Manual Polycom ViewStation EX

224 pages 1.37 mb
Download

Go to site of 224

Summary
  • Polycom ViewStation EX - page 1

    ViewStation ® EX, ViewStation FX, and VS4000 API Guide VS4000 User’ s Guide April 2003 Edition Release 5.0 1725-10656- 004 ...

  • Polycom ViewStation EX - page 2

    Trademark Information Polycom®, the Polycom logo design, and V i ewStation® ar e re gistered trademarks of Polycom Inc. ARENA™, Global Ma nagement System™, PathNavigator™, Po lycom OneDial™, and V isual Concert™ are tradem arks of Polycom, Inc. in th e Unit ed Stat es and various oth er coun tries. Internet Explorer™, NetMeeting®, W ...

  • Polycom ViewStation EX - page 3

    © Polycom, Inc. 2003 i Contents .............. ............. ................ ................ ............. ................ ................ ... i What’s New in Release 5.0? ............... ................ ................. ................ ............ 2 Accessing the API Interf ace ............. ................ ................ ........... ...

  • Polycom ViewStation EX - page 4

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide ii www .polycom.com callstate ............... ................ ............. ................ ................ ................ ... 31 camera ................... ................ ................ ............. ................ ................ 32 camera1ptz .......... ................ ......... ...

  • Polycom ViewStation EX - page 5

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 iii gatewayprefix ................ ................ ............. ................ ................ ......... 67 gatewaysetup ................ ... ............. ................ ............. ................ ......... 68 gatewaysuffix ............ ................. ...... ...

  • Polycom ViewStation EX - page 6

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide iv www .polycom.com nearloop ................. ............. ................ ................ ............. ................ ... 107 netmeetingip .............. ................ ............. ................ ................. ............ 108 netstats ............ ................. .......... ...

  • Polycom ViewStation EX - page 7

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 v streammulticastip .......... ................ ............. ................ ................ ......... 140 streamrestoredefaults ............ .......... ...... ................. ............. ............... 141 streamrouterhops ................ ................ ....... ...

  • Polycom ViewStation EX - page 8

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide vi www .polycom.com ISDN BRI Commands ......................... ................ ................ ............. ................ 174 isdnareacode ................ ................. ................ ................ ............. ......... 174 isdncountrycode ..... ................ ............. ...

  • Polycom ViewStation EX - page 9

    © Polycom, Inc. 2003 1 Vi e w Stat i o n E X , Vi e w Stat i o n F X , and VS4000 API Guide This document describe s the CGI-based V iewS tation EX, ViewS tation FX, and VS4000 API ( Application Programming Interface). This API is a set of commands imple mented within the sh ell. The commands are available for ad vanced users who want to automate ...

  • Polycom ViewStation EX - page 10

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 2 www .polycom.com What’ s New in Release 5.0? The following table lists the major changes for Release 5.0. Ty p e o f Command Command Change system allowmixedcalls new command audioqualityg7221 new command camera near move When you are not in a call: All camera near move commands need to be ...

  • Polycom ViewStation EX - page 11

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 3 Accessing the API Interface Using T elnet T o star t a T elnet session from Windows: 1. From your co mputer desk top, click Sta rt and Run . 2. In the Run window , enter the followi ng informatio n in the Open field: telnet <system IP address> 24 Note T elneting to ...

  • Polycom ViewStation EX - page 12

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 4 www .polycom.com 1. Locate the RS-232 seri al cable (DB9-to-DB9 straight through). 2. Connect on e end of th e cable to the serial po rt of your PC. 3. Connect the other end to the RS-232 serial port on the back panel of the VS 4000 system . ViewStation EX and ViewStation FX Connect your PC t ...

  • Polycom ViewStation EX - page 13

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 5 RS-232 Interface Information The following provides a dditional information about the V iewS tation EX, ViewS tation FX, and VS4000 systems’ RS-232 interface. RS-232 User Interface Screen The RS-232 user interface scre en is used to set the baud rate and the modes for ...

  • Polycom ViewStation EX - page 14

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 6 www .polycom.com • Pass-Thru Mode to Pass- Thru Mode: Both endpoint s are set to Pass-Thru Mode. • Pass-Thru Mode to Control Mode : The near site is set to Pass-Thru Mode and the far si te is set to Control Mode. Operational Modes: The following information describes operational modes in ...

  • Polycom ViewStation EX - page 15

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 7 control the far site system, us ing the far site’s Command Line Interface. The following t able summarizes the port operation based on the RS-232 mode configured by ea ch endpoint. Flow Control The system support hardware flow co ntrol. Users should make sure that hard ...

  • Polycom ViewStation EX - page 16

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 8 www .polycom.com RS-232 Serial Cable Pinout and Connections (ViewS t ation EX and FX) The RS-232 seria l cable has a 9-pi n DB-9 conn ector on one end and an 8-pin mini-DIN connector o n the other end. It is used to connect the ViewS tation EX or ViewS tation FX to a terminal or another commu ...

  • Polycom ViewStation EX - page 17

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 9 RS-232 Serial Cable Pinout and Connections (VS4000) The RS-232 serial cable has a 9-pin DB-9 connector on both ends. It is used to connect the VS4000 to a terminal or another communications device. Pin Number Functio n 1 - DCD Data Carrier Detect 2 - RX Receive 3 - TX T ...

  • Polycom ViewStation EX - page 18

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 10 www .polycom.com S t atus Display The call st atus can be displayed in a number of ways. The display call st atus command shows tab le of current calls. Using the “listen” or “dial” Comma nd T o display real-time status on ind ividual B channels (incoming/outgoing calls), either regi ...

  • Polycom ViewStation EX - page 19

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 11 cs: call[0] chan[0] dialstr[95551212] state[BONDING] cs: call[0] chan[0] dialstr[95551212] state[COMPLETE] cs: call[0] chan[1] dialstr[95551212] state[RINGING] cs: call[0] chan[1] dialstr[95551212] state[CONNECTED] cs: call[0] chan[2] dialstr[95551212] state[RINGING] cs ...

  • Polycom ViewStation EX - page 20

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 12 www .polycom.com -> ->listen video ringing // there is an incoming call, auto answer is on ->cs: call[0] chan[0] dialstr[8005551212] state[RINGING] cs: call[0] chan[0] dialstr[8005551212] state[CONNECTED] cs: call[0] chan[0] dialstr[8005551212] state[BONDING] cs: call[0] chan[0] dia ...

  • Polycom ViewStation EX - page 21

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 13 Synt ax Summary The following syntactic notation is used for the API shell con trol commands. Note All defined commands are case se nsitive. <x> A required par ameter . The text between the angle d bracket s is one or more parame ter(s) that can occur at the speci ...

  • Polycom ViewStation EX - page 22

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 14 www .polycom.com If the string parameter contains a compound name or space s, use quotation marks, as in the following examples: gabpassword set "My FX Password" gabpassword set "111 222 333" {a..b} A number ranging from a to b. About the “get” Subcommand In most ca s ...

  • Polycom ViewStation EX - page 23

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 15 System Commands This section describes each she ll command and its parameters. All commands are listed with their par ameters spelled out. !<“str”|{1..64}> Description This command allows you to execute a pr eviously used command starting with a specific numbe ...

  • Polycom ViewStation EX - page 24

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 16 www .polycom.com gatewaynumber set 123456789 gatewaynumber 123456789 restart system for changes to take effect. restart now? <y,n> ->!2 hangup video hanging up video call ->!h hangup video hanging up video call ->!hi history 1 gatewaynumber set 123456789 2 hangup video 3 histo ...

  • Polycom ViewStation EX - page 25

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 17 abk all abk letter <{a..z}> abk range <{a..b}> Description This command displays loca l Address Book entries. batch Displays a batch of 10 records. The maximu m number of batches that can be displayed is 59 . all Displays all the records in the Address Book. ...

  • Polycom ViewStation EX - page 26

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 18 www .polycom.com Note This command cannot be accessed through the RS-232 port. set Sets the passwor d used for remote management of th e system if followed by the pa s s w o r d parameter . If you want to erase the current setting, omit the pas s w o r d paramete r . The system must have an ...

  • Polycom ViewStation EX - page 27

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 19 Examples advnetstats advnetstats 1 Sample Output call:1 tar:24k rar:24k tvr:64.3k rvr:104k tvru:63.8k rvru:114.6k tvfr:15.0 rvfr:15.0 vfe --- tapl:66 rapl:0 taj:46mS raj:40mS tvpl:122 rvpl:0 tvj:21mS rvj:60mS dc:--- rsid:Polycom_VS4000_5.0 where: tar Transmit audio rate ...

  • Polycom ViewStation EX - page 28

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 20 www .polycom.com tmlpr T ransmit MLP rate (H.320 calls only) rvj Receive video jitter (H.323 calls only) rmlpr Receive MLP rate (H.320 calls only ) dc Data conference rsid Remote system id User Interface Screen Location System Info>Diagnostics>Advanced S tats allowabkchanges <yes|no ...

