctionnement plus sûr de cet outil motorisé, HITACHI a adopté une conception à double insolation. “Double isolation” signifie que deux systèmes d’isolation physiquement séparés ont été utilisés pour isoler les matériaux conducteurs d’électricité con ...

  • Hitachi DH 30PB - page 33

    33 Français SPECIFICATIONS Modèle DH30PB DH30PC Moteur Moteur série monophasé à collecteur Source d’alimentation Secteur, 120V 60 Hz, monophasé Courant 7,4A Capacité béton: 5/32" – 1-3/16" (4mm – 30mm) acier: 1/2" (13mm) bois: 1-1/4" (32mm) Vitesse sans charge 0 – 850/min. Vitesse de percussion à pleine charge 0 ...

  • Hitachi DH 30PB - page 34

    34 Français ASSEMBLAGE ET FONCTIONNEMENT APPLICATIONS Par action combinée de rotation et de frappe 䡬 Perçage de trous d’ancrage 䡬 Perçage de trous dans béton 䡬 Perçage de trous dans une tuile Par action de rotation uniquement 䡬 Perçage de l’acier ou du bois (avec accessoires en option) 䡬 Serreage de vis mécaniques et de vis à ...

  • Hitachi DH 30PB - page 35

    35 Français 5. Vérification des conditions d’environnement Vérifier que l’état de l’aire de travail est conforme aux précautions. 6. Montage du foret de perçage (Fig. 2) (1) Pour fixer un foret de perçage (tige SDS plus), tirer complètement l’attache coulissante dans le sens de la flèche, comme indiqué sur la Fig. 2, puis insérer ...

  • Hitachi DH 30PB - page 36

    36 Français 䡬 Insérer le collecteur à poussière (B) à fond dans le mandrin de l’appareil principal particules pour ne utilisation pluse facile. 䡬 Lors de la mise sous tension du marteau rotatif alors le collecteur à poussière (B) est détaché de la surface en béton, le collecteur à poussière (B) va tourner en même temps que le for ...

  • Hitachi DH 30PB - page 37

    37 Français UTILISATION PRECAUTION: 䡬 Pour éviter tout accident, s’assurer que l’interrupteur est sur la position d’arrêt et que la fiche du cordon d’alimentation est débranchée avant de poser ou de déposer un forêt ou un accessoire similaire. L’interrupteur d’alimentation doit toujours se trouver sur la position d’arrêt pen ...

  • Hitachi DH 30PB - page 38

    38 Français 3. Rotation seulement Cette perceuse à percussion peut être mise sur le mode de rotation uniquement en appuyant sur le bouton-poussoir et en tournant le sélecteur vers le repère . (Fig. 7) Pour percer du bois ou du métal en utilisant le mandrin porte-foret et le raccord de mandrin (accessoire en option), procéder de la manière s ...

  • Hitachi DH 30PB - page 39

    39 Français 4. Lors du vissage des vis machine (Fig. 9) Tout d’abord, insérer la pièce dans la prise à l’extrémité de l’adaptateur (D) de mandrin. Ensuite, monter l’adaptateur (D) de mandrin sur l’appareil principal en utilisant les procédures décrites en 6 (1), (2), (3). Mettre la pointe de la pièce dans les fentes de la tête d ...

  • Hitachi DH 30PB - page 40

    40 Français 6. Percussion uniquement (DH30PC) Le foret de ce marteau rotatif peut être mis en mode de percussion uniquement en appuyant sur le bouton pressoir et en tournant le sélecteur sur le repère . (Fig. 10) (1 ) Montez la pointe de broyage ou le burin. ( 2) Appuyer sur le bouton pressoir et positionner le sélecteur sur ou . La rotation e ...

