English dropdown-ico

Manual Roland JV-1010

96 pages 2.43 mb
Download

Go to site of 96

Summary
  • Roland JV-1010 - page 1

    Thank you, and congratulations on your choice of the Roland JV-1010 64 Voice Synthesizer Module. In order to get a good understanding of the JV-1010’s many outstanding features and ensure many years of trouble-free use, please be sure to read through this manual in its entirety. * Apple is a registered trademark of Apple Computer, Inc. *M acintos ...

  • Roland JV-1010 - page 2

    IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE. BLUE: BROWN: As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is ...

  • Roland JV-1010 - page 3

    3 008c • Be sure to use only the AC adaptor supplied with the unit. Also, make sure the line voltage at the installation matches the input voltage specified on the AC adaptor’s body. Other AC adaptors may use a different polarity, or be designed for a different voltage, so their use could result in damage, malfunction, or electric shock. ...... ...

  • Roland JV-1010 - page 4

    4 USING THE UNIT SAFELY 101b • The unit and the AC adaptor should be located so their location or position does not interfere with their proper ventilation. .......................................................................................................... 102d • Always grasp only the plug or the body of the AC adaptor when plugging into ...

  • Roland JV-1010 - page 5

    5 Important Notes In addition to the items listed under “USING THE UNIT SAFELY” on page 2, please read and observe the following: ■ Power Supply • Do not use this unit on the same power circuit with any device that will generate line noise (such as an electric motor or variable lighting system). • The AC adaptor will begin to generate hea ...

  • Roland JV-1010 - page 6

    6 Important Notes ■ Additional Precautions • Please be aware that the contents of memory can be irretrievably lost as a result of a malfunction, or the improper operation of the unit. To protect yourself against the risk of loosing important data, we recommend that you periodically save a backup copy of important data you have stored in the uni ...

  • Roland JV-1010 - page 7

    7 How to Read This Owner’s Manual This owner’s manual is organized as follows. Quick Start This section is intended for those using the JV-1010 for the first time, and explains how to use various functions in a simple way. Please read Quick Start and follow along by actually operating the JV- 1010. This will help you understand most of what you ...

  • Roland JV-1010 - page 8

    8 Contents Main Features ........................................................................................ 10 Front and Rear Panel ............................................................................ 11 Quick Start ........................................................ 13 Getting Ready to Play ...................................... ...

  • Roland JV-1010 - page 9

    9 Contents Appendices ........................................................ 51 Troubleshooting .................................................................................... 52 Error Messages ..................................................................................... 53 Patch List ................................................. ...

  • Roland JV-1010 - page 10

    10 Main Features ■ Incorporates the JV-1080 Sound Module The JV-1010 is a 16-part multitimbral internal sound generator that can generate up to 64 voices simultaneously, and is equipped with a multi-effects processor (EFX) offering a total of 40 different effects. The Preset patches are compatible not only with the JV-1080 and the XP-30/50/60/80, ...

  • Roland JV-1010 - page 11

    11 Front and Rear Panel Front Panel fig.0-01 1. PHONES Jack This is the jack for connecting headphones (sold separately). * Use headphones with an impedance of 8 to 150 Ohms. 2. VOLUME Knob This adjusts the volume level for the OUTPUT jack and the PHONES jack. You can also check out a sound using the JV-1010 alone by pressing the VOLUME knob (Phras ...

  • Roland JV-1010 - page 12

    12 Front and Rear Panel Rear Panel fig.0-02 1. AC Adaptor Jack Accepts connection of the supplied AC adapter. 2. Cord Hook To prevent the inadvertent disruption of power to your unit (should the plug be pulled out accidentally), and to avoid applying undue stress to the AC adaptor jack, anchor the power cord using the cord hook, as shown in the ill ...

  • Roland JV-1010 - page 13

    13 Quick Start Quick Start ...

  • Roland JV-1010 - page 14

    14 Getting Ready to Play Attaching the Rubber Feet If you will not be using the separately available RAD-50 rack-mount adaptor, attach the rubber feet that were supplied with the JV-1010, as shown in the figure. Use the small holes on the bottom as a guide for positioning the rubber feet when attaching them. fig.1-01.e Installing on the Rack-Mount ...

  • Roland JV-1010 - page 15

    15 Getting Ready to Play Quick Start Installing a Wave Expansion Board One Wave Expansion Board (SR-JV80 series; sold separately) can be installed in the JV-1010. Waveform data, patches and rhythm sets are stored on the Wave Expansion Board, so you can increase the number of available sounds by installing the board in the JV-1010. The Wave Expansio ...

  • Roland JV-1010 - page 16

    16 Getting Ready to Play Follow the steps below to install the Wave Expansion Board. 1 Before installing the Wave Expansion Board, switch off the power to the JV-1010 and any connected equipment. 2 Detach the cover on the upper portion of the JV-1010. Loosen the four screws on the upper portion of the cover. fig.1-03a.e 3 Position the board holders ...

