English dropdown-ico

Manual Fujitsu CELSIUS W530

64 pages Not applicable
Download

Go to site of 64

Summary
  • Fujitsu CELSIUS W530 - page 1

    System Operating Manual CELSIUS W530 / W530power ...

  • Fujitsu CELSIUS W530 - page 2

    Thank you for buying an inno vative product from Fujitsu. Latest information abo ut our products, useful tips, upda tes etc. is available on our website: " http: //www .fujitsu .com/fts/ " Yo u c a n fi nd driver upda tes at: " http://su pport.ts .fujitsu.c om/dow nload" Should you have any te chnical questions, please contact: ...

  • Fujitsu CELSIUS W530 - page 3

    ...

  • Fujitsu CELSIUS W530 - page 4

    Published by / Contact address in the EU Fujitsu T e chnology Solutions GmbH Mies-van -der-Rohe -Straße 8 80807 Munich, Germany " http:// www.fujitsu.com/fts/" Copyright ©F u j i t s u T echnolo gy Solution s GmbH 2013 . All rights reserved. Publication Date 06/2013 Order No.: A26361-K1445-Z320- 1-7619, edition 1 ...

  • Fujitsu CELSIUS W530 - page 5

    CELSIUS W530 / W530power Operating Manual Y our CELSI US... 5 Ports and operating elements 7 Important note s 9 Getting started 13 Operation 23 T roubleshooting and tips 30 System expansions 34 T echnical data 57 Index 58 ...

  • Fujitsu CELSIUS W530 - page 6

    Remarks Information on the product d e scription meets the design speci fi cations of Fujitsu and is provided for comparison purposes. Sever al factors may cause the actua l results to differ . T echnical data is subject to change without prior noti fi ca tion. Fujitsu rejects any responsibility with r egard to technical or editorial mistakes or ...

  • Fujitsu CELSIUS W530 - page 7

    Content s Contents Y o u r C E L S I U S . . . ................ ............... ............... ................... ...... 5 V a l i d i t y o f t h e R e f e r e n c e M a n u a l ................................ ............... .......... 5 Notational conventions ............... ............... ................... ............... .. 6 Ports a nd ...

  • Fujitsu CELSIUS W530 - page 8

    Contents P o w e r - o n i n d i c a t o r r e m a i n s u n l i t a f t e r y o u h a v e s w i t c h e d o n y o u r d e v i c e ................. 3 0 The device c anno t be switched off with the ON/OFF switch . . . .......................... 3 1 M o n i t o r r e m a i n s b l a n k ....... ................... ............... ............... ... ...

  • Fujitsu CELSIUS W530 - page 9

    Y our CELSIUS... Y our CELSIUS... Overview ... is available with various con fi guration levels which differ in terms of hardware and software equipment. Y ou can install accessible drives (e.g. DVD drives) and other modules. This manual tells yo u how to start using your device and how to operate it in daily u se. This manual applies for a ll c o ...

  • Fujitsu CELSIUS W530 - page 10

    Y our CELSIUS... Notational conventions Pay particular attention to text marked with this symbol. Fa ilure to observe these warnings could p ose a risk to health, damage the device or lead to loss of data. The warranty will be invalidated if the device becomes defective throu gh failure to observe these warnings. Indicates important informa tion fo ...

  • Fujitsu CELSIUS W530 - page 11

    Ports a nd operating elem en ts Ports and operating elements Ports This chapter presents the individual hardw are components of your device. This will provide you with an overview of the ports and operating elements on the device. Please familiarise yourself with t hese components before starting to work with your device. Front 1 2 3 4 5 6 7 9 8 1 ...

  • Fujitsu CELSIUS W530 - page 12

    Ports and operating elements Rear 1 2 3 1= A l t e r n a t i n g v oltage socket (AC IN) 2 = Ports for external devices (device-dependent) 3 = Slot covers 8 Fujitsu ...

  • Fujitsu CELSIUS W530 - page 13

    Important notes Important notes Impor tantnot es Notes In this chapter you will fi nd information regarding safety which it is essential to take note of when working with your device. Safety information Safetyinformation Note Please note the informat ion provided in the "Safety/regulations" manual and in th e following safe ty notes. Whe ...