  • Hitachi DH 30PB - page 41

    41 Français Raccord de queue conique Clavette Support Attache coulissante Capuchon avant Raccord de queue conique Foret de perçage Fig. 14 Fig. 13 Fig. 15 Couronne Filetage Queue de couronne 9. Utilisation de la poignée latérale Si l’on désire modifier la position de la poignée latérale, tourner le manche de la poignée latérale dans le s ...

  • Hitachi DH 30PB - page 42

    42 Français (2) Monter la queue de couronne sur le marteau rotatif à percussion. (Fig. 16) (3 ) Introduire la guijon central dans la plaque de guidage jusqu’à ce qu’il arrête. (4) Engager la plaque de guidage dans la couronne et tourner la plaque de guidage à gauche ou à droite de manière à ce qu’elle à ce qu’elle ne puisse pas tom ...

  • Hitachi DH 30PB - page 43

    43 Français ENTRETIEN ET INSPECTION AVERTISSEMENT: S’assurer de mettre l’interrupteur d’alimentation sur la position OFF et de déconnecter la fiche de la prise secteur avant l’entretien et l’inspection de la meuleuse. 1. Contrôle du foret de perçage Etant donné que l’utilisation d’une mèche usée entraînera un mauvais fonctionn ...

  • Hitachi DH 30PB - page 44

    44 Français REMARQUE: Utiliser le balai en carbone HITACHI No. 73 indiqué sur la Fig. 20. 䡬 Remplacement du balais en carbone Desserrer la vis de fixation et enlever le couvercle de la queue. Enlever la chapeau de balai et la balai en carbone. Après avoir remplacé le balai en carbone, serrer fermement le chapeau du balai et installer le couve ...

  • Hitachi DH 30PB - page 45

    45 Français ...

  • Hitachi DH 30PB - page 46

    46 ...

  • Hitachi DH 30PB - page 47

    47 ...

  • Hitachi DH 30PB - page 48

    48 ...

  • Hitachi DH 30PB - page 49

    49 ...

  • Hitachi DH 30PB - page 50

    50 ...

  • Hitachi DH 30PB - page 51

    51 Español INFORMACIÓN IMPORTANTE SOBRE SEGURIDAD Antes de utilizar o de realizar cualquier trabajo de mantenimiento de esta herramienta eléctrica, lea y comprenda todas las precauciones de seguridad, advertencias e instrucciones de funcionamiento de este Manual de instrucciones. La mayoría de los accidentes producidos en la operación y el man ...

  • Hitachi DH 30PB - page 52

    52 Español SEGURIDAD NORMAS GENERALES DE SEGURIDAD ADVERTENCIA: Lea y entienda todas las instrucciones. Si no sigue las instrucciones indicadas a continuación, pueden producirse descargas eléctricas, incendios, y/o lesiones serias. GUARDE ESTAS INSTRUCCIONES. 1. Área de trabajo (1) Mantenga el área de trabajo limpia y bien iluminada. Los banco ...

  • Hitachi DH 30PB - page 53

    53 Español (5 ) Cuando utilice la herramienta eléctrica en exteriores, utilice un cable prolongador marcado con “W-A” o “W”. Estos cables han sido diseñados para utilizarse en exteriores y reducir el riesgo de descargas eléctricas. 3. Seguridad personal (1) Esté siempre alerta y utilice el sentido común cuando utilice la herramienta e ...

  • Hitachi DH 30PB - page 54

    54 Español (6) Realice el mantenimiento cuidadoso de las herramientas. Mantenga las herramientas afiladas y limpias. Las herramientas adecuadamente mantenidas, con los bordes cortantes afilados, serán más fáciles de utilizar y controlar. (7) Compruebe que las piezas móviles no estén desalineadas ni atascadas, que no haya piezas rotas, y demá ...

  • Hitachi DH 30PB - page 55

    55 Español 6. NO toque NUNCA las piezas móviles. No coloque nunca sus manos, dedos, ni demás partes del cuerpo cerca de las piezas móviles de la herramienta. 7. NO utilice NUNCA la herramienta sin los protectores colocados en su lugar. NO utilice NUNCA esta herramienta sin los protectores de seguridad correctamente instalados. Si el trabajo de ...

