Manual SMC Networks 1000BASE-X

178 pages 1.27 mb
Download

Go to site of 178

Summary
  • SMC Networks 1000BASE-X - page 1

    Stackable F ast Ether net Switch ◆ 24 100B ASE-FX MT -RJ ports ◆ Optional 100B ASE-FX or 1000B ASE-X modules ◆ Optional stack module for linking up to four units ◆ 8.8 Gbps of aggreg ate switch bandwidth ◆ Support for redu ndant po wer unit ◆ Up to f i ve port trunks per switch ◆ Port mirroring for non-intrusi v e analysis ◆ QoS sup ...

  • SMC Networks 1000BASE-X - page 2

    ...

  • SMC Networks 1000BASE-X - page 3

    38 T esla Irvine, CA 92618 Phone: (949) 679 -8000 T igerStack 100 Management Guide From SMC’ s Tiger line of feature-rich workgroup LAN solutions November 2002 Pub. # F2.47 150200025700A R01 ...

  • SMC Networks 1000BASE-X - page 4

    Infor mation fur nished by SMC Netw orks, Inc . (SMC) is believ ed to be accurate and reliable. Ho wev er, no re sponsibility is assumed by SMC for its use, nor for any infringements of patents or o ther rights of third parties which may result from its use . No license is g ranted by implication or otherwise under any patent or patent ri ghts of S ...

  • SMC Networks 1000BASE-X - page 5

    i L IMITED W ARRANTY Limited W ar ranty Statement : SMC Networks , Inc. (“SMC”) warrants its products to be free from defects in workma nship and materials , under nor mal use and ser vice, for the applicable warranty ter m. All SMC products car r y a standard 90-day limited warranty from the date of purchase from SMC or its Authoriz ed Reselle ...

  • SMC Networks 1000BASE-X - page 6

    L IMITED W AR RANTY ii LIABILITY IN CONNECTION WITH THE SALE, INSTALLA TION , MAINTENANCE OR USE OF ITS PROD UCTS . SMC SHALL NOT BE LIABLE UNDER THIS W ARRANTY IF ITS TESTING AND EXAMINA TION DISCLOSE THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR W AS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON ’S MISUSE, NEGLECT , IMPROPER INSTALLA TION OR ...

  • SMC Networks 1000BASE-X - page 7

    iii T ABLE OF C ONTENTS 1 Switch Management . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Configurati on Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Factory Defau lts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Required Connections . . . . . . ...

  • SMC Networks 1000BASE-X - page 8

    T ABLE OF C ONTENTS iv Using a Mirror Port for Ana lysis . . . . . . . . . . . . . . . . . . . . . . . . 2-44 Configuring Port Trunks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-45 IGMP Multicast Filtering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-48 Configuring IGMP . . . . . . . . . . . . . . . . . . . . . . ...

  • SMC Networks 1000BASE-X - page 9

    T ABLE OF C ONTENTS v Expansion Slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10 IP Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11 SNMP Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13 SNMP Communi ty . . . . ...

  • SMC Networks 1000BASE-X - page 10

    T ABLE OF C ONTENTS vi Configuring IGMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-43 IP Multicast Reg istration Table . . . . . . . . . . . . . . . . . . . . . . . . . 3-44 Port Menu s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-45 Port Information . . . . . . . . . . ...

  • SMC Networks 1000BASE-X - page 11

    T ABLE OF C ONTENTS vii B Pin Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1 Console Port Pin A ssignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1 DB-9 Port Pin Assignme nts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B -1 Console Port to 9-Pin CO M Port on PC . . . . . . . . . . ...

  • SMC Networks 1000BASE-X - page 12

    T ABLE OF C ONTENTS viii ...

  • SMC Networks 1000BASE-X - page 13

    1-1 C HAPTER 1 S WITCH M ANAGEMENT Configuration Options F or advanced manag ement capability , the Tige rStack 100 management agent provides a menu-dri ven system configuration program. This prog ram can be accessed by a direct or modem connection to the serial port on the rear panel (out-of-band), or by a T elnet connection over the network (in-b ...

  • SMC Networks 1000BASE-X - page 14

    S WITCH M ANAGEMENT 1-2 Required Connections Console Port (Out-of-Band) Connections Attach a VT100 compatible terminal or a PC r unning a ter minal emulation prog ram to the serial port on the swit ch’ s rear panel. Use the null-modem cable provided with this package, or use a n ull modem connection that complies with the wiring assignments sh o ...

  • SMC Networks 1000BASE-X - page 15

    R EQUIR ED C ONNECTIONS 1-3 In-Band Connections Prior to accessing the Network Ma nagement Module via a network connection, you must first configure it with a v alid IP address , subnet mask, and default gateway using an out-of-band connection or the BOOTP protocol. After configuring the switch’ s IP pa rameters , you can access the on-board conf ...

  • SMC Networks 1000BASE-X - page 16

    S WITCH M ANAGEMENT 1-4 Factory Defaults The default settings for switch configuration parameters . Each parameter can be changed via the console menus or T elnet. Parameter Default Value System Configuration Management VLAN All IP State USER-CONFIG IP Address 10.1.0.1 NetMark 255.255.0.0 Default Gateway Null User Names admin, guest Password <no ...

  • SMC Networks 1000BASE-X - page 17

    F ACTOR Y D EFAULTS 1-5 Path Cost 4 - 1000Mbps ports 19 - 100Mbps ports 100 - 10Mbps ports Port Priority 128 Spanning Tre e Protocol Enabled Spanning Tree Fast Forwarding 10/100 Mbps ports Enabled Virtual LANs Acceptable VL AN Frame Type All Configurable PVID Tagging Yes Untagged VLAN Grou p Assignment 1 VLAN Ingress Filtering False VLAN Learning S ...

  • SMC Networks 1000BASE-X - page 18

    S WITCH M ANAGEMENT 1-6 ...

  • SMC Networks 1000BASE-X - page 19

    2-1 C HAPTER 2 U SING THE S YSTEM C ONFIGURATION P ROGRAM Login Screen Once a direct connection to the seri al port or a T elnet connection is established, the login screen for the on-board configuration prog ram appears as shown below . If this is y our first time t o log in to the configuration program, then the default user names are “admin” ...

  • SMC Networks 1000BASE-X - page 20

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-2 Y ou should define a new administrator password, record it and put it in a safe place. Select Console Login Conf iguration from the Management Setup Menu and enter a new password for the administrator . Note that passwords can consist of up to 11 alphanumeric characters and are not case sensitiv e. N ...

  • SMC Networks 1000BASE-X - page 21

    M AIN M ENU 2-3 Main Menu With the system configuration progra m you can define sy stem paramete rs , manage and control the switch, the c onnected stack and all its ports , or monitor network conditions . The figure below of the Main Menu and the following table briefly describe the se lections av ailable from this prog ram. Note: Options for the ...

  • SMC Networks 1000BASE-X - page 22

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-4 Management Setup Menu Network Configuration Includes IP setup, Ping fac ility, HTTP (Web agent) setup, Te lnet conf igur ation, and MAC address. Serial Port Configuration Sets communic ation parameters f o r the serial port, including manag ement mode, baud rate , console time-out, and screen da ta r ...

  • SMC Networks 1000BASE-X - page 23

    M AIN M ENU 2-5 BStorm Control Configuration Allows you to enable/disable broadc ast storm control on a per-po rt basis and set the packet-per-s econd threshold. Extended Bridge Configuration Displays/configure s extended bridge capabiliti es provided by this switch. 802.1P Configu ration Configures default po rt priorities and queue assignments. 8 ...

  • SMC Networks 1000BASE-X - page 24

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-6 Static Unicast Address Table Configuration Used to manually configure host MAC addre sses in the unicast table. Static Multicast Address Table Configuration* Used to manually configure host MAC addre sses in the multicast table. Restart System Restarts system with op tions to use POST, or to retain f ...

  • SMC Networks 1000BASE-X - page 25

    S YSTEM I NFOR MATION M ENU 2-7 System Information Menu Use the System Infor mation Men u to display a basic description of the switch, including contact infor mati on, and hardware/firmware versions . System Information Menu ======================= System Information ... Switch Information ... <OK> Use <TAB> or arrow keys to move. < ...

