Manual Kenmore 110.6707

56 pages 5.86 mb
Download

Go to site of 56

Summary
  • Kenmore 110.6707 - page 1

    L ! T ® Oasis Electric Dryer Secadora el_ctrica Models/Modelos 110.6705_, 6706_, 6707_ = color number/n_mero de color W10035160 Sears Roebuck and Co., Hoffman Estates, I L 60179 U.S.A. www.sears.com ...

  • Kenmore 110.6707 - page 2

    TABLE OF CONTENTS PROTECTION AGREEMENTS ....................................................... 2 WARRANTY ..................................................................................... 3 DRYER SAFETY .............................................................................. 4 INSTALLATION INSTRUCTIONS ................................... ...

  • Kenmore 110.6707 - page 3

    KENMORE ELITE ®APPLIANCE WARRANTY ONE YEAR LIMITED WARRANTY When installed, operated and maintained according to all instructions supplied with the product, if this appliance fails due to a defect in material or workmanship within one year from the date of purchase, call 1-800-4-MY-HOME ®to arrange for free repair. If this appliance is used for o ...

  • Kenmore 110.6707 - page 4

    DRYER SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the s ...

  • Kenmore 110.6707 - page 5

    INSTALLATION INSTRUCTIONS Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. • Flat-blade screwdriver • Tin snips (new vent • #2 Phillips screwdriver installations) • Adjustable wrench that • Level opens to 1" (2.5 cm) or • Vent clamps hex-head soc ...

  • Kenmore 110.6707 - page 6

    Installation Clearances The location must be large enough to allow the dryer door to open fully. Dryer Dimensions * Most installations require a minimum 5" (12.7 cm) clearance behind the dryer for the exhaust vent with elbow. See "Venting Requirements." Installation spacing for recessed area or closet installation The following spaci ...

  • Kenmore 110.6707 - page 7

    It is your responsibility • To contact a qualified electrical installer. [] To be sure that the electrical connection is adequate and in conformance with the National Electrical Code, ANSI/NFPA 70-latest edition and all local codes and ordinances. The National Electric Code requires a 4-wire supply connection for homes built after 1996, dryer cir ...

  • Kenmore 110.6707 - page 8

    Power Supply Cord Fire Hazard Use a new UL listed 30 amp power supply cord. Use a UL listed strain relief. Disconnect power before making electrical connections. Connect neutral wire (white or center wire) to center terminal (silver). Ground wire (green or bare wire) must be connected to green ground connector. Connect remaining 2 supply wires to r ...

  • Kenmore 110.6707 - page 9

    Put power supply cord through the strain relief. Be sure that the wire insulation on the power supply cord is inside the strain relief. The strain relief should have a tight fit with the dryer cabinet and be in a horizontal position. Do not further tighten strain relief screws at this point. Style 2: Direct wire strain relief Unscrew the removable ...

  • Kenmore 110.6707 - page 10

    1= 2. A Remove center silver-colored terminal block screw. Remove neutral ground wire from external ground conductor screw. Connect neutral ground wire and the neutral wire (white or center wire) of power supply cord under center, silver-colored terminal block screw. Tighten screw. D E 5. Tighten strain relief screws. 6. Insert tab of terminal bloc ...

  • Kenmore 110.6707 - page 11

    3. Connect ground wire (green or bare) of direct wire cable to external ground conductor screw. Tighten screw. A 1. 2. Loosen or remove center silver-colored terminal block screw. Connect neutral wire (white or center wire) of power supply cord to the center, silver-colored terminal screw of the terminal block. Tighten screw. A. External ground con ...

  • Kenmore 110.6707 - page 12

    When connecting to the terminal block, place the hooked end of the wire under the screw of the terminal block (hook facing right), squeeze hooked end together and tighten screw, as shown. 1. 2. Loosen or remove center silver-colored terminal block screw. Place the hooked end of the neutral wire (white or center wire) of direct wire cable under the ...

  • Kenmore 110.6707 - page 13

    • Remove excess flexible metal vent to avoid sagging and kinking that may result in reduced airflow and poor performance. Fire Hazard Use a heavy metal vent. Do not use a plastic vent. Do not use a metal foil vent. Failure to follow these instructions can result in death or fire. • Do not install flexible metal vent in enclosed walls, ceilings ...

  • Kenmore 110.6707 - page 14

    • Do not use an exhaust hood with a magnetic latch. Improper venting can cause moisture and lint to collect indoors, which may result in: [] Moisture damage to woodwork, furniture, paint, wallpaper, carpets, etc. [] Housecleaning problems and health problems. Choose your exhaust installation type Recommended exhaust installations Typical installa ...