  • Polycom ViewStation EX - page 29

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 21 allowdialing <yes|no|get> Description This command enables or disable s the Allow Dialing option. yes Allows users to place calls. no Disables dialing. Y our system can only receive calls. get Displays the current setting ( yes or no ). Example allowdialing get Us ...

  • Polycom ViewStation EX - page 30

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 22 www .polycom.com Example allowmixedcalls yes User Interface Screen Location System Info>Admin Setup>Video Network > Call Preferences: Allow H.320 and H.323 Mixed Calls allowremotemon <get> Description This command displays the curr ent state of the Allow Remote Monitoring opti ...

  • Polycom ViewStation EX - page 31

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 23 Example allowusersetup yes User Interface Screen Location System Info>Admin Setup>General Setu p (page 2-Next): Allow User Setup answer <phone|video> Description This command answers incoming video or POTS calls. phone Answers incoming POTS cal ls. video Ans ...

  • Polycom ViewStation EX - page 32

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 24 www .polycom.com set Sets the call spee d threshold value. Requires a parame ter from <64|1 12|128|168|192|224|25 6|280| 320|336|38 4|392|448|512>. get Displays the current threshold value of the call. 64..512 Range of selectable speeds. Example audioquality set 168 User Interface Scre ...

  • Polycom ViewStation EX - page 33

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 25 Example audioqualityg7221 set 256 User Interface Screen Location System Info> Admin Setup> Phone/Audio: Au dio Quality autoanswer <yes|n o|donotdisturb|get> Description This command sets the Auto Answ er Point to Point mode which determines how the system wi ...

  • Polycom ViewStation EX - page 34

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 26 www .polycom.com autodiscovernat <yes|no|get> Description This command enables or disable s the Auto Discover NA T option. yes Enables the option to automatically assign the W AN IP address that is used to place and receive calls outside the W AN. no Disables the option. get Displays t ...

  • Polycom ViewStation EX - page 35

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 27 get Displays the current setting ( yes or no ). Example autoh323dialing yes User Interface Screen Location System Info> Admin Setup> LAN/H.323> H.323>Setup: Au to H.323 Dialing backlightcompensat ion <yes|no|get> Description This command enables or dis ...

  • Polycom ViewStation EX - page 36

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 28 www .polycom.com button <#|*|1|2|3|4| 5|6|7|8|9|0|auto| callhangup|camera|delete|directory|down|fa r| home|info|keyboard| left|lowbattery| menu|mute|near|period|pickedup|pip|preset| putdown|right|select |slides|snapshot|up| volume+|volume-|zoom+|zoom-> Description This command allows t ...

  • Polycom ViewStation EX - page 37

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 29 delete Not implemente d. directory T akes the user to the Address Book screen. down Sends the down key to the user interface (dow n arrow). far Sends the Far key to the user interfac e. home T akes the user to the main screen. info Sends the Info command to the user i n ...

  • Polycom ViewStation EX - page 38

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 30 www .polycom.com zoom+ Sends the Zo om in key to the user interface. zoom- Sends the Zo om out key to the user interface. Example 1 button up This command sends th e up arrow command to the user interface. Example 2 button near left right callhangup This valid command combin es the following ...

  • Polycom ViewStation EX - page 39

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 31 callstate <register|unregister|get> Description This command registe rs the T elnet or RS-232 session to receive notifications about call state activities. register Registers the system to give notific ation of call activities. unregister Disables the regis ter mo ...

  • Polycom ViewStation EX - page 40

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 32 www .polycom.com camera <near|far|register|unregister> Subcommands camera near <{1..4}|source|move|stop|getposition| setposition|tracking> camera far <{1..5}|source|move|stop|tracking> camera <near|far> source camera <near|far> mov e <zoom+|zoom-|left| right| ...

  • Polycom ViewStation EX - page 41

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 33 near move lef t Near camera direction change (st art moving left). near move right Near cam era directio n change (s tart moving right) . near move up Near camera direction change (st art moving up). near move down Near camera directio n change (start moving down) near ...

  • Polycom ViewStation EX - page 42

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 34 www .polycom.com far subcommands far 1..5 Select s a far camera as the main video source (Camera sou rce 1-5). far source Returns the number of th e camera source currently selected. far move zoom+ Far camera direction ch ange (start zooming in). far move zoom- Far camera direc tion change ( ...

  • Polycom ViewStation EX - page 43

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 35 Example 1 camera far 2 This command causes the re mote terminal to begin sending its camera 2. Example 2 camera far move left This command causes the fa r camera to start p anning to the left. Example 3 camera near move zoom+ This command causes the nea r camera to zoom ...

  • Polycom ViewStation EX - page 44

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 36 www .polycom.com camera4ptz <yes|no|get> Description This command set s camera source 4 to pan-tilt-z oom mode. This command is specific to the VS4000 system. Note See the command camerainput on p age 37 to set your VS4000 camera source to S-video or co mposite mode. yes Enables pan- t ...

  • Polycom ViewStation EX - page 45

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 37 Example cameradirection normal User Interface Screen Location System Info> Admin Setup> Video/Camera>Camera s: Camera Direction camerainput <1|2|3|4> <off|s-video| composite|get> camerainput 1 <off|s- video|composite|get> camerainput 2 <off ...

  • Polycom ViewStation EX - page 46

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 38 www .polycom.com Example 1 camerainput 1 s-video Example 2 camerainput 4 get Output to Example 2 camerainput 4 off User Interface Screen Location System Info>Adm in Setup>Video/Cameras >Cameras>VS400 0 Camera Setup: Prima ry Camera chaircontrol < rel_chair|req_chair|req_floor| ...

  • Polycom ViewStation EX - page 47

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 39 rel_chair Releases the chair . req_chair Requests th e chair . req_floor Request s the floor . req_term_name <term_no> Requests the terminal name for the terminal numbered term_no . req_vas Requests voice activated switching. view <te rm_no> Views the term i ...

  • Polycom ViewStation EX - page 48

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 40 www .polycom.com colorbar <on|off> Description This command turns the dia gnostic color bars on or off. on T urns on the co lor bars. off T urns of f the color bars. Example colorbar on User Interface Screen Location System Info> Diagnostics>Co lor Bar: View Color Bar s country & ...

  • Polycom ViewStation EX - page 49

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 41 Note Use quot ation marks around a compound name or strings containing sp aces (Ex: “united states” or “1 1 1 222 333”). Examples country set germany country set “ united states “ User Interface Screen Location System Info>Admin Setup >General Setup: C ...

  • Polycom ViewStation EX - page 50

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 42 www .polycom.com daylightsavings <yes|no|get> Description This command set s the Global Management System daylight savings time. yes Enables dayli ght savings ti me. no Disables daylight savings time. get Displays the status of this option ( yes or no ). Example daylightsavings yes Use ...

  • Polycom ViewStation EX - page 51

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 43 the curren t setting, om it the xxx.xxx.xxx.xxx par am et e r . get Displays the default gateway IP address. xxx.xxx.xxx.xxx Defa ult gateway IP address. Example defaultgateway set 192.168.1.5 User Interface Screen Location System Info>AdminSetup>LAN/H.323>LAN/ ...

  • Polycom ViewStation EX - page 52

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 44 www .polycom.com User Interface Screen Location System Info>Adm in Setup>LAN/H. 323>LAN/In tranet>LAN &Intranet: DHCP dial <addressbook|auto|manual|phone> dial addressbook <"addr book name"> dial auto <speed> <“dialstr”> dial manual<&q ...

  • Polycom ViewStation EX - page 53

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 45 h323|h320|ip| isdn T ype of call. The p arameters ip and isdn are deprecated. phone Dials a POTS number . Requires the parame ter dialstring . dialstring V alid POTS directory number . Note Use quot ation marks around a compound name or strings containing sp aces (Ex: ? ...

  • Polycom ViewStation EX - page 54

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 46 www .polycom.com diffserv <set|get><{0..63}> diffserv set <{0..63}> diffserv get Description This command let s you enable the DiffServ option and specify a number that represent s a priority level for the T ype of Service (Quality of Service). The priority level valu e can ...

  • Polycom ViewStation EX - page 55

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 47 Note Use quot ation marks around a compound name or strings containing sp aces (Ex: “united states” or “1 1 1 222 333”). Examples dir dat dir abk dir display call Description This command displays call ID, st atus, speed, and the number to which this system is c ...

  • Polycom ViewStation EX - page 56

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 48 www .polycom.com Ouput Hi, my name is: Jw_System Here is what I know about myself: Serial Number: xxxxx Brand: Polycom Software Version: Release 5.0 FX - 14 Mar 2003 Model: VSFX4 Network Interface: PRI_E1 MP Enabled: Yes H323 Enabled: Yes IP Address: 192.168.1.104 Time In Last Call: 0:43:50 ...

  • Polycom ViewStation EX - page 57

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 49 displayglobaladdre sses <yes|no|get> Description This command enables or disab les the display of global addresses in the system’s Address Book. yes Enables th e display of global addre sses. no Disables the display of global addresses. get Displays the current ...