  • SMC Networks 1000BASE-X - page 26

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-8 Displaying System Information Use the System Infor mation screen to display descriptive infor mation about the switch, or for quic k syst em identi fication as sho wn in the following figure and table . System Information ================== System Description : TigerStack 100 SMC 6924MT System Object ...

  • SMC Networks 1000BASE-X - page 27

    S YSTEM I NFOR MATION M ENU 2-9 Displaying Switch Version Information Use the Switch Information screen to display hardware/firmware version numbers for th e main board, as well as the power status . Switch Information : Unit 1 ================== Main Board Hardware Version : V5.0 Firmware Version : V1.21 Serial Number : 00-CB-00-00-00-00 Port Numb ...

  • SMC Networks 1000BASE-X - page 28

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-10 Expansion Slot 2 Shows module t ype if inserted: 100BASE-FX (MMF or SMF), 1000BASE-SX, 1000BASE-LX, 1000BASE-T, or Stacking. Agent Module Hardware Version Hardware ve rsion of the agent mo dule. POST ROM Version Power-On Self-Test versio n number. Firmware Version Firmware ve rsion of the ag ent mod ...

  • SMC Networks 1000BASE-X - page 29

    M ANAGEMENT S ETUP M ENU 2-11 Management Setup Menu After initially log ging onto the sy stem, adjust the communication parameters for your console to ensu re a reliable connection (Serial Port Configuration). Specify the IP addresses for the switch (Netw ork Configuration / IP Configuration), and then set the Administrator and User passw ords (Con ...

  • SMC Networks 1000BASE-X - page 30

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-12 Changing the Network Configuration Use the Netw ork Configuration menu to set the bootup option, configure the switch’ s Inter net Protocol (IP) parameters, enable the on-board W eb agent, or to set the number of conc urrent T elnet sessions allowed. The screen shown belo w is described in the fol ...

  • SMC Networks 1000BASE-X - page 31

    M ANAGEMENT S ETUP M ENU 2-13 IP Configuration Use the IP Configuration screen to se t the bootup option, or configure the switch’ s IP parameters . The screen shown below is described in the following table . Network Configuration : IP Configuration ======================================== Interface Type : Ethernet IP Address : 10.1.113.29 Subne ...

  • SMC Networks 1000BASE-X - page 32

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-14 Default Gateway Gateway used to pass tra p messages from the system’s agen t to the management station . Note that the gateway must be defined if the management statio n is located in a different IP segment. The default value is null. IP State Specifies whether IP func tionality is enabled via man ...

  • SMC Networks 1000BASE-X - page 33

    M ANAGEMENT S ETUP M ENU 2-15 IP Connectivity Test (Ping) Use the IP Connecti vity T est to see if another site on the Internet can be reached. The screen shown belo w is described in the follo wing table. Network Configuration : IP Connectivit y Test (Ping) ====================================== ============= IP Address : Test Times : 1 Interval : ...

  • SMC Networks 1000BASE-X - page 34

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-16 HTTP Configuration Use the HTTP Configuration screen to enable/disable the on-board W eb agent, and to specify the TCP port th at will provide HTTP ser vice. The screen shown belo w is described in the follo wing table. Network Configuration : HTTP Configuration ===================================== ...

  • SMC Networks 1000BASE-X - page 35

    M ANAGEMENT S ETUP M ENU 2-17 Configuring the Serial Port Y ou can access the on-board configur ation prog ram by attac hing a VT100 compatible device to the switch’ s serial por t. (F or more infor mation on connecting to this port, see “Requi red Connections” on page 1-2.) The communication parameters fo r this por t can be accessed from th ...

  • SMC Networks 1000BASE-X - page 36

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-18 Parity None Sets the parity of the RS-232 port. Options : no ne/odd/even Time-Out 10 minutes If no input is re ceived fro m the attached device after this interval, th e current session is automaticall y closed. Range : 0 - 100 minu tes; where 0 indicates disabled Auto Refresh 5 seconds Sets the int ...

  • SMC Networks 1000BASE-X - page 37

    M ANAGEMENT S ETUP M ENU 2-19 Assigning SNMP Parameters Use the SNMP Configuration screen to displa y and modify parameters for the Simple Network Management Prot ocol (SNMP). The switch includes an on-board SNMP agent which monitors the status of its hardw are, as well as the traffic passing throug h its por ts . A computer attached to the network ...

  • SMC Networks 1000BASE-X - page 38

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-20 Configuring Community Names The following figure and table descri be how to configure the community strings authorized for management ac cess. Up to 5 community names may be entered. Note: The default comm unity string is “ public” with Re ad/Write acce ss. SNMP Configuration : SNMP Communities ...

  • SMC Networks 1000BASE-X - page 39

    M ANAGEMENT S ETUP M ENU 2-21 Configuring IP Trap Managers The following figure and table desc ribe how to specify management stations that will receive authentica tion failure messages or other trap messages from the switch. Up to 5 trap managers may be entered. SNMP Configuration : IP Trap Managers ===================================== IP Address ...

  • SMC Networks 1000BASE-X - page 40

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-22 Console Login Configuration Use the Management Setu p: Console Login Config uration to restrict management access based on specified user names and passwords , or to set the inv alid passw ord threshold and time-out. There are only t wo us er types defined, ADMIN (Administrator) and GUEST , but you ...

  • SMC Networks 1000BASE-X - page 41

    M ANAGEMENT S ETUP M ENU 2-23 Parameter Default Description Password Threshold 3 Sets the password intrusion thresho ld which limits the number of failed logon attempts. Range : 0~65535 Lock-out Tim e 0 The time (in seconds) the manage ment console will be disabled du e to an excessive nu mber of failed logon attempts. Range : 0~65535 (0 indicates ...

  • SMC Networks 1000BASE-X - page 42

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-24 Downloading System Software Using TFTP to Download Over the Network Use the TFTP Do wnload menu to lo ad softw are updates into the switch. The download file should be an SMC6924MT binar y file from SMC; otherwise the ag ent will not acce pt it. The success of the download operation depends on the a ...

  • SMC Networks 1000BASE-X - page 43

    M ANAGEMENT S ETUP M ENU 2-25 Saving the System Configuration Use the Configuration Sav e & Restore menu to sa ve the switc h configuration settings to a file on a TFTP server . The file can be later downloaded to the switc h to restore the switch’ s settings. The success of the operation depends on the accessibility of the TFTP ser ver and t ...

  • SMC Networks 1000BASE-X - page 44

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-26 Configuration Download Download Server IP IP a ddress of a TFTP server. Download Filename The name of the file that contains the switch configuration settings you wish to res tore. [Process TFTP Download] Issues a request to the TFTP server to download the specifie d file. Download Status Indicates ...

  • SMC Networks 1000BASE-X - page 45

    M ANAGEMENT S ETUP M ENU 2-27 Configuring Management Access Use the Management Configuration menu to define whic h VLAN has management access to the switch. P a rameters shown on this screen are indicated in the following figure and table. Management Configuration ========================= Management VLAN : ALL VLAN : 1 <APPLY> <OK> < ...

  • SMC Networks 1000BASE-X - page 46

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-28 Configuring the Switch The Device Control menu is used to control a broad range of functions, including port configurat ion, Spanning T ree, por t mirroring, multicast filtering, and Vir tual LANs . Each of the setup screens provided by these configuration menus is described in the following section ...

  • SMC Networks 1000BASE-X - page 47

    C ONFIGURING THE S WITCH 2-29 Extended Bridge Configuration Displays/configure s extended bridge capabiliti es provided by this switch. 802.1P Configu ration Configures default port priorities an d queue assignments. 802.1Q VLAN Base Information Displays b asic VLAN in fo rmation, such as VLAN version number and maximum VLANs supported. 802.1Q VLAN ...

  • SMC Networks 1000BASE-X - page 48

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-30 Configuring Port Parameters Use the P or t Configuration menus to set or display commun ication parameters for any por t or module in the stac k. Port Configuration : Unit 1 Port 1 - 12 ================== Flow Control on all ports : [Enable] [D isable] Port Type Admin Flow Control Speed and Duplex - ...

  • SMC Networks 1000BASE-X - page 49

    C ONFIGURING THE S WITCH 2-31 Note: MT-RJ ports operate at 100 Mbps and support full- and half-dup lex mode. 100B ASE-FX module ports operate at 100 Mbps, full-duplex only. 1000BASE-SX and 1000BASE-LX ports are fixed at 1000 Mbps, but auto-negotiate duplex mode and flow control. 1000BASE-T ports auto -negotiate speed (1000/100/10 Mbps), duplex mode ...