  • Kenmore 110.6707 - page 15

    Determine vent path • Select the route that will provide the straightest and most direct path outdoors. • Plan the installation to use the fewest number of elbows and turns. • When using elbows or making turns, allow as much room as possible. • Bend vent gradually to avoid kinking. • Use the fewest 90 ° turns possible. Determine vent len ...

  • Kenmore 110.6707 - page 16

    Check the levelness of the dryer. Check levelness first side to side, then front to back. If the dryer is not level, prop up the dryer using a wood block. Use a wrench to adjust the legs up or down and check again for levelness. You can change your door swing from a right-side opening to a left-side opening, if desired. 1. Place a towel or soft clo ...

  • Kenmore 110.6707 - page 17

    3. Remove the 4 screws from the opposite side of the door. I ,.-1 Install the 2 hinges to the front panel of the dryer using 4 screws. Use the non-slotted side to attach the hinge to the front panel. Install screws in the top hinge holes in the door. Do not tighten screws. Leave approximately W' (5 mm) of screw exposed. A. Install these screws ...

  • Kenmore 110.6707 - page 18

    DRYER USE STATUS _mp C®l Down v_/rin_l_ Guarg CheeklintScr_n_ MODIFIERS ;gh 0 L_w b _mal E×_ Low Dryness TernDe_ature OPTIONS Drum Light Wrinkle Guard 90 [ovd So_ Dy¢le Signal Volume Explosion Hazard Keep flammable materials and vapors, such as gasoline, away from dryer. Do not dry anything that has ever had anything flammable on it (even after ...

  • Kenmore 110.6707 - page 19

    5= 6. Adjust Dryness Level. NOTE: Dryness Level selections can be made only while using Auto Dry Cycles. Mof_ Nomal L_SS To Dryness Level Auto Dry Cycles take the guesswork out of drying time and enhance fabric care. The amount of time that is displayed is the estimated time remaining in the cycle. use a Timed Cycle Select a Timed Cycle. Press the ...

  • Kenmore 110.6707 - page 20

    Follow the progress of your dryer with the drying Status indicator lights. STATUS Damp Cool Down Clothes Dry Wrinkle Guard Check Lint Scleen Damp The Damp light illuminates in an Auto Dry Cycle when the laundry is approximately 80% dry or suitable for ironing. Damp Dry Signal beeps, if selected. See "Options." Cool Down The Cool Down ligh ...

  • Kenmore 110.6707 - page 21

    Auto Preset Cycle Settings Follow care label directions. Auto Dry Cycles Temperature Time* Load Type (Minutes) HEAVY DUTY High 50 Heavyweight mixed loads, cottons, jeans COTTON/TOWELS High 45 Towels, sheets, cottons NORMAL Medium 40 Corduroys, work clothes CASUAL Low 35 Business casual clothes, permanent press, synthetics ULTRA DELICATE/ Extra-Low ...

  • Kenmore 110.6707 - page 22

    Air Dry Use the Air Dry Modifier for items that require drying without heat such as rubber, plastic and heat-sensitive fabrics. This table shows examples of items that can be dried using Air Dry. Type of Load Time* (Minutes) Foam rubber - pillows, padded bras, stuffed toys 20 - 30 Plastic - Shower curtains, tablecloths 20 - 30 Rubber-backed rugs 40 ...

  • Kenmore 110.6707 - page 23

    Changing the Preset Dryness Level Settings If all your loads on all Auto Dry cycles are consistently not as dry as you would like, you may change the preset Dryness Level settings to increase the dryness, This change will affect all of your Auto Dry cycles. Your Dryness Level settings can be adjusted to adapt to different installations, environment ...

  • Kenmore 110.6707 - page 24

    DRYER CARE Oe !_n nc tke D/_,eu oc_sl o_ _} Keep dryer area clear and free from items that would obstruct the flow of combustion and ventilation air. Explosion Hazard Keep flammable materials and vapors, such as gasoline, away from dryer. Place dryer at least 18 inches (46 cm) above the floor for a garage installation. Failure to do so can result i ...

  • Kenmore 110.6707 - page 25

    From Inside the Dryer Cabinet Lint should be removed every 2 years, or more often, depending on dryer usage, Cleaning should be done by a qualified person. From the Exhaust Vent Lint should be removed every 2 years, or more often, depending on dryer usage. Vacation care Operate your dryer only when you are at home. If you will be on vacation or not ...

