Manual Oki C5510

28 pages 1.06 mb
Download

Go to site of 28

Summary
  • Oki C5510 - page 1

    Instruction manual IMPORT ANT Please make certain that the person who is to use this equipment carefully reads and understands these instructions before starting operations. ESP AÑOL: PÁGINA 29 FRANÇAIS: P AGE 57 T o learn more about Porter -Cable visit our website at: http://www .porter -cable.com Copyright © 2005 Porter -Cable Corporation The ...

  • Oki C5510 - page 2

    2- ENG A10260 SAFETY GUIDELINES - DEFINITIONS Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury . Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury . Indicates a potentially hazardous situation which, if not avoided, may result in minor ...

  • Oki C5510 - page 3

    3- ENG A10260 IMPORT ANT SAFETY INSTRUCTIONS Save these instructions Improper operation or maintenance of this product could result in serious injury and property damage. Read and understand all warnings and operation instructions before using this equipment. HAZARD WARNING: Risk of explosion or fire How T o Prevent It What Could Happen It is norma ...

  • Oki C5510 - page 4

    4- ENG A10260 WARNING: Risk of Bursting Air T ank: The following conditions could lead to a weakening of the tank, and result in a violent tank explosion and could cause property damage or serious injury . How T o Prevent It What Could Happen WARNING: Risk from Flying Objects The compressed air stream can cause soft tissue damage to exposed skin an ...

  • Oki C5510 - page 5

    5- ENG A10260 WARNING: Risk to Breathing WARNING: Risk of Electrical Shock HAZARD HAZARD Y our air compressor is powered by electricity . Like any other electrically powered device, If it is not used properly it may cause electric shock. Repairs attempted by unqualified personnel can result in serious injury or death by electrocution. Electrical Gr ...

  • Oki C5510 - page 6

    6- ENG A10260 WARNING: Risk of Burns T ouching exposed metal such as the compressor head or outlet tubes, can result in serious bur ns. Never touch any exposed metal parts on compressor during or immediately after operation. Compressor will remain hot for several minutes after operation. Do not reach around protective shrouds or attempt maintenance ...

  • Oki C5510 - page 7

    7- ENG A10260 Review and underst and all instructi ons and warnings in this manual. Become famil iar with the operation and contr ols of the air compress or . Keep operati ng area clear of all persons, pets, and obstacle s. Keep childr en away fro m the air compr essor at all times . Do not operate the produc t when fatigue d or under the influence ...

  • Oki C5510 - page 8

    8- ENG A10260 GLOSSAR Y DUTY CYCLE SPECIFICA TIONS Accessories for this unit are available at the store the unit was purchased. ACCESSORIES Model No. C5510 Running Horsepower 1.9 Bore 2-7/8" Stroke 2" V oltage-Single Phase 120/240 Minimum Branch Circuit Requirement 20 amps Fuse T ype Time Delay Air T ank Capacity (Gallon) 20 ASME Approxim ...

  • Oki C5510 - page 9

    9- ENG A10260 T o Install Handle The wheels and handle do not provide adequate clearance, stability , or support for pulling the unit up and down stairs or steps. The unit must be lifted or pushed up a ramp. Do not lift the unit by the manifold assembly , the unit could be damaged. 1. T o make installation easier , submer ge handle grip into warm s ...

  • Oki C5510 - page 10

    10- ENG A10260 Assemble Rubber Feet 1. Attach rubber feet with the screws, washers, and nuts provided as shown. 2. Tighten securely . T o Assemble Wheels It will be necessary to brace or support one side of the unit when installing the wheels because the compressor will have a tendency to tip. 1. Attach wheels with shoulder bolts and nuts as shown. ...

  • Oki C5510 - page 11

    11- ENG A10260 T o Add Oil T o Pump Compressors are shipped without oil. A small amount of oil may be present in the pump upon receipt of the air compressor . This is due to plant testing and does not mean the pump contains oil. Do not attempt to operate this air compressor without first adding oil to the crankcase. Serious damage can result from e ...

  • Oki C5510 - page 12

    12- ENG A10260 GROUNDING INSTRUCTIONS Risk of Electrical Shock. In the event of a short circuit, grounding reduces the risk of shock by providing an escape wire for the electric current. This air compressor must be properly grounded. The portable air compressor is equipped with a cord having a grounding wire with an appropriate grounding plug (see ...

  • Oki C5510 - page 13

    13- ENG A10260 120/240 Dual V oltage Motor This model has a dual voltage motor , 120 and 240 volt. It is wired for 120 volt but can be converted to 240 volt operation. Instructions for connecting the motor for operation at 240 volt can be found printed on the label attached to the side of the motor . When converting to 240V operation, the attached ...

  • Oki C5510 - page 14

    14- ENG A10260 Description of Operation Become familiar with these controls before operating the unit. On/Aut o/Off Lever : T ur n this switch to " On/A uto" to provi de automat ic power to the pressur e switch and " Off" to remove power at the end of each use. Pressur e Switch: The pressure switch automatically starts the motor ...

  • Oki C5510 - page 15

    15- ENG A10260 Drain V alve: The drain valve is located at the base of the air tank and is used to drain condensation at the end of each use. Check V alve: When the air compressor is operating, the check valve is "open", allowing compressed air to enter the air tank. When the air compressor reaches "cut-out" pressure, the check ...

  • Oki C5510 - page 16

    16- ENG A10260 How to Start: 1. T urn the On/Auto/Off lever to "On/Auto" and allow tank pressur e to build. Motor will stop when tank pressure reaches "cut-out" pressure. 2. Pull the regulator knob out and tur n clockwise to increase pressure. When the desired pressur e is reached push knob in to lock in place. The compressor is ...