  • Fujitsu CELSIUS W530 - page 14

    Important notes Cleaning the device Device, Tran sporta tion Retransportati on Systemunit,see Device T urn off all power and equipment switches and disconnect the pow er plug from the mains outlet. Do not clean any interior pa rts yourself, leave this job to a service technician. Do not use any cleaning agents that contain abrasives or may corrod e ...

  • Fujitsu CELSIUS W530 - page 15

    Important notes CE marking CEmarking CEmarking Notes Electrom agneti ccompat ibili ty Lowvoltagedi rective The shipped version of this device complies with the requirements of European U nion directives 2004/108/EC "Electromagnetic compatibility", 2006/95/EC "Low voltage directive" and 2009/125/EC "Ecodesign". CE marki ...

  • Fujitsu CELSIUS W530 - page 16

    Important notes FCC Compliance Statement If th e device complies with the FCC regulations, the FCC sign can be found on the type rating plate. FCC Class B Compliance State ment DOC ( INDU STRY CANA DA) NOTICES Notice to Users of Rad ios and T elevision: This class B digital a pparat us complies with Canadian I CES-003. The following statement appli ...

  • Fujitsu CELSIUS W530 - page 17

    Getting started Getting started Gettingstarted Please observe the safety information in the "Impo rtant notes", Page 9 chapter . Unpacking and checking the delivery It is recommend ed not to throw away the original packaging material! It may be required for reshipment at some later date. Packaging Contentsofd elivery Packaging, ► Unpack ...

  • Fujitsu CELSIUS W530 - page 18

    Getting started Setting up the device Workstation Ergonomic Device When installing your device, please read the recommendations and safety notes in the "Safety/regu lations" manual. We recommend that you place your device on a surface which is not slippery . In view of the man y different fi nishes and varnishes used on furniture, it is ...

  • Fujitsu CELSIUS W530 - page 19

    Getting started Connecting external devices Read the documentation on the external device before connecting it. With the exception of USB devices, always remove all power plugs before con necting external devices! Do not connect or disconnect cables d uring a thunderstorm. Always take hold of the actual plug when discon nect ing a cable . Never pul ...

  • Fujitsu CELSIUS W530 - page 20

    Getting started Ports on the device Ports E xterna ldevices Device The ports are located on the front and back of the device. Not all ports are necessarily present on your device. The standard ports are marked with t he symbols shown below (or similar). Detailed information on the location of the ports is provided in the manual for the mainboard. P ...

  • Fujitsu CELSIUS W530 - page 21

    Getting started Connecting a monitor In the facto ry setting s, the system is con fi gured so that an available PCI display adapter is provided for screen output during initial setup. This is also the case if there is an internal displa y adapter . As soon as a PCI display adapter is plugged in or if the CPU has no graphics core, all onboard displ ...

  • Fujitsu CELSIUS W530 - page 22

    Getting started If an additional display adapter other than the C PU display ada pter is plugged into the system, only one additional monitor is provided for display on the onboard display adapter . The two others act as ServicePorts and are not intended for simultaneous image playb ack. The DisplayPort is the preferred port. Ther efore, the cover ...

  • Fujitsu CELSIUS W530 - page 23

    Getting started Connecting the keyboard Y ou can connect a USB keyboard or a PS/2 keyboard to your device. Keyboard, Connecti ng, Connecting a USB keyboard Use the supplied keyboard cable only . USBport, Connec ting, ► Plug the rectangular connector of the keyboard cable into the rectangular socket on the underside or on the rear of the keyboard. ...

  • Fujitsu CELSIUS W530 - page 24

    Getting started Connecting external devices to the parallel (optional) or serial port Parall elpor t Serialport Parallelpo rt Serialport Externa ldevices Devices External devices can be c onnected to the parallel or serial port (e.g. a printer or a modem). ► Connect the data cable to the external device. ► Depending on the device, conn ect the ...

  • Fujitsu CELSIUS W530 - page 25

    Getting started S w i t c h i n go nf o rt h e fi rst time: installing the software Installing, Software, Installing, Once the installation ha s bee n started the device m ust not be switched off, unless the installation has been completed. During installation, the device may only be rebooted when you are requested to do so! The installation will ...