  • Roland JV-1010 - page 17

    17 Getting Ready to Play Quick Start 5 Use the tool supplied with the Wave Expansion Board to rotate the board holders to LOCK, securing the Wave Expansion Board in place. fig.1-03d.e 6 Use the (specified) screws you removed in step 2 to reattach the cover. This completes the installation of the Wave Expansion Board. Next, make sure the board is in ...

  • Roland JV-1010 - page 18

    18 Getting Ready to Play Making the Connections The JV-1010 does not have a built-in amp or speakers. In order to produce sound, you need to hook up audio equipment such as a monitor speaker or a stereo set, or use headphones. fig.1-06.e Monitor speakers (powered) Stereo set etc. Power amp Mixer etc. Cassette radio MIDI keyboard MIDI sequencer etc. ...

  • Roland JV-1010 - page 19

    19 Getting Ready to Play Quick Start Follow the steps described below to connect the JV-1010 and an external device. 1 Before making the connections, make sure the power to all equipment is switched off. 2 Connect the included AC adaptor to the AC adaptor jack and plug the adaptor into a power outlet. 3 Connect the JV-1010 and the external device a ...

  • Roland JV-1010 - page 20

    20 Getting Ready to Play Switching the Power On and Off ■ Switching On the Power 1 Before you switch on the power, check the following. • Are peripheral devices connected correctly? • Is the volume level on the JV-1010 and the connected external equipment turned down all the way? 2 Press the POWER switch on the JV-1010 to switch on the power. ...

  • Roland JV-1010 - page 21

    21 Quick Start Reset to Default Factory Settings ( Factory Reset) When using the JV-1010 for the first time, start by returning the settings to their factory defaults so that the JV-1010 operates as described in the procedures in the owner’s manual. This returns all settings stored in memory in the JV-1010 to the values they had when the unit was ...

  • Roland JV-1010 - page 22

    22 Listening to Demo Songs ( Demo Play) The JV-1010 comes with four demonstration songs. Here’s how to start Demo Play, and listen to the outstanding sounds of the JV-1010. Song Name Composer/Copyright All In Good Time Scott Wilkie © 1999 Scott Wilkie Media (ASCAP) Guitars Forever Gundy Keller © 1999 Gundy Keller / A-TOWN recordings Rude99 Hans ...

  • Roland JV-1010 - page 23

    23 Listening to Demo Songs (Demo Play) Quick Start ■ Composer Profiles Scott Wilkie Scott Wilkie is a contemporary jazz recording artist, based in southern California. He tours frequently with his own band, and also appears as an artist for Roland in the U.S., Japan, Europe and South America. His debut solo album, Boundless, was released worldwid ...

  • Roland JV-1010 - page 24

    24 Choosing and Playing Patches The JV-1010 comes with a large number of onboard sounds. On the JV-1010, the sounds used for an ordinary performance are called Patches . With the JV-1010, you can use seven groups—User, Preset A through E, and Session—and when a Wave Expansion Board (separately available) is installed, you can also use the Wave ...

  • Roland JV-1010 - page 25

    25 Choosing and Playing Patches Quick Start Auditioning Patches (Phrase Preview) On the JV-1010, you can check out patches easily, since phrases are provided for each type of patch. Thanks to this, you don’t need to have a MIDI keyboard or sequencer connected. In this section, we’ll listen to patch sounds in the Patch mode. fig.1-11 1 Press the ...

  • Roland JV-1010 - page 26

    26 Choosing and Playing Patches Playing Notes from a MIDI Keyboard The JV-1010 receives and plays MIDI data from other instruments. When doing this, the transmitting instrument (the MIDI keyboard or the like) and the JV-1010 must be set to the same MIDI channel. Here we’ll play sounds with both channels set to 1 . fig.1-13 1 Connect a MIDI keyboa ...

  • Roland JV-1010 - page 27

    27 Choosing and Playing Patches Quick Start Choosing Patches When you’ve selected the Patch mode or the Performance mode, after changing the Category and Bank with the CATEGORY/BANK knob, you can choose a patch by turning the VALUE knob. You can use either of two methods to choose a patch: choosing by bank (display with white text) or choosing by ...

  • Roland JV-1010 - page 28

    28 Choosing and Playing Patches ■ Choosing Patches by Category Here, let’s choose No. 008 Bright Piano from PIANO (the Piano category). fig.1-17 1 Press the VALUE knob to choose the Patch mode ( PATCH ). Pressing the VALUE knob makes the mode change sequentially. Press the knob several times, until the PATCH indicator lights up. 2 Turn the CATE ...