  • Polycom ViewStation EX - page 58

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 50 www .polycom.com User Interface Screen Location System Info>A dmin Setup>Video/ Cameras>Monitors>TV Monitors: Display Icons in a Call displayipext <yes|no|get> Description This command enables or disable s the display of the IP extension field . This extension is needed whe ...

  • Polycom ViewStation EX - page 59

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 51 get Displays the current setting ( yes or no ). Example displayipisdninfo yes User Interface Screen Location System Info>Admin Se tup>General Setup: Display My IP and ISDN Information displayparams Description This command outputs the list of all the system settin ...

  • Polycom ViewStation EX - page 60

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 52 www .polycom.com gmsurl 9 <empty> gmsurl 10 <empty> gmscontactperson <empty> gmscontactnumber <empty> gmscontactemail <empty> gmscontactfax <empty> gmstechsupport <empty> gmscity <empty> gmsstate <empty> gmscountry <empty> gabserver ...

  • Polycom ViewStation EX - page 61

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 53 Description This command is used to configur e DNS servers (up to 4 DNS servers can be configured). Af ter a change is made, the system prompts the user for restart. Note This option can only be set when DHCP is of f. set <{1..4}> Set s a DNS server when followed ...

  • Polycom ViewStation EX - page 62

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 54 www .polycom.com no Disables the option. get Displays the current setting ( on or off ). Example dynamicbandwidth yes User Interface Screen Location System Info>Adm in Setup>LAN/H. 323>QOS: Dynam ic Bandwidth e164ext <set|get> ["e.164name"] e164ext set ["e.164na ...

  • Polycom ViewStation EX - page 63

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 55 Response e164ext <empty> restart system for changes to take effe ct. Restart now? <y, n> User Interface Screen Location System Info>A dmin Setup>LAN /H.323>H.323>G ateway: Ga tewa y Number>Extension echocanceller <yes|no|ge t> Descriptio ...

  • Polycom ViewStation EX - page 64

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 56 www .polycom.com enablesnmp <yes |no|get> Description This command enables or disables the ability to take or send snapshots . This option is enabled by default. yes Enables the option. no Disables the option. get Displays the current setting ( on or off ). Example enablesnmp yes User ...

  • Polycom ViewStation EX - page 65

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 57 User Interface Screen Location System Info>A dmin Setup>LAN /H.323>SNMP: Ena ble SNMP exit Description This command ends an API co mmand session. Example exit farcontrolnearcamera <yes|no|get> Description This command sets far control of the near camera, ...

  • Polycom ViewStation EX - page 66

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 58 www .polycom.com farloop <on|off> Description This command turns the far -end loop on or off, when in a call. on T urns the op tion on. off T urns the optio n off. Example farloop on User Interface Screen Location System Info>Dia gnostics>Far End Loop farnametimedisplay <set|g ...

  • Polycom ViewStation EX - page 67

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 59 Examples farnametimedisplay set farnametimedisplay set 120 User Interface Screen Location System Info >User Setup: Far Site Name Display gabk batch <{0..59}> Description This command displays Global Address Book entries in batches. 0..59 Range of batches. A sel ...

  • Polycom ViewStation EX - page 68

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 60 www .polycom.com pa s s w o r d Password used to access the GAB server . V a lid characters are: a through z (l ower and uppercase), -, _, @, /, ;, ,, ., , 0 through 9. Note Use quot ation marks around a compound name or strings containing sp aces (Ex: “united states” or “1 1 1 222 33 ...

  • Polycom ViewStation EX - page 69

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 61 User Interface Screen Location System Info >User Setup>LAN/H. 323>Global Address>Server: Server IP Addr ess gatekeeperip <set|g et> ["xxx.xxx.xxx.xxx" ] gatekeeperip set [" xxx.xxx.x xx.xxx"] gatekeeperip set gatekeeperip get Descri ...

  • Polycom ViewStation EX - page 70

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 62 www .polycom.com gatewayareacode <set|get> ["areacode"] gateway areacode set ["areacod e"] gateway areacode set gateway areacode get Description This command sets th e gatewa y area cod e. set Sets the area code when followed by the areacode parameter . If you want ...

  • Polycom ViewStation EX - page 71

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 63 gatewaycountrycode <set|get > ["number"] gatewayc ountrycode set ["number"] gatewayc ountrycode set gatewaycountry code get Description This command sets the gateway country code. set Sets the gate way country code when followed by the number p ...

  • Polycom ViewStation EX - page 72

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 64 www .polycom.com gatewayext <set|get> ["gateway extension"] gatewayext set ["gatew ay extension"] gatewayext set gatewayext get Description This command set s the gateway extension number . Y ou need to restart the system for changes to take ef fect. set Sets the ga ...

  • Polycom ViewStation EX - page 73

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 65 gatewaynumber <set|get> ["number"] gatewaynumber set ["number"] gatewaynumber set gatewaynumber get Description This command set s the gateway number . set Sets the gateway number wh en followed by the number p arameter . If you want to erase t ...

  • Polycom ViewStation EX - page 74

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 66 www .polycom.com gatewaynumbertype <did|number+e xtension|get> Description This command specifies the Gateway Number T ype. It can be either Direct Inward D ial (DID) or Number + Ex tension. did The number of digit s in the DI D is that portion of the full DID that the gateway will be ...

  • Polycom ViewStation EX - page 75

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 67 gatewayprefix <set|get>< " valid speed " > [ " value " ] gatewayprefix set <"v alid spee d"> ["value"] gatewayprefix set <"v alid spee d"> gatewayprefix get <"v alid speed"> Descri ...

  • Polycom ViewStation EX - page 76

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 68 www .polycom.com Example gatewayprefix set 168 90 User Interface Screen Location System Info> Admin Setup> LAN/H.323> H.323>Gate way (page 2): Prefix gatewaysetup Description This command list s all the available speeds at once. Example gatewaysetup Output 56 #12 #13 64 #14 #16 2 ...

  • Polycom ViewStation EX - page 77

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 69 gatewaysuffix <set|g et><"valid speed"> ["value"] gatewaysuffix set <"v alid speed"> ["value"] gatewaysuffix set <"v alid speed"> gatewaysuffix get <"v alid spee d"> Description Th ...

  • Polycom ViewStation EX - page 78

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 70 www .polycom.com Example gatewaysuffix set 192 11 User Interface Screen Location System Info> Admin Setup> LAN/H.323> H.323>Gate way (page 2): Suffix gendial [{0..9| #|*}] Description This command generates DTMF dialing tone s to POTS line. 0..9|#|* Represents valid buttons. Exam ...

  • Polycom ViewStation EX - page 79

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 71 get screen Description This command retur ns the name of the current screen. It is intend ed to let the control panel p rogramme r know which screen the user interface is currently d isplaying. Example get screen Output Example CGenToneScreen gmscity <set|get>[&qu ...

  • Polycom ViewStation EX - page 80

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 72 www .polycom.com Example gmscity set Paris User Interface Screen Location System Info> Admin Setup> LAN/H.323> Global Manag ement> Info 1: City gmscontactemail <set|get> ["email" ] gmscontactemail set ["email"] gmscontactemail set gmscontactemail get Des ...

  • Polycom ViewStation EX - page 81

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 73 gmscontac tfax <set|g et> ["fax" ] gmscontactfax set ["fax"] gmscontactfax set gmscontactfax get Description This command sets the GM S contact fax information. set Sets the GMS cont act fax in formation when followed by the fax parameter . If ...

  • Polycom ViewStation EX - page 82

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 74 www .polycom.com gmscontactnumber <set|get> [ "number"] gmscontactnumber set ["number"] gmscontactnumber set gmscontactnumber get Description This command sets the GMS cont act number information. set Sets the GMS con tact number informatio n when followed by the nu ...

  • Polycom ViewStation EX - page 83

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 75 gmscontactperson <s et|get> ["person"] gmscontactperson set ["person"] gmscontactperson set gmscontactperson get Description This command sets the GMS contact person information. set Sets the GMS con tact person information when followed by the ...

  • Polycom ViewStation EX - page 84

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 76 www .polycom.com gmscountry <set|get> ["country"] gmscountry set ["country"] gmscountry set gmscountry get Description This command sets the GMS country information. set Sets the GMS country inform ation when followed by the country p arameter . If you want to era s ...

  • Polycom ViewStation EX - page 85

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 77 gmsstate <set|get> ["state"] gmsstate set ["state"] gmsstate set gmsstate get Description This command set s the GMS state information. set Sets the GMS st ate information when followed by the st ate parameter . If you want to erase the current ...

  • Polycom ViewStation EX - page 86

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 78 www .polycom.com gmstechsupport <set|get> ["tech support digits"] gmstechsupport set ["tech support digits"] gmstechsupport set gmstechsupport get Description This command set s the GMS technical support phone number information. set Sets the technical su pport info ...

