English dropdown-ico

Manual Hobart D Series

12 pages 1.47 mb
Download

Go to site of 12

Summary
  • Hobart D Series - page 1

    I N S T R U C T I O N S FORM 18261 Rev. E (Jan. 2002) D SERIES REACH-IN REFRIGERA T ORS & FREEZERS D SERIES REACH-INS 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 937 332-3000 www.hobartcorp.com ...

  • Hobart D Series - page 2

    –2– © HOBART CORPORATION, 1991 D Series Reach-In Refrigerators & Freezers INST ALLA TION UNPACKING Immediately after unpacking the reach-in, check for possible shipping damage. If this unit is found to be damaged after unpacking, save the packaging material and contact the carrier within 15 days of delivery. Prior to installation, test the ...

  • Hobart D Series - page 3

    –3– ASSEMBLY Some components can be removed to allow the cabinet to pass through short or narrow doorways. The door handle can be removed as follows: 1. If the adhesive-backed trim pieces are damaged during removal, new ones can be purchased from Hobart. The adhesive-backed trim pieces on the top and bottom of the handles need to be peeled off ...

  • Hobart D Series - page 4

    – 4 – LEGS OR CASTERS WARNING : THE CABINET MUST BE BLOCKED AND STABLE BEFORE INSTALLING LEGS OR CASTERS. Legs (Fig. 4) To install the legs, raise and block the reach-in a minimum of 7" from the floor and thread the legs into the threaded holes on the bottom of the cabinet. The unit must be level in order to operate properly. Turn the adju ...

  • Hobart D Series - page 5

    – 5 – Condensate Evaporator D Series units are equipped with an automatic condensate evaporator that requires no drain connection. ELECTRICAL CONNECTIONS (Cord Connected Reach-Ins) 120Volt, 60 Hertz, 1 Phase WARNING : THIS MACHINE IS PROVIDED WITH A THREE-PRONGED GROUNDING PLUG. THE OUTLET TO WHICH THIS PLUG IS CONNECTED MUST BE PROPERLY GROUND ...

  • Hobart D Series - page 6

    – 6 – ELECTR ONIC DEFROST TIMER (when equipped) If your freezer is equipped with an electronic Defrost Timer, it is located in a control box behind the trim rail at the top of the Reach-In Freezer. To access the the Defrost Timer, remove the Thumbscrew on the left side of the Control Box and slide the Lid to the left (Fig. 8). Save the Thumbscr ...

  • Hobart D Series - page 7

    – 7 – To Change the Defrost Duration and Bypass the Setting of the Time Clock Begin with the SET CLOCK light blinking rapidly, indicating normal Operation Mode . . . If you want to change the Defrost Duration but not reset the time-of-day, press and hold the PROGRAM button for about 3 seconds until the PROGRAM light starts blinking. Release the ...

  • Hobart D Series - page 8

    – 8 – How to Set a Custom Defrost Schedule Begin with the defrost timer on normal Operation Mode: The SET CLOCK light is blinking rapidly and the PROGRAM and DEFROST ON lights are off. If all switches are OFF (Fig. 12), the factory preset defrost schedule is enabled: 2 AM , 8 AM , 2 PM , 8 PM . • Determine your own best defrost schedule. The ...

  • Hobart D Series - page 9

    – 9 – Program Review During normal Operation Mode, with the SET CLOCK light blinking rapidly . . . Press the SET button until the SET CLOCK, PROGRAM and DEFROST ON lights are lit; then release the SET button and all three lights go off for two seconds. After that, all three lights begin to blink. The number of blinks of a light corresponds to t ...

  • Hobart D Series - page 10

    – 10 – If the Defrost Timer's Battery Loses Power If the SET CLOCK, PROGRAM and DEFR OST ON lights are all blinking (Fig. 15), the backup po wer supply (batter y) to the Defrost Timer has weak ened. Estimated batter y life is 10 y ears. The timer can continue to function nor mally after the battery has weakened if the timer is reprog ramme ...

  • Hobart D Series - page 11

    – 11 – Fig. 16 DEFROST TIMER — Freezer units built between 1991 and 1997 were equipped with a defrost timer (Fig. 16) preset for four 23 – 25 minute defrost cycles per day (every 6 hours). By inserting a screwdriver into the large hole in the bracket and turning clockwise, the time of day that these cycles occur may be adjusted. MECHANICAL ...

  • Hobart D Series - page 12

    – 12 – FORM 18261 Rev. E (Jan. 2002) PRINTED IN U.S.A. MAINTENANCE CLEANING Cabinet Clean the inside of the cabinet and the doors weekly with a warm water solution of mild household liquid dishwashing detergent (such as Palmolive green or Ivory). Do not use anything containing grit, abrasive materials, bleach or harsh chemicals. Be cautious wit ...

Manufacturer Hobart Category Refrigerator

Documents that we receive from a manufacturer of a Hobart D Series can be divided into several groups. They are, among others:
- Hobart technical drawings
- D Series manuals
- Hobart product data sheets
- information booklets
- or energy labels Hobart D Series
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hobart D Series.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hobart D Series, service manual, brief instructions and user manuals Hobart D Series. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hobart D Series.

Similar manuals

A complete manual for the device Hobart D Series, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hobart D Series by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hobart D Series.

A complete Hobart manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hobart D Series - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hobart D Series, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hobart D Series, that we can find in the current document
3. Tips how to use the basic functions of the device Hobart D Series - which should help us in our first steps of using Hobart D Series
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hobart D Series
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hobart D Series in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hobart D Series?

Use the form below

If you did not solve your problem by using a manual Hobart D Series, ask a question using the form below. If a user had a similar problem with Hobart D Series it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)