  • Fujitsu CELSIUS W530 - page 26

    Getting started Switchin g on monit or and device Device, Monitor, In order to avoid overheating, do not cover the ventilation areas of the monitor or the device. ► Switch the monitor on (see the operating man ual for the monitor). ► Switch the device on. T o do this, follow the instructions below. Switching on the device ► Press the ON/ OFF ...

  • Fujitsu CELSIUS W530 - page 27

    Operation Operation Indicators on the device 1 2 3 No. indicator Description 1 Drive indicators The indicator lights u p when the CD-R OM or DVD drive of the device is accessed. Y ou must never under any circumstances remove the CD/DVD while the i ndic a tor is l it . 2 Power-on indicator • The indicator is illuminated: The device is switched on. ...

  • Fujitsu CELSIUS W530 - page 28

    Operation Switching off the device ► Shut dow n the operating syste m in a de fi ned manner. In Windows: via the Start menu and the T urn Off Computer function. Device, Monitor, or ► Brie fl y press the ON/OFF switch. ► If the operating system does not automatically switch the device into energy-saving mode or switch it off, press the ON/OF ...

  • Fujitsu CELSIUS W530 - page 29

    Operation Important keys and keyboard shortcuts Keys Keyb oardshortcu ts The description of th e following keys and keyboard shortcuts applies to Microsoft operating systems. Deta ils of o ther keys and keyboard shortcuts can be found in the documentation for the r elevant application program. Key / key combination Description ON/OFFswitch Button, ...

  • Fujitsu CELSIUS W530 - page 30

    Operation Key / key co mbination Description Keys, Num Lo ck key By pressing the N um Lock key you switch between the upper- and lower-case levels of the calcu lator k eyp ad. When the Num Lock indicator is lit the numeric keypad and arithmetic keys are active. When the Num Lock indicato r is n ot lit the cursor control functions on the Numeric key ...

  • Fujitsu CELSIUS W530 - page 31

    Operation Property and data prot ection Propertyprotectio n Dataprot ection Securitym easures Software functions and mechanica l locking offer a broad range of functions for protecting your device and your personal data from unauthorised access. Y ou can also combine these functions. Anti-theft protection a nd lead-sealing Device, Device , Casing, ...

  • Fujitsu CELSIUS W530 - page 32

    Operation Mechanical casing lock (optional) Casingmechanicallock Casing Loc k Casinglock With the casing lock you can mechanically loc k the casing to prohibit una uthorised persons from o pening it. The keys can be found on the rear panel of your device. If you use a casing with a casing lock, the safety guard in front of the drives is also secure ...

  • Fujitsu CELSIUS W530 - page 33

    Operation Access authorisation via SmartCard Securityfunctions, Accesspermission,SmartCard In systems equipped with a SmartCard reader , access can be restricted to those users who have a corresponding SmartCard. Operating the SmartCard reader (optional) Operation of this module i s not permitted in T aiwan. ► Connect the external SmartCard reade ...

  • Fujitsu CELSIUS W530 - page 34

    T roubleshootin g and tips T roubleshooting and tips Refer to the safety notes in the "Safety/regulations" manual and in th e "Gett ing started ", Pa ge 13 chapter when co nnecting or disconnecting cables. If a fault oc c u rs , try to c orrect it as described in the following documentation: • in this chapter • in the docume ...

  • Fujitsu CELSIUS W530 - page 35

    T ro ubleshooting and tips The device cannot be switched off with the ON/OFF switch Cause Remedy System crash ► Keep the on/off switch pressed for at least 4 seconds until the machine switches off. Caution: This can lead to a loss of data! This procedure does not allow the operating system to shut down in an orderly way . The next time the system ...

  • Fujitsu CELSIUS W530 - page 36

    T roubleshootin g and tips No mouse pointer displayed o n the screen Cause Remedy The mouse is not correctly conn ecte d. ► Shut down the operating system properly . ► Switch the de vice off. ► Check that the mouse cable is properly connected to the system unit. If you use a n adapter or extension lead with the mouse cable, ch eck the connect ...