  • Polycom ViewStation EX - page 87

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 79 gmsurl <set|get> <{1..10}> ["xxx.xxx.xxx.xxx "] gmsurl set <{1..1 0}> ["xxx.xxx.xxx.x xx"] gmsurl set <{1..10}> gmsurl get <{1..10}> Description This command set s the URL of the GMS server that manages your system. When ...

  • Polycom ViewStation EX - page 88

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 80 www .polycom.com User Interface Screen Location System Info> Admin Setup> LAN/H.323> Global Manag ement> Setup>Select Server URLs... graphicsmonitor <tv|fx vga|visualconcert|get> Description This command set s the graphics monitor . tv Selects the TV moni tor as the grap ...

  • Polycom ViewStation EX - page 89

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 81 graphicsmonitorfxvga <on|off|get> Description This command enables or disable s the system’s VGA graphics monitor . on Enables the VGA monitor as the graphic s monitor . Enable this option if you have a high-resolution VGA monitor or projecto r connected to the ...

  • Polycom ViewStation EX - page 90

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 82 www .polycom.com off Disables the TV moni tor as the graph ics monitor . get Displays the current setting ( on or off ). Example graphicsmonitortv on User Interface Screen Location System Info>Admin Setup >Video/Camera>Monitors>Gra phics Monitor: TV Monitor graphicsmonitorvisualc ...

  • Polycom ViewStation EX - page 91

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 83 h323name <set|get> ["H.323 name"] h323name set ["H. 323name"] h323name set h323name get Description This command sets the H.323 name. set Sets the H.323 na me when followed by the H.323name parameter . If you want to eras e the current setting, ...

  • Polycom ViewStation EX - page 92

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 84 www .polycom.com hangup <phone|video> hangup phone hangup video [{1..3}] hangup video Description This command hangs up a telephone or video call. phone Hangs up the current a udio call. video Hangs up the current video call if no parameter from the range {1..3} is specified. A specifi ...

  • Polycom ViewStation EX - page 93

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 85 all Displays detailed help for all commands. help Describes the various types of help described in this section. verbose Sets verbose mode: shows synt ax and help for commands. terse Sets terse mode : shows only help for commands without syntax. string Displays detailed ...

  • Polycom ViewStation EX - page 94

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 86 www .polycom.com Output to Example 2 (p artial) ! abk adminpassword advnetstats allowabkchanges allowdialing allowmixedcalls allowremotemon allowusersetup answer audioquality audioqualityg7221 autoanswer autodiscovernat hires <{2|3}> <yes|no|get> Description This command set s th ...

  • Polycom ViewStation EX - page 95

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 87 Output to Example 2 camera 2 hires No User Interface Screen Location System Info>Admin Setup>V ideo Cameras>Cameras: High Resolution Cameras history Description This command list s the last commands used in the current session. The maximum number of commands th ...

  • Polycom ViewStation EX - page 96

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 88 www .polycom.com hostname <set|get> ["hostname"] hostname set ["hostname"] hostname set hostname get Description This command set s the LAN host name. This is the name assigned to the system for TCP/IP configurat ion and it can be used in place of an IP address when ...

  • Polycom ViewStation EX - page 97

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 89 invalid characters ar e removed from the system name to obtain a valid LAN host name. If the resulting string is empty , the default LAN host name is Admin. Example 1 hostname set MySystem Example 2 hostname set Output to Example 2 hostname ADMIN User Interface Screen L ...

  • Polycom ViewStation EX - page 98

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 90 www .polycom.com xxx.xxx.xxx.xxx IP ad dress of the system. Example ipaddress set 192.168.1.111 User Interface Screen Location System Info>A dmin Setup>LAN /H.323>LAN/In tranet> LAN & Intranet: IP Address ipdialspeed <set|get>< "valid speed"><on|off&g ...

  • Polycom ViewStation EX - page 99

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 91 Note Use quot ation marks around a compound name or strings containing sp aces (Ex: “united states” or “1 1 1 222 333”). Example ipdialspeed get 168 Output ipdialspeed 168 off User Interface Screen Location System Info>A dmin Setup>LAN /H.323>H.323>D ...

  • Polycom ViewStation EX - page 100

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 92 www .polycom.com ipstat Description This command output s the same information that is displayed on the LAN & Intranet and Advanced LAN Settings screens: LAN host name, WINS resolution, DHCP , IP address, DNS servers 1-4, default gateway , subnet mask, and WINS server . Example ipstat Ou ...

  • Polycom ViewStation EX - page 101

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 93 keypadaudioconf <yes |no|get> Description This command set s the keypad au dio confirmation. When this option is enabled, an audio response is echoed when a numeric key is depressed on the remote contr ol. yes Enables audio confirmation. no Disables aud io confirm ...

  • Polycom ViewStation EX - page 102

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 94 www .polycom.com set Sets the command . It requires a parame ter from <englishus, englishuk, french, german, it alian, sp anish, japane se, chinese, portuguese, norwegian>. get Displays the current langua ge on the system. englishus, englis huk, french, german, it alian, spanish, jap a ...

  • Polycom ViewStation EX - page 103

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 95 User Interface Screen Location System Info>A dmin Setup>LAN /H.323>LAN/In tranet> Advanced LAN Settings lanstat <min|misc|re set|sec|tmin|total> lanstat min lanstat min [{0..60}] lanstat misc lanstat reset lanstat sec lanstat tmin lanstat tmin [{0..60} ...

  • Polycom ViewStation EX - page 104

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 96 www .polycom.com 0..60 Maximum number of minutes that can be specified is 60. Example 1 lanstat min 1 Output to Example 1 lanstat: LAN statistics for minute -1 lanstat: Port 0 Port 1 lanstat: rx_bytes 985 0 lanstat: tx_bytes 351 0 lanstat: rx_packets 6 0 lanstat: tx_packets 5 0 lanstat: rx_e ...

  • Polycom ViewStation EX - page 105

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 97 lanstat: Max tx iterations = 8 lanstat: Max rx iterations = 4 lanstat: Max interrupt iters = 3 lanstat: Total interrupts = 113137865 lanstat: Max interrupt delay = 441170 lanstat: Last interrupt delay = 214835 lanstat: end listen <phone|video|sleep> Description Th ...

  • Polycom ViewStation EX - page 106

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 98 www .polycom.com listen waking up Notification of event: the system is waking up. maxgabintern ationalcallspeed <set|g et> < " valid speed " > maxgabinternationalcallspeed get Description This command set s the maximum speed for international ISDN calls made from the Gl ...

  • Polycom ViewStation EX - page 107

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 99 maxgabinternetcallspeed <set|get> < " valid speed " > maxgabinternetcallspeed get Description This command se ts the maximum speed fo r Internet (IP/H.323) calls made from the Global Address Book. set Sets the maxim um speed for international calls ...

  • Polycom ViewStation EX - page 108

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 100 www .polycom.com maxgabisdncallspeed <set|get> < " valid speed " > maxgabisdncallspeed get Description This command set s the maximum speed for ISDN (H .320) calls made from the Global Address Book. set Sets the maximum spee d for ISDN calls when followed by a valid sp ...

  • Polycom ViewStation EX - page 109

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 101 maxtimeincall <set|get> [{0..99999}] maxtimeincall set [{0..99999}] maxtimeincall set maxtimeincall get Description This command set s the maximum number of minutes allowed for call length. When that time has expired in a call, you see a messag e asking you if yo ...

  • Polycom ViewStation EX - page 110

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 102 www .polycom.com mcupassword [{ " password " }] mcupassword Description This command sends th e MCU password when the MCU prompt s system for an MCU password. The Meeting Password can be configured as the multipoint MCU conference p assword. pa s s w o r d Alphanum eric string. V ...

  • Polycom ViewStation EX - page 111

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 103 meetingpassword <set|get> [ " password " ] meetingpassword set ["password"] meetingpassword set meetingpassword get Description This command set s the meeting password. set Sets the meeting passwor d when followe d by the pa s s w o r d parame ...

  • Polycom ViewStation EX - page 112

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 104 www .polycom.com mpautoanswer <yes|no|dono tdisturb|get> Description This command set s the Auto Answer Multipoint mode which determines how the sys tem will handle an incoming call in a multipoint videoconferen ce. yes If Auto Answer Multipoint is set to Ye s , any incoming call will ...

  • Polycom ViewStation EX - page 113

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 105 User Interface Screen Location System Info>Adm in Setup>Gener al Setup: Auto Answer Multip oint --or-- System Info>User Setu p: Auto Answer Multipoint mpmode <auto|discus sion|presentation| fullscreen|get> Description This command set s the multipoint co ...

  • Polycom ViewStation EX - page 114

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 106 www .polycom.com User Interface Screen Location System Info >User Setup: Multipo int Mode mute <near|far|re gister|unregister> mute near <on|off|toggle|get> mute far get mute register mute unregister Description This command sets the near or far site mute mode. It can also se ...