  • Kenmore 110.6707 - page 26

    TROUBLESHOOTING First try the solutions suggested here and possibly avoid the cost of a service call... Dryer will not run Has a household fuse blown, or has a circuit breaker tripped? Replace the fuse or reset the circuit breaker. There may be 2 household fuses or circuit breakers for the electric dryer. Check that both fuses are intact and tight, ...

  • Kenmore 110.6707 - page 27

    Are fabric softener sheets blocking the grille? Use only one fabric softener sheet, and use it only once. Is the exhaust vent the correct length? Check that the exhaust vent is not too long or has too many turns. Long venting will increase drying times. See "Installation Instructions." Is the exhaust vent diameter the correct size? Use 4& ...

  • Kenmore 110.6707 - page 28

    iNDICE CONTRATOS DE PROTECCION ................................................ 28 GARANTIA .................................................................................... 29 SEGURIDAD DE LA SECADORA ............................................... 30 INSTRUCCIONES DE INSTALACION ........................................ 31 Herramientas y piezas ...

  • Kenmore 110.6707 - page 29

    GARANTJA DE LOS ELECTRODOMI STICOS KENMORE ELITE GARANTIA LIMITADA DE UN AI_IO Cuando este electrodomestico haya sido instalado, operado y mantenido segQn las instrucciones provistas con el producto, si este electrodomestico falla per defectos de material o de mano de obra dentro de un a_o a partir de la fecha de compra, Ilame al 1-800-4-MY-HOME ® ...

  • Kenmore 110.6707 - page 30

    SEGURIDAD DE LA SECADORA Su seguridad y la seguridad de los demas es muy importante. Hemos incluido muchos mensajes importantes de seguridad en este manual y en su electrodomestico. Lea y obedezca siempre todos los mensajes de seguridad. Este es el s/mbolo de advertencia de seguridad. Este sfmbolo le llama la atenci6n sobre peligros potenciales que ...

  • Kenmore 110.6707 - page 31

    INSTRUCCIONES DE INSTALACION ReQna las herramientas y piezas necesarias antes de comenzar la instalaci6n. Lea y siga las instrucciones provistas con cualquiera de las herramientas enlistadas aqui. • Destornilladordecuchilla • Tijeras de lata plana (instalaciones del nuevo ducto de escape) • Destomillador Phillips # 2 • Llave detuercas • N ...

  • Kenmore 110.6707 - page 32

    Espacios de instalacibn La ubicaci6n debe ser Io suficientemente grande para poder abrir completamente la puerta de la secadora. Dimensiones de la secadora *La mayor[a de las instalaciones requieren un espacio m[nimo de 5" (12,7 cm) detras de la secadora para acomodar el ducto de escape con codo. Vea "Requisitos de ventilacidn'. Espa ...

  • Kenmore 110.6707 - page 33

    Conexibn el_ctrica Para instalar su secadora adecuadamente, usted debe determinar el tipo de conexidn electrica que va a usar y seguir las instrucciones que aquf se proveen para el caso. [] Si los cddigos locales no permiten la conexi6n de un conductor para conexi6n a tierra del equipo al alambre neutro, vea la secci6n "Conexidn opcional de 3 ...

  • Kenmore 110.6707 - page 34

    Cable de suministro el_ctrico Cable directo Peligre de Incendio Use un cable de suministro electrico nuevo de 30 amperes que este en la lista de UL. Use un protector de cables que este en la lista de UL. Desconecte el suministre el_ctrico antes de hacer las cone×Jones electricaso Cenecte el alambre neutro (el blanco e el del centre) al terminal ce ...

  • Kenmore 110.6707 - page 35

    Haga pasar el cable de suministro de energia a traves del protector de cables. Aseg_rese de que el aislamiento de cables del cable de suministro de energia este dentro del protector de cables. El protector de cables debera encajar bien con el gabinete de la secadora y estar en posici6n horizontal. No ajuste mas los tornillos del protector de cables ...

  • Kenmore 110.6707 - page 36

    1. 4. Conecte los otros hilos a los tomillos exteriores del bloque de 2. terminal. Apriete los tomillos. A 3= Saque el tornillo central del bloque de terminal. Saque el hilo de tierra neutro del aparato del tornillo conductor de tierra externo. Conecte el hilo neutro de puesta a tierra y el hilo neutro (hilo blanco o central) del cable de suministr ...

  • Kenmore 110.6707 - page 37

    Saque el hilo de tierra neutro del tornillo conductor de tierra externo. Conecte el hilo neutro de puesta a tierra y coloque el extremo en forma de gancho (gancho mirando hacia la derecha) del hilo neutro (blanco o central) del cable de conexi6n directa debajo del tornillo central del bloque de terminal. Apriete y junte los extremos en forma de gan ...

