Manual Porter-Cable 7412

13 pages 0.21 mb
Download

Go to site of 13

Summary
  • Porter-Cable 7412 - page 1

    Instruction manual The Model and Serial No. plate is located on the main housing of the tool. Record these numbers in the spaces below and retain for future reference. Model No. ______________________________________ Type ___________________________________________ Serial No. _______________________________________ IMPORTANT Please make certain tha ...

  • Porter-Cable 7412 - page 2

    2 Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some example of these chemicals are: ● ● lead from lead-based paints ● ● crystalline silica from bricks and cement and other maso ...

  • Porter-Cable 7412 - page 3

    3 3. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. 4. Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the ris ...

  • Porter-Cable 7412 - page 4

    4 SERVICE 1. Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. 2. When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance Section of this manual. Use of unauthorized parts or failure to follow Main ...

  • Porter-Cable 7412 - page 5

    5 Extreme care should be taken when removing paint. The peelings, residue, and vapors of paint may contain lead, which is poisonous. Exposure to even low levels of lead can cause irreversible brain and nervous system damage; young and unborn children are particularly vulnerable. Before beginning any paint removal process you should determine whethe ...

  • Porter-Cable 7412 - page 6

    6 SYMBOL DEFINITION V ........................ volts A ........................ amperes Hz ........................ hertz W ........................ watts kW ........................ kilowatts µ F ........................ microfarads l ........................ liters kg ........................ kilograms N/cm 2 ........................ newtons per ...

  • Porter-Cable 7412 - page 7

    7 If an extension cord is used, make sure the conductor size is large enough to prevent excessive voltage drop which will cause loss of power and possible motor damage. A table of recommended extension cord sizes will be found in this section. This table is based on limiting line voltage drop to 5 volts (10 volts for 230 volts) at 150% of rated amp ...

  • Porter-Cable 7412 - page 8

    3. Slide the switch button (A) Fig. 1 forward to turn the tool “ON”. When released, the switch button will return to the "OFF" position. 4 . To lock the switch in the “ON” position, move the switch to the “ON” position and depress the front end of the switch button (A) Fig. 1. To release the switch lock, depress the rear end o ...

  • Porter-Cable 7412 - page 9

    Fig. 3A A 9 Fig. 4 3. Seat the guard on the mounting flange. Rotate the guard to a position that will place the guard between the operator and the grinding wheel (or any other accessory requiring a guard). Tighten the clamp screw (A) Fig. 3A to secure the guard in proper position (see Fig. 4). Always make sure that the wheel guard is positioned bet ...

  • Porter-Cable 7412 - page 10

    10 OPERA TION USING A DISC GRINDER Be certain that the wheel guard and auxiliary handle are installed. Firmly grip the auxiliary handle and motor housing (Fig. 8). Lift up the rear of the motor housing so that only the front section of the grinding wheel contacts the work. Use light pressure. Always lift the grinder off the work before starting or ...

  • Porter-Cable 7412 - page 11

    11 SERVICE AND REP AIRS All quality tools will eventually require servicing or replacement of parts due to wear from normal use. These operations, including brush inspection and replacement, should ONLY be performed by either an AUTHORIZED PORTER-CABLE SERVICE STATION or a PORTER-CABLE·DELTA FACTORY SERVICE CENTER. All repairs made by these agenci ...

  • Porter-Cable 7412 - page 12

    12 NOTES PORTER-CABLE LIMITED ONE YEAR WARRANTY Porter-Cable warrants its Professional Power Tools for a period of one year from the date of original purchase. We will repair or replace at our option, any part or parts of the product and accessories covered under this warranty which, after examination, proves to be defective in workmanship or mater ...

  • Porter-Cable 7412 - page 13

    The following are trademarks of PORTER-CABLE • DELTA (Las siguientes son marcas registradas de PORTER-CABLE • DELTA S.A.) (Les marques suivantes sont des marques de fabriquant de la PORTER-CABLE • DELTA): Auto-Set ® , BAMMER ® , B.O.S.S. ® , Builder’s Saw ® , Contractor’s Saw ® , Contractor’s Saw II™, Delta ® , DELTACRAFT ® , D ...

Manufacturer Porter-Cable Category Grinder

Documents that we receive from a manufacturer of a Porter-Cable 7412 can be divided into several groups. They are, among others:
- Porter-Cable technical drawings
- 7412 manuals
- Porter-Cable product data sheets
- information booklets
- or energy labels Porter-Cable 7412
All of them are important, but the most important information from the point of view of use of the device are in the user manual Porter-Cable 7412.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Porter-Cable 7412, service manual, brief instructions and user manuals Porter-Cable 7412. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Porter-Cable 7412.

Similar manuals

A complete manual for the device Porter-Cable 7412, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Porter-Cable 7412 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Porter-Cable 7412.

A complete Porter-Cable manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Porter-Cable 7412 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Porter-Cable 7412, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Porter-Cable 7412, that we can find in the current document
3. Tips how to use the basic functions of the device Porter-Cable 7412 - which should help us in our first steps of using Porter-Cable 7412
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Porter-Cable 7412
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Porter-Cable 7412 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Porter-Cable 7412?

Use the form below

If you did not solve your problem by using a manual Porter-Cable 7412, ask a question using the form below. If a user had a similar problem with Porter-Cable 7412 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)