  • Polycom ViewStation EX - page 115

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 107 muteautoanswercalls <yes|no|get> Description This command sets the system to Mute Auto Answe r Calls mode. When this option is selected, the micropho ne pod is turned off to prevent the far site from hearing the near site wh en the system is in Auto Answer mode. ...

  • Polycom ViewStation EX - page 116

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 108 www .polycom.com off Disables the Ne ar End Loo p. Example nearloop on User Interface Screen Location System Info>Diagnostics>Near End Loop netmeetingi p <set|get> ["xxx.xxx .xxx.xxx"] netmeetingip set ["xxx.xxx.xxx.x xx"] netmeetingip set netmeetingip get De ...

  • Polycom ViewStation EX - page 117

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 109 netstats [{0..2}] netstats Description This command is used to get network st atistics for each call. 0..2 Range of selectable calls in a multipoint call (maximum number of concurrent calls=3, wher e 0 is call #1, 1 is call #2, and 2 is call #3). Select a number fr om ...

  • Polycom ViewStation EX - page 118

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 110 www .polycom.com tcp transmit comm protocol rcp receive comm protocol User Interface Screen Location System Info>Dia gnostics>Netwo rk S tats numdigitsdid <{0..24}|get> numdigitsdid <{0..24}> numdigitsdid get Description This command set s the number of digit s in the DID ...

  • Polycom ViewStation EX - page 119

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 111 numdigitsext <{0..24}|get> numdigitsext <{0..24}> numdigitsext get Description This comman d sets the number of digits in the Num ber+Extensio n Gateway number (E.164 dialing). Th e number of digits in that number is that portion of th e fu ll Number+Extens ...

  • Polycom ViewStation EX - page 120

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 112 www .polycom.com numberofmonitors <{1..4}|get> numberofmonitors <{1..4}> numberofmonitors get Description This command set s the number of TV monitors that are co nnected to the system. 1..4 Sets the number of monitors allowed. Maximum number is 4 for V iewS tation FX and VS4000 ...

  • Polycom ViewStation EX - page 121

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 113 Example outboundcallroute gateway User Interface Screen Location System Info>A dmin Setup>LAN /H.323>H.323>G atekeeper: Outbound Call Route pause <0..65535> Description This command causes th e command interpreter to pau se before executing the next c ...

  • Polycom ViewStation EX - page 122

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 114 www .polycom.com 100 100 Mbps auto duple x. 100hdx 100 Mbp s half duplex. 100fdx 100 Mbp s full duplex. get Displays the current setting. Example pcport 100fdx User Interface Screen Location System Info>A dmin Setup>LAN /H.323>LAN/In tranet> Advanced LAN Settings ping <ip_add ...

  • Polycom ViewStation EX - page 123

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 115 pip <on|off|auto|get> Description This command sets the on-screen PIP mode. The PIP feature allows the near site to adjust near-camer a views while in a videoconference. on Enables PIP mode.The system shows a PIP window which remains in the lower ri ght corner of ...

  • Polycom ViewStation EX - page 124

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 116 www .polycom.com switchnumber Sends th e Gateway Switch Number as the preferred alias. didextnumber Sends the DID Exte nsion Number as the preferred alias. extensio n Sends the H.323 Extension Number (E.164) as the preferred alias. get Displays the current setting ( isdnnumber , fulldidnumb ...

  • Polycom ViewStation EX - page 125

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 117 This command set s the presets or goes to presets for the near or far camera source. It can also register or unregister the T elnet or RS-232 session to give notification when the use r sets or goes to presets. Y ou can set and store up to ten preset ca mera positio ns ...

  • Polycom ViewStation EX - page 126

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 118 www .polycom.com ip Selects IP as the Primary Call T ype Choice. manual No call type is selected. get Displays the current setting ( isdn, ip , or manual ). Example primarycallchoice isdn User Interface Screen Location System Info> Admin Setup> Video Network>Call Prefer ences: Prim ...

  • Polycom ViewStation EX - page 127

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 119 queuecommands <yes|no|get> Description This command allows the system to que ue up commands that cannot be processed d uring call progress or p opup window states (that is, when the system is showing the call progress screen or is displaying a p opup window). Onc ...

  • Polycom ViewStation EX - page 128

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 120 www .polycom.com to the GAB, but does not app ear in the Global Address Bo ok of other systems. yes Enables this option (r egister this system). no Disables this option. get Displays the current setting ( yes or no ). Example registerthissystem yes User Interface Screen Location System Info ...

  • Polycom ViewStation EX - page 129

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 121 requireacctnumtod ial <yes|no|get> Description This command enables or disa bles the Require Account Number to Dial option. It is used to log calls to a specific account so that they can be tracked and billed to the ap propriate departments. When this option is s ...

  • Polycom ViewStation EX - page 130

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 122 www .polycom.com roomphonenumber <set|get> ["room phone number"] roomphonenumber set ["room phone number"] roomphonenumber set roomphonenumber get Description This command let s you enter the numb er of the phone that is lo cated in the same room as the system. set ...

  • Polycom ViewStation EX - page 131

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 123 rs232<mode|flowcontrol|baud|> Subcommands rs232 mode <passthru|control|get> rs232 flowcontrol <none|hardware|get> rs232 baud <1200| 24 00|9600|1440 0|19200|38400 | 57600|115200|get > Description This command configures and monitors the RS-232 po ...

  • Polycom ViewStation EX - page 132

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 124 www .polycom.com User Interface Screen Location System Info>Admin Setup>Sof tware/Hardware>RS-232 run < " scriptfilename " > Description This comman d loads a file from the fl ash file system and then executes the API commands contained in it. Each command needs to ...

  • Polycom ViewStation EX - page 133

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 125 speeddial Goes to the Speed Dial screen. disableui T urns of f the user interface. enableui Turns o n the user interface. chaircontrol Goes to the main Chair Control screen. sleep Causes the system to go into sleep mode. wake W akes up the syst em from sleep mode. Exam ...

  • Polycom ViewStation EX - page 134

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 126 www .polycom.com sendonlypreferredali as <yes|no|get> Description This command enables the optio n Send Only Preferred Alias. It allows you to select which E.164 alias to send to the gatekeeper . Any change forces a system reboot. yes Enables the option. no Disables the option. get Di ...

  • Polycom ViewStation EX - page 135

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 127 User Interface Screen Location System Info>Adm in Setup>Softwa re/Hardware>Software : System Serial Number setaccountnu mber < " account number " > Description This command set s the account number that is required for dialing out. The account ...

  • Polycom ViewStation EX - page 136

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 128 www .polycom.com both Displays both ISDN and IP numbers in the GAB. get Displays the current setting ( h 320 , h323 , or both ). Example showaddrsingab both User Interface Screen Location System Info> Admin Setup> LAN/H.323> Global Address> Preferences: Show Addr esses in Addres ...

  • Polycom ViewStation EX - page 137

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 129 sleep Description This command put s the system in sleep mode. T o wake the system, use the comma nd wake . Example sleep slides <thumbn ails|nex t|previous|first|last| resend|list|select|password|start|register| unregister> slides select <"pres"> ...

  • Polycom ViewStation EX - page 138

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 130 www .polycom.com list List all loaded presentations (displays names and IP addresse s) available for viewing. T he names are the na mes of the PCs from whic h the present ations are loaded. select < " pres " > Selects slide presen tation pres from the list by name. pres is g ...

  • Polycom ViewStation EX - page 139

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 131 3 Generates a snap shot from the near camera 3 (VCR). 4 Generates a snapshot from th e near camera 4 (auxiliary camera). register Registers the T elnet or RS-232 session to receive notifications about snap shots that are sent or received. unregister Unregisters the T e ...

  • Polycom ViewStation EX - page 140

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 132 www .polycom.com snapshottimeout <yes|no|get> Description This command enables or dis ables the Snapshot Timeout option. By default, all slides an d snapshots are displayed for a perio d of four minutes. When the display times out af ter four minutes, the system automatically returns ...

  • Polycom ViewStation EX - page 141

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 133 snmpadmin <set|get > ["admin name"] snmpadmin set ["admin_name"] snmpadmin set snmpadmin get Description This command set s the SNMP administrator name. set Sets the admin istrator name when followed by the admin name parameter . If you want t ...

  • Polycom ViewStation EX - page 142

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 134 www .polycom.com snmpcommunity <set|get> ["community name"] snmpcommunity set ["community name"] snmpcommunity set snmpcommunity get Description This command sets the SNMP community name. set Sets the SNMP community name when followed by the community name p aramet ...

  • Polycom ViewStation EX - page 143

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 135 snmpconsoleip <se t|get> ["xxx.xxx.xxx.xxx" ] snmpconsoleip set ["xx x.xxx.xxx.xxx "] snmpconsoleip set snmpconsoleip get Description This command sets the SNMP console IP address. set Sets the SNMP conso le IP address when followed by the xxx ...

  • Polycom ViewStation EX - page 144

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 136 www .polycom.com set Sets the SNMP location name when followed by the location na me paramet er . If you want to er ase the curren t setting, om it the paramete r . get Displays the current setting. location name SNMP location name. Note Use quot ation marks around a compound name or string ...