  • Oki C5510 - page 17

    17- ENG A10260 MAINTENANCE Customer Responsibilities Daily or after each use Before each use ● ● ● ● Every 8 hours Every 40 hours Every 100 hours Y early Every 160 hours ● ● 1 1- more frequent in dusty or humid conditions Check Safety V alve Drain T ank Oil Leaks Check Oil Change Oil Air Filter NOTE: See "Operation" section fo ...

  • Oki C5510 - page 18

    18- ENG A10260 T o Drain T ank NOTE: Operation of the air compressor will cause condensation to build up in the air tank. Always drain tank on a washable surface or in a suitable container to prevent damaging or staining surfaces. 1. Set the On/Auto/Off lever to "Off". 2. Pull the regulator knob out and tur n counterclockwise to set the o ...

  • Oki C5510 - page 19

    19- ENG A10260 T o Replace Belt Serious injury or damage may occur if parts of the body or loose items get caught in moving parts. Never operate the unit with the belt guard removed. The belt guard should be removed only when the compressor is unplugged. 1. Place the On/Auto/Off lever in the "Off" position. 2. Unplug compressor . 3. Remov ...

  • Oki C5510 - page 20

    20- ENG A10260 Air Compressor Pump Intake and Exhaust V alves Once a year have a T rained Service T echnician check the air compressor pump intake and exhaust valves. Motor Pulley/Flywheel Alignment NOTE: Once the motor pulley has been moved from its factory set location, the grooves of the flywheel and pulley must be aligned to within 1/16" t ...

  • Oki C5510 - page 21

    21- ENG A10260 SERVICE AND ADJUSTMENTS T o Replace or Clean Check V alve 1. Release all air pressure from air tank. See "T o Drain T ank" in the "Maintenance" section. 2. Unplug air compressor . 3. Using an adjustable wrench loosen outlet tube nut at air tank and pump. Carefully move outlet tube up away from check valve. 4. Usin ...

  • Oki C5510 - page 22

    22- ENG A10260 T o Replace Regulator 1. Release all air pressur e from air tank. See "T o Drain T ank" in the "Maintenance" section. 2. Set the On/Auto/Off lever to "Off" and unplug unit. 3. Using an adjustable wrench remove the outlet pressure gauge and quick connect from the regulator . 4. Remove the regulator . 5. A ...

  • Oki C5510 - page 23

    23- ENG A10260 STORAGE Before you store the air compressor , make sure you do the following: 1. Review the "Maintenance" section on the preceding pages and perform scheduled maintenance as necessary . 2. Set the On/Auto/Off lever to " Off" and unplug unit. 3. T urn the regulator counterclockwise and set the outlet pressure to ze ...

  • Oki C5510 - page 24

    24- ENG A10260 TROUBLESHOOTING PROBLEM CAUSE CORRECTION Pressur e switch does not shut off motor when compressor reaches "cut- out" pressur e. Pressur e switch "cut-out" too high. Move On/Auto/Off lever to the " Off" position, if the unit does not shut off contact a T rained Service T echnician. Contact a T rained Serv ...

  • Oki C5510 - page 25

    25- ENG A10260 PROBLEM CAUSE CORRECTION Compressor is not supplying enough air to operate accessories. Prolonged excessive use of air . Compressor is not large enough for air requirement. Hole in hose. Check valve restricted. Air leaks. Restricted air intake filter . Decrease amount of air usage. Check the accessory air requir ement. If it is highe ...

  • Oki C5510 - page 26

    26- ENG A10260 PROBLEM CAUSE CORRECTION Motor will not run. Fuse blown, circuit breaker tripped. 1. Check fuse box for blown fuse and replace as necessary . Reset circuit breaker . Do not use a fuse or circuit breaker with higher rating than that specified for your particular branch circuit. 2. Check for proper fuse. Y ou should use a time delay fu ...

  • Oki C5510 - page 27

    27- ENG A10260 PROBLEM CAUSE CORRECTION Knocking Noise. Possible defect in safety valve. Operate safety valve manually by pulling on ring. If valve still leaks, it should be replaced. Loose pulley . Tighten pulley set screw , see Parts manual for torque specifications. Compressor mounting screws loose. Tighten mounting screws,s ee Parts manual for ...

  • Oki C5510 - page 28

    28- ENG A10260 LIMITED W ARRANTY PORTER-CABLE CORPORA TION warrants to the original purchaser that all products covered under this warranty are free from defects in material and workmanship. Products covered under this warranty include air compressors, air tools, service parts, pressure washers, and generators, which have the following warranty per ...

Manufacturer Oki Category Air Compressor

Documents that we receive from a manufacturer of a Oki C5510 can be divided into several groups. They are, among others:
- Oki technical drawings
- C5510 manuals
- Oki product data sheets
- information booklets
- or energy labels Oki C5510
All of them are important, but the most important information from the point of view of use of the device are in the user manual Oki C5510.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Oki C5510, service manual, brief instructions and user manuals Oki C5510. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Oki C5510.

Similar manuals

A complete manual for the device Oki C5510, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Oki C5510 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Oki C5510.

A complete Oki manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Oki C5510 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Oki C5510, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Oki C5510, that we can find in the current document
3. Tips how to use the basic functions of the device Oki C5510 - which should help us in our first steps of using Oki C5510
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Oki C5510
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Oki C5510 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Oki C5510?

Use the form below

If you did not solve your problem by using a manual Oki C5510, ask a question using the form below. If a user had a similar problem with Oki C5510 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)