  • SMC Networks 1000BASE-X - page 50

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-32 Viewing the Current Port Configuration The Port Infor mation screen displays the port type, status , link state, and flow control in use, as well as the communication speed and duplex mode. T o change any of the por t settings , use the P ort Configuration menu. Port Information : Unit 1 Port 1 - 12 ...

  • SMC Networks 1000BASE-X - page 51

    C ONFIGURING THE S WITCH 2-33 FlowControl InUse S hows the flow con trol type in use. Flow control can eliminate frame loss by “blockin g” traffic from end stations connecte d directly to the switch. Back pressure is used for hal f duplex and IEE E 802.3x for full duplex . Note that flow co ntrol should no t be used if a port is connecte d to a ...

  • SMC Networks 1000BASE-X - page 52

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-34 Using the Spanning Tree Algorithm The Spanning T ree Alg orithm can be us ed to detect and disable netw ork loops , and to provide backup links be tween switc hes , bridges or routers. This allows the switch to interact with other brid ging devices (that is, an STA-compliant switch, bridg e or route ...

  • SMC Networks 1000BASE-X - page 53

    C ONFIGURING THE S WITCH 2-35 Parameter Default Description Spanning Tree Protocol Enabled Enable this pa rameter to participat e in a STA compliant netwo rk. Priority 32,768 Device priority is used in selectin g the root device, root port, and desi gnated port. The device with the highest priorit y becomes the STA root devic e. However, if all dev ...

  • SMC Networks 1000BASE-X - page 54

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-36 Max (Message) Age 20 The maximum time (in seconds) a device can wait without receivi ng a configuration mess age before attempting to reconfigure. All device ports (except for designated ports) shou ld receive conf iguration messages at regular interval s. Any port that ages out STA information (pro ...

  • SMC Networks 1000BASE-X - page 55

    C ONFIGURING THE S WITCH 2-37 Configuring STA for Ports The following figure and table de scribe port STA configuration. Spanning Tree Port Configuration : Unit 1 Port 1 - 12 ================================ Fast forwarding on all ports : [Enable] [Disable] Port Type Priority Cost FastForwarding ---------------------------------------- ------------ ...

  • SMC Networks 1000BASE-X - page 56

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-38 Note: Fast Forwarding enables end-node workstations and servers to overcome time-out problems when the Spanning Tree Algorithm is implemented in a network. Ther efore, Fast Forwarding should only be enabled for ports conne cted to an en d-node device. (Path) Cost 100/1 9/4 This parameter is used by ...

  • SMC Networks 1000BASE-X - page 57

    C ONFIGURING THE S WITCH 2-39 Viewing the Current Spanning Tree Information The Spanning T ree Infor mation screen displa ys a summary of the STA infor mation for the overall bridge or for a specific port. T o make any changes to the parameters for the Sp anning T ree, use the Spanning T ree Configuration menu. Displaying the Current Bridge STA The ...

  • SMC Networks 1000BASE-X - page 58

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-40 Parameter Description Priority Device priority is used in selecting th e root device, root port, and designated port. Th e device with t he highest priority becomes the STA root device. However, if all devices have the same priority, the device with the lowest MAC address will the n become the root ...

  • SMC Networks 1000BASE-X - page 59

    C ONFIGURING THE S WITCH 2-41 Displaying the Current STA for Ports The parameters shown in the following figure and table are for por t STA Infor mation. Spanning Tree Port Informatio n : Unit 1 Port 1 - 12 ============================= = Port Type Status Designated Desi gnated Designated Cost Bridge Port ---------------------------------- -------- ...

  • SMC Networks 1000BASE-X - page 60

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-42 Parameter Description Type Shows port type as: 100FX : 100BASE-FX 1000SX : 1000BASE-SX 1000LX : 1000BASE-LX 1000T : 1000BASE-T Status Displays current state of this port within the Spanning Tree: No Link No link has been es tablished on thi s port. Disabled Port has been disabled by th e user or has ...

  • SMC Networks 1000BASE-X - page 61

    C ONFIGURING THE S WITCH 2-43 Designated Bridge (ID) The priority and MAC address of the device through which this port must communic ate to reach the roo t of the Spanning Tree. Designated Port (ID) The priority an d number of the port on the de signated bridging device through which this switch must communicate with the root of the Spanning Tree. ...

  • SMC Networks 1000BASE-X - page 62

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-44 Using a Mirror Port for Analysis Y ou can mirror traffic from any source port to a target por t for real-time analysis . Y ou can then attach a logic analyzer or RMON probe to the target port and study the traffic crossing the sour ce port in a co mpletely unobtr usiv e manner . W hen mir roring por ...

  • SMC Networks 1000BASE-X - page 63

    C ONFIGURING THE S WITCH 2-45 Configuring Port Trunks P or t tr unks can be used to increase the bandwidth of a netw ork connection or to ensure fault recovery . Y ou can configure up fi ve tr unk connections (combining 2~4 por ts into a fat pipe) betw een any two standalone SMC6924MT switches, or up to 12 for an enti re stack. Howev er, before mak ...

  • SMC Networks 1000BASE-X - page 64

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-46 Y ou can use the P or t T r unking Configur ation screen set up port tr unks as shown belo w : Port Trunking Configuration =========================== Trunk ID Status Member List 1234 --------- -------- ----------- ---- ------- ----------- ----------- -- -------- Unit : - Unit : - Unit : - Unit : - ...

  • SMC Networks 1000BASE-X - page 65

    C ONFIGURING THE S WITCH 2-47 The MT -RJ ports used for one side of a tr unk must all be on the same internal switch c hip . T he por t g roups per mitted include: The 100BASE-FX fiber ports used for one side of a trunk must all be on the same module. Ho wev er, the 1000B AS E-X por ts used for one side of a tr unk may be on any switc h in the stac ...

  • SMC Networks 1000BASE-X - page 66

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-48 IGMP Multicast Filtering Multicasting is used to support real -time applications such as video conferencing or streamin g audio . A multicast ser ver does not hav e to establish a separate connect ion with each client. It merely broadcasts its ser vice to the networ k, and any hosts which w ant to r ...

  • SMC Networks 1000BASE-X - page 67

    C ONFIGURING THE S WITCH 2-49 Configuring IGMP This protocol allows a host to infor m its local switch/router that it wants to receiv e transmissions addressed to a specific multicast g roup . Y ou can use the IGMP Configuration screen to configure m ulticast filtering shown below . Note: The defaul t values are indicated in the sample scr een. IGM ...

  • SMC Networks 1000BASE-X - page 68

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-50 Configuring Broadcast Storm Control Use the Broadcast Stor m Control C onfiguration screen to enable broadcast stor m control for any port on the switc h, as shown belo w . Broadcast Storm Control Configuration : Unit 1 Port 1 - 12 ====================================== Broadcast control on all port ...

  • SMC Networks 1000BASE-X - page 69

    C ONFIGURING THE S WITCH 2-51 Configuring Bridge MIB Extensions The Bridg e MIB includes extensions for manag ed devices that support T raffic Classes and Vir tual LANs . T o display and configure these extensions, use the Extended Bridg e C onfiguration screen as shown below . Extended Bridge Configuration ============================= Bridge Capa ...

  • SMC Networks 1000BASE-X - page 70

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-52 Configurable PVID Tagging This sw itch allow s you to override the de fault PVID (Port VLAN ID) assigned to untagged incoming frames under “802.1Q VLAN Port Configuration” on page 2-62.) Local VLAN Capable This switc h does not support multiple local bridges (that is, multiple Spanning Trees). B ...

  • SMC Networks 1000BASE-X - page 71

    C ONFIGURING THE S WITCH 2-53 Configuring Traffic Classes IEEE 802.1p defines up to 8 separate traffic classes . This switch supports Quality of Ser vic e (QoS) by using tw o priority queu es , with W eighted F air Queuing for each port. Y ou can use the 802.1P Configuration menu to configure the default priority for each port, or to display the ma ...

  • SMC Networks 1000BASE-X - page 72

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-54 Port Priority Configuration Inbound frames that do not hav e any VLAN tags are tag ged with the input port’ s default VLAN ID (PVID) and th e Default Ingress User Priority as shown in the follo wing menu, and then so rted into the appropriate priority queue at the output port. (Note that if the ou ...