  • Polycom ViewStation EX - page 145

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 137 User Interface Screen Location System Info>Adm in Setup>Phon e /Audio: Sound Effect s V olume (select the Soun d Effect s V olume field. Adjust the volume setting by using the volume control buttons on the remote control). stdout <on|off> Description This c ...

  • Polycom ViewStation EX - page 146

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 138 www .polycom.com Note The Call T ype icon is only visible on the main user interfac e screen if you have previously enabled Allow S treaming (System Info>AdminSetup>LAN/H.323>S treaming: Allow S treaming) streamannounce <yes|no|get> Description This command e nables or disabl ...

  • Polycom ViewStation EX - page 147

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 139 streamaudioport <set|get> [ " stream audio port " ] streamaudioport set ["stream audio port"] streamaudioport set streamaudioport get Description This command set s the stream audio port. By default, the audio port is a fixed port. This may be ...

  • Polycom ViewStation EX - page 148

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 140 www .polycom.com streamenable <yes|no| get> Description This command enables or disable s streaming on the system. yes Enables st reaming. no Disables stre aming. get Displays the current setting ( yes or no ). Example streamenable yes User Interface Screen Location System Info>Ad ...

  • Polycom ViewStation EX - page 149

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 141 get Displays the current setting. ip address Multicast IP address. Example streammulticastip get User Interface Screen Location System Info> Admin Setup> LAN/H.323> S treaming: IP M ulticast Address streamrestoredefaults Description This command restores the s ...

  • Polycom ViewStation EX - page 150

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 142 www .polycom.com streamrouterhops <set|get> [ " number router hops " ] streamrouterhops set ["number router hops"] streamrouterhops set streamrouterhops get Description This command set s the number of routers you want the streaming video to pass thro ugh. This all ...

  • Polycom ViewStation EX - page 151

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 143 streamspeed <192|256|384|512|get> Description This command set s the speed of the video stream . 192 Sets the streamin g speed at 192 Kbps. 256 Sets the streamin g speed at 256 Kbps. 384 Sets the streamin g speed at 384 Kbps. 512 Sets the streamin g speed at 512 ...

  • Polycom ViewStation EX - page 152

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 144 www .polycom.com set Sets the stream video por t when followed by the video port parameter . If you want to erase the current setting, omit the parameter . get Displays the current setting. video port Vide o port number . Example streamvideoport 16386 User Interface Screen Location System I ...

  • Polycom ViewStation EX - page 153

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 145 systembehindnat <yes|no|get> Description This comman d sets the system behind a NA T (Network Addr ess T ranslation) device. Select this op tion if your system is behind a NA T device that is not H.323 aware. If your system is behind an H.323-aware NA T device, m ...

  • Polycom ViewStation EX - page 154

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 146 www .polycom.com systemna me <set| get> ["syst em name"] systemname set [ "system name"] systemname get Description This command set s the name of your system. The first character has to be a numeric (a digit) o r alphabetical (a letter) character including foreign ...

  • Polycom ViewStation EX - page 155

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 147 t120nameip <set|get> [" name or ip"] t120nameip set ["name or ip"] t120nameip set t120nameip get Description This command set s the t120 data conference name or IP address. The user is prompted for restart if this setting is changed. Note Data ...

  • Polycom ViewStation EX - page 156

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 148 www .polycom.com tcpports <set|get> [{1024..49150}] tcpports set [{1024..49150}] tcpports set tcpports get Description This command set s the TCP ports for Quality of Service on your system. set Sets the TCP ports when followed by a value from the range {1024..49150} . If y ou want to ...

  • Polycom ViewStation EX - page 157

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 149 phone num Phone number at which the user want s to be contacted. In order to obt ain rapid assistance, include the ar ea code with your phone number . Note Use quot ation marks around a compound name or strings containing sp aces (Ex: “united states” or “1 1 1 22 ...

  • Polycom ViewStation EX - page 158

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 150 www .polycom.com Note Use quot ation marks around a compound name or strings containing sp aces (Ex: “united states” or “1 1 1 222 333”). Example teleareacode set 703 User Interface Screen Location System Info> Admin Setup> Phone/Audio : Area Code telecountrycode <set|get & ...

  • Polycom ViewStation EX - page 159

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 151 telenumber <set |get> ["telephone number"] telenumber set ["telephone number"] telenumber set telenumber get Description This command sets the system’s telephone number . set Sets the telepho ne number when followed by the telephone number p ...

  • Polycom ViewStation EX - page 160

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 152 www .polycom.com testlan arp Description This command print s the ARP (Address Resolution Protocol) tab le contents. Example testlan arp testlan dcuinfo Description This command displays miscellaneous DC U information. Example testlan dcuinfo Output Sample DCUs for 0 = 2044 DCUs for 36 = 1 ...

  • Polycom ViewStation EX - page 161

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 153 testlan dns <name or ip> Description This command looks up a domain name or an IP address. name or ip Domain name or IP address. Example 1 testlan dns microsoft.com Output to Example 1 testlan: microsoft.com is 207.46.197.101 Example 2 testlan dns 216.115.108.243 ...

  • Polycom ViewStation EX - page 162

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 154 www .polycom.com from [length|mp s|rep s|wait|echoport|locapo rt]. To print an echo message showing only the default settings, omit the parameter . length Message length in bytes. mp s Number of me ssages per second. rep s Number of times to repeat the messa ge. wait Number of seconds to wa ...

  • Polycom ViewStation EX - page 163

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 155 testlan: waiting 100000us for next message testlan: sent=30, received=0, lost=30, delayed=0, corrupt=0 testlan: waiting 100000us for next message testlan: sent=40, received=0, lost=40, delayed=0, corrupt=0 testlan: waiting 100000us for next message testlan: sent=50, re ...

  • Polycom ViewStation EX - page 164

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 156 www .polycom.com textinput <"text to input"> Description This command inserts text into a user interface edit box that you have already selected using the remote control. text to input Alphanumeric string to be inserted into the selected edit box. Note Use quot ation marks a ...

  • Polycom ViewStation EX - page 165

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 157 User Interface Screen Location System Info> Admin Setup> LAN/H.323> Global Manag ement> Setup: Time Difference from GMT typeofservice <ipprece dence|diffserv|get> Description This command select s the type of service for Quality of Service . ippreced ...

  • Polycom ViewStation EX - page 166

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 158 www .polycom.com Description This command sets the system’s UDP ports. set Sets the UDP port s when followed by a value from the range {1024..49150} . If y ou want to erase the c urrent setting, omit the value. get Displays the current UDP port se tting. 1024..49150 Rang e of available UD ...

  • Polycom ViewStation EX - page 167

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 159 usegatekeeper <off|specify| auto|get> Description This command select s the gatekeeper mo de ( off, specify or au to ). After a change, the user is promp ted for system restart. Note A gatekeeper is not required to make IP-to-IP LAN calls. In these situat ions, s ...

  • Polycom ViewStation EX - page 168

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 160 www .polycom.com usepathnavigator <always|never|required| get> Description This command selects the PathNavi gator™ mode, if PathNavigator is used with the system. Because Pa thNavigator uses an MGC, it can handle videoconferen ces with more particip ants and higher speeds than a n ...

  • Polycom ViewStation EX - page 169

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 161 User Interface Screen Location System Info> Admin Setup> LAN/H.323> H.323>Gatekee per: Dial Multipoint Calls fr om PathNavigator? ...

  • Polycom ViewStation EX - page 170

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 162 www .polycom.com validateacctnum <yes|no|get> Description This command set s the validation for the GMS a ccount number that is used when dialing out. When the ca ll connects, the system verifies that the accou nt exists with the Glob al Managemen t System (GMS ) server . If the ac co ...

  • Polycom ViewStation EX - page 171

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 163 register Registers the T elnet or RS-232 session to receive notifications about V isual Concert FX events. unregister Unregisters the T elnet or RS-232 session to re ceive notifications about V isual Concert FX events. Example vcbutton play vcraudioout <yes|no|get&g ...

  • Polycom ViewStation EX - page 172

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 164 www .polycom.com vcrrecordsource <aut o|near|f ar|get> Description This command sets the VCR record source. auto Enables the VCR to automati cally record the current speaker in a point -to-point call. near Enables the VCR to record the near-site pr esentation. far Enables the VCR to r ...

  • Polycom ViewStation EX - page 173

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 165 User Interface Screen Location System Info: Sof tware V ersion vgahorizpos <left|right|get> Description This command is used to calibra te the VGA input in the horizontal position. lef t Sets the calibration frame to the lef t. right Sets the calibr ation frame t ...

  • Polycom ViewStation EX - page 174

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 166 www .polycom.com get Displays the current setting ( black or nosignal ) Example vgaoffmode nosignal User Interface Screen Location System Info>A dmin Setup>Video/Camer as>Monitors >Graphics Monitor>FX VGA>Setup: VGA Output with No Graphics vgaphase <increase|decrease|ge ...

