English dropdown-ico

Manual Siemens 2000

110 pages 2.49 mb
Download

Go to site of 110

Summary
  • Siemens 2000 - page 1

    HiPath 2000 HiPath 3000 HiPath 4000 HiPath 5000 optiPoint 410 family optiPoint 420 family optiPoint application module optiPoint displ a y module Adminis trator Manual ...

  • Siemens 2000 - page 2

    Safety Pre cautions 2 S afety P r ecautions For Y our S afety Th e IP telephone optiP oint 41 0/ 420 complies with the European s tan dard EN 60 950 which deals with the safety of in f orm ation t echnolo gy applianc es inc ludin g ele ctroni c of fice equipment . This device h as been designe d wit h safety in min d, thus protecti ng bot h ind i- ...

  • Siemens 2000 - page 3

    Safety Pre cautions 3 Locati on of t he T elep hone • T he telep hone sho uld be op erated in a cont rolled envir onmen t with an a mbient t em- perature between 5 °C and 40 °C (40 °F an d 1 0 4 °F) . • T o ensure go od han dsfr ee tal king qualit y (no t avai lable with opt iPoi nt 410 entry) , the are a in fr ont of the microp hone (fr on ...

  • Siemens 2000 - page 4

    Conten ts 4 Conten ts Safety Pr ecautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 For Your Sa fety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Protection o f the Telephon e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Location of the Telep hone . . . . . . . . . ...

  • Siemens 2000 - page 5

    Contents 5 optiPoin t applicatio n module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Firmware Upd ate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 LDAP Config uration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Web-based Ma nagement Too l . . . . . . . . . . . ...

  • Siemens 2000 - page 6

    Conten ts 6 Data Visualisation (optiPoint 410 entry only) . . . 100 Status Me ssages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Binary encode d ASCII table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 opti ...

  • Siemens 2000 - page 7

    About the Ma nual Gener al Informa tion 7 Gener al Information About the M anua l The instruction s wit hin t his manua l wil l he lp you in ad mini steri ng an d mai n- taini ng the optiP oint 41 0/420. T he instr uct ions cont ain impo rt ant in f orma- tion f or saf e an d prop er oper ation of the op tiP oint 4 1 0/420. F ollo w them care fully ...

  • Siemens 2000 - page 8

    Gener al Infor mation Safet y Precau tions for IP Tele phony 8 Safety P recau t ions for IP T elephon y Dif fe rent methods can be implemented to protect an IP environment fro m external a ttacks (denial of serv ice attacks, viruses, etc.) an d call m onitor - ing. Dif fe rent methods can be implemented to protect an IP environment fro m external a ...

  • Siemens 2000 - page 9

    Notes an d Symbols Gene ral Inform ation 9 Notes and S ymbols Safety Inf ormation that is important f or prev enting injury or damages is mark ed spec ially , as th ey ar e impo rt ant ins tr uctions f or corr ect use o f the uni t. Reference to operation steps T he f ollo wing s ymbols a re use d to ind icate th e dif f erent o perat ion-r elated ...

  • Siemens 2000 - page 10

    Step by Step General Information Notes and Symbols 10 Operating the telephone n Lif t the handset (o f f-hook). t Replace th e hand set ( on-ho ok). s Conduct a cal l. o Enter a telephone number or code. u or v Incr ease or re duce the val ue depe nding on the cur re nt oper atin g mode. optiPoint 41 0/4 20 ec onomy/econo my plus/sta n- dard/ advan ...

  • Siemens 2000 - page 11

    Notes an d Symbols Gene ral Inform ation 11 P roperties of the T eleph one Models Th is chapter giv es y ou an ov erview of the optiP o int 41 0/420 telephone models a nd their p ropertie s. Te l e p h o n e Model Fun ct i o n key s Connection of Side Car Uni t Dis play Lines x Ch aracters Head se t connection USB-Master Mini-Swit ch e. g. P C-co n ...

  • Siemens 2000 - page 12

    Settin g Up th e Teleph one Install ing the T elephone 12 S ett ing Up the T elephone This c hapter d escribes how to connect the individual elements of the optiP oint 41 0/420 with eac h other ( Æ Installi ng the T elep hone) and how to set up the device r eady fo r operation ( Æ Preparing for Operation ). Installing the T elephone Con nectors o ...

  • Siemens 2000 - page 13

    Instal ling the Te lephone Setting Up the Telephon e 13 Starting up the optiP oint 41 0/420 • Pl ug the short end of the handset cable into t he hand set an d the o ther end int o the co nnec tor 7 at t he bottom of th e teleph one a nd feed the cable th rough t he guide channel in the b ase un it. • Us ing the headset connec tor: Plug t he jac ...

  • Siemens 2000 - page 14

    Step by Step Settin g Up the Te lephone Preparing for Operation 14 P reparing for Operat ion F or th e opt iP oin t 41 0/ 420 e cono my/economy p lus/ stan - dard/advance follow the sequence desc ribed below . The seq uence for the optiP oint 41 0 entry is described from Æ page 1 6 . optiP oint 410/ 420 economy/ec onomy plus/ standard/advance If p ...

  • Siemens 2000 - page 15

    Prepa ring f or Operat ion Set ting Up th e Telep hone 15 Step by Step Only if no DHCP s erver: : Confirm. > : Confirm to switch the DHC P IP assig n off . The c h ange is di splayed. > : Choose an d confirm. : Confirm. o Enter IP addre ss of the optiP oint 41 0/420 (to e dit see Æ page 93 ). : Confir m. The IP a ddress is di splayed. > : ...

  • Siemens 2000 - page 16

    Step by Step Settin g Up the Te lephone Preparing for Operation 16 optiP oint 41 0 entry If p roble ms ar e encoun tere d durin g the initia l start up, or if you have queries o n indi vidua l speci ficat ions , the f ollow ing c hapter s will be of help : • F or s pecia lized informati on on th e ad mini stratio n of the o ptiP oint 41 0 entry s ...