  • SMC Networks 1000BASE-X - page 73

    C ONFIGURING THE S WITCH 2-55 802.1p Port Traffic Class Information This switch provides tw o priority le vels with W eighted Fair Queuing for port eg ress . This means that any frames with a priority tag from 0~3 are sent to the low prio rity queue “0” wh ile those from 4~7 are sent to the high priority queue “1” as sho wn in the following ...

  • SMC Networks 1000BASE-X - page 74

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-56 Configuring Virtual LANs Y ou can use the VLAN configuration menu to assign any port on the switch to any of up to 256 LAN g roups . In conv entional netw orks with routers , broadcast traffic is split up in to se parate domains . Switches do not inherently support broadcast domains . This can lead ...

  • SMC Networks 1000BASE-X - page 75

    C ONFIGURING THE S WITCH 2-57 802.1Q VLAN Current Table Information This screen shows the cu r rent port members of each VLA N and whether or not the port suppor ts VLAN tag ging . P or ts assigned to a large VLAN g roup that crosses sev eral switches should use VLAN tagging. Ho wev er , if you just w ant to create a small port- based VLAN for one ...

  • SMC Networks 1000BASE-X - page 76

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-58 Creation Time The value of sysUpT ime (System Up Time) when this VLAN was created. Status Shows how thi s VLAN was added to the switch. Dynamic GVRP: Au tomatically learned via GVRP. Permanent: Added as a static entry. Unit Stack unit. Current Egress Ports Shows the port s which have been added to t ...

  • SMC Networks 1000BASE-X - page 77

    C ONFIGURING THE S WITCH 2-59 802.1Q VLAN Static Table Configuration Use this screen to create a new VLAN or modify the settings for an existing VLAN . Y ou can add/delete por t members for a VLAN from any unit in th e stack as a tag ged or untag ged member . Or you can prev ent a port from being automati cally added to a VLAN by the GVRP protocol. ...

  • SMC Networks 1000BASE-X - page 78

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-60 Parameter Description VID The ID for the VLAN currently displaye d. Range: 1-2048 VLAN Name A user-specified symb olic name for this VLAN. String length: Up to 8 alphanumeric characters Status Sets the current editing status for this VLAN as: Not in Service, Destroy or Active. Unit Stack unit. Egres ...

  • SMC Networks 1000BASE-X - page 79

    C ONFIGURING THE S WITCH 2-61 F or e xample, the following screen displays settings for VLAN 2, which includes tag g ed por ts 1-6, and forbidde n port 8. Notes : 1. T o allow this switch to participate in a VLAN group that extends beyond this switch, y o u mus t add the VLAN ID for the required ex ternal g rou ps . 2. If a remov e d port is no lon ...

  • SMC Networks 1000BASE-X - page 80

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-62 802.1Q VLAN Port Configuration Use this screen to configure port -specific settings for IEEE 802.1Q VLAN features . 802.1Q VLAN Port Configuration : Unit 1 Port 1 - 12 =============================== Port PVID Acceptable Ingress GVRP GVRP Failed GVRP Last Frame Type Filtering Status Registrations PD ...

  • SMC Networks 1000BASE-X - page 81

    C ONFIGURING THE S WITCH 2-63 GVRP Status* Enables or dis ables GVRP for this port. When disabled, any GVRP packets received on thi s port will be discarded and no GVRP registrations will be propagated from othe r ports. Note that GVRP must be enable d for the switch bef ore this setting can take effe ct . (See Device Co ntrol Menu / Extended Bridg ...

  • SMC Networks 1000BASE-X - page 82

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-64 Port Security Configuration Use the P or t Security Configuration screen to enable and conf igure port security for the switch. P ort Se curity allows y ou to configure each port with a list of MA C addresses of device s that are authorized to access the network through th at port. Port Security Con ...

  • SMC Networks 1000BASE-X - page 83

    C ONFIGURING THE S WITCH 2-65 Mode Port security can be set to th ree states; S tatic, Disable, or Learning. When set to Static, th e switch will drop packets from the port if the source MAC address does not matc h one of the addresses in the MA C Address list. If set to L earning, the switch will add the source MAC address of all packets received ...

  • SMC Networks 1000BASE-X - page 84

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-66 Monitoring the Switch The Network Monitor Men u provides access to p or t statistics , RMON statistics , IP multicast addresses , and the static address table . Each of the screens provided by these men us is described in the following sections . Network Monitor Menu ==================== Port Statis ...

  • SMC Networks 1000BASE-X - page 85

    M ONITORING THE S WITCH 2-67 Displaying Port Statistics P or t Statistics display key statistics from the Ethernet-like MIB for each port. Er ror statistics on the traffic pass ing through each por t are displayed. This infor mation can be used to id entify potential problems with the switch (suc h as a faulty port or un usually heavy loading). T h ...

  • SMC Networks 1000BASE-X - page 86

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-68 SQE Test Errors* A count of times that the SQE TEST ER ROR message is generated by the PLS su blayer. Deferred Transmissions* A count of frames for which the first transm ission attempt on a p articular interface is de layed because the medium was busy. Late Collisions The n umber of times that a co ...

  • SMC Networks 1000BASE-X - page 87

    M ONITORING THE S WITCH 2-69 Displaying RMON Statistics Use the RMON Statistics sc reen to display key statistics for eac h port from RMON g roup 1. (RMON groups 2, 3 and 9 can only be accessed using SNMP management software such as EliteView .) The following screen displays the ov erall statistics on tra ffic passing through each por t. RMON stati ...

  • SMC Networks 1000BASE-X - page 88

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-70 Multicast Fram es The total number of go od frames rece ived that were directed to this multicast address. CRC/Alignment Errors The number of CRC/alignment errors (FCS or alignment errors). Undersize Frames The total number of fra mes received that were less than 64 octets long (excludi ng framing b ...

  • SMC Networks 1000BASE-X - page 89

    M ONITORING THE S WITCH 2-71 Displaying the Unicast Address Table The Address T able contains the MA C addresses and VLAN id entifier associated with each por t (that is, the source port associat ed with the address and VLAN), sor ted by MAC address or VLAN ID . Y ou can search for a specific address, clear the en tire address table, or information ...

  • SMC Networks 1000BASE-X - page 90

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-72 Unit Switch unit in the stack (1~6). Port The po rt whose address table incl udes this MAC address. Status Indicates address status as: D: Dynamically learne d, or P: Fixed permanently by SNMP netwo rk management software. Sorted/Cleared by Sele cts the primary key used to sort/clear the table: MAC ...

  • SMC Networks 1000BASE-X - page 91

    M ONITORING THE S WITCH 2-73 Displaying the IP Multicast Registration Table Use the IP Multicast Registration T able to display all the m ulticast g roups activ e on this switch, including multicast IP addresses and the cor responding VLAN ID . IP Multicast Registration Table =============================== VID Multicast IP Unit Multicast Group Por ...

  • SMC Networks 1000BASE-X - page 92

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-74 Configuring Static Unicast Addresses Use the Static Unicast Address T able Configuration screen to manually configure host MA C addresses in the unic ast table. Y ou can use this screen to associate a MA C address with a specific VLAN ID and switch port as shown belo w . Static Unicast Address Table ...

  • SMC Networks 1000BASE-X - page 93

    M ONITORING THE S WITCH 2-75 Status The status for an entry can be set to: Permanent This entry is currentl y in use and will remain so after the next reset of the swit ch. DeleteOnRese t This entry is currently in us e and will remain so until the next reset. Invalid Removes the corres ponding entry. DeleteOnTimeOut This entry is currently in use ...

  • SMC Networks 1000BASE-X - page 94

    U SING THE S YSTEM C ONFIGURATION P RO GR AM 2-76 Resetting the System Use the Restart command under the Main Menu to reset the management agent. T he reset screen includes options as sho wn in the following figure and table. Logging Off the System Use the Exit comma nd under the Main Menu to exit the configuration prog ram and term inate communica ...

  • SMC Networks 1000BASE-X - page 95

    3-1 C HAPTER 3 W EB -B ASED M ANAGEMENT Web-Based Configuration and Monitoring As well as the men u-driv en system configuration prog ram, the ag ent module provides an embedded HT TP W eb ag ent. This agent can be accessed by any computer on the network using a standard W eb browser (Internet Explorer 4.0 or above, or Netscape Navigator 4.0 or abo ...