  • Roland JV-1010 - page 29

    29 Choosing and Playing Patches Quick Start Playing Percussion Sounds The JV-1010 has Rhythm Sets that contain a variety of percussion instruments and special effects sounds. With the JV-1010, you can use seven groups—User, Preset A through E, and Session—and when a Wave Expansion Board (separately available) is installed, you can also use the ...

  • Roland JV-1010 - page 30

    30 Choosing and Playing Patches To play rhythm sets using a MIDI keyboard, set the MIDI transmit channel for the MIDI keyboard to 10 . Here’s how you can play percussion instruments using rhythm sets: fig.1-19 1 Set the transmit channel for the MIDI keyboard (the transmitting instrument) to 10 . For information on how to make the settings, refer ...

  • Roland JV-1010 - page 31

    31 Quick Start Using the JV-1010 as the GM Sound Module The JV-1010 features a GM mode —a convenient way to play back or create GM score data (music files for GM sound module). You’re able to play back commercial GM score data releases and even modify various parameter settings for enhanced musical expression. Entering GM Mode Use GM mode to pl ...

  • Roland JV-1010 - page 32

    32 Changing Sounds from an External MIDI Device You can change patches, performances, and rhythm sets by transmitting Bank Select messages (Controller numbers 0 and 32) and Program Change messages to the JV-1010 from an external MIDI device. That is, selecting sounds on an external MIDI keyboard transmits messages corresponding to the specified sou ...

  • Roland JV-1010 - page 33

    33 Changing Sounds from an External MIDI Device Quick Start 2 Press the VALUE knob to choose the Patch mode ( PATCH ). Pressing the VALUE knob makes the mode change sequentially. Press the knob several times, until the PATCH indicator lights up. 3 Turn the PART knob and choose 1 . Here, 1 becomes the JV-1010’s receive channel. 4 Transmit a Bank S ...

  • Roland JV-1010 - page 34

    34 Changing Sounds from an External MIDI Device Changing a Performance When changing a performance, set the transmit channel of the external MIDI device and the Performance Control Channel (Perform Ctrl CH) of the JV-1010 to the same channel, then transmit the Bank Select and Program Change messages. Now let’s set the transmit channel on the exte ...

  • Roland JV-1010 - page 35

    35 Changing Sounds from an External MIDI Device Quick Start 6 Set the transmit channel on the external MIDI device to the same value that you selected for the Performance Control Channel (Perform Ctrl CH) in step 4. For information on how to make the settings, refer to the owner’s manual for the MIDI keyboard (the transmitting instrument). 7 Tran ...

  • Roland JV-1010 - page 36

    36 Changing Sounds from an External MIDI Device Changing a Rhythm Set When changing a rhythm set, set the transmit channel of the external MIDI device and the receive channel of part 10 of the performance on the JV-1010 to the same channel, then transmit the Bank Select and Program Change messages. Now let’s try changing the rhythm set from the e ...

  • Roland JV-1010 - page 37

    37 Changing Sounds from an External MIDI Device Quick Start 5 Transmit a Program Change message from the external MIDI device to the JV-1010 (refer to the following table). The correspondences between MIDI messages transmitted from external MIDI devices and Rhythm Set Numbers are as shown below. Rhythm Set Rhythm Set Bank Select Program Group Numbe ...

  • Roland JV-1010 - page 38

    38 Trying Out Desktop Music If you are running music software on your computer, you can use the computer to control the operation of the JV-1010. Of course, this allows you to play back and create song data, switch sounds automatically, and create sounds from the screen. This type of system is know as DTM (desktop music) . The actual DTM functions ...

  • Roland JV-1010 - page 39

    39 Trying Out Desktop Music Quick Start 2 Set the COMPUTER switch on the JV-1010’s rear panel to match the type of computer to be connected as described below. For Apple Macintosh computers: Mac For PCs: PC-2 fig.1-24.e The connection method described in the following step varies according to the type of computer; read the applicable section ( 3a ...

  • Roland JV-1010 - page 40

    40 Trying Out Desktop Music 4 Connect the other end of the computer cable to the JV-1010’s COMPUTER connector. fig.1-25.e Serial port (|O|O|) Apple Macintosh Optional computer cable RSC-15APL PC Optional computer cable RSC-15AT JV-1010 rear panel Modem Port or Printer Port Playing back sounds from the JV-1010 requires that the AC adaptor be plugg ...

  • Roland JV-1010 - page 41

    41 Trying Out Desktop Music Quick Start ■ Connecting with MIDI Connectors If you have a MIDI interface (such as Roland’s Super MPU64) connected to your computer or are connecting to a MIDI interface adaptor, you can then connect using the MIDI connectors. 1 Switch off the power to the JV-1010, the computer, and any connected equipment. 2 Set th ...

  • Roland JV-1010 - page 42

    42 Trying Out Desktop Music Performing Multiple Parts (Performance Mode) A group of sixteen parts to which fifteen patches and one rhythm set are assigned (fixed at Part 10) is collectively referred to as a Performance . fig.1-28.e In a performance, you can assign each patch and rhythm set to a part, then combine these parts to enjoy an ensemble pe ...