  • Siemens 2000 - page 17

    Prepa ring f or Operat ion Set ting Up th e Telep hone 17 Step by Step Only if no DHCP s erver Pre s s 1 st function ke y . ddd Enter code to sw itch the DHCP IP ass ign off . r T erminat e th e o peratio n. Pre s s 1 st function ke y . de Enter code. o Enter IP addre ss of the optiPo int 41 0 entry (to e dit see Æ page 93 ). r T erminat e th e o ...

  • Siemens 2000 - page 18

    Step by Step Settin g Up the Te lephone Preparing for Operation 18 Other settings All other se tti ngs of y our optiP oint 41 0 entr y must b e made thro ugh the " Web-based M anagemen t T o ol " Æ page 42. Open the "Sys tem" page in your brow ser and enter the f ollow ing pa ramete rs: • PBX address Æ page 65 • P a rticip ...

  • Siemens 2000 - page 19

    Administration 19 Administration The f ollowin g page s desc ribe how to ma ke adminis trati on settings for the optiP oint 41 0/420 in a HiP ath 300 0/500 0 / HiPa th 400 0 sy stem. T here are dif f erent w ay s to mak e set tings: • Local ly on t he telep hone: – opti P oint 41 0 /420 economy/eco nomy plus/ sta ndard/advance Æ page 20 – op ...

  • Siemens 2000 - page 20

    Step by Step Administration optiPoint 410/420 economy/economy plus/standard/advance 20 optiP oint 41 0/420 ec onomy/ economy plus/standard/advance Access t o the Administration M enu All configu rat ion and d iagno stic op erati ons ar e pro tect- ed agains t illeg al acce sses by the Administr ator pa ss- word . e d g Press ke ys simulta neo usly ...

  • Siemens 2000 - page 21

    optiPoint 410/420 economy/economy pl us/standard/advance Administration 21 Step by Step Config urati ons DHCP I P Assi gnm ent F or d eta iled inf or mat ion see Æ page 62 . Enter "Adm inistration Menu" and go to the Configura- tion Me nu Æ pag e 20. : Confirm. : Confirm. or > : Confirm. The c h ange is di splayed. Te r m i n a l I P ...

  • Siemens 2000 - page 22

    Step by Step Administration optiPoint 410/420 economy/economy plus/standard/advance 22 Def ault Route F or detailed inf ormation see Æ page 62. Enter "A dministration Menu" and go to the Configura- tion Me nu Æ page 20. > : Choose and con firm. o Enter IP address (to edit see Æ page 93). : Confir m. The change is d isp layed. VLAN M ...

  • Siemens 2000 - page 23

    optiPoint 410/420 economy/economy pl us/standard/advance Administration 23 Step by Step QoS Lay er Options F or d eta iled inf or mat ion see Æ page 75 . Enter "Adm inistration Menu" and go to the Configura- tion Me nu Æ pag e 20. > : Choose an d confirm. : Confirm. or > : Choose an d confirm. or > : Choose an d confirm. or > ...

  • Siemens 2000 - page 24

    Step by Step Administration optiPoint 410/420 economy/economy plus/standard/advance 24 LAN Port 2 Mo de F or detailed inf ormation see Æ page 69. Enter "A dministration Menu" and go to the Configura- tion Me nu Æ page 20. > : Choose and con firm. : Confirm. or > : Choose and con firm. or > : Choose and con firm. or > : Choos ...

  • Siemens 2000 - page 25

    optiPoint 410/420 economy/economy pl us/standard/advance Administration 25 Step by Step Diagnost ics Display T est F or d eta iled inf or mat ion see Æ page 62 . Enter "Admi nistration Menu" and go to the Diagnostics Menu Æ p age 20. : Confirm. > P ress k ey to show the n ext displa y . > P ress k ey to show the n ext displa y . & ...

  • Siemens 2000 - page 26

    Step by Step Administration optiPoint 410/420 economy/economy plus/standard/advance 26 Key T e s t F or detailed inf ormation see Æ page 68. Ente r "A dminist ratio n Menu" a nd go to the Diag nostic s Menu Æ page 2 0. > : Choose and con firm. e.g. > , u or h Press any ke y (except : ) and read the dis play . : Confirm to end the ...

  • Siemens 2000 - page 27

    optiPoint 410/420 economy/economy pl us/standard/advance Administration 27 Step by Step PING T est F or d eta iled inf or mat ion see Æ page 7 4. Enter "Admi nistration Menu" and go to the Diagnostics Menu Æ p age 20. > : Choose an d confirm. : Confirm. or : Choose an d confirm. or : Choose an d confirm. or : Choose an d confirm. or ...

  • Siemens 2000 - page 28

    Step by Step Administration optiPoint 410/420 economy/economy plus/standard/advance 28 Line Status F or detailed inf ormation see Æ page 72. Ente r "A dminist ratio n Menu" a nd go to the Diag nostic s Menu Æ page 2 0. > : Choose and con firm. : Confirm. or > : Choose and con firm. T he c hange is displa ye d. SLK T est F or detai ...

  • Siemens 2000 - page 29

    optiPoint 410/420 economy/economy pl us/standard/advance Administration 29 Step by Step Restart W eb- base d Managem ent T o ol R eset via t he W eb-base d Manage ment T ool Æ page 42. 1 . Open the Dial og „Rest art T ermi nal“ . Menu: A dministrator A ctions > Re sta rt T erminal 2. Click on th e button „Resta rt “ . By pu lling the po ...