  • SMC Networks 1000BASE-X - page 96

    W EB -B ASED M ANAGEMENT 3-2 Navigating the Web Browser Interface T o access the W eb-browser interfa ce you m ust first ent er a user name and password. The default user name is “admin, ” with no password. The administrator has R ead/W rite access to all configurati on parameters and statistics . Home Page When your W eb browser connects with ...

  • SMC Networks 1000BASE-X - page 97

    N AVIGATING THE W EB B RO W S E R I NTERFACE 3-3 If this is y our first time to access th e management agent, you should define a new Administrator passw ord, record it and put it in a safe place. From the Main M enu, sele ct Security a nd enter a new passw ord for the Administrator . Note that passwor ds can consist of up to 11 alphanumeric charac ...

  • SMC Networks 1000BASE-X - page 98

    W EB -B ASED M ANAGEMENT 3-4 Panel Display The W eb agent di splays an image of the switch’ s ports, showing por t links and activity . Clicking on the image of a por t displays statistics and configuration infor mation for the port. Clicking on the imag e of the serial port (labeled “Mgmt”) displays the Co nsole Configuration screen. Clic ki ...

  • SMC Networks 1000BASE-X - page 99

    P ANEL D IS PLAY 3-5 Console Configuration If you are ha ving difficulties making an out-of-band console connection to the serial port on the agent module, y ou can display or modify the cu r rent settings for the serial port through the W eb ag ent. Click on the serial port icon in the switch image to display or configure these settings , as shown ...

  • SMC Networks 1000BASE-X - page 100

    W EB -B ASED M ANAGEMENT 3-6 Data bits 8 bits Sets the data bits of the RS-232 port. Options : 7, 8 Stop bits 1 bit Sets the stop bits of the RS-232 port. Options : 1, 2 Parity none Sets the parity of the RS-232 port. Options : no ne/odd/even Auto-Refresh Time 5 seconds Sets the interval bef ore a console session wi ll auto refresh the cons ole inf ...

  • SMC Networks 1000BASE-X - page 101

    M AIN M ENU 3-7 Main Menu Using the on-board W eb ag ent, you can define system pa rameters , manag e and control the switch, the connected stack and all its ports , or monitor network conditions . The following tabl e briefly describe s the selections av ailable from this program. Menu Description System Provides basi c system descrip t ion, inclu ...

  • SMC Networks 1000BASE-X - page 102

    W EB -B ASED M ANAGEMENT 3-8 System Information Use the System Infor mation screen to display descriptive infor mation about the switch, or for quic k syst em identi fication as sho wn in the following figure and table . Parameter Description System Name * Name assigned to the switch syst em. IP Address IP address of the agent you are managing. The ...

  • SMC Networks 1000BASE-X - page 103

    S WITCH I NFOR MATION 3-9 Switch Information Use the Switch Information screen to display hardware/firmware version numbers for the main board, as well as the pow er status and modules plug ged into the system. Main Board Parameter Description Serial Number Serial number of th e main board. Number of Ports Number of ports (including m odules). Hard ...

  • SMC Networks 1000BASE-X - page 104

    W EB -B ASED M ANAGEMENT 3-10 Agent Module Expansion Slot Parameter Description Hardware Version Hardware ve rsion of the agent module. POST ROM Version Agent module’s Power-On Self -Test version. Firmware Version Agent module’s firmware version. Role Shows that the agent modu le is operatin g as Master. Parameter Description Expansion Slot 1 S ...

  • SMC Networks 1000BASE-X - page 105

    IP C ONFIGURATION 3-11 IP Configuration Use the IP Configuration screen to se t the bootup option, configure the IP address for the on-board management ag ent, or set the number or concur rent T elnet sessions allow ed. The screen shown belo w is described in the following table . Parameter Default Description IP State USER-CONFIG Specifies whethe ...

  • SMC Networks 1000BASE-X - page 106

    W EB -B ASED M ANAGEMENT 3-12 Subnet Mask 255.255.0.0 Subnet mask of the switch you have selecte d. This mask identif ies the host addres s bits used for routing to specific subnets. Gateway IP Gateway used to pass trap me ssages from the switch to the management station. N ote that the gateway must be define d if the management station is lo cated ...

  • SMC Networks 1000BASE-X - page 107

    SNMP C ONFIGURATION 3-13 SNMP Configuration Use the SNMP Configuration screen to displa y and modify parameters for the Simple Networ k Management Pr otocol (SNMP). The stack should includes an SNMP ag ent module which monitors the status of its hardware, as w ell as the traffic passing through its ports. A computer attached to the netw ork, called ...

  • SMC Networks 1000BASE-X - page 108

    W EB -B ASED M ANAGEMENT 3-14 Trap Managers The following figure and table desc ribe how to specify management stations that will receive authentica tion failure messages or other trap messages from the switch. Up t o 5 trap manag ers may be entered. Parameter Description Trap Manager Capability Up to 5 trap managers may be used . Trap Manager IP A ...

  • SMC Networks 1000BASE-X - page 109

    S ECURITY C ONFIGURATION 3-15 Security Configuration Use the Security Configuration screen to restrict management access based on a specified passw ord. The Admi nistrator has write access for parameters governing the SNMP agen t. Y ou should therefore assign a password to the Administrator as soon as possible , and store it in a safe place. (If fo ...

  • SMC Networks 1000BASE-X - page 110

    W EB -B ASED M ANAGEMENT 3-16 Firmware Upgrade Options Y ou can upg rade system fir mware via a W e b browser , a TFTP ser ver, or a direct connection to the console port. Web Upload Management Us e t he W eb Up lo ad M ana g e me nt me nu t o loa d so ft war e u pd at es i nto t he switch. The upload file must be an SMC6924MT binary file from SMC; ...

  • SMC Networks 1000BASE-X - page 111

    F IRM WARE U PGRADE O PTIONS 3-17 TFTP Download Management Use the TF TP Download Manag ement m enu to load sof tware updates into the switch. The download file s hould be an SMC6924MT binar y file from SMC; otherwise the agent will not acce pt it. T he success of the download operation depends on the acce ssibility of the TFTP server and the quali ...

  • SMC Networks 1000BASE-X - page 112

    W EB -B ASED M ANAGEMENT 3-18 Configuration Save and Restore Use the Configur e screen to sa ve the sw itch configuration settings to a file on a TFTP ser ver . T he file can be later downloaded to the switch to restore the switch’ s settings. The su ccess of the operation depends on the accessibility of the TFTP ser ver and th e quality of the n ...

  • SMC Networks 1000BASE-X - page 113

    C ONFIGURATION S AVE AND R ESTOR E 3-19 Configuration Download Management Use the Configuration Download Management to restore switc h configuration settings from a file on a TFTP sev er. P arameters shown on this scre en are indic ated in the fo llowing figure and tab le. Parameter Description Server IP Address IP addr ess of the TFTP server. File ...

  • SMC Networks 1000BASE-X - page 114

    W EB -B ASED M ANAGEMENT 3-20 Address Table Configuration The Address Table contains the unicast MA C addresses and VLAN identifier associated wit h each port (that is , the source port), sorted by MA C address or VLAN . Y ou can also cle ar the entire address table , or infor mation ass ociated with a sp ecific address; or set the aging time for d ...

  • SMC Networks 1000BASE-X - page 115

    S PANNING T RE E A LGORITHM (STA) 3-21 Spanning Tree Algorithm (STA) The Spanning T ree Algorithm can be used to detect and disable netw ork loops , and to provide backup links betw een switches , bridg es or routers . This allows the switch to interact with other bridging devices (that is , ST A-compliant switch, bridg e or router ) in your netw o ...

  • SMC Networks 1000BASE-X - page 116

    W EB -B ASED M ANAGEMENT 3-22 Spanning Tree The param eters shown in the followi ng figure and table describe the cur rent bridge STA Infor mation. Parameter Description Spanning Tree State Shows if the swi tch is enabled to participate in an STA-compliant network. Bridge ID A unique identi fier for this bridge, c onsisting of bridge priority plus ...

  • SMC Networks 1000BASE-X - page 117

    S PANNING T RE E A LGORITHM (STA) 3-23 Ports The parameters shown in the following figure and table are for por t STA Infor mation. Parameter Description Port Status Displays the current state of this port within the spanning tree: No Link No link has been estab lished on this port. Disabled Port has been disabled by t he user or has failed diagnos ...