  • Roland JV-1010 - page 43

    43 Trying Out Desktop Music Quick Start 1 Press the VALUE knob to choose the Performance mode ( PERFORM ). Pressing the VALUE knob makes the mode change sequentially. Press the knob several times, until the PERFORM indicator lights up. 2 Turn the PART knob and choose 2 . 3 Set the transmit channel of the external device (the transmitting device) to ...

  • Roland JV-1010 - page 44

    44 Editing Using Only the JV-1010 Making Part Settings (PART) fig.1-30 Now try changing the level setting ( Level ) for PART 2 in Performance mode. fig.1-30a 1 Press the VALUE knob to choose the Performance mode ( PERFORM ). Pressing the VALUE knob makes the mode change sequentially. Press the knob several times, until the PERFORM indicator lights ...

  • Roland JV-1010 - page 45

    45 Editing Using Only the JV-1010 Quick Start 5 Turn the VALUE knob to change the level. This can be set in the range 000 – 127 . Pan , Coarse Tune , and other parameters can be set in the same way. For more detailed information about each parameter and its settings, refer to the Reference Manual that is on the included CD-ROM. 6 While holding do ...

  • Roland JV-1010 - page 46

    46 Editing Using Only the JV-1010 ■ Initializing GM Mode (GM Initialize) Using a computer or sequencer connected to the JV-1010 to play music data bearing the GM logo requires the system be initialized for GM. Carrying out this initialization restores the basic GM settings. fig.1-32 1 Press the VALUE knob to switch to the GM mode ( GM ). Pressing ...

  • Roland JV-1010 - page 47

    47 Editing Using Only the JV-1010 Quick Start ■ Initializing the Settings (Initialize) This restores the currently selected performance and rhythm set to standard settings. fig.1-33 1 Press the VALUE knob and choose the Performance mode ( PERFORM ) or the Rhythm Set mode ( RHYTHM ). Pressing the VALUE knob makes the mode change sequentially. Pres ...

  • Roland JV-1010 - page 48

    48 Editing Using Only the JV-1010 ■ Transmitting Settings to an External MIDI Device (Data Transfer) This transmits Performance settings to an external MIDI device. This is useful for times such as when you want to save data on a MIDI instrument ahead of time. Connect the JV-1010’s MIDI OUT connector to the MIDI IN connector of the external MID ...

  • Roland JV-1010 - page 49

    49 Editing Using Only the JV-1010 Quick Start Making System Settings (SYSTEM) This sets the tuning and other parameters of the JV-1010’s operating environment. fig.1-35 ■ Selecting the Receive Channel (Perform Ctrl CH) This selects the receive channel when MIDI messages are used to switch performances. fig.1-35a 1 Press the VALUE knob and choos ...

  • Roland JV-1010 - page 50

    50 Editing Using Only the JV-1010 ■ Tuning (Master Tune) Allows the sound generator to be tuned. The value indicated is the frequency of Note Number 69 (the A4 key). fig.1-36 1 Press the VALUE knob to switch to a mode other than the Patch mode ( PATCH ), that is, to the PERFORM , RHYTHM , or GM mode. 2 While holding down the VOLUME knob, press th ...

  • Roland JV-1010 - page 51

    51 Appendices Appendices ...

  • Roland JV-1010 - page 52

    52 Troubleshooting If no sound is produced, or if operation otherwise seems wrong, first check the following points. If after trying the following remedies, the unit still does not operate correctly, please contact your Roland dealer or the nearest Roland Service Center. * Refer to the “Error Messages” (p. 53) if some kind of message is display ...

  • Roland JV-1010 - page 53

    53 Appendices Error Messages An error message appears in the display when an error in operation occurs, or if an operation cannot be processed correctly. When this occurs, continue by following the instructions indicated in the error message. coE (MIDI Communication Error) fig.coE Situation: There is a problem with the MIDI cable connected to the J ...

  • Roland JV-1010 - page 54

    54 Patch List USER (User Group) PR-A (Preset A Group) No. Name Voice Key Assign 001 Tremendously 4 POLY 002 St.Concert 4 POLY 003 CyberTrance2 4 POLY 004 SessionNyln2 3 POLY 005 ViennaStrgs3 4 POLY 006 R&R Brass 3 POLY 007 Velo Power 4 POLY 008 Super Tenor 3 POLY 009 Breathy Humz 2 POLY 010 Ow Bass 1 SOLO 011 Dunes 4 POLY 012 Celestial 2 4 POLY ...