  • Fujitsu CELSIUS W530 - page 37

    T ro ubleshooting and tips Restoring the hard disk content s Y ou will fi n d the inst ructions for restoring the contents of the hard disk in t he "Recovery Guide" manual. Tip s To p i c T i p Lack of system resources ► Close unnecessary applications. or ► Run the applications in a different order . Other manuals Further manuals are ...

  • Fujitsu CELSIUS W530 - page 38

    System expansions System expansions Upgrades, Device, System expansion Components Servicing Repairs to the device must only be performed by quali fi ed technicians. Incorrect repairs may grea tly endanger the user ( electric shock, fi re risk) and will inva lidate your w arra nty . After consulting the Hotline/Help Desk, you may remove and instal ...

  • Fujitsu CELSIUS W530 - page 39

    System expansio ns Information about boards T ake care with the locking mechanisms (catches and centring pins) when you are replacing boards or components on boards. Note that some components on the mainboard m ay be very hot if the device was in use shortly before the casing was remo ved. T o prevent damage to th e board or the components and cond ...

  • Fujitsu CELSIUS W530 - page 40

    System expansions Opening the casing Casing, Device, ► Switch the de vice off. The d evice must not be in power-saving mode. Please obse rve the safety information in "Impo rtant notes ", Pa ge 9 . Disconnect the mains plug from the mains outlet. Only insert the power plug after you have closed the casing. ► Remove any connected wir e ...

  • Fujitsu CELSIUS W530 - page 41

    System expansio ns Closing the casing ► Insert the side part in the guide rail on the lower part of the casing. Casing, Device, 1 ► Swivel the side cover in the direction of th e arrow (1) until it engages. ► On devices with a casing lock: Lock the casing. ► Reconnect the cables that you disconnected before. Overview of drive bays and drive ...

  • Fujitsu CELSIUS W530 - page 42

    System expansions Installing and removing the accessible 5 1 / 4 inch drive The following chap ter illustrates the standard version and not the power version. However , the procedure in the following chapters is the same for both versions. Fitting the drive cover for the 5 1 / 4 inch drive T o use the latch function of the accessible 5 1 / 4 inch d ...

  • Fujitsu CELSIUS W530 - page 43

    System expansio ns Installing an accessible drive ► Open the casing (see "Openin g the casing" , Pag e 36 ). ► If you are installing th e drive in the upper bay and a cover (optional) is already in place, please remove it. or ► If you are installing the drive in the lower bay and a cover (optional) is already in place , please remov ...

  • Fujitsu CELSIUS W530 - page 44

    System expansions Removing an access ible drive ► Open the casing (see "Ope ning th e casi ng", P age 36 ). 1 2 ► Disconnect the cables connected to the drive . ► Slide the clip in the direction of the arrow (1). ► Pull the drive out of the casing in the direction of the arrow (2). 1 ► Remove the drive cover from the drive (1). ...

  • Fujitsu CELSIUS W530 - page 45

    System expansio ns It may be necessary t o mo dify the entry for the drive in the BIOS Se tup . Installing/removing the Sma rtCard reader and/or WLAN module (optional, 3½-Zoll) Y ou can also install a Smar tCard reader and/or a WLAN module for wireless LAN (Local Area Network) or a memory card reader in the drive bays for 3½ inch drives (see &quo ...

  • Fujitsu CELSIUS W530 - page 46

    System expansions Removing the module ho lder ► Open the casing (see "Ope ning th e casi ng", P age 36 ). ► Disconnect the cables conne cted to the module holder . 1 1 2 ► Remove the screws (1) on the module holder. ► Push the module holder out of the c asing in the direction of the arro w (2). Screwing the WLAN module onto the mo ...

  • Fujitsu CELSIUS W530 - page 47

    System expansio ns Screwing the SmartCard reader onto the mo dule holder 2 2 a a 1 ► Push the SmartCard reader - with the component side facing downwards - into the guide o n the module holder (a) in the directio n of the arrow (1). ► Secure the SmartCard reader with the screws (2). Installing the module holder with SmartCard reader and/or WLAN ...