  • Siemens 2000 - page 30

    Step by Step Administration optiPoint 410/420 economy/economy plus/standard/advance 30 Error Messages No IP address T he DHCP serv er canno t assi gn an y term inal IP a ddre ss Æ page 80. P ossibl e solu tion: Chec k the DHCP s erv er . No LAN connection The teleph one i s unabl e to find a net work. P ossibl e solu tion: Check the network cable ...

  • Siemens 2000 - page 31

    optiPoint 410/420 economy/economy pl us/standard/advance Administration 31 Step by Step Other e rror mes sages The connec tion or logi n to th e dat abas e failed. No IP connec tion to the gat ew ay . The te lephone is not correctly furnished to the P ABX. No cl ient li censes exis t in th e gate wa y . (Empt y disp lay) No con nectio n to the p ow ...

  • Siemens 2000 - page 32

    Step by Step Administration optiPoint 410 e ntry 32 optiP oint 410 entry Af ter integrating the optiP oint 41 0 entry into y our net- work succes sfully Æ page 1 6, y ou can ma ke a ll other set tings thr ough th e "W eb-based Man agement T ool" Æ page 42. Entering the administration area All configu rat ion and d iagno stic op erati on ...

  • Siemens 2000 - page 33

    optiPoint 410 e ntry Adm inistrati on 33 Step by Step Restart W eb- base d Managem ent T o ol R eset via t he W eb-base d Manage ment T ool Æ page 42. 1 . Open the Dial og „Rest art T ermi nal“ . Menu: A dministrator A ctions > Re sta rt T erminal 2. Click on th e button „Resta rt “ . Enter the administration ar ea Æ page 32. Functi on ...

  • Siemens 2000 - page 34

    Step by Step Administration optiPoint 410 e ntry 34 Reset f actory setting s F or st andard values , see Æ page 96. Discon nect the red W est ern pl ug of t he power supply unit cab le (Pos. 3 Æ page 1 2) or , i f "Po wer over LAN", disc onnect the L AN cable (P os. 1 Æ page 1 2 ) from the optiP oint 41 0 entry f or a f ew seconds. W e ...

  • Siemens 2000 - page 35

    optiPoint 410 e ntry Adm inistrati on 35 Step by Step Error Messages The LE Ds flash till you s witch to th e Administrati on Mode Æ pa ge 32. LEDs o n the p hone: No IP ad dress The DHCP server cannot assig n a terminal IP address Æ page 80. P oss ible s oluti on Chec k the DHCP server . No terminal screen The DHCP serv e r cannot assign a termi ...

  • Siemens 2000 - page 36

    Step by Step Administration optiPoint 410 e ntry 36 No terminal screen is set The DHCP I P assi gnme nt Æ pa ge 62 is swit ched off and no termi nal screen is configured. P ossibl e solu tion Ac tivate the DHCP IP assignme nt Æ page 1 7. Enter the terminal IP address Æ page 1 7. No Def ault Route i s set The DHCP IP assi gnment Æ page 62 66 is ...

  • Siemens 2000 - page 37

    optiPoint 410 e ntry Adm inistrati on 37 Step by Step No PBX addres s No PBX address Æ page 65 is configur ed. P oss ible s oluti on Enter the PBX addr ess Æ pag e 1 8. The PBX does not react The telep hone cann ot fi nd the P BX Æ page 8 6. P oss ible s oluti on Chec k the PBX. Log i n fail ed Th e P B X N o . Æ page 65, P articipant No. Æ pa ...

  • Siemens 2000 - page 38

    Step by Step Administration op tiPoint dis play module 38 optiP oint display module Firmware Update T o update y our optiP o int display mod ule, perform the f ollow ing st eps: 1 . Make sure th at an F TP ser ver is av a ilabl e, se e Æ pag e 8 9, a nd tha t th e re leva nt f irm ware fil e i s stored on the se rver . 2. Start the W eb-B ased Man ...

  • Siemens 2000 - page 39

    optiPoint d isplay modu le Administ ration 39 Step by Step Configuring th e LDAP Se rv er P erform the fo llowing steps to enter th e LD AP server IP address an d por t numbe r: 1 . St art t he W eb- Based Manage ment T oo l, see Æ page 43. 2. Selec t "Administra tion" > [password] > "App lica- tions" > "LD AP&quo ...

  • Siemens 2000 - page 40

    Step by Step Administr ation optiPoin t applic ation mod ule 40 optiP oint applicat ion module Firmware Update P erf orm the f ollo wing st eps to up date th e sof tware on yo ur opti P oint ap plicat ion modul e: 1 . Make sure th at an F TP ser ver is av a ilabl e, se e Æ pag e 8 9, a nd tha t th e re leva nt f irm ware fil e i s stored on the se ...

  • Siemens 2000 - page 41

    optiPoint applic ation m odule Administ ration 41 Step by Step Configuring th e LDAP Se rv er P erform the fo llowing steps to enter th e LD AP server IP address an d por t numbe r: 1 . St art t he W eb- Based Manage ment T oo l, see Æ page 43. 2. Selec t "Administra tion" > [password] > "App lica- tions" > "LD AP ...

  • Siemens 2000 - page 42

    Step by Step Administration Web-based Management Tool 42 W eb-based Ma nageme nt T ool General T he optiP oint 41 0/420 is equip ped with an H TTP w eb serv er that permits the mapping of the telephone's con- tent on the web bro wser of a PC integrated in the LAN ("W eb- based Man agement T o ol"). T he w eb-based manage ment too l c ...

  • Siemens 2000 - page 43

    Web-based Management Tool Administration 43 P reparation Open web-ba sed mana gement tool T o in voke the interf ac e, open a web bro wser and en ter the f ollowing URL: F or optiP oint 41 0/420 economy plus/standard/ad vance: ht tps://[IP of the telephone] F or optiP oint 41 0 entry/economy: ht tp://[IP of the telephone] wher e [IP of th e telepho ...