  • Roland JV-1010 - page 55

    55 Patch List Appendices PR-B (Preset B Group) PR-C (Preset C Group) No. Name Voice Key Assign 001 Dist Gtr 1 3 POLY 002 Dist Gtr 2 3 POLY 003 R&R Chunk 4 POLY 004 Phripphuzz 1 SOLO 005 Grungeroni 3 POLY 006 Black Widow 4 POLY 007 Velo-Wah Gtr 1 POLY 008 Mod-Wah Gtr 2 POLY 009 Pick Bass 1 SOLO 010 Hip Bass 2 POLY 011 Perc.Bass 3 SOLO 012 Homey ...

  • Roland JV-1010 - page 56

    56 Patch List PR-D (GM Group) PR-E (Preset E Group) No. Name Voice Key Assign 001 Piano 1 2 POLY 002 Piano 2 2 POLY 003 Piano 3 2 POLY 004 Honky-tonk 2 POLY 005 E.Piano 1 2 POLY 006 E.Piano 2 4 POLY 007 Harpsichord 2 POLY 008 Clav. 2 POLY 009 Celesta 1 POLY 010 Glockenspiel 2 POLY 011 Music Box 1 POLY 012 Vibraphone 1 POLY 013 Marimba 2 POLY 014 Xy ...

  • Roland JV-1010 - page 57

    57 Patch List Appendices XP-A (Session) No. Name Voice 001 St.Concert 4 002 9ft.Grand 1 4 003 9ft.Grand 2 4 004 Euro Classic 2 005 St.Pno & Str 4 006 Compress Pno 1 007 LA Session 4 008 Water Piano 4 009 Vibra Rhodes 3 010 Stack Rhodes 4 011 ArcoEnsemble 2 012 Vienna Strgs 3 013 Str Adagio 2 014 Oct Strings 3 015 Silky Filter 2 016 Soft Strings ...

  • Roland JV-1010 - page 58

    58 Patch Category List PIANO KEY&ORGAN (Piano Group) (Keyboard & Organ Group) PNO (AC.PIANO) Acoustic Piano No. Name Voice Preset No. 001 St.Concert 4 XP-A:001 002 9ft.Grand 1 4 XP-A:002 003 9ft.Grand 2 4 XP-A:003 004 Euro Classic 2 XP-A:004 005 DEMO Piano1 4 XP-A:231 006 DEMO Piano2 4 XP-A:232 007 64voicePiano 1 PR-A:001 008 Bright Piano 1 ...

  • Roland JV-1010 - page 59

    59 Patch Category List Appendices GUITAR/BASS (Guitar/Bass Group) AGT (AC.GUITAR) Acoustic Guitar No. Name Voice Preset No. 001 SessionNylon 3 XP-A:067 002 Nylon Gtr 1 PR-A:108 003 Nylon-str.Gt 1 PR-D:025 004 DEMO Nylon 4 XP-A:244 005 Solo Nylon 1 3 XP-A:068 006 Solo Nylon 2 2 XP-A:069 007 Nylon & Str 4 XP-A:070 008 Gtr Strings 3 PR-A:109 009 N ...

  • Roland JV-1010 - page 60

    60 Patch Category List ORCH/BRASS (Orchestra/Brass Group) STR (STRINGS) Strings No. Name Voice Preset No. 001 Str Adagio 2 XP-A:013 002 ArcoEnsemble 2 XP-A:011 003 Vienna Strgs 3 XP-A:012 004 Oct Strings 3 XP-A:014 005 Soft Strings 2 XP-A:016 006 GiantStrings 4 XP-A:018 007 St.Strings 2 PR-C:035 008 Warm Strings 4 PR-C:036 009 Somber Str 4 PR-C:037 ...

  • Roland JV-1010 - page 61

    61 Patch Category List Appendices SYNTH/PAD (Synth/Pad Group) HLD (HARD LEAD) Hard Synth Lead No. Name Voice Preset No. 001 Pulse Lead 1 1 PR-B:089 002 Little Devil 4 PR-B:091 003 Square Wave 2 PR-D:081 004 Sawteeth 3 PR-B:085 005 FXM Saw Lead 4 PR-B:084 006 Saw Wave 2 PR-D:082 007 Loud SynLead 4 PR-B:092 008 5th Saw Wave 3 PR-D:087 009 MG Solo 4 P ...

  • Roland JV-1010 - page 62

    62 Patch Category List SYNTH/PAD (Synth/Pad Group) SYN (OTHER SYNTH) Poly Synth No. Name Voice Preset No. 186 Poly Key 3 PR-A:062 187 Poly Saws 4 PR-A:063 188 Polysynth 2 PR-D:091 189 Poly Pulse 4 PR-A:064 190 Dual Profs 3 PR-A:065 191 Saw Mass 4 PR-A:066 192 Big Mess Pad 4 XP-A:140 193 Poly Split 4 PR-A:067 194 Poly Rock 4 PR-A:070 195 Puff 1080 2 ...

