English dropdown-ico

Manual Fisher XLT-30

12 pages 0.48 mb
Download

Go to site of 12

Summary
  • Fisher XLT-30 - page 1

    XLT-30 Operating Manual Acoustical Leak Detector FISHER RESEARCH LABORATORY ...

  • Fisher XLT-30 - page 2

    CONTENTS Introduction ........................................................................... pg. 1 Instrument Set ....................................................................... pg. 2 Faceplate & Control Panel ................................................. pg. 4 Operating Instructions ............................................ ...

  • Fisher XLT-30 - page 3

    INTRODUCTION Fisher Research Laboratory has always been a leader in the field of acoustical leak detection. From the early LT-10 through the XLT-20, high quality sound amplification has been synonymous with the name Fisher. Fishers XLT-30 takes leak detection to a new level. Ultra sensitive sound microphones, combined with a non-distortion amplific ...

  • Fisher XLT-30 - page 4

    2 INSTRUMENT SET 1. Control Box All listening and filtering controls for the XLT-30 are contained in this sturdy housing. The function of each control is described in the section entitled “Faceplate and Controls”. 2. Big Foot Probe Also known as the Ground Microphone, this probe is to be used on hard surfaces, concrete, asphalt, tile, etc. A fl ...

  • Fisher XLT-30 - page 5

    INSTRUMENT SET 3 On top of the Cylinder Probe is a three position toggle switch for Mute, Listen, and Momentary Listen. As with all Mute controls, learn to use them wisely. When tightening the sounds rods to the Hydrophonic Probe, secure the con- nector with a wrench as to not let it twist. Twisting of that connector could damage wiring on the insi ...

  • Fisher XLT-30 - page 6

    CONTROL PANEL 4 POWER This pad turns the XLT-30 On or Off. When the instrument is turned Off, all settings, or modifications to settings default to the preset factory set- tings. LIGHT Depress pad to turn the back light On or Off. Prolonged use of the Back Light will have minimal effect on the battery life of the XLT-30. VOLUME Depress pad to modif ...

  • Fisher XLT-30 - page 7

    5 (The following filter modes have a frequency range from 60 Hz to 2.4 kHz) HI (High Range) – This filtering mode allows the user to adjust the response in the higher areas of the frequency range. Use the Arrow keys to increase or decrease this frequency response range. LO (Low Range) – Similar to the previous filter mode, the Low Pass filter a ...

  • Fisher XLT-30 - page 8

    6 OPERATING INSTRUCTIONS Set Up 1. Assemble Control Housing, Headset, and your choice of listening probe . The headset must be plugged in for the XLT-30 to operate. 2. Depress POWER pad to turn On the XLT-30. The XLT-30 goes through a five second warm up before the touch pads are functional. During this time, the Display Screen gives information of ...

  • Fisher XLT-30 - page 9

    7 OPERATING INSTRUCTIONS Use of the Notch Filter Occasionally, you may come across a sound that may be masking or covering your ability to adequately hear any leaks. This may be caused by nearby motors, fans, or many other annoyances. (Unfortunately, the most common are sounds caused by automobiles and traffic). The XLT-30 has a Notch, or reject fe ...

  • Fisher XLT-30 - page 10

    Subject to improvement or modification without notice. Fisher Research Laboratory does not warrant suitability to specific use. Fisher Research Laboratory shall in no event be liable for any direct, incidental, consequential or indirect damages. SPECIFICATIONS Operating frequency Range All pass mode 60Hz - 6kHz Filter mode 60Hz - 2.4kHz Filter Type ...

  • Fisher XLT-30 - page 11

    ...

  • Fisher XLT-30 - page 12

    QUALITY Fisher detectors are renowned for their quality. Each detector is hand crafted in the USA with pride PERFORMANCE The worldwide underground utility industry relys on Fisher. Our instruments are durable, dependable, and search deeper.. REPUTATION Fisher produced the first patented metal detector in 1931. For over 70 years, the Fisher logo has ...

Manufacturer Fisher Category Power Screwdriver

Documents that we receive from a manufacturer of a Fisher XLT-30 can be divided into several groups. They are, among others:
- Fisher technical drawings
- XLT-30 manuals
- Fisher product data sheets
- information booklets
- or energy labels Fisher XLT-30
All of them are important, but the most important information from the point of view of use of the device are in the user manual Fisher XLT-30.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Fisher XLT-30, service manual, brief instructions and user manuals Fisher XLT-30. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Fisher XLT-30.

Similar manuals

A complete manual for the device Fisher XLT-30, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Fisher XLT-30 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Fisher XLT-30.

A complete Fisher manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Fisher XLT-30 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Fisher XLT-30, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Fisher XLT-30, that we can find in the current document
3. Tips how to use the basic functions of the device Fisher XLT-30 - which should help us in our first steps of using Fisher XLT-30
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Fisher XLT-30
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Fisher XLT-30 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Fisher XLT-30?

Use the form below

If you did not solve your problem by using a manual Fisher XLT-30, ask a question using the form below. If a user had a similar problem with Fisher XLT-30 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)