  • Siemens 2000 - page 44

    Administration Web-based Management Tool 44 W eb-based Management struct ure • General In formation Æ page 4 5 • Administrator Actio ns – Chang e Admi nistra tor P assw ord Æ page 45 – Reset U ser Password – Clear Sc reenlo ck P assw ord Æ page 4 6 [1 ] –C l e a r U s e r D a t a Æ page 46 [1 ] – R esta rt T erm ina l Æ pa ge 4 6 ...

  • Siemens 2000 - page 45

    Web-based Management Tool Administration 45 General Information General I nformatio n Administr ato r Actions Change administrator password Click on the required field to see a descriptio n f or each parameter . ...

  • Siemens 2000 - page 46

    Administration Web-based Management Tool 46 Clea r screenlock pass word (Only for optiP oi nt 41 0/4 20 st andard/advance available) Clea r user d ata (Only for optiP oi nt 41 0/4 20 st andard/advance available) Restart terminal Fac to ry Re s e t Clic k on the req uired fi eld to see a descr iption f or each pa rameter . ...

  • Siemens 2000 - page 47

    Web-based Management Tool Administration 47 Applications (Only f or optiP oint 41 0/420 stan dard/ad vance a va ilable) Diall ing Prop erti es (Only f or optiP oint 41 0/420 stan dard/ad vance a va ilable) Java H TTP Se tti n g s (Only f or optiP oint 41 0/420 stan dard/ad vance a va ilable) LD AP se ttings (Only f or optiP oint 41 0/420 stan dard/ ...

  • Siemens 2000 - page 48

    Administration Web-based Management Tool 48 WA P g a t e w a y (Only for optiP oi nt 41 0/4 20 st andard/advance available) W A P Favou r ite s (Only for optiP oi nt 41 0/4 20 st andard/advance available) Mis cellane ous (Only for optiP oi nt 41 0/4 20 st andard/advance available) Clic k on the req uired fi eld to see a descr iption f or each pa ra ...

  • Siemens 2000 - page 49

    Web-based Management Tool Administration 49 Audio Au d i o s e tt i n g s Diagnost ics Diag nosti c T est s T est results Click on the required field to see a descriptio n f or each parameter . Click on the required field to see a descriptio n f or each parameter . ...

  • Siemens 2000 - page 50

    Administration Web-based Management Tool 50 File transfer Fil e T rans fer (optiPoint 41 0/42 0 stan dard/ advance) LD AP FTP Set tings (Onl y f or optiPoint 41 0/420 standard/ advance a vailable ) Clic k on the req uired fi eld to see a descr iption f or each pa rameter . ...

  • Siemens 2000 - page 51

    Web-based Management Tool Administration 51 Ja va FTP Settin gs (Only f or optiP oint 41 0/420 stan dard/ad vance a va ilable) ENB F TP S ettings (Only f or optiP oint 41 0/420 stan dard/ad vance a va ilable) File T r ansfe r (optiP oint 41 0/420 entr y/econom y/econom y plus) ...

  • Siemens 2000 - page 52

    Administration Web-based Management Tool 52 Network Netw ork an d Routi ng (LAN P or t 2 Mode o nly f or optiP oint 4 1 0/420 ec onomy plus/standa rd/ad- vance available) Clic k on the req uired fi eld to see a descr iption f or each pa rameter . ...

  • Siemens 2000 - page 53

    Web-based Management Tool Administration 53 Quality of Service (QoS) SNMP settings Click on the required field to see a descriptio n f or each parameter . ...

  • Siemens 2000 - page 54

    Administration Web-based Management Tool 54 QoS Data Collection Clic k on the req uired fi eld to see a descr iption f or each pa rameter . ...

  • Siemens 2000 - page 55

    Web-based Management Tool Administration 55 Sy s t e m DL S Settings Gateway set tin gs Click on the required field to see a descriptio n f or each parameter . ...

  • Siemens 2000 - page 56

    Administration Web-based Management Tool 56 Po r t S e t t i n g s Port C on tro l Clic k on the req uired fi eld to see a descr iption f or each pa rameter . ...

  • Siemens 2000 - page 57

    Web-based Management Tool Administration 57 SRSR Set tings Time Set tings V OIP Encryption Set tings Only f or optiP o int 41 0/420 econom y plus/standard/adv ance with sof tware version 5.x an d high er on H iPath 30 00/ 50 0 0 (versi on 6.0 an d high er) or Hi- P ath 4000 (ver sion 3.0 and higher). Click on the required field to see a descriptio ...

  • Siemens 2000 - page 58

    Alph abetical Refer ence Descr iption of functio ns 58 Alph abet ical Referen ce This glos sary of fers basic information th at can b e used by the admini strato r to ca rry ou t config uratio n- a nd diagn ost ics-relat ed j obs in t he op tiP oin t 41 0/ 420. • The Chapter “Desc ripti on of f unctio ns“ expla ins alpha beti cally sor ted te ...

  • Siemens 2000 - page 59

    Description of functions Alphabetic al Reference 59 Ad m in is t ra ti o n Pas swo r d • Here you can change the password that is ne cessa ry for accessi ng t he administrator are a. • V alid v alues: Nu meric • Minim um l engt h: 6 ( f or more informat ion, see Æ Pa ssw ord F unction s) • Maximu m leng th: 9 • Stand ard v alue: 1 23456 ...

  • Siemens 2000 - page 60

    Alph abetical Refer ence Descr iption of functio ns 60 Clear Screenlock P assword • Only confi gurable on o ptiP oint 41 0/ 420 st andard/advance and only re- quired if a disp lay module or app licati on mod ule will be use d. • Herewith th e u ser password will be reset. Æ pag e 46 Clear User Data • Only confi gurable on o ptiP oint 41 0/ 4 ...