  • SMC Networks 1000BASE-X - page 118

    W EB -B ASED M ANAGEMENT 3-24 The rules defining po rt status are: • A port on a network segment wi th no other STA compliant bridging device is always forwarding. • If two ports of a switch are connected to the sam e segment and there is no other STA device attached to this segm ent, the port with the sma ller ID forwards packets and the other ...

  • SMC Networks 1000BASE-X - page 119

    S PANNING T RE E A LGORITHM (STA) 3-25 Spanning Tree Configuration The following figures and tables de scribe Bridge ST A configuration. Switch When the Switch Becomes Root Parameter Default Description Usage Enabled Enable this parameter to participate in an STA compliant netwo rk. Priority 32,768 Device priority is used in selectin g the root dev ...

  • SMC Networks 1000BASE-X - page 120

    W EB -B ASED M ANAGEMENT 3-26 Max (Message) A ge 20 The maximum time (in seconds) a device can wait without receivi ng a configuration mess age before attempting to reconf igure. All device ports (except for designated ports) should receive configuration messages at regular intervals. Any por t that ages out STA information (p rovided in the la st ...

  • SMC Networks 1000BASE-X - page 121

    S PANNING T RE E A LGORITHM (STA) 3-27 STA Port Configuration The following figure and table descri be STA conf iguration for ports or modules . Parameter Default Description Fast Forwarding Mode (All Ports) Enabled See “Fast Forward” in this table. Priority 128 Defines the priority fo r the use of a port in the STA a l g o r i t h m . I f t h ...

  • SMC Networks 1000BASE-X - page 122

    W EB -B ASED M ANAGEMENT 3-28 Path Cost 100/19/4 This pa rameter is used by the STA algorithm to determine the best path betwee n devices. Therefore, lower values should be assigned to ports attached to faster media, and higher valu es as signed to ports wi th slower media. The default and recommended range is: Standard Ethernet: 100 (50~600) Fast ...

  • SMC Networks 1000BASE-X - page 123

    C ONFIGURING B RIDGE MIB E XTENSIONS 3-29 Configuring Bridge MIB Extensions The Bridg e MIB includes extensions for manag ed devices that support T raffic Classes and Vir tual LANs . T o display and configure these extensions , use the Bridge Extension screen as shown below: Bridge Capability Parameter Description Extended Multicast Filtering Se rv ...

  • SMC Networks 1000BASE-X - page 124

    W EB -B ASED M ANAGEMENT 3-30 Bridge Settings Parameter Description Traffic Classe s* Multiple traf fic classe s are suppo rted by this switch as indicated under Bridge Capabilities. However, you c an disable this fun ction by setti ng this parameter to False. GMRP* GARP Multicast Regis tration Protocol (GMRP) allows network devices to regi ster en ...

  • SMC Networks 1000BASE-X - page 125

    P RIORITY 3-31 Priority IEEE 802.1p defines up to 8 separate traffic classes . This switch supports Quality of Ser vic e (QoS) by using tw o priority queu es , with W eighted F air Queuing for each port. Y ou can use th e Priority Menu to configure the default priority for each port, or to displa y the mapping f or the traffic classes . Port Priori ...

  • SMC Networks 1000BASE-X - page 126

    W EB -B ASED M ANAGEMENT 3-32 Port Traffic Class Information This switch provides two priority lev els with weighted fair queuing for por t eg ress . T his means that any fr ames with a default or user priority from 0~3 are sent to the low priority queue “0” while those from 4~7 are sent to the high priority queue “1” as sho wn in the follo ...

  • SMC Networks 1000BASE-X - page 127

    VLAN M ANAGEMENT 3-33 VLAN Management Use the VLAN Manag ement screen to define which VLAN has management access to the switch. P a rameters shown on this screen are indicated in the following figure and table: Parameter Default Description CPU Join VLAN All Select ALL to give all VLAN s access to swit ch management, or ONE to restrict access to a ...

  • SMC Networks 1000BASE-X - page 128

    W EB -B ASED M ANAGEMENT 3-34 Configuring Virtual LANs Y ou can use the VLAN configuration menu to assign any port on the switch to any of up to 256 LAN g roups . In conv entional netw orks with routers , broadcast traffic is split up in to se parate domains . Switches do not inherently support broadcast domains . This can lead to broadcast stor ms ...

  • SMC Networks 1000BASE-X - page 129

    C ONFIGURING V IRTUAL LAN S 3-35 VLAN Current Table This screen shows the cu r rent port members of each VLA N and whether or not the port suppor ts VLAN tag ging . P or ts assigned to a large VLAN g roup that crosses sev eral switches should use VLAN tagging. Ho wev er , if you just w ant to create a small port- based VLAN for one or two switc hes ...

  • SMC Networks 1000BASE-X - page 130

    W EB -B ASED M ANAGEMENT 3-36 VLAN Static List Use this scre en to create or remov e VLAN g roups . Egress Ports Shows the port s which have bee n added to th e displayed VLAN gr oup. Untagged Ports Shows the untagged VLAN port members . Parameter Description Current Lists al l the current VLAN groups created for t his system. Up to 256 VLAN groups ...

  • SMC Networks 1000BASE-X - page 131

    C ONFIGURING V IRTUAL LAN S 3-37 VLAN Static Table Use this screen to modify the settin gs for an existing VLAN . Y ou can add/ delete port members for a VLAN from any unit in the stack. (Note that VLAN 1 is fix ed as an untag ged VLAN containing all por ts in the stac k, and cannot be modified via this screen.) The switch supports an overlapping V ...

  • SMC Networks 1000BASE-X - page 132

    W EB -B ASED M ANAGEMENT 3-38 Use the menu sho wn below to prev ent a port from being dynamically added to the displa yed VLAN g roup through GVRP . Parameter Description Egress Ports Adds ports to the spec ified VLAN. Parameter Description Forbidden Egress Ports Prevents a port from being automatically added to th is VLAN via GVRP. Note that GV RP ...

  • SMC Networks 1000BASE-X - page 133

    C ONFIGURING V IRTUAL LAN S 3-39 Use the menu sho wn below to assign ports to the specified VLAN group as an IEEE 802.1Q tag g ed or untag g ed port. Assign por ts as tag g ed if they are connected to 802.1Q VLAN compliant devices, or untagg ed if they are connected to VLAN -unaware devices . Note: If a removed port is no longer assi gned to any ot ...

  • SMC Networks 1000BASE-X - page 134

    W EB -B ASED M ANAGEMENT 3-40 VLAN Static Membership by Port Use the screen shown belo w to assign VLAN groups to the selected port. T o perfor m detailed por t configurat ion for a specific VLAN , use the VLAN Static T able (pag e 3-37). Parameter Description Port Number Port number on the switch s elected from the up per display panel. Add/Remove ...

  • SMC Networks 1000BASE-X - page 135

    C ONFIGURING V IRTUAL LAN S 3-41 VLAN Port Configuration Use this screen to configure port -specific settings for IEEE 802.1Q VLAN features . Parameter Description PVID The VLAN ID assigned to untagged f rames received on this port. Use the PVID to assign p orts to the same untagged VLAN. Acceptable Frame Type This swit ch accepts “All” frame t ...

  • SMC Networks 1000BASE-X - page 136

    W EB -B ASED M ANAGEMENT 3-42 IGMP Multicast Filtering Multicasting is used to support real -time applications such as video conferencing or streamin g audio . A multicast ser ver does not hav e to establish a separate connect ion with each client. It merely broadcasts its ser vice to the networ k, and any hosts which w ant to receiv e the multicas ...

  • SMC Networks 1000BASE-X - page 137

    IGMP M ULTICAST F ILTERING 3-43 Configuring IGMP This protocol allows a host to infor m its local switch/router that it wants to receiv e transmissions addressed to a specific multicast address g roup . Use the IGMP Configuration screen to set k ey paramete rs for multicast filtering as shown below . Note: The defaul t values are indicated in the s ...

  • SMC Networks 1000BASE-X - page 138

    W EB -B ASED M ANAGEMENT 3-44 IP Multicast Registration Table Use the IP Multicast Registration T able to display all the m ulticast g roups activ e on this switch, including m ulticast IP addresses and the cor responding VLAN ID . Parameter Description VLAN ID VLAN ID assigned to this multicast group. Multicast IP Address IP address fo r specific ...