  • Hitachi DH 30PB - page 56

    56 Español 16. NO utilice NUNCA una herramienta defectuosa o que funcione anormalmente. Si la herramienta parece que funciona anormalmente, produciendo ruidos extraños, etc., deje inmediatamente de utilizarla y solicite su arreglo a un centro de reparaciones autorizado por Hitachi. 17. NO deje NUNCA la herramienta en funcionamiento desatendida. D ...

  • Hitachi DH 30PB - page 57

    57 Español AISLAMIENTO DOBLE PARA OFRECER UNA OPERACIÓN MÁS SEGURA Para garantizar una operación más segura de esta herramienta eléctrica, HITACHI ha adoptado un diseño de aislamiento doble. “Aislamiento doble” significa que se han utilizado dos sistemas de aislamiento físicamente separados para aislar los materiales eléctricamente con ...

  • Hitachi DH 30PB - page 58

    58 Español DESCRIPCIÓN FUNCIONAL NOTA: La información contenida en este Manual de instrucciones ha sido diseñada para ayudarle a utilizar con seguridad y mantener esta herramienta eléctrica. NUNCA haga funcionar ni efectúe el mantenimiento de la herramienta antes de leer y comprender todas las instrucciones de seguridad contenidas en este man ...

  • Hitachi DH 30PB - page 59

    59 Español MONT AJE Y OPERACIÓN APLICACIONES Acción combinada de rotación y golpeteo 䡬 Perforación de orificios de anclaje 䡬 Perforación de orificios de hormigón 䡬 Perforación de orificios de baldosa Rotación solamente 䡬 Perforación de orificios en hormigón o madera (con accesorios facultativos) 䡬 Apretar tornillos en metal o m ...

  • Hitachi DH 30PB - page 60

    60 Español 5. Confirme las condiciones del medio ambiente. Condirme que el lugar de trabajo esté en las condiciones apropiadas de acuerdo con las precauciones descritas. 6. Montaje de la broca (Fig. 2) ( 1 ) Para colocar una broca (SDS más vástago), tire completamente de la empuñadura en el sentido de la flecha como se muestra en la Fig. 2 en ...

  • Hitachi DH 30PB - page 61

    61 Español 䡬 Cuando ponga en funcionamiento del martillo giratorio meintras el colector de polvo (B) esté separado de la superficie de hormigón, dicho colector girará junto con la broca. Cerciórese de apretar el gatillo interruptor después de haber presionado la copa de polvo sobre la superficie de hormigón. (Cuando emplee la copa de polvo ...

  • Hitachi DH 30PB - page 62

    62 Español 1. Operación del conmutador La velocidad rotatoria de la broca de taladro puede ser controlad variando la fuerza con la que se aprieta el pulsador. La velocidad está baja cuando se aprieta ligeramente el pulsador y se aumenta al apretar más el pulsador. La operación contínua puede ser alcanzada apretando el pulsador y apretando hac ...

  • Hitachi DH 30PB - page 63

    63 Español Para perforar madera o metal empleando el portabrocas y el adaptador del portabrocas (accesorio facultativo), proceder como sigue. Instalación del portabrocas y adaptador del portabrocas: (Fig. 8) (1) Instale la broca en el adaptador del portabrocas. (2) La parte del SDS más vástago es igual que una broca. Por lo tanto, para instalar ...

  • Hitachi DH 30PB - page 64

    64 Español 䡬 No intente emplear la perforadora de percusión en la función de rotación y golpeteo con el adaptador de portabroca (D) y la broca instalados. 5. Atornillando tornillos para madera (Fig. 9) (1) Escoger una broca destornillador apropiada y emplear tornillos con cabeza +, en lo posible, debido a que los tornillos con cabeza – hace ...