  • Polycom ViewStation EX - page 175

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 167 vgaresolution <800x600|1024x768| 1280x1024|get> Description This command is used to set th e system’ s VGA output resolution. Select the maximum resolution that your monitor or projector can support. Consult the user man ual provided with the VGA monitor or pro ...

  • Polycom ViewStation EX - page 176

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 168 www .polycom.com down Moves the calibrati on frame down. get Displays the current setting ( up or do wn ). Example vgavertpos down User Interface Screen Location System Info>A dmin Setup>Video/ Cameras>VGA Input: V ertical Position This screen is only visible if a Vis ual Concert F ...

  • Polycom ViewStation EX - page 177

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 169 User Interface Screen Location Press the V olume UP or DOWN key on the remote control to see the audio level slider appear on scree n. waitfor <callcomplete|systemready| receivingcall> Description This command is useful within sc ript files (see th e run command ...

  • Polycom ViewStation EX - page 178

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 170 www .polycom.com wake Description This command wakes the sys tem from sleep mode. T o put the system in sleep mode, use the command sleep . Example wake wanipaddress <set|get> ["xxx.xxx.xxx.xxx"] wanipaddress set ["xxx.xxx.xxx.xxx"] wanipaddress set wanipaddress ge ...

  • Polycom ViewStation EX - page 179

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 171 whoami Description This command displays banner infor mation. Example display whoami Ouput Hi, my name is: Superman Here is what I know about myself: Serial Number: xxxxx Brand: Polycom Software Version: Release 5.0 FX - 14 Mar 2003 Model: VSFX4 Network Interface: PRI_ ...

  • Polycom ViewStation EX - page 180

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 172 www .polycom.com Note This option only works between Vi ewSt ation EX, ViewS tation FX, or VS4000 syste ms with software version 4.0 and higher . Otherwise, if one of the systems has a software version older tha n 4.0, the propr ietary letter box format is supported. yes Enables wide screen ...

  • Polycom ViewStation EX - page 181

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 173 winsserver <set|get > ["xxx.xxx.xxx.xxx"] winsserver set ["xxx.xxx.x xx.xxx"] winsserver set winsserver get Description This command sets the WINS serv er . After a change is made, the system prompts th e user for restart. set Sets the WINS se ...

  • Polycom ViewStation EX - page 182

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 174 www .polycom.com ISDN BRI Commands The following commands are sp ecif ic to the ISDN BRI network interface. isdnareacode <set|g et> ["area code"] isdnareacode set ["area code"] isdnareacode set isdnareacode get Description This command set s the ISDN area code or S ...

  • Polycom ViewStation EX - page 183

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 175 isdncountrycode <set|get> ["country code"] isdncountrycode set ["country c ode"] isdncount rycode set isdncount rycode get Description This command set s the ISDN country code associated with the country where the system is used. The system is ...

  • Polycom ViewStation EX - page 184

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 176 www .polycom.com isdndialingprefix <set|g et> ["isdn prefix"] isdndialingprefix set ["isdn prefix"] isdndialingprefix set isdndialingprefix get Description This command sets the ISDN di aling prefix used to access an outside line if the system is behind a PBX. set ...

  • Polycom ViewStation EX - page 185

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 177 isdndialspeed <set|get> <"valid speed"> <on|off> isdndialspeed set <"valid speed"> <on|off> isdndialspeed get <"valid speed"> Description This command enables or disable s the ISDN dialing speed valid sp ...

  • Polycom ViewStation EX - page 186

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 178 www .polycom.com isdnnum <set|get><1b1|1b2|2b1|2b2|3b1| 3b2|4b1|4b2> ["isdn number"] isdnnum set <1b1|1b2|2b1 |2b2|3b1|3b2|4b1|4b2> ["isdn number"] isdnnum set <1b1|1b2|2b1 |2b2|3b1|3b2|4b1|4b2> isdnnum get <1b1|1b2|2b1 |2b2|3b1|3b2|4b1|4b2> ...

  • Polycom ViewStation EX - page 187

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 179 spidnum <set|get><1b1|1b2|2b1|2b2|3b1| 3b2|4b1|4b2> ["spid number"] spidnum set <1b 1|1b2|2b1 |2b2|3b1|3b2|4b1|4b2> ["spid number"] spidnum set <1b 1|1b2|2b1 |2b2|3b1|3b2|4b1|4b2> spidnum get <1b1|1b2|2b1 |2b2|3b1|3b2|4b1| ...

  • Polycom ViewStation EX - page 188

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 180 www .polycom.com ISDN PRI Commands The following commands are sp ecif ic to the ISDN PRI network interface. priareacode <set|get> [ " area code " ] priareacode set ["area code"] priareacode set priareacode get Description This command sets the PRI area code. set Se ...

  • Polycom ViewStation EX - page 189

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 181 pricallbycall <set|get> [{0..31}] pricallbycall set [{0..31}] pricallbycall set pricallbycall get Description This command sets the PRI area cod e. Call-by-call is a number from 1 to 31, wh ich is optionally sent to an upstre am telephone compa ny switch, if req ...

  • Polycom ViewStation EX - page 190

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 182 www .polycom.com prichannel <set|get> <all|{1..<23|30>}> <on|off> prichannel set all <on|off> prichannel set <{1..23}> <on|off> prichannel set <{1..30}> <on|off> prichannel set prichannel get all <on|off> prichannel get <{1..23} ...

  • Polycom ViewStation EX - page 191

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 183 Example 2 prichannel set Example 3 prichannel get 3 User Interface Screen Location System Info>A dmin Setup>Vid eo Network>IMUX>PRI Network> PRI S tatus This screen is only accessible if you have a PRI network inte rface connected to your V iewS tation F ...

  • Polycom ViewStation EX - page 192

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 184 www .polycom.com 17-31. But the PRI Status scre en numbers these channels contiguously in the range 1- 30. Therefore, on the PRI S tatus screen, channels 1-15 control th e status of timeslots 1 -15, and channels 16-30 control th e status of timeslots 17 -31 . pricsu <internal|external|ge ...

  • Polycom ViewStation EX - page 193

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 185 pridialchannels <set |get> <{1..12|15}> pridialchannels set <{1..12}> pridialchannels set <{1..15}> pridialchannels set pridialchannels get Description This command set s the number of PRI channels to dial in parallel. By default, ISDN channels ...

  • Polycom ViewStation EX - page 194

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 186 www .polycom.com priintlprefix <set|get> [ " prefix " ] priintlprefix set ["prefix"] priintlprefix set priintlprefix get Description This command set s the PRI international dialing prefix.The international prefix defa ults to 01 1 for North America and 00 for Euro ...

  • Polycom ViewStation EX - page 195

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 187 prilinebuildout <set|get><0|-7.5|- 15|-22.5>| <0-133|134-266|267-399|400-533|534-665> prilinebuildout set <0|-7.5|-15|-22.5> prilinebuildout set <0-1 33|134-266|267-399| 400-533|534-6 65> prilinebuildout get Description This command set s ...

  • Polycom ViewStation EX - page 196

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 188 www .polycom.com prilinesignal <set|get>< esf/b8zs|crc4/hdb3| hdb3> prilinesignal set <esf/b8zs|crc4/hdb3|hdb 3> prilinesignal get Description This command sets the PRI line signal. set Sets the PRI line signal. It requir es a parameter from <esf/b8zs|crc4/hdb3|hdb3 > ...

  • Polycom ViewStation EX - page 197

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 189 prinumber <set|get> [ " pri number " ] prinumber set ["pri number"] prinumber set prinumber get Description This command set s the PRI video number . set Sets the PRI video numb er when followed by the par ameter pri number . If you want to er ...

  • Polycom ViewStation EX - page 198

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 190 www .polycom.com prinumberingplan <isdn| unknown|get> Description This command set s the PRI numbering plan. isdn With isdn , the numbering plan is identified to the upstream switch as ISDN, an d the number type, which is either national or internationa l, is determined from the diale ...

  • Polycom ViewStation EX - page 199

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 191 prioutsidelin e <set|get> [ " outside_line " ] prioutsideline set ["outside_line"] prioutsideline set prioutsideline get Description This command sets the PRI number th at is dialed f or outside line access. This number is needed if your syste ...

  • Polycom ViewStation EX - page 200

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 192 www .polycom.com priswitch <set|get> <att5ess|att4ess| norteldms|ni2|net5/ctr4> priswitch set <att5ess| att4ess|norteldms|ni2| net5/ctr4> priswitch get Description This command sets the PRI switch. If more th an one switch pr otocol is supported, you must fin d out fr om y ...

  • Polycom ViewStation EX - page 201

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 193 V .35/RS-449/RS-530/RS-366 Commands The following commands are sp ecific to the V .35/RS-449/RS-530/ RS-366 networ k interfac e. cts <normal|inverted|get> Description This command let s you configure the cts serial interface control signal (clear to send). The de ...