  • SMC Networks 1000BASE-X - page 139

    P ORT M ENUS 3-45 Port Menus Port Information The Port Infor mation screen displa ys the port status , link state, the communi cation speed a nd duplex m ode, as well as the flow contro l in use . T o change any of the por t settings , use the P ort Configuration menu. T he parameters are shown in the following figure and table . Parameter Descript ...

  • SMC Networks 1000BASE-X - page 140

    W EB -B ASED M ANAGEMENT 3-46 Port Configuration Use the P ort Configuration menu to configure any port on the switch. Parameter Default Description Flow Control Mode (on all ports) Disabled See “Flow Control Status” in this table. Admin Status Enable Allows you to disable a port due to abnormal behavior, and then re-enable it after the problem ...

  • SMC Networks 1000BASE-X - page 141

    P ORT M ENUS 3-47 Note: MT-RJ ports operate at 100 Mbps and support full- and half-duplex mode. 100BASE-FX module por ts operate at 100 Mbps, full-duplex only. 1000BASE-SX an d 1000BASE-LX ports are fixed at 1000 Mbps, but auto-negotiate duplex mode and flow control. 1000BASE-T ports auto-negotiate speed (1000/100/10 Mbps), duplex mode and flow con ...

  • SMC Networks 1000BASE-X - page 142

    W EB -B ASED M ANAGEMENT 3-48 Port Broadcast Storm Protect Configur ation Use the P or t Broadcast Stor m Protect Configuration screen to configure broadcast stor m control for any por t on the switch. Parameter Default Des cription Broadcast Storm Protect Mode Enabled Allows you to enable /disable broadcast storm control for all ports on the switc ...

  • SMC Networks 1000BASE-X - page 143

    P ORT M ENUS 3-49 Port Security Configuration Use the P or t Security Configuration screen to enable and conf igure port security for the switch. P ort Se curity allows y ou to configure each port with a list of MA C addresses of device s that are authorized to access the network through th at port. Parameter Description Port Numb er The port numbe ...

  • SMC Networks 1000BASE-X - page 144

    W EB -B ASED M ANAGEMENT 3-50 Using a Port Mirror for Analysis Y ou can mirror traffic from any source port to a target por t for real-time analysis . Y ou can then attach a logic analyzer or RMON probe to the target port and study the traffic crossing the sour ce port in a co mpletely unobtr usiv e manner . W hen mir roring por t traffic, note tha ...

  • SMC Networks 1000BASE-X - page 145

    P ORT T RUN K C ONFIGURATION 3-51 Port Trunk Configuration P or t tr unks can be used to increase the bandwidth of a netw ork connection or to ensure fault recovery . Y ou can configure up fi ve tr unk connections (combining 2~4 por ts into a fat pipe) betw een any two standalone SMC6924MT switches, or up to 12 for an enti re stack. Howev er, befor ...

  • SMC Networks 1000BASE-X - page 146

    W EB -B ASED M ANAGEMENT 3-52 Use the P or t T r unking Configuration screen to set up port tr unks as shown belo w : Parameter Description Trunk A unique ide ntifier for this trunk. Y ou can conf igure up to five trunks per switch. Status Enab les or disabl es the disp layed trunk. Member List You can c reate up to 12 tru nks for the entire st ack ...

  • SMC Networks 1000BASE-X - page 147

    P ORT T RUN K C ONFIGURATION 3-53 The MT -RJ ports used for one side of a tr unk must all be on the same internal switch c hip . T he por t g roups per mitted include: The 100BASE-FX SC-type fiber ports used for one side of a tr unk must all be on the same module . Howev er, the 1000B ASE-X por ts used for one side of a tr unk may be on any switc h ...

  • SMC Networks 1000BASE-X - page 148

    W EB -B ASED M ANAGEMENT 3-54 Port Statistics Use the P ort Statistics men u to displa y Etherlike o r RMON statis tics for any port on the switch. T he statistics displayed are indicated in the following figure and table . Etherlike Statistics Etherlike Statistics display key statis tics from the Ethernet-lik e MIB for each port. Error statistics ...

  • SMC Networks 1000BASE-X - page 149

    P ORT S TATISTICS 3-55 Note: Statistics ar e automatically ref reshed every 60 seconds. Excessive C ollisions* The number of fram es for which transmission faile d due to excessive collisions. Internal Mac Transmit Errors* The number of frames for which transmission failed due to an internal MAC subl ayer transmit error. Carrier Sense Errors* The n ...

  • SMC Networks 1000BASE-X - page 150

    W EB -B ASED M ANAGEMENT 3-56 RMON Statistics RMON Statistics display ke y s t a t i s t i c s f or e a c h p o r t o r m e d i a m o d u l e f r o m RMON g roup 1. (RMON groups 2, 3 and 9 can only be accessed using SNMP management software such as EliteView .) The following screen displays o verall statistics on traffi c passing through eac h por ...

  • SMC Networks 1000BASE-X - page 151

    P ORT S TATISTICS 3-57 Note: Statistics ar e automatically ref reshed every 60 seconds. Oversize Frames The total numb er of frames rece ived that were lon ger than 1518 octets (excluding fram ing bits, but in cluding FCS octets) and were othe rwise well formed. Fragments The total number of frames received that were less than 64 octets in length ( ...

  • SMC Networks 1000BASE-X - page 152

    W EB -B ASED M ANAGEMENT 3-58 ...

  • SMC Networks 1000BASE-X - page 153

    4-1 C HAPTER 4 A DVANCED T OPICS This TigerStack 100 supports Layer 2 switching and other advanced features, whic h are described in this chapter . Layer 2 Switching When a frame enters a port, its destination MA C address is check ed in the address database to see whic h port le ads to this destination. If the destinati on address be longs to the ...

  • SMC Networks 1000BASE-X - page 154

    A DV ANC ED T OPICS 4-2 Spanning Tree Algori thm The Spanning T ree Algorithm (that is, the ST A configuration alg orithm as outlined in IEEE 802.1D) can be used to detect and disable netw ork loops , and to provide link backup . This allows the switch to interact with other bridging devices (including ST A-compliant switches , bridg es or routers) ...

  • SMC Networks 1000BASE-X - page 155

    V IRTUAL LAN S 4-3 The following figure giv es an illu stration of how the Spanning T r ee Alg orithm assigns brid ging device ports . Virtual LANs Switches do not inherently support br oadcast domains , which can lead to broadcast stor ms in large networks th at handle a lot of IPX or NetBeui traffic . In conv entional networks with routers , broa ...

  • SMC Networks 1000BASE-X - page 156

    A DV ANC ED T OPICS 4-4 addresses or IP subnets . VLANs inherently provide a high leve l of network security , since traffic must pass throug h a La yer 3 switc h or a router to reach a different VLAN . This switch supports the following VLAN features: • Up to 256 VLANs based on the IEEE 802.1Q standard • Distributed VLAN learning across mu lti ...

  • SMC Networks 1000BASE-X - page 157

    V IRTUAL LAN S 4-5 frame to the port’ s default VLAN if the frame is untagg ed (determined by the PVID of the receiving port), or ma ps it for output to the broadcast domain associat ed with the frame’ s VLAN tag. Port Overlapping P or t overlapping can be used to allo w access to common ly shared netw ork resources among different VLAN groups ...

  • SMC Networks 1000BASE-X - page 158

    A DV ANC ED T OPICS 4-6 Connecting VLAN Groups The switch supports intra-VLAN communication using wire-speed switching . Howev er, if you hav e dev ices in separate VLANs that must communicate, and it is not practical to include these devices in a common VLAN , then the VLANs ca n be co nnected via a Layer 3 switch (suc h as the SMC6724L3) or a rou ...

  • SMC Networks 1000BASE-X - page 159

    C LASS - OF -S ER VICE (C O S) S UPPOR T 4-7 infor mation, and configures multicas t filters accordingly . IGMP Snooping generates no additional network traffic , allowing you to significantly reduce the multicast traffic passing thr ough your switch. IGMP Protocol The Inter net Group Manag ement Prot ocol (IGMP) r uns between hosts and their immed ...

  • SMC Networks 1000BASE-X - page 160

    A DV ANC ED T OPICS 4-8 Priority assignment to a packet in the TigerStack 100 can be accomplished in any of th e following w ays: • Priority can be explic itly assign ed by end stations which have applicatio ns that requir e a higher priority than best-effort. This switch utilizes the IEEE 802.1p and 802.1Q ta g structure to decide priority assig ...