  • Hitachi DH 30PB - page 65

    65 Español 8 . Modo de usar la broca (espiga ahusada) y el adaptador de la espiga ahusada ( 1 ) Montar el adaptador de la espiga ahusada en el martillo giratorio (Fig. 13). (2) Montar la broca (espiga ahusada) en el adaptador de la espiga ahusada (Fig. 13) (3) Poner el interruptor en la posición de encendido (ON), y taladrar un agujero de la prof ...

  • Hitachi DH 30PB - page 66

    66 Español 1. Montaje PRECAUCIÓN: 䡬 Cerciorarse de poner el interruptor de la alimentación en la posición de apagado (OFF) y de desconectar el enchufe de la toma de alimentación. ( 1 ) Montar la barrena tubular en su espiga. (Fig. 15) Lubricar la rosca de la espiga de la barrena tubular para facilitar el desmontaje. (2) Montar la espiga de l ...

  • Hitachi DH 30PB - page 67

    67 Español PRECAUCIÓN: 䡬 Cuando se quite el pasador central y la placa guía, poner el interruptor en la posición de apagado (OFF) y desconectar el enchufe de la toma de alimentación. 3. Desmontaje (Fig. 19) Como otro método, quitar la espiga de la barrena tubular del martillo giratorio y golpear fuertemente la cabeza de la espiga de la barr ...

  • Hitachi DH 30PB - page 68

    68 Español MANTENIMIENTO E INSPECCIÓN ADVERTENCIA: Antes de realizar el mantenimiento o la inspección de la amoladora, cerciórese de desconectar la alimentación y de desenchufar el cable de alimentación del tomacorriente. 1. Inspeccionar la broca de taladro Debido a que el uso de brocs desafiladas pueden causar mal funcionamiento del motor y ...

  • Hitachi DH 30PB - page 69

    69 Español NOTA: Utilice las escobillas HITACHI Núm. 73 indicadas en la Fig. 20. 䡬 Cambio de escobillas de carbón Quitar la cubierta de cola y luego aflojar el tornillo de fijación. Aflojando la tapa de escobilla, pueden quitarse las escobillas de carbón, al colocar las escobillas, apretar firmemente la tapa de escobillas y recolocar la cubi ...

  • Hitachi DH 30PB - page 70

    70 ...

  • Hitachi DH 30PB - page 71

    71 ...

  • Hitachi DH 30PB - page 72

    72 ...

  • Hitachi DH 30PB - page 73

    73 ...

  • Hitachi DH 30PB - page 74

    74 ...

  • Hitachi DH 30PB - page 75

    75 ...

  • Hitachi DH 30PB - page 76

    301 Code No. C99108862 N Printed in Japan WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construc- tion activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: ● Lead from lead-based paints, ● Crystalline s ...

Manufacturer Hitachi Category Power Hammer

Documents that we receive from a manufacturer of a Hitachi DH 30PB can be divided into several groups. They are, among others:
- Hitachi technical drawings
- DH 30PB manuals
- Hitachi product data sheets
- information booklets
- or energy labels Hitachi DH 30PB
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hitachi DH 30PB.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hitachi DH 30PB, service manual, brief instructions and user manuals Hitachi DH 30PB. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hitachi DH 30PB.

Similar manuals

A complete manual for the device Hitachi DH 30PB, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hitachi DH 30PB by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hitachi DH 30PB.

A complete Hitachi manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hitachi DH 30PB - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hitachi DH 30PB, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hitachi DH 30PB, that we can find in the current document
3. Tips how to use the basic functions of the device Hitachi DH 30PB - which should help us in our first steps of using Hitachi DH 30PB
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hitachi DH 30PB
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hitachi DH 30PB in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hitachi DH 30PB?

Use the form below

If you did not solve your problem by using a manual Hitachi DH 30PB, ask a question using the form below. If a user had a similar problem with Hitachi DH 30PB it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)