  • Roland JV-1010 - page 63

    63 Patch Category List Appendices ETHNIC RHYTHM&SFX (Ethnic Group) (Rhythm & Sound Effects Group) PLK (PLUCKED) Plucked (Harp etc.) No. Name Voice Preset No. 001 Sitar 2 PR-A:101 002 Drone Split 4 PR-A:102 003 Sitar 1 PR-D:105 004 Dulcimer 2 PR-A:105 005 Santur 2 PR-D:016 006 East Europe 2 PR-E:040 007 Dulcitar 4 PR-E:041 008 Harp On It 3 P ...

  • Roland JV-1010 - page 64

    64 Rhythm Set List 35 39 40 41 43 45 47 42 44 46 36 38 37 87 88 84 86 85 51 52 53 55 57 59 54 56 58 48 50 49 63 64 65 67 69 71 66 68 70 60 62 61 75 76 77 79 81 83 78 80 82 72 74 73 C2 C3 C4 C5 C6 Note No. 89 91 93 95 90 92 94 96 98 97 C7 USER (User) PR-A (Preset A Group) PR-B (Preset B Group) 001 HouseDrumSet 1 Scratch 1 808 SN Dry Stick 808 SN 808 ...

  • Roland JV-1010 - page 65

    65 Rhythm Set List Appendices 35 39 40 41 43 45 47 42 44 46 36 38 37 87 88 84 86 85 51 52 53 55 57 59 54 56 58 48 50 49 63 64 65 67 69 71 66 68 70 60 62 61 75 76 77 79 81 83 78 80 82 72 74 73 C2 C3 C4 C5 C6 Note No. 89 91 93 95 90 92 94 96 98 97 C7 PR-C (Preset C Group) PR-D (GM Group) PR-E (Preset E Group) 001 JazzDrumSet2 Round Kick Old Kick Side ...

  • Roland JV-1010 - page 66

    66 Rhythm Set List 35 39 40 41 43 45 47 42 44 46 36 38 37 87 88 84 86 85 51 52 53 55 57 59 54 56 58 48 50 49 63 64 65 67 69 71 66 68 70 60 62 61 75 76 77 79 81 83 78 80 82 72 74 73 C2 C3 C4 C5 C6 Note No. 89 91 93 95 90 92 94 96 98 97 C7 XP-A (Session) 001 SessionSet 1 Deep Kick 3 Mix Kick Side Stick Solo Snr HC2 Claps 1 90’s Snare Verb Tom Lo Cl ...

  • Roland JV-1010 - page 67

    67 Appendices Performance List USER (User Group) PR-A (Preset A Group) PR-B (Preset B Group) No. Name Key Mode 01 EasternSplit LAYER 02 Opening Orch LAYER 03 Feedback EP LAYER 04 Humming Vox LAYER 05 Tekno Loop 1 LAYER 06 Fr.Horn Sect LAYER 07 SpaceCarrier LAYER 08 Orchestral LAYER 09 Nebular Vox LAYER 10 Terminator LAYER 11 Flying Jazz LAYER 12 Sw ...

  • Roland JV-1010 - page 68

    68 MIDI Implementation Model: JV-1010 (64 Voice Synthesizer Module) Version: 1.00 Date: Jan. 28 1999 1. Data Reception ■ Channel Voice Messages ● Note Off status 2nd byte 3rd byte 8nH kkH vvH 9nH kkH 00H n=MIDI channel number: 0H - FH (ch.1 - ch.16) kk=note number: 00H - 7FH (0 - 127) vv=Note Off velocity: 00H - 7FH (0 - 127) * Not received in ...

  • Roland JV-1010 - page 69

    69 MIDI Implementation Appendices ❍ Panpot (Controller number 10) status 2nd byte 3rd byte BnH 0AH vvH n=MIDI channel number: 0H - FH (ch.1 - ch.16) vv=Panpot: 00H - 40H - 7FH (left - center - right) * Adjust the stereo location over 128 steps, where 0 is far left, 64 is center, and 127 is far right. However this is not received when the Pan Cont ...

  • Roland JV-1010 - page 70

    70 MIDI Implementation ❍ Effect 3 (Chorus Send Level) (Controller number 93) status 2nd byte 3rd byte BnH 5DH vvH n=MIDI channel number: 0H - FH (ch.1 - ch.16) vv=Chorus Send Level: 00H - 7FH (0 - 127) * In Performance mode, the Chorus Send Level parameter of each Part will change. ❍ RPN MSB/LSB (Controller number 100,101) status 2nd byte 3rd b ...

  • Roland JV-1010 - page 71

    71 MIDI Implementation Appendices ● Omni On (Controller number 125) status 2nd byte 3rd byte BnH 7DH 00H n=MIDI channel number: 0H - FH (ch.1 - ch.16) * The same processing as when All Note Off is received will be done. The instrument will not be set to OMNI ON. * Not received in Performance mode if the Receive Switch (PERFORM/PART) is OFF. ● M ...

