Manual Hitachi H 65

12 pages 0.23 mb
Download

Go to site of 12

Summary
  • Hitachi H 65 - page 1

    DEMOLITION HAMMER MODEL H 65 INSTRUCTION MANUAL Note: Before using this HITACHI Demolition Hammer, carefully read through this INSTRUCTION MANUAL to ensure efficient, safe operation. It is recommended that this INSTRUCTION MANUAL be kept readily available as an important reference when using this power tool. ...

  • Hitachi H 65 - page 2

    1 We sincerely thank you for selecting a HITACHI POWER TOOL. To operate this power tool safely and efficiently, please read this INSTRUCTION MANUAL carefully to get a good understanding of the precautions in operation, capacity of the power tool, use and the like. IMPORTANT INFORMATION: SAFETY RULES FOR THE POWER TOOL WARNING: When using the power ...

  • Hitachi H 65 - page 3

    2 Inspect extension cords periodically and replace them if damaged. Keep handles dry, clean, and free from oil and grease. 13. DISCONNECT POWER TOOLS. When not in use, before servicing, and when changing accessories, such as blades, bits, cutters. 14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches ...

  • Hitachi H 65 - page 4

    3 27. STOP OPERATION IMMEDIATELY IF ANY ABNORMALITY IS DETECTED. Should the power tool be detected as out of order or should other abnormalities be observed during operation, stop using the power tool immediately. 28. NEVER LEAVE THE POWER TOOL RUNNING UNATTENDED. TURN POWER OFF. Don’t leave the power tool until it comes to a complete stop. 29. C ...

  • Hitachi H 65 - page 5

    4 GROUNDING INSTRUCTIONS This power tool should be grounded while in use to protect the operator from electric shock. The power tool is equipped with a three-conductor cord and three-prong grounding type plug to fit the proper grounding type receptacle. The green (or green and yellow) conductor in the cord is the grounding wire. Never connect the g ...

  • Hitachi H 65 - page 6

    5 EXTENSION CORD Use only three-wire extension cords that have three-prong grounding-type plugs and three- pole receptacles that accept the power tool’s plug. Replace or repair damaged extension cord. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current the power to ...

  • Hitachi H 65 - page 7

    6 NAME OF PARTS SPECIFICATIONS Motor Single-Phase, Series Commutator Motor Power Source Single-Phase, 115V AC, 60 Hz Current 11.4A Full-Load Impact Rate: 1,400/min Weight 39.7 lbs (18 kg) ACCESSORIES CAUTION: Only following genuine accessories for this power tool should be used. The use of any other attachment or accessory is not recommended becaus ...

  • Hitachi H 65 - page 8

    7 3. Scoop Overall length: 21-1/2” (546 mm) Code No.: 985233 4. Cutter Overall length: 20-1/2” (520 mm) Width: 3” (75 mm) Code No.: 985232 5. Electric Hammer Oil Capacity: 1 liter Code No.: 955009 APPLICATION This demolition hammer should be applied to breaking concrete, chipping off concrete, grooving, bar cutting, and driving piles in insta ...

  • Hitachi H 65 - page 9

    8 NOTE: Use a manual hammer to open/close the retainer as it is too heavy to move by hand. NOTE: When removing the accessory, such as a bull point, a cutter etc., follow the above procedure in reverse order. OPERATION 1. Pull the trigger switch after applying the tip of the bit to the crushing position. In some cases, it is necessary to punch the t ...

  • Hitachi H 65 - page 10

    9 3. Check the oil level once a day, confirming that oil is enough. 4. After feeding oil, securely clamp the oil gauge. NOTE: As an optional accessory, oil for the HITACHI Demolition Hammer (one liter) is sold separately. Use this oil when oil in the tank becomes less than the level indicated in Fig. 6 below. MAINTENANCE AND INSPECTION CAUTION: Be ...

  • Hitachi H 65 - page 11

    10 ...

  • Hitachi H 65 - page 12

    Issued by Shinagawa Intercity Tower A, 15-1, Konan 2-chome, Minato-ku, Tokyo 108-6020, Japan Distributed by 3950 Steve Reynolds Blvd. Norcross, GA 30093 Hitachi Koki Canada Co. 6395 Kestrel Road Mississauga ON L5T 1Z5 209 Code No. C99005463 N Printed in Japan 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 ...

Manufacturer Hitachi Category Power Hammer

Documents that we receive from a manufacturer of a Hitachi H 65 can be divided into several groups. They are, among others:
- Hitachi technical drawings
- H 65 manuals
- Hitachi product data sheets
- information booklets
- or energy labels Hitachi H 65
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hitachi H 65.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hitachi H 65, service manual, brief instructions and user manuals Hitachi H 65. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hitachi H 65.

Similar manuals

A complete manual for the device Hitachi H 65, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hitachi H 65 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hitachi H 65.

A complete Hitachi manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hitachi H 65 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hitachi H 65, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hitachi H 65, that we can find in the current document
3. Tips how to use the basic functions of the device Hitachi H 65 - which should help us in our first steps of using Hitachi H 65
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hitachi H 65
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hitachi H 65 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hitachi H 65?

Use the form below

If you did not solve your problem by using a manual Hitachi H 65, ask a question using the form below. If a user had a similar problem with Hitachi H 65 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)