  • Kenmore 110.6707 - page 38

    3. Conecte los otros hilos a los tornillos exteriores del bloque de terminal. Apriete los tornillos. 4. Apriete los tornillos del protector de cables. 5. Introduzca la lengOeta de la cubierta del bloque de terminal en la ranura del panel posterior de la secadora. Asegure la cubierta con el tornillo de sujeci6n. 6. Usted ha completado la conexi6n el ...

  • Kenmore 110.6707 - page 39

    Conexibn opcional de 3 hilos Use para cable directo o cable de suministro el_ctrico donde los cbdigos locales no permitan la conexibn del conductor de tierra del gabinete con el hilo neutro. 1. Saque el tornillo central de color plateado del bloque de terminal. 2. Saque el hilo de tierra neutro del tornillo conductor de tierra externo. Conecte el h ...

  • Kenmore 110.6707 - page 40

    Ducto de escape de metal rigido • Para un 6ptimo rendimiento de secado, se recomiendan ductos de escape de metal rfgide. • Se recomienda el ducto de escape de metal rfgido para evitar que se aplaste o se tuerza. Ducto de escape de metal flexible • Los ductos de escape de metal flexible son aceptables Qnicamente si se puede acceder a los mismo ...

  • Kenmore 110.6707 - page 41

    Instalaciones opcionales de escape Los sistemas de ventilacidn vienen en una amplia gama. Seleccione el tipo mas apropiado para su instalacidn. Peligro de Incendio Cubra el orificio de escape no usade con el juege siguiente: 8212503 Comuniquese con su distribuidor local. No seguir estas instrucciones puede ecasionar la muerte, incendio, cheque elec ...

  • Kenmore 110.6707 - page 42

    No. de Tipo de Capotas de Capotas vueltas ducto ventilaci6n de angulares de 90 ° caja o tipo o persiana codes 0 Metal rigido 64 pies (20 m) 58 pies (17,7 m) Metal flexible 36 pies (11 m) 28 pies (8,5 m) 1 Metal rigido 54 pies (16,5 m) 48 pies (14,6 m) Metal flexible 31 pies (9,4 m) 23 pies (7 m) 2 Metal rigido 44 pies (13,4 m) 38 pies (11,6 m) Met ...

  • Kenmore 110.6707 - page 43

    3. Afloje el tornillo superior de cada una de las 2 bisagras en el 2. Quite el tornillo de adorno del lado opuesto del tope de la paso 2. puerta. A A B .A B A. Afloje estos tornillos. B. Saque estos tornil/os. 4. Quite la puerta de la secadora y las bisagras levantando la puerta. Coloque ia puerta sobre una superficie plana y protegida con la parte ...

  • Kenmore 110.6707 - page 44

    4. Instale las 2 bisagras en el panel frontal de la secadora usando 4 tornillos. Utilice el lado sin ranuras para ajustar la bisagra al panel frontal. 5. Coloque los tornillos en los orificios superiores en ambas bisagras en la puerta. No apriete los tornillos. Deje aproximadamente 1A" (5 mm) de tornillo expuesto. 6= A. Instale estos tornillos ...

  • Kenmore 110.6707 - page 45

    USO DE LA SECADORA f STATUS MODIFIERS OPTIONS b_m_ Drum Ugbt High Damp Dry SJg_lal Morn Wrl kle G_a_d LOW _""_'_ Wrinkle Guard 90 Nor _'al Ex[r_ Lo,v _ss Air Ory Dryness Tempersture Cycle Signal Volume Peiigro de Explosion Mantenga los materiales y vapores inflamablee, tales como la gasolina, alejados de la eecadora. No seque ni ...

  • Kenmore 110.6707 - page 46

    • Seleccione Nivel de secado (DRYNESS LEVEL) para regular el nivel de sequedad que usted desea para su ropa. A medida que avanza el ciclo, el control detecta el nivel de sequedad de la carga y regula automaticamente el tiempo seg0n el nivel de sequedad seleccionado. El ajuste de sequedad prefijado es Normal cuando se selecciona un ciclo de secado ...

  • Kenmore 110.6707 - page 47

    Sugerencias de ciclos • Sequela mayorfa de las cargas usando los ajustes prefijados de ciclos. • Consulte el cuadro de Ajustes prefijados automaticos o programados (en la secci6n "Ciclos") a fin de obtener una guia para el secado de diversas cargas de ropa. • La temperatura de secado y el nivel de secado automatico estan prefijados ...