  • SMC Networks 1000BASE-X - page 161

    SNMP M ANAGEMENT S OFTWAR E 4-9 SNMP Management Software SNMP (Simple Network Management Protocol) is a comm unication protocol designed specific ally for managing devices or other elements on a network. Netw ork equipment commonl y managed with SNMP inc ludes hubs , switches , bridg es , routers and host computers . SNMP is typically used to confi ...

  • SMC Networks 1000BASE-X - page 162

    A DV ANC ED T OPICS 4-10 This switch provides support for mini-RMO N which contains the four key g roups required for basic remote monitoring . T hese gr oups include: Statistics: Includes all the tools needed to monitor your netw ork for common er rors and o ver all traffic ra tes . Infor mation is provided on bandwidth utilization, peak utilizati ...

  • SMC Networks 1000BASE-X - page 163

    A-1 A PPENDI X A T ROUBLESHOOTING Troubleshooting Chart Troubleshooting Chart Symptom Action Cannot connec t using Telnet, Web browser, or SNMP software • Be sure to have configu red the agent with a valid IP address, subnet mask and default gateway. • Check that you have a valid network connection to the switch and that the port you are using ...

  • SMC Networks 1000BASE-X - page 164

    T R OUBLESHOOTING A-2 Upgrading Firmware via the Serial Port Y ou can upg rade system fir mware by connecting y our computer to the serial port on the switch, and using a console interface package that supports the XModem protocol. (See “Required Connections” on page 1-2.) 1. R estart the system by using the Re start System command or resetting ...

  • SMC Networks 1000BASE-X - page 165

    U PGRADING F IR MWARE VIA THE S ERIAL P ORT A-3 3. Change your baud rate to 115200 bps, and press Enter to enable download mode. F rom the ter minal em ulation prog ram, select the file you w ant to download, set the protocol to XModem, and then initialize downloading . Notes: 1. If you use Windows HyperT erminal, disconnect and reconnect to enable ...

  • SMC Networks 1000BASE-X - page 166

    T R OUBLESHOOTING A-4 ...

  • SMC Networks 1000BASE-X - page 167

    B-1 A PPENDIX B P IN A SSIGNMENTS Console Port Pin Assignments The DB-9 serial por t on the switch’ s re ar panel is used to connect to the switch for out-of-band console conf iguration. The on-board menu-dri ven configuration prog ram can be accesse d from a ter minal, a PC r unning a ter minal emulation program, or from a remote locati on via a ...

  • SMC Networks 1000BASE-X - page 168

    P IN A SSIGNMENTS B-2 Console Port to 9-Pin COM Port on PC Console Port to 25-Pin DTE Port on PC Switch’s 9-Pin Serial Port CCITT Signal PC’s 9-Pin COM Port 2 RXD <---------RXD ------------ 3 TxD 3 TXD -----------TXD ----------> 2 RxD 5 SGND -----------SG ND ---------- 5 SGND No other pins are used. Switch’s 9-Pin Serial Port Null Modem ...

  • SMC Networks 1000BASE-X - page 169

    Glossary-1 G LOSSARY Bandwidth Utilization The percentag e of packets receiv ed ov er tim e as compared to overall bandwidth. BOOTP Boot protocol used to load the opera ting system for devices connected to the net work. GARP VLAN Registration Prot ocol (GVRP) Defines a way for switches to ex change VLAN infor mation in order to register necessar y ...

  • SMC Networks 1000BASE-X - page 170

    G LOSSAR Y Glossary-2 IEEE 802.1D Specifies a general method for the operation of MA C bridg es, including the Spanning T ree Protocol. IEEE 802.1Q VLAN T ag ging defines Ethernet frame tags whic h carr y VLAN infor mation. It allows switches to a ssign end-stations to different virtual LANs , and defines a standard wa y for VLANs to communicate ac ...

  • SMC Networks 1000BASE-X - page 171

    G LOSSAR Y Glossary-3 Port Trunk Defines netw ork link ag g reg ation and tr unking standards whic h specify how to create a single high-speed logical link that combines several lower - speed physical links . Remote Monitoring (RMON) RMON provides comprehensi ve n etw ork monitoring capabilities . It eliminates the polling required in standard SNMP ...

  • SMC Networks 1000BASE-X - page 172

    G LOSSAR Y Glossary-4 Virtual LAN (VLAN) A Virtual LAN is a collection of network nodes that share the same collision domain regardless of their physical location or connection point in the network. A VLAN se r ves as a logical workgroup with no ph ysical bar riers , allowing users to share in for mation and resources as though located on the same ...

  • SMC Networks 1000BASE-X - page 173

    Index-1 Numerics 802.1p port priority 3-31 , 4-7 802.1Q VLANs 2-56 , 3-34 , 4-3 802.3x flow control 2-31 , 3-47 A analyzer port configuration 2-44 , 3-50 B baud rate configuration 2-17 , 3-5 BOOTP enabling 2-14 , 3-11 for IP configuration 1-5 BPDU 4-2 Bridge Protocol Dat a Units See BPDU bridge STA information 2-39 , 3-21 Broadcast Storm Control 2- ...

  • SMC Networks 1000BASE-X - page 174

    I NDEX Index-2 Internet Grou p Management Protoc ol See IGMP IP configu ration 2-13 , 3-11 L Layer 2 switching 4-1 link aggregation 2-45 , 3-51 , 4-8 login configuration 2-22 , 3-15 console interface 2-1 M MAC address of system 2-12 MAC address table, displaying 2-71 , 3-20 management options 1-1 software, SN MP 4-9 mirror port co nfiguration 2-44 ...

  • SMC Networks 1000BASE-X - page 175

    I NDEX Index-3 switch c onfiguratio n 2-28 switching , Layer 2 4-1 system information 2-7 , 3-8 T tagged ports 4-4 VLANs 4-5 TFTP downloads 2-24 , 3-17 time-out, cons ole 2-18 , 3-5 traffic classes configuration 2-53 , 3-31 , 4-7 trap managers, configuring 2-21 , 3-14 troublesh ooting A-1 trunk port configuration 2-45 , 3-51 U unicast address table ...

  • SMC Networks 1000BASE-X - page 176

    I NDEX Index-4 ...

  • SMC Networks 1000BASE-X - page 177

    ...

  • SMC Networks 1000BASE-X - page 178

    38 T esl a Irvine, CA 92618 Phone: (949) 679-8 000 Model Number: SMC6924MT Publication Number: 150200025700A Revisio n Number: E112002-R0 1 FOR TECHNICAL SUPPOR T , CALL: From U.S.A. and Canada (2 4 hours a day , 7 days a week) (800) SMC-4-Y OU; (949) 679-8000; F ax: (949) 679-1481 From Europe (8:00 AM - 5:30 PM UK T ime) 44 (0) 118 974 8700; Fax: ...

Manufacturer SMC Networks Category Switch

Documents that we receive from a manufacturer of a SMC Networks 1000BASE-X can be divided into several groups. They are, among others:
- SMC Networks technical drawings
- 1000BASE-X manuals
- SMC Networks product data sheets
- information booklets
- or energy labels SMC Networks 1000BASE-X
All of them are important, but the most important information from the point of view of use of the device are in the user manual SMC Networks 1000BASE-X.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals SMC Networks 1000BASE-X, service manual, brief instructions and user manuals SMC Networks 1000BASE-X. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product SMC Networks 1000BASE-X.

A complete manual for the device SMC Networks 1000BASE-X, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use SMC Networks 1000BASE-X by users. Manuals are usually written by a technical writer, but in a language understandable to all users of SMC Networks 1000BASE-X.

A complete SMC Networks manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual SMC Networks 1000BASE-X - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the SMC Networks 1000BASE-X, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the SMC Networks 1000BASE-X, that we can find in the current document
3. Tips how to use the basic functions of the device SMC Networks 1000BASE-X - which should help us in our first steps of using SMC Networks 1000BASE-X
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with SMC Networks 1000BASE-X
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of SMC Networks 1000BASE-X in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning SMC Networks 1000BASE-X?

Use the form below

If you did not solve your problem by using a manual SMC Networks 1000BASE-X, ask a question using the form below. If a user had a similar problem with SMC Networks 1000BASE-X it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)