  • Polycom ViewStation EX - page 202

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 194 www .polycom.com inverted Set s the signal to inverted (low volt age is logic 1). get Displays the current setting ( normal or inverted ). Example dcd inverted User Interface Screen Location System Info> Admin Setup> Video Network>Advanc ed V .3 5: DCD This screen is only accessibl ...

  • Polycom ViewStation EX - page 203

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 195 dsr <normal|inverted|get> Description This command let s you configure the dsr serial interface contr ol signal (data set rea dy). The default setting for this signal is normal . normal Sets the signa l to normal (high voltage is logic 1). inverted Set s the sign ...

  • Polycom ViewStation EX - page 204

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 196 www .polycom.com Example dsranswer on User Interface Screen Location System Info> Admin Setup> Video Network>Advanc ed V .3 5: DSR>Answer This screen is only accessible if you have a V .35/RS-449/RS-530/RS-366 network interface connected to your system. dtr <normal|inverted|o ...

  • Polycom ViewStation EX - page 205

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 197 h331audiomode <g728|g711u|g711a|g722-56 | g722-48|off|get> Description This command set s the H.331 audio protocol for tr ansmitting audio in broadcast mode. Broadcast configura tion parameters should be set to accommodate the lowest common den ominator of the sy ...

  • Polycom ViewStation EX - page 206

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 198 www .polycom.com User Interface Screen Location System Info>Admin Setup>V ideo Network>Video Ne twork> Broadcast Mode Setup : Audio Mode This screen is only accessible if you have a V .35/RS-449/RS-530/RS-366 network interface connected to your system. h331framerate <30|15|10 ...

  • Polycom ViewStation EX - page 207

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 199 h331videoprotocol <h263|h261|get> Description This command set s the H.331 video protocol for the broadcast transmission. Broadcast configuration p arameters should be set to accommoda te the lowe st common denominato r of the sys tems which are receiving the bro ...

  • Polycom ViewStation EX - page 208

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 200 www .polycom.com fcif Full Common Interchange Format ( 352 x 288 resolution). get Displays the current setting. Example h331videoformat fcif User Interface Screen Location System Info>Admin Setup>V ideo Network>Video Ne twork> Broadcast Mode Setup : Video Format This screen is o ...

  • Polycom ViewStation EX - page 209

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 201 rt <normal|inverted|get> Description This command let s you configure the rt serial interface control signal (receive timing: clock). The defa ult setting for this signal is normal . normal Sets the signa l to normal (rising edge receives data). inverted Sets the ...

  • Polycom ViewStation EX - page 210

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 202 www .polycom.com Example rts normal User Interface Screen Location System Info> Admin Setup> Video Network>Advanc ed V .3 5: RTS This screen is only accessible if you have a V .35/RS-449/RS-530/RS-366 network interface connected to your system. st <norma l|inverted| get> Desc ...

  • Polycom ViewStation EX - page 211

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 203 v35broadcastmode <on|off|get> Description This comman d sets H.331 broa dcast mode f or transmiss ions via satellite. on Enables broadcast mo de. off Disables broadcast mode. get Displays the current setting ( on or off ). Example v35broadcastmode on User Interfa ...

  • Polycom ViewStation EX - page 212

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 204 www .polycom.com v35dialingprotocol <rs366|get> Description This command select s the V .35/RS-449/RS-530/RS-366 dialing protocol. Selecting a dialing pr otocol is no t needed if you are using your DCE to dial the call or if you have a dedicated connection to the far site. rs366 Enabl ...

  • Polycom ViewStation EX - page 213

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 205 nomenclature of the user interf ace and the command isdnnum (see page 178 ). set <1b1|1b2> Set s the ISDN video number for a B channel line when followed by a v35 number p arameter . If you want to erase the current setting, omit the par am et e r . get <1b1|1 ...

  • Polycom ViewStation EX - page 214

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 206 www .polycom.com Example v35portsused 1+2 User Interface Screen Location System Info>Admin Setup>V ideo Network>Vide o Network: V .35 Ports Used This screen is only accessible if you have a V .35/RS-449/RS-530/RS-366 network interface connected to your system. v35prefix <set|get ...

  • Polycom ViewStation EX - page 215

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 207 value V .35/RS-449/RS-530/RS-366 prefix. The prefix is a function of your DCE. P lease consult the DCE user guide for additio nal information. get < " valid speed " > Displays the current setting for valid spee d . Note The ViewS tation EX system suppor ...

  • Polycom ViewStation EX - page 216

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 208 www .polycom.com V .35/RS-449/RS-530/RS-366 p rofiles (equipment/manufacture r) available. Consult your DCE user guide for additional informatio n on setting dialing profiles. get Displays the current profile. view Displays all the settings (speed, prefix or suf fix) of the current prof ile ...

  • Polycom ViewStation EX - page 217

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide © Polycom, Inc. 2003 209 System Info>Admin Setup>V ideo Network>Video Ne twork> Advanced Dialing This screen is only accessible if you have a V .35/RS-449/RS-530/ RS-366 network interface connected to your system. v35suffix <set|get> < " valid speed " > [ &quo ...

  • Polycom ViewStation EX - page 218

    ViewStation EX, V iewStation FX, and VS4000 A PI Guide 210 www .polycom.com Example v35suffix set 128 ”#4#2” This command associa tes the dialing suffix #4#2 to th e speed 128. User Interface Screen Location System Info>Admin Setup>V ideo Network>Video Ne twork> Advanced Dialing This screen is only accessible if you have a V .35/RS- ...

  • Polycom ViewStation EX - page 219

    © Polycom, Inc. 2003 211 Safety and Legal Notices Important Safeguards Read and un derstand the following instruct ions before using the system: • Close supervision is necessary when the system is used by or near chil dren. Do not leave unattended while in use . • Only use electrical extension co rds with a current rating at le ast equal to th ...

  • Polycom ViewStation EX - page 220

    ViewStation EX, V iewStation FX, and VS4000 API Guide 212 www .polycom.com Warranty Polycom, Inc. warrants its produc ts to be free of de fects in ma te ria ls an d fa ct ory workma nsh ip for a period of tw elve (12) months from date of purchase. This warranty do es not apply to damage to products resu lting fro m a cciden t, misu se, se rvice or ...

  • Polycom ViewStation EX - page 221

    Safety and Legal Notices © Polycom, Inc. 2003 213 Part 68 FCC Rules This equipment co mplies with Part 68 of the FCC rule s. On the label of th is equipment is a label that contains, amo ng ot he r info rmation , t he FCC reg istratio n num be r an d rin ger e qui valen ce number (REN) for th is eq uip men t. If r eq ue sted , this info rmat ion m ...

  • Polycom ViewStation EX - page 222

    ViewStation EX, V iewStation FX, and VS4000 API Guide 214 www .polycom.com The Ringer Equivalence Number (REN) assigned to each relevant terminal device provid es an indication of t he maximum numbe r of terminals allowe d to be connecte d to a telephone in terface. The terminat ion on an in te rf ace ma y cons ist o f any com bina tio n o f device ...

  • Polycom ViewStation EX - page 223

    Safety and Legal Notices © Polycom, Inc. 2003 215 Dichiarazione di conformità: Con la presen te Po lyco m Ltd . dichia ra ch e il ViewStation EX/FX/V S4000 soddisfa i requisiti essenziali e le altre d ispo sizioni p ertinen ti d ella direttiva 19 99/5/ CE. Verklaring van overeenstemming: Hierbij verklaart Polycom Lt d. dat dien s Vie wS tat ion E ...

  • Polycom ViewStation EX - page 224

    ViewStation EX, V iewStation FX, and VS4000 API Guide 216 www .polycom.com Underwriters Laboratories Statement The system is intended to be powered only by the su pplied power supply unit. Special Safety Instructions Follow existing safe ty instructions and observe all safeguar ds as directed. Installation Instructions Installation must be pe rform ...

Manufacturer Polycom Category Microscope & Magnifier

Documents that we receive from a manufacturer of a Polycom ViewStation EX can be divided into several groups. They are, among others:
- Polycom technical drawings
- ViewStation EX manuals
- Polycom product data sheets
- information booklets
- or energy labels Polycom ViewStation EX
All of them are important, but the most important information from the point of view of use of the device are in the user manual Polycom ViewStation EX.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Polycom ViewStation EX, service manual, brief instructions and user manuals Polycom ViewStation EX. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Polycom ViewStation EX.

A complete manual for the device Polycom ViewStation EX, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Polycom ViewStation EX by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Polycom ViewStation EX.

A complete Polycom manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Polycom ViewStation EX - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Polycom ViewStation EX, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Polycom ViewStation EX, that we can find in the current document
3. Tips how to use the basic functions of the device Polycom ViewStation EX - which should help us in our first steps of using Polycom ViewStation EX
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Polycom ViewStation EX
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Polycom ViewStation EX in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Polycom ViewStation EX?

Use the form below

If you did not solve your problem by using a manual Polycom ViewStation EX, ask a question using the form below. If a user had a similar problem with Polycom ViewStation EX it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)