  • Siemens 2000 - page 61

    Description of functions Alphabetic al Reference 61 Compression • Ch ose the compres sion m ode whic h has t o be used , if Æ Codec „Lo- Band“ was select ed ( Æ G.723 oder Æ G.729). •S t a n d a r d v a l u e Æ pag e 96. Æ page 49 Compressing Code c Thres hold V alues •P a c k e d Æ Codec • L ost pa ck et th reshold s [in P romill ...

  • Siemens 2000 - page 62

    Alph abetical Refer ence Descr iption of functio ns 62 Defa ult Route • E nter the Æ IP address tha t was assign ed to your Æ PBX if no Æ DHCP se rver as signs thi s val ue dynam ically . • If the value was assigne d dynamic all y , it can only be read. • A restart is necessary afte r the change. •S t a n d a r d v a l u e Æ page 9 6. ? ...

  • Siemens 2000 - page 63

    Description of functions Alphabetic al Reference 63 DNS Addre sses • Ente r th e Æ I P address o f the Æ DNS serv er her e only if no Æ DHCP server assi gns t his value dynam icall y ( Æ DHCP) and the optiP oi nt 41 0/ 420 is opera ted on a Æ PBX through Æ HF A. • Standa rd address Æ page 9 6. • IP ed itor i n opt iP oint 41 0/4 20 Æ ...

  • Siemens 2000 - page 64

    Alph abetical Refer ence Descr iption of functio ns 64 Emergency Number • P aramete r f or use i n US onl y . • E nter the tel phone num ber whic h automa tically sh all be di aled af ter 1 secon d. Æ pag e 55 Fac to ry R e se t • With this function y ou can reset all admi nistration parameter s to the origin al settings at the ti me of deli ...

  • Siemens 2000 - page 65

    Description of functions Alphabetic al Reference 65 FTP Set tings • Onl y conf igur able o n optiP oint 41 0/420 sta ndar d/adv ance a nd onl y re- quired if a dis play modul e or a pplica tion mo dule wil l be used . • Displa ys the location of the do wnload file via the regarding Æ FTP- Serv er . • F ollo wing se rve rs ar e a vail able: ? ...

  • Siemens 2000 - page 66

    Alph abetical Refer ence Descr iption of functio ns 66 H.225.0 Call Sign alling • E nter the Æ P or t-Num ber for transfer of H.22 5.0 C all Si gnal ling . • Us e: cont rol of connec tion f or Æ Vo I P . •S t a n d a r d v a l u e Æ page 9 6. Æ pag e 56 H.245 TCP Cha nnel • E nter the Æ P ort-Number f or transf er of H.245 TCP Channel ...

  • Siemens 2000 - page 67

    Description of functions Alphabetic al Reference 67 HTTP Username • Onl y conf igur able o n optiP oint 41 0/420 sta ndar d/adv ance a nd onl y re- quired if a dis play modul e or a pplica tion mo dule wil l be used . • Ente r the n ame acc ording t o the us er n ame sto red in t he Æ FTP-Server f or accessing the FTP server . • T he nam e h ...

  • Siemens 2000 - page 68

    Alph abetical Refer ence Descr iption of functio ns 68 J itt e r B u ffe r • Select the durati on of the intermediate storage here (number of data pac k ets) th at c hanges the ef f ect o f the Æ Jitter. • Th e more st able the net work connection, the shorte r the selected buf f- er time (less v oice d elay) . • Depend ing on t he freque nc ...

  • Siemens 2000 - page 69

    Description of functions Alphabetic al Reference 69 LAN Port S e ttin gs • He re y ou must d efine th e band width at w hic h the op tiP oint 41 0/420 should be run. The required value depend s on the ba ndwidt h tha t the switch or router suppo rts in the network. • A restar t is necessary af ter the change. Æ pag e 23 Æ page 52 Languag e ? ...

  • Siemens 2000 - page 70

    Alph abetical Refer ence Descr iption of functio ns 70 LD AP templat e examp le T emplate-String declaration SEAR CHBA SE "O=SIEM ENS COMM, C=GB" organisation an d speci- ficat ion of count ry SEARCHFIL TER1 = " surnam eNat iona l,Surn ame" s earch criteri on (f ast an d adv ance d) SEAR CHFIL TER2 = "gi venN ameNati onal,F ...

  • Siemens 2000 - page 71

    Description of functions Alphabetic al Reference 71 Exam ple for assu mption (Copy & Paste) optiP oint 4 1 0 LD AP TEMPL A TE (V1) SEARCHB ASE "O=SIEMENS COMM, C=GB" SEARCHFI L TER1 = "sur nam eNa tional ,Su rname " SEARCHFIL TER2 = "giv enNameNati onal,F irst-name" SEARCHFIL TER3 = "department,Departm ent&quo ...

  • Siemens 2000 - page 72

    Alph abetical Refer ence Descr iption of functio ns 72 LD AP T emplat e File name • Only confi gurable on o ptiP oint 41 0/ 420 st andard/advance and only re- quired if a disp lay module or app licati on mod ule will be use d. •I f a n Æ LD AP server is us ed, enter the name of the LD AP template file that is us ed in co nnec tion wi th thi s ...

  • Siemens 2000 - page 73

    Description of functions Alphabetic al Reference 73 Local Area Cod e • Onl y conf igur able o n optiP oint 41 0/420 sta ndar d/adv ance a nd onl y re- quired if a dis play modul e or a pplica tion mo dule wil l be used . • Specif y the lo cal area code of your co mpany here, e. g ., "8 9" for Munich. • Canonica l f ormat Æ page 83. ...

  • Siemens 2000 - page 74

    Alph abetical Refer ence Descr iption of functio ns 74 Minimal Session Length • f o r QDC ( QoS Dat a Coll ecti on) •S t a n d a r d v a l u e Æ page 9 6. Æ pag e 54 Natio nal Di al Prefix • Only confi gurable on o ptiP oint 41 0/ 420 st andard/advance and only re- quired if a disp lay module or app licati on mod ule will be use d. • Cano ...