  • Fujitsu CELSIUS W530 - page 48

    System expansions Removing the module holder with SmartCard reader and/or WLAN module ► Open the casing (see "Ope ning th e casi ng", P age 36 ). ► Disconnect the cables conne c ted to the modu le holder . 1 1 2 ► Remove the screws (1). ► Push the module holder out of the c asing in the direction of the arro w (2). ► Remove the ...

  • Fujitsu CELSIUS W530 - page 49

    System expansio ns Removing the S martCard reader from the module holder 1 1 ► Undo the screws (1). ► Pull the SmartCard reader out of the module holder in the direction of the arrow (2). Removing the WLAN module from the module holder 2 a a 1 2 ► Undo the screws (1) . ► Pull the WLAN module out of the module holder in the direction of the ...

  • Fujitsu CELSIUS W530 - page 50

    System expansions Removing and installing the mem ory card reader (optional, 3½ inch, MultiCard) Y ou can also install a memo ry ca rd reader or a SmartCard reader and/or a WLAN module for wireless LAN (Local Area Netw ork) in the d rive bay for 3½ inch drives (see " Install in g/remov ing the SmartC ard reade r a n d/or W LAN modu le (optio ...

  • Fujitsu CELSIUS W530 - page 51

    System expansio ns Removing the memory card reader ► Open the casing (see "Openin g the casing" , Pag e 36 ). ► Disconnect the cables connected to the m emory card reade r. 1 1 2 ► Remove the screws (1). ► Slide the memory card reader out of the casing in the direction of the arrow (2). ► Install a blind c over in the drive bay ...

  • Fujitsu CELSIUS W530 - page 52

    System expansions Installing and removing the har dd i s kd r i v e The following d escription applies both to 3 1 / 2 inch drives and to 2 1 / 2 inch drives . The insta llation and removal p rocedure is the same for bo th types. Yo u c a n fi nd EasyChange rails for a second 3 1 / 2 inch hard disk drive on the drive cage. EasyChange rails for a s ...

  • Fujitsu CELSIUS W530 - page 53

    System expansio ns Installing a hard disk drive ► Open the casing (see "Openin g the casing" , Pag e 36 ). ► Secure the E asyChange rails to the side of the hard disk drive by inserting the upper pins of the EasyChange rail in the corresponding holes o f the hard d isk. 1 ► Slide the hard disk drive with the EasyChange rails into th ...

  • Fujitsu CELSIUS W530 - page 54

    System expansions Removing the hard disk drive ► Open the casing (see "Ope ning th e casi ng", P age 36 ). 1 1 2 ► Slightly press together the EasyChange rails moun ted on the hard disk drive (1) and carefully pull the hard disk drive slightly out of the drive cage in the direction of the arrow (2). ► Disconnect the cab les connecte ...

  • Fujitsu CELSIUS W530 - page 55

    System expansio ns Installing and removing a board Y ou can install additional modules in order to increase the performance of your machine. The number , position and arrangement of the board slots on the mainboard can be found in the manua l for the mainboard. Board s may already be installed on shipment. The following ch apter illustrates the sta ...

  • Fujitsu CELSIUS W530 - page 56

    System expansions Do not throw away the slot co ver. For cooling, protection against fi re and in order to comply with EMC regulations, you must re fi t the slot cover if you remove the board. 2 1 ► Push the board into the slot (1). ► Swivel the retaining clamp back again until you feel it click into place (2). ► Connect the cables to the b ...

  • Fujitsu CELSIUS W530 - page 57

    System expansio ns Removing a board ► Open the casing (see "Openin g the casing" , Pag e 36 ). Board ► Disconnect the cables connected to the board. 1 2 ► Push the retaining clip (1) towards the slot cover to u nlock it, then move it tow ards back panel of the device. ► Pull the board o ut of the slot in the direction of the arrow ...

  • Fujitsu CELSIUS W530 - page 58

    System expansions ► Press on the retaining c lip until it you feel it engage (2). ► Close the casing (see " Closing the c asing" , Page 37 ). If you have installed o r removed a PCI board, please check the relevant PCI slot settings in the BIOS Setup . If necessary , cha nge the settings. Further information is provided in the PCI boa ...