  • Roland JV-1010 - page 72

    72 MIDI Implementation ● Data Transmission This instrument can use exclusive messages to exchange many varieties of internal settings with other devices. The model ID of the exclusive messages used by this instrument is 6AH. ❍ Data Request 1 RQ1 This message requests the other device to transmit data. The address and size indicate the type and ...

  • Roland JV-1010 - page 73

    73 MIDI Implementation Appendices ❍ RPN MSB/LSB (Controller number 100, 101) status 2nd byte 3rd byte BnH 65H mmH BnH 64H llH n=MIDI channel number: 0H - FH (ch.1 - ch.16) mm=MSB of the parameter number specified by RPN ll=LSB of the parameter number specified by RPN <<< RPN >>> Control Changes include RPN (Registered Parameter ...

  • Roland JV-1010 - page 74

    74 MIDI Implementation 3. Parameter Address Map 1. JV-1010 (Model ID=6AH) * For addresses marked by a #, the data must be divided into 2 parts for transmission. For example, data with the hexadecimal value ABH would be divided into 0AH and 0BH, and transmitted in that order. * Parameter values enclosed in < > are for the JV-1080 / JV-2080 / X ...

  • Roland JV-1010 - page 75

    75 MIDI Implementation Appendices | 00 33 | 0000 000a | Pedal(1) Polarity 0 - 1 *17 | | 00 34 | 0aaa aaaa | Pedal2 Assign 1 - 104 *15 | | 00 35 | 0000 00aa | Pedal2 Output Mode 0 - 3 *16 | | 00 36 | 0000 000a | Pedal2 Polarity 0 - 1 *17 | | 00 37 | 0aaa aaaa | C1 Assign 1 - 97 *18 | | 00 38 | 0000 00aa | C1 Output Mode 0 - 3 *16 | | 00 39 | 0aaa aa ...

  • Roland JV-1010 - page 76

    76 MIDI Implementation ● 1-2.Performance +——————————————————————————————————————————————————————————————————————————————+ | Offset | | | Address | Description | |—————————— ...

  • Roland JV-1010 - page 77

    77 MIDI Implementation Appendices ● 1-2-2.Performance Part +——————————————————————————————————————————————————————————————————————————————+ | Offset | | | Address | Size | Description Data (Va ...

  • Roland JV-1010 - page 78

    78 MIDI Implementation |—————————————+———————————+————————————————————————————————————————————————————| |# 00 2C | 0000 aaaa | Patch Tempo 20 - 250 | | | 0000 bbbb | | | 00 2E | 0aaa aaaa | Patch Le ...

  • Roland JV-1010 - page 79

    79 MIDI Implementation Appendices |—————————————+———————————+————————————————————————————————————————————————————| | 00 2D | 0000 0aaa | LFO1 Waveform 0 - 7 *10 | | 00 2E | 0000 000a | LFO1 Key Sync ...

  • Roland JV-1010 - page 80

    80 MIDI Implementation *16 -100–+150 *17 -100, -70, -50, -40, -30, -20, -10, 0, +10, +20, +30, +40, +50, +70, +100 *18 OFF, LPF, BPF, HPF, PKG *19 LOWER, UPPER, LOWER&UPPER, ALL *20 MIX, EFX, <DIRECT-1>, <DIRECT-2> ● 1-4.Rhythm Setup +———————————————————————————————? ...

  • Roland JV-1010 - page 81

    81 MIDI Implementation Appendices *1 INT, <PCM>, EXP *2 -6, 0, +6, +12 *3 NO-SUS, SUSTAIN *4 OFF, CONTINUOUS, KEY-ON *5 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1000, 1100, 1200 *6 -100–+150 *7 -100, -70, -50, -40, -30, -20, -10, 0, +10, +20, +30, +40, +50, +70, +100 *8 O ...

  • Roland JV-1010 - page 82

    82 MIDI Implementation 2. GS (Model ID = 42H) +—————————————————————————————————————————————————————————————————————————————+ | Start | | | address | Description | |——————————? ...

  • Roland JV-1010 - page 83

    83 MIDI Implementation Appendices 4. Supplementary Material ■ Correspondence of the EFX algorithm and Exclusive Address (EFX Parameter 1–12) EFX | Parameter | Value ———————+————————————————————————————————+————————————————————? ...

  • Roland JV-1010 - page 84

    84 MIDI Implementation ● Type17: STEREO-DELAY ———————+————————————————————————————————+——————————————————————— prm1 | Feedback Mode | 0 - 1 prm2 | Delay Time Left | 0 - 126 prm3 | Delay Time Right | 0 - 126 prm4 | Feedback P ...

  • Roland JV-1010 - page 85

    85 MIDI Implementation Appendices ● Type33: ENHANCER → FLANGER (serial) ———————+————————————————————————————————+——————————————————————— prm1 | Enhancer Sens | 0 - 127 prm2 | Enhancer Mix Level | 0 - 127 prm3 | Flanger Pre ...