  • Siemens 2000 - page 75

    Description of functions Alphabetic al Reference 75 QCU Home Addre ss • En ter the Æ IP address of the QCU- Server on which the QoS-Dat a have to be reported. •S t a n d a r d v a l u e Æ pag e 96. Æ page 54 QCU Standb y Addre ss • Only available wh en using a seco nd commun icatio n platform. • En ter the Æ IP address of the QCU- Serve ...

  • Siemens 2000 - page 76

    Alph abetical Refer ence Descr iption of functio ns 76 Repo rt Mode • Choose the accordi ng Report M ode: – 1: A repor t will be sent at the en d of a sessi on when t he thres hold wa s re a che d . – 2: A report wil l be sent with in eac h Æ R epor t Interval when the thresho ld was reached. – 3: A repor t allways will be sen t at th e en ...

  • Siemens 2000 - page 77

    Description of functions Alphabetic al Reference 77 Servic e Agent Reque st • Ente r th e Æ Po rt-Nu mber f or transf er of the Service Agent R equests. Æ page 56 Security Set ting • Select the de sign ated value f rom th e list for the secu rit y setting for the Æ Gatew ay. Æ page 55 Silence Suppression • Wi th thi s switch you can de fi ...

  • Siemens 2000 - page 78

    Alph abetical Refer ence Descr iption of functio ns 78 SNMP Server A ddress •I f a n Æ SNMP server exi sts in the network, enter the Æ IP address of this se rver here. • Standard addres s Æ page 96. Æ pag e 53 SNMP T rap P ort • Define th e Æ Port here t hrough w hich the Æ S NM P erro r mes sa ge s should be transmi t ted. Æ pag e 53 ...

  • Siemens 2000 - page 79

    Description of functions Alphabetic al Reference 79 SRSR Sw itch T o Standb y Retry Count • Max imum numb er of ne gativ e at tempts f or swit chin g ov er to the stan dby mode. • If all at tempts f ail, it will be c hanged to t he home mo de (standar d mode). • V alid v alue: 1 ... 25 5. •S t a n d a r d v a l u e Æ pag e 96. Æ page 57 S ...

  • Siemens 2000 - page 80

    Alph abetical Refer ence Descr iption of functio ns 80 Te r m i n a l I P A d d r e s s • E nter the Æ IP address for the opt iP oint 4 1 0/4 20 he re, provided no Æ DHCP se rver as signs thi s value dynamic ally ( Æ DHCP). • If the value was assigne d dynamic all y , it can only be read. • A restart is necessary afte r the change. •S t ...

  • Siemens 2000 - page 81

    Description of functions Alphabetic al Reference 81 VLAN Method • Can be defined o nly if the Æ Layer 2 suppor t is activated ( Æ QoS L2/ L3). • Here you mu st de fine the lo cati on from w here th e Æ Default VLAN ID should be fetched, if Æ VLAN i s used . Æ pag e 22 Æ page 1 7 Æ page 5 2 V oIP Encryptio n Set tings • Only for optiP o ...

  • Siemens 2000 - page 82

    Alph abetical Refer ence Descr iption of functio ns 82 WA P G a t e w a y A d d r e s s • Only confi gurable on o ptiP oint 41 0/ 420 st andard/advance and only re- quired if a disp lay module or app licati on mod ule will be use d. •I f a Æ W AP server exists, enter the Æ IP address of this serv er here. • Standard addres s Æ page 96. Æ ...

  • Siemens 2000 - page 83

    Abbrevia tions and S pecialize d Terms Alphabe tical Re ference 83 Abbreviations and Specialize d T er ms Y ou will find more inf ormation in the rele vant literat ure on the Network Te c h n o l o g y a n d Æ Vo I P . Canonica l Format T he canoni cal f ormat is an intern ationa l standar disa tion of call number s. In order f or to be able to di ...

  • Siemens 2000 - page 84

    Alp habetic al Refere nce A bbrevia tions and Sp eciali zed Terms 84 ENB P erson al T elephon ebook o f the d ispla y mod ule or ap plicat ion mod ule. FTP Abbreviation f or " F ile T ran sfer P ro tocol". Is used f o r transf e rring file s in networks, e.g., to update telephone sof t- wa re Æ page 50. G.7 1 1 Audio protoc ol for uncomp ...

  • Siemens 2000 - page 85

    Abbrevia tions and S pecialize d Terms Alphabe tical Re ference 85 IP Abbre viation for " I nternet P rotokoll". IP addr ess Also called " Æ IP" in shor t. The u nique address of a ter minal device in the networ k. It cons ist s of four number blo cks of 0 to 255 each, separat ed by a point . T o simpl ify the n ota tion , voic ...

  • Siemens 2000 - page 86

    Alp habetic al Refere nce A bbrevia tions and Sp eciali zed Terms 86 MIB Abbreviation f or " M anagemen t I nf ormation B ase". Data base cont ai ning des crip tions of error me ssage s of th e devices a nd functions in a network. PBX Abbreviation f or " P ri vate B ranch e X ch a ng e" . Priv ate telephone system that connects ...

  • Siemens 2000 - page 87

    Abbrevia tions and S pecialize d Terms Alphabe tical Re ference 87 SIP Abbre viation for " S ession I nitiati on P roto col". P rotoc ol stand ard f or initi alising calls in Æ IP networks. SLK Only f or optiP oint 420 telephones. SLK (Se lf-Labeling-K ey) means, that the labeling fields of the function k ey s automatically display the s ...