  • Kenmore 110.6707 - page 48

    Ajustes prefijados de ciclos automaticos Siga las instrucciones de cuidado de la etiqueta. Ciclos de secado Temperatura Tiempo* automatico (Minutos) Tipo de carga Secado intenso Alta 50 (HEAVY DUTY) Cargas pesadas mixtas, algod6n y pantalones de mezclilla Algod6n/toallas (COTTON/TOWELS) Toallas, sabanas, prendas de algod6n Alta 45 NORMAL Ropa de pa ...

  • Kenmore 110.6707 - page 49

    Modiflcadores del ciclode secado autom&tico Use el modificador de nivel de sequedad para (Dryness Level) seleccionar los niveles de sequedad para los ciclos de secado automatico (Auto Dry Cycles). Presione el nivel de sequedad hasta que se ilumine el ajuste deseado de nivel de sequedad. El ajuste de sequedad prefijado es Normal cuando se selecc ...

  • Kenmore 110.6707 - page 50

    La sepal de semi seco (DAMP DRY SIGNAL) es Otil cuando seca sabanas/artfculos de line en una carga mixta. Cuando suene la sedal, abra la puerta para detener la secadora, vuelva a arreglar la carga dentro de la secadora, cierre la puerta y vuelva a poner la secadora en marcha para terminar el ciclo de secado. El volver a arreglar la carga, ayudara e ...

  • Kenmore 110.6707 - page 51

    El estante de la secadora fue embalado dentro del tambor de la seoadora. Use el estante de la secadora para articulos que usted no quiere seoar con rotaoi6n, come son sueters. Use el Secado programado (Timed Dry) para seleccionar la duraci6n deseada. NOTA: No use ciclos de secado automatico con el estante de secado. Para usar el estante de la seead ...

  • Kenmore 110.6707 - page 52

    CUIDADO DE LA SECADORA Mantenga el Area donde esta la secadora despejada y libre de articulos que pudieran obstruir el flujo de aire para la combusti6n y la ventilaci6n. Peligro de Explosi6n Mantenga los materiales y vapores inflamables, como la gasolina, lejoe de la secadora, Coloque la eecadora a un mfnimo de 46 cm sobre el pieo para la inetalaci ...

  • Kenmore 110.6707 - page 53

    En el interior del gabinete de la secadora SegQn el uso de la secadora, se debe quitar la pelusa cada 2 ar3os, o con mas frecuencia, La limpieza debera efectuarla una persona calificada. En el ducto de escape La pelusa debe ser quitada cada 2 a_os, o con mas frecuencia, de acuerdo con el use de la secadora. Cuidado para las vacaciones Ponga la seca ...

  • Kenmore 110.6707 - page 54

    SOLUCION DE PROBLEMAS Pruebe primero las soluciones aqui sugeridas y posiblemente se evite el costo de una visita de servicio t_cnico... • "AF" (la secadora esta experimentando un problema de La secadora no funciona &Hay un fusible de la casa fundido o se dispar6 el cortacircuitos? Reemplace el fusible o reposicione el cortacircuito ...

  • Kenmore 110.6707 - page 55

    El tiempo del ciclo es demasiado corto &Tiene el ducto de escape el largo correcto? Controle el ducto de escape para verificar que no sea demasiado largo o no de demasiadas vueltas. Una ventilaci6n larga aumentara el tiempo de secado. Vea "lnstrucciones de instalacidn". &Es el diametro del ducto de escape del tamaSo correcto? Use ...

  • Kenmore 110.6707 - page 56

    Your Home For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door o ...

Manufacturer Kenmore Category Clothes Dryer

Documents that we receive from a manufacturer of a Kenmore 110.6707 can be divided into several groups. They are, among others:
- Kenmore technical drawings
- 110.6707 manuals
- Kenmore product data sheets
- information booklets
- or energy labels Kenmore 110.6707
All of them are important, but the most important information from the point of view of use of the device are in the user manual Kenmore 110.6707.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Kenmore 110.6707, service manual, brief instructions and user manuals Kenmore 110.6707. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Kenmore 110.6707.

Similar manuals

A complete manual for the device Kenmore 110.6707, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Kenmore 110.6707 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Kenmore 110.6707.

A complete Kenmore manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Kenmore 110.6707 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Kenmore 110.6707, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Kenmore 110.6707, that we can find in the current document
3. Tips how to use the basic functions of the device Kenmore 110.6707 - which should help us in our first steps of using Kenmore 110.6707
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Kenmore 110.6707
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Kenmore 110.6707 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Kenmore 110.6707?

Use the form below

If you did not solve your problem by using a manual Kenmore 110.6707, ask a question using the form below. If a user had a similar problem with Kenmore 110.6707 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)