  • Roland JV-1010 - page 86

    86 MIDI Implementation ■ Examples of Actual MIDI Messages <Example 1> 92 3E 5F 9n is the Note On status and `n' is the MIDI channel number. Since 2H = 2, 3EH = 62, and 5FH = 95, this is a Note On message of MIDI CH = 3, note number 62 (note name D4) and velocity 95. <Example 2> CE 49 CnH is the Program Change status and `n' ...

  • Roland JV-1010 - page 87

    87 MIDI Implementation Appendices <Example 3> Retrieving data for Temporary Performance (RQ1) *W hen a data transfer is executed in Utility mode, data that is accessed will be the same as that which is transmitted when the Type parameter is set to PERFORM and the Source parameter is set to TEMP: -PATCH The “Parameter Address Map” gives th ...

  • Roland JV-1010 - page 88

    88 Function... Basic Channel Mode Note Number : Velocity After Touch Pitch Bend Control Change Program Change System Exclusive System Common System Real Time Aux Messages Notes Transmitted Recognized Remarks Default Changed Default Messages Altered True Voice Note On Note Off Key's Channel's 0, 32 1 2 4 5 6, 38 7 8 10 11 64 65 66 67 69 71 ...

  • Roland JV-1010 - page 89

    89 Appendices Specifications JV-1010: 64 Voice Synthesizer Module (Conforms to General MIDI System) ● Number of Parts 16 (Part 10 is Rhythm Part) ● Maximum Polyphony 64 voices ● Effects EFX: 40 sets Reverb: 1 set (8 types) Chorus: 1 set ● Preset Memory Patches: 895 (640 same as the JV-2080 + 255 from “Session”) Performances: 64 Rhythm S ...

  • Roland JV-1010 - page 90

    90 Computer Cable Wiring Diagrams 67 8 34 5 12 67 8 34 5 12 67 8 34 5 12 mini DIN, 8-pin, male mini DIN, 8-pin, male mini DIN, 8-pin, male D-sub, 25-pin, female mini DIN, 8-pin, male mini DIN, 8-pin, male 1 HSKo 2 HSKi 3 TXD- 4 GND 5 RXD- 6 TXD+ 7 GPi 8 RXD+ HSKo 1 HSKi 2 TXD- 3 GND 4 RXD- 5 TXD+ 6 GPi 7 RXD+ 8 67 8 34 5 12 mini DIN, 8-pin, male D- ...

  • Roland JV-1010 - page 91

    91 Index A AC adaptor jack ........................................................ 12, 19 C CATEGORY/BANK knob ............................................ 11 Computer cable .............................................................. 40 COMPUTER connector ..................................... 12, 19, 40 COMPUTER switch ......................... ...

  • Roland JV-1010 - page 92

    92 Index R Rack-mount adaptor ...................................................... 14 Receive channel .............................................................. 49 RHYTHM ........................................................................ 30 Rhythm set ...................................................................... 29 Changing a r ...

  • Roland JV-1010 - page 93

    93 For the USA FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equ ...

  • Roland JV-1010 - page 94

    94 Information When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below. As of January 1, 2002 (Roland) ARGENTINA Instrumentos Musicales S.A. Av.Santa Fe 2055 (1123) Buenos Aires ARGENTINA TEL: (011) 4508-2700 BRAZIL Roland Brasil Ltda Rua San Jose, 780 Sala B Parque Indus ...

  • Roland JV-1010 - page 95

    ...

  • Roland JV-1010 - page 96

    01891601 ’02-2-AE2-61N ...

Manufacturer Roland Category Recording Equipment

Documents that we receive from a manufacturer of a Roland JV-1010 can be divided into several groups. They are, among others:
- Roland technical drawings
- JV-1010 manuals
- Roland product data sheets
- information booklets
- or energy labels Roland JV-1010
All of them are important, but the most important information from the point of view of use of the device are in the user manual Roland JV-1010.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Roland JV-1010, service manual, brief instructions and user manuals Roland JV-1010. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Roland JV-1010.

Similar manuals

A complete manual for the device Roland JV-1010, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Roland JV-1010 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Roland JV-1010.

A complete Roland manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Roland JV-1010 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Roland JV-1010, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Roland JV-1010, that we can find in the current document
3. Tips how to use the basic functions of the device Roland JV-1010 - which should help us in our first steps of using Roland JV-1010
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Roland JV-1010
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Roland JV-1010 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Roland JV-1010?

Use the form below

If you did not solve your problem by using a manual Roland JV-1010, ask a question using the form below. If a user had a similar problem with Roland JV-1010 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (1)

Hupas Manfred

Wo bekommt mann eine deutsche Bedienungsanleitung von Roland jv 1010 64 voice synthesizer