  • Fujitsu CELSIUS W530 - page 59

    System expansio ns Mainboard expansions Details on how to upgrade the m ain memory or the processor of your device can be found in the m anual for the mainboard. Upgrades Lithiumb attery Proces sor Mainmemory Mainboard Upgrading m ain memory ► Open the casing (see "Openin g the casing" , Pag e 36 ). Mainmemory ► Upgrade the main memor ...

  • Fujitsu CELSIUS W530 - page 60

    System expansions Replacing the lithium battery In order to permanently sa ve the system informa tion , a lithium battery is installed to provid e the CMOS-memory with a current. A corresponding error message noti fi es the u ser when the charge is too low o r the battery is em pty . T he lithium battery must then be replaced. Incorrect replacemen ...

  • Fujitsu CELSIUS W530 - page 61

    T echnical data T echnical data Electrical data Safety standards complied w ith: IEC 60950-1, EN 60950-1, UL 6 0950 CSA 22.2 No.60950-1 Protection class: I Rated voltage range 100 V – 240 V Rated frequency 50 Hz – 60 Hz Max. rated current 3.5 A - 1.5 A Dimensi ons Width x Depth x Height: 175 mm x 419 mm x 395 mm / 6.89 inch x 16.5 inch x 15.55 ...

  • Fujitsu CELSIUS W530 - page 62

    Index Index A Access permission, SmartCard 29 Alphanumeric keypad 24 Anti-theft protection 27 Audio input 16 Audio output 16 B Battery 56 BIOS Setup 26 security functions 28 BIOS Setup, con fi guration 26 settings 26 system settings 26 Board installing 51 removing 53 Board, installing 51 removing 51 Button, ON/OFF switch 25 C Cable connecting 15 d ...

  • Fujitsu CELSIUS W530 - page 63

    Index I Important not es 9 Installing, software 21–22 switching on for the fi rs t time 21 K Keyboard 24 Keyboard port 16 keyboard shortcuts 26 Keyboard shortcuts 25 Keyboard, alphanumeric keypad 24 connecting 19 cursor keys 24 function ke ys 24 numeric keypad 24 port 19 Keys 25 Ctrl 26 Ctrl+Alt+Del 26 Menu key 25 Keys, Alt Gr 25 Control 26 Ctrl ...

  • Fujitsu CELSIUS W530 - page 64

    Index S Safety information 9 Security functions BIOS Setup 28 Security functions, SmartCard 29 Security measures 27 SecurityLock 27 Serial port 16, 20 Connecting devices 2 0 Serial port, Settings 20 Servicing 34 Setup, see BIOS Setup 26 SmartCard reader , operating 29 Software, installing 21–22 System expansion 34 System settings, BIOS Setup 26 S ...

Manufacturer Fujitsu Category Desktop

Documents that we receive from a manufacturer of a Fujitsu CELSIUS W530 can be divided into several groups. They are, among others:
- Fujitsu technical drawings
- CELSIUS W530 manuals
- Fujitsu product data sheets
- information booklets
- or energy labels Fujitsu CELSIUS W530
All of them are important, but the most important information from the point of view of use of the device are in the user manual Fujitsu CELSIUS W530.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Fujitsu CELSIUS W530, service manual, brief instructions and user manuals Fujitsu CELSIUS W530. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Fujitsu CELSIUS W530.

Similar manuals

A complete manual for the device Fujitsu CELSIUS W530, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Fujitsu CELSIUS W530 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Fujitsu CELSIUS W530.

A complete Fujitsu manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Fujitsu CELSIUS W530 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Fujitsu CELSIUS W530, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Fujitsu CELSIUS W530, that we can find in the current document
3. Tips how to use the basic functions of the device Fujitsu CELSIUS W530 - which should help us in our first steps of using Fujitsu CELSIUS W530
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Fujitsu CELSIUS W530
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Fujitsu CELSIUS W530 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Fujitsu CELSIUS W530?

Use the form below

If you did not solve your problem by using a manual Fujitsu CELSIUS W530, ask a question using the form below. If a user had a similar problem with Fujitsu CELSIUS W530 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)