English dropdown-ico

Manual Danby DKC445BL

15 pages 0.3 mb
Download

Go to site of 15

Summary
  • Danby DKC445BL - page 1

    Model • Modèle• Modelo DKC445BL For service, contact your nearest service depot or call: 1-800-26- Danby (1-800-263-2629) to recommend a depot in your area. En cas de réparation, veuillez contacter votre service après-vente le plus près ou communiquez au: 1-800-26- Danby (1-800-263-2629) pour connaître le service après-vente le plus proch ...

  • Danby DKC445BL - page 2

    OWNER’S MANUAL MANUEL D'UTILISATION MANUAL DEL PROPIETARIO Model • Modèle• Modelo DKC445BL CAUTION: Read and follow all safety rules and operating instructions before first use of this product. PRÉCAUTION: V euillez lire attentivement les consignes de sécurité et les instructions d'utilisation avant l'utilisation initiale d ...

  • Danby DKC445BL - page 3

    T ABLE OF CONTENTS Before putting appliance into use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 W e care for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 T ips for energy savings . . . . . . . . . . . . . . . . . . ...

  • Danby DKC445BL - page 4

    2 BEFORE PUTTING APPLIANCE INTO USE • Before connecting the appliance to any electrical power supply, leave it standing (upright) for about 2 hours. This will reduce the possibility of malfunctions in the cooling system due to transport handling. • Clean the appliance thoroughly, both interior and exterior. (See Cleaning and Maintenance) WE CAR ...

  • Danby DKC445BL - page 5

    3 Instructions pertaining to the risk of fire, electric shock, or injury to persons. GROUNDING INSTRUCTIONS For your personal safety, this appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped w ...

  • Danby DKC445BL - page 6

    1 Chrome Rail (for attachment to Worktop) 4 Self-Tapping Screws (to attach chrome rail) 1 CO2 Cylinder Support Stand 1 CO2 Cylinder (empty) 1 CO2 Regulator (high/low pressure gauges) 1 CO2 Air Line Hose (red) 2 CO2 Air Line Hose Connectors (black) 1 Beer Keg Coupler 1 Beer T ower Unit (complete with faucet, hose and wing nut) 1 Rubber Washer (to be ...

  • Danby DKC445BL - page 7

    CHILL'N TAP ASSEMBL Y INSTRUCTIONS: 5 1. Remove Worktop: Using a Phillips Screwdriver, remove the three screws located on the front underside edge of the worktop and the three screws located at the rear (back) side of the worktop. See Fig's. 1 & 2 Remove the worktop from the cabinet and position the worktop on top of the cabinet so th ...

  • Danby DKC445BL - page 8

    6 CHILL'N TAP ASSEMBL Y INSTRUCTIONS CON’T 8. Installation of CO2 Air Line inside Cabinet: Remove rubber plug located at the exterior (top right hand corner) of the cabinet. (store this plug in a safe place, it will be required when converting your unit back to a basic refrigerator) Insert the open end of the air line into the cabinet throug ...

  • Danby DKC445BL - page 9

    7 CHILL'N TAP ASSEMBL Y INSTRUCTIONS CON’T 1 6 . Installation of the Keg Coupler: IMPORT A N T N O T I C E ; Make sure the black pull handle of the keg coupler is in the "upward" (closed) position before installing on the beer keg. See Fig. 9 Insert the keg coupler into the locking neck of the beer keg and apply a 1/4 turn clockwis ...

  • Danby DKC445BL - page 10

    8 HOW TO REPLACE AN EMPTY CO2 CYLINDER 1. Close the main cylinder valve (A) by turning in a clockwise direction. See Fig.13 2. Close the secondary shut-off valve (C) by turning to "horizontal" (east/west) position on lower stem pipe. See Fig.13 3. Remove the air line clamp and hose from the regulator . 4. Remove the regulator assembly (E) ...

  • Danby DKC445BL - page 11

    9 CHANGING THE DIRECTION OF THE DOOR OPENING (SWING) If you find the direction of the door swing on your appliance inconvenient, you can change it to the opposite side. Simply follow the steps listed below . 1. Lay the unit on it's back. 2. Remove the adjustable leveling leg from the lower right hinge. 3. Remove two (2) screws from the lower d ...

  • Danby DKC445BL - page 12

    10 HELPFUL HINTS TO ASSIST YOU IN SERVING THE PERFECT GLASS OF COLD BEER STORAGE AND HANDLING: • Draught Beer should be treated as a food product. In most instances draught beer is not pasteurized. It is very important that you store and handle it properly . • Draught Beer should be immediately stored in a refrigerated cabinet. • Draught Beer ...

  • Danby DKC445BL - page 13

    11 KEG SIZES There are two(2) standard size beer kegs that can be used in your Chill 'N T ap Keg Cooler. 30 Liter Keg (1/4 Barrel) yields 3-1/2 cases (1056ozs) of beer. (Keg Weight 91lbs Full) 20 Liter Keg ( 1/6 Barrel) yields 2-1/2 cases (704ozs) of beer (Keg Weight 54lbs Full) Note: The keg stand is required only when using the 30 liter size ...

  • Danby DKC445BL - page 14

    12 CONVERTING THE CHILL 'N TAP KEG COOLER T O A BASIC "ALL REFRIGERA TOR": The Chill 'N T ap Keg Cooler is designed to offer you quick and easy conversion from a beer dispensing unit to a basic compact "All Refrigerator" application. Simply follow the below steps; 1. Close the main valve on the CO2 cylinder . 2. Close ...

  • Danby DKC445BL - page 15

    LIMITED PRODUCT WARRANTY This quality product is warranted to be free from manufacturer ’s defects in material and workmanship, provided that the unit is used under the normal operating conditions intended by the manufacturer . This warranty is available only to the person to whom the unit was originally sold by Danby or by an authorized distribu ...

Manufacturer Danby Category Beverage Dispenser

Documents that we receive from a manufacturer of a Danby DKC445BL can be divided into several groups. They are, among others:
- Danby technical drawings
- DKC445BL manuals
- Danby product data sheets
- information booklets
- or energy labels Danby DKC445BL
All of them are important, but the most important information from the point of view of use of the device are in the user manual Danby DKC445BL.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Danby DKC445BL, service manual, brief instructions and user manuals Danby DKC445BL. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Danby DKC445BL.

Similar manuals

A complete manual for the device Danby DKC445BL, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Danby DKC445BL by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Danby DKC445BL.

A complete Danby manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Danby DKC445BL - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Danby DKC445BL, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Danby DKC445BL, that we can find in the current document
3. Tips how to use the basic functions of the device Danby DKC445BL - which should help us in our first steps of using Danby DKC445BL
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Danby DKC445BL
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Danby DKC445BL in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Danby DKC445BL?

Use the form below

If you did not solve your problem by using a manual Danby DKC445BL, ask a question using the form below. If a user had a similar problem with Danby DKC445BL it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)