  • Siemens 2000 - page 88

    Alp habetic al Refere nce A bbrevia tions and Sp eciali zed Terms 88 Swit ch T ransmis sion pos ition in a star -shaped netw ork. URL Abbr evia tion f or Unif orm Re sourc e L ocator . Th e URL i s the ad dres s of a file (sit e), which i s acces sible vi a the interne t. The URL co nsis ts of: • t he acces s pro tocol • t he host na me of the ...

  • Siemens 2000 - page 89

    Setting up the FTP se rver Adminis tration scenari os 89 Administration scenarios S e tting up the F TP server There are sever al po ssibi litie s of per f orm ing uplo ad and downl oad ope ra- tions f o r the optiP oint 41 0/420. • With the help of a web interf ace in an Internet browser (e.g., Internet Explor er 5.5), Æ page 42. • By using t ...

  • Siemens 2000 - page 90

    Admi nistra tion sc enario s Set ting up the FTP s erver 90 Installat ion and configuration 1 . Install the sof tware (in the examp le "3Cse rver", that can be downloade d from http://www .3 com.co m ). 2. Star t the server pr ogram. 3. Y ou can set up us er pr ofiles or per mit anon ymous a ccess, as in thi s ex- ample . This is the s im ...

  • Siemens 2000 - page 91

    Check handset f unctional ities Administra tion sce narios 91 Chec k handset f unctionalit ies • Check whet her the pl ugs a t the t wo ends of the handse t cable a re in- ser ted c orrectly ( handset eng aged) Æ page 1 2. • Carry out an A u dio Loop test. – Mor e inf ormation on “ A udio Lo op T est“ Æ pag e 59. – Æ pag e 26 • Ens ...

  • Siemens 2000 - page 92

    Admini strat ion s cena rios Improve spee ch qu ality 92 Improve speec h quality • Ch ange th e QoS pa ramete rs. – More inf ormat ion on “Q oS L2/L3“ Æ pag e 75. – Æ page 23 Æ page 25 • Incr ease the "Jit te r" buf fer ti me f or the optiP oint 41 0 entry. – More inf ormation o n “Jit ter Buf fer “ Æ pa ge 68. . • ...

  • Siemens 2000 - page 93

    Number Editor Editors 93 Edit o rs Numb er Edito r P ermitted: Nu meric values. o Spec ify th e numb ers. < Pr ess this ke y to delete one ch aracter at a time to the lef t. u v In case of n egat ive numbers, press th is key to c han ge th e prefixed si gn. Example : 22 35 IP Numbe r Edit or P ermit ted: Integer v alues fr om 0 to 255 and dots ( ...

  • Siemens 2000 - page 94

    Editors Temina l Mas k Ed itor 94 T e minal Mask Editor V alid val ues: 0 Bit (000.0 00.0 00.0 00) to 32 Bit (255.2 55.255.255). q Press key to set a b lock’ s value t o "255 ". r Press key to set a b lock’ s value t o "0 0 0". > Press key to increm ent the value by 1 bit. < Press key to decrem ent th e value by 1 bit ...

  • Siemens 2000 - page 95

    Text Ed itor Editors 95 T ext Editor Characte r entry is per f o rmed by mult iple presses o f the keypad key s ac - cording to the f ollowing tables. This also applies to entry of alphanumeric pass word s. Example: "+" = press the r key 1 7 t im e s. optiP oint 41 0/420 economy/ec onomy p lus/standar d/adv ance < P ress ke y to delet ...

  • Siemens 2000 - page 96

    Factory De fault Setting s Standa rd value 96 Factory Default S e ttings Standa rd v alue Functi on standar d va lue Ac oustic f ilter 0 Admin ist ra tio n pa ssword Æ Pas swo r d Fun ct i on s 1 23456 Appl ication D L filename [[1]] ipp hone.ap p Audio mode G.71 1 always A vg ro und tr ip dela y thre shold 1 00 Configu ration D L filenam e OP400- ...

  • Siemens 2000 - page 97

    Standard va lue Fa ctory Default Sett ings 97 Local Country Code [2] 44 Lo st pac ket t hresh olds 1 0 Max jit ter threshold 1 5 Mini mal Se ssio n Lengt h 255 Mobili ty On Nati onal D ial P refix [2 ] 0 Observation Interv al 1 0 Pa cke t Size Auto QCU home add ress 0.0.0.0 QoS L 2/L3 On QoS L ayer 2 Def ault 0 QoS Layer 2 V oice /Si gnal ling 5 Qo ...

  • Siemens 2000 - page 98

    Factory De fault Settings Password Fun ctions 98 Pa s s w o rd F u n c t i o n s The minim um password leng th can be predef ined in the De ploy- ment T ool. P assword Function set ting User Password Protects the user -spe cifi c settings of t he optiP oint 41 0/420. Adm inistrator P asswo rd P rotects the administration area from un au- thori zed ...

  • Siemens 2000 - page 99

    Programma ble Ke ys opt iPoint 410/4 20 economy /economy p lus/st andar d/advan ce Fact ory Defau lt 99 P rogrammable Keys optiP oint 41 0/420 economy/ economy plus/standard/advance Key-Layout T as te F un kti on H iP ath 3000 /5 00 0 F unk tio n Hi P ath 4000 1 Program/Serv ice Program/Ser vice 2R e d i a l R e d i a l 3M u t e M a i l b o x 4 Spe ...

  • Siemens 2000 - page 100

    Data Visua lisation (optiPoint 410 entry only) Status M essages 100 Data Visualisation (optiP oint 41 0 entry only) F or error messages on the optiP oint 41 0 entry see Æ page 35. Stat us Messag es Binary enc oded ASCI I table The ta ble il lustra tes in which way c ha racters are d isplayed on t he LED s of the optiP oint 41 0 entry. LEDs Quie sc ...

  • Siemens 2000 - page 101

    Binary enc oded ASCII table Technica l data 101 Te c h n i c a l d a t a optiP oint 41 0/420 economy/ec onomy plus/standard/adv ance Pr otocols H.323, H.225 , H.245, TCP/IP , FTP , DHCP , SNTP , SR TP/SRTCP [[1]] Gatekeeper routed and direct route d call mode l [1] Only for optiPoint 410/42 0 economy p lus/stand ard/advance w ith soft ware ve rsion ...

  • Siemens 2000 - page 102

    Techn ica l data Bina ry enc ode d ASCI I ta ble 102 optiP oint 410 entry Pr otocols H.323 , H.225, H. 245, TCP/IP , FTP , DHCP , SNTP Gat ekee pe r rou te d a nd d ire ct rout ed cal l mo de l V oi ce algo rith ms G.71 1 ( 64 kbi t/s) , G.723. 1 (6,4 kbit/s) Room echo co mpen sati on Interf aces IEEE 802.3 F ast Ethernet (1 0/1 0 0 Mbit/s) 2 x RJ ...

  • Siemens 2000 - page 103

    optiPoin t 410/420Op eration C odes S ummary 103 Oper ation Codes Summary In the following page s you will find a list of the reference nu mbers correspo ndin g to th e adminis trati on an d diag nosti cs f unctio ns i n t he op tiP oint 41 0/420 econom y/econom y plus/ standar d/adv ance and the o ptiP oint 41 0 entry in the alphabe tical order . ...

  • Siemens 2000 - page 104

    Operation Codes SummaryoptiPoint 410/420 104 Diagno sti cs Operation optiP oint 41 0/420 economy/ economy pl us ( Æ Administratio n Interfac e) opti Poi nt 41 0/ 420 standard/ad vance ( Æ Ad m in is t ra t i o n In ter - fac e) Refer t o Displ ay T est : > :: > : Æ page 62 LED T est df : df : Æ page 7 2 Key T est dg o :d g o : Æ page 6 8 ...

  • Siemens 2000 - page 105

    optiPoint 410 entryOperation Codes Summary 105 optiP oint 410 entr y Administrat ion Int erface Conf igura tions Further fu nctions Operat ion optiP oint 41 0 entr y Ref er to Configurations edg ( simult. ) o r Æ pag e 20 Operat ion optiP oint 41 0 entry Re fer t o Def ault Rou te dg o r Æ pa ge 62 DHCP IP Assi gnment dd o r Æ pa ge 62 F actor y ...

  • Siemens 2000 - page 106

    Menu struct ureoptiP oint 410/420 106 Menu stru ct ure T he f ollo wing tabl e show s a co ncerned o verv iew of the me nu str uctur e of the optiPoint 41 0 /4 20. optiP oint 41 0/420 Men u Operati on steps Ex plan at ion |--- A dministration? | |--- 0 1=Configuration? | | |--- 0 1=DHC P IP assign? Æ page 21 Æ page 62 | | |--- 02=T er minal IP ad ...

  • Siemens 2000 - page 107

    107 Index Index The colored page nu mbers l ead in each case to the d escrip tio n of th e opera tion at the follo win g device/su rface • optiP oint 41 0/420 econ omy/ economy plus/ sta ndard/a dvance • optiP oint 41 0 entry • W eb-b ased M anage ment T ool • Bold : Expl anatio ns in Glossa r A Abbreviations 83 Acous tic Fi lter 45 , 58 Ac ...

  • Siemens 2000 - page 108

    108 Index H H.225. 0 Call Sign alling 56 , 66 H.225. 0 RAS 56 , 65 H.245 TCP Channel 56 , 66 Handsfree di stance 3 Help Internet URL Base 48 , 66 HTTP Gateway/Proxy Address 47 , 66 HTTP Passwo rd 47 , 66 HTTP Port Number 47 , 56 , 66 HTTP Username 47 , 67 HTTPS 56 , 66 I Improv e spee ch qual ity 92 IP Routing 52 , 67 J Java Midl et File name 50 , ...

  • Siemens 2000 - page 109

    109 Index R RAM Test 26 , 49 , 75 Report Interval 54 , 75 Report Mode 54 , 76 Restart Terminal 29 , 33 , 46 , 76 ROM Test 26 , 76 RTP Port Base 56 , 76 S Security Setting 55 , 77 Serial nu mber 7 Service Agent Request 56 , 77 Silenc e Suppress ion 49 , 77 SNMP 77 active 53 , 77 Password 53 , 77 Server Address 53 , 78 Trap Port 53 , 78 Software-Vers ...

  • Siemens 2000 - page 110

    © Siemens AG 2005 Siemens Communic ations Hofmannstr . 51 • D-81359 München B e s t e ll - N r . : A 3100 3 - A 20 5 6 - B 415 - 7 - 7 6 A9 Subject to availability . Right o f modification reser ved. Printed in the Federal Republic o f Germany . 09. 11. 05 www .siemens.com/hipath The information provided in this document contains merely general ...

Manufacturer Siemens Category Projector

Documents that we receive from a manufacturer of a Siemens 2000 can be divided into several groups. They are, among others:
- Siemens technical drawings
- 2000 manuals
- Siemens product data sheets
- information booklets
- or energy labels Siemens 2000
All of them are important, but the most important information from the point of view of use of the device are in the user manual Siemens 2000.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Siemens 2000, service manual, brief instructions and user manuals Siemens 2000. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Siemens 2000.

Similar manuals

A complete manual for the device Siemens 2000, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Siemens 2000 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Siemens 2000.

A complete Siemens manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Siemens 2000 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Siemens 2000, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Siemens 2000, that we can find in the current document
3. Tips how to use the basic functions of the device Siemens 2000 - which should help us in our first steps of using Siemens 2000
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Siemens 2000
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Siemens 2000 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Siemens 2000?

Use the form below

If you did not solve your problem by using a manual Siemens 2000, ask a question using the form below. If a user had a similar problem with Siemens 2000 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)