Manual Husqvarna 3120K

24 pages 0.72 mb
Download

Go to site of 24

Summary
  • Husqvarna 3120K - page 1

    Operator ’ s Manual (EP A) 3120K 101 91 79-95 Read these instructions carefully and make sure you understand them before using the machine. ...

  • Husqvarna 3120K - page 2

    2 – English WARNING! The power cutter can be dangerous! Careless and incorrect use can result in serious or fatal injury to the operator or others. SYMBOL EXPLANA TION Symbols on the power cutter: Please read the instructions carefully and make sure you understand them before using the power cutter. Always wear: • Approved protective helmet • ...

  • Husqvarna 3120K - page 3

    English – 3 CONTENTS List of Contents Symbol explanation ..................................................... 2 Safety instructions Personal protective equipment ....................................... 4 The power cutter ’ s safety equipment ...................... 4 Control, maintenance and service of the machine ‘ s safety equipment ....... ...

  • Husqvarna 3120K - page 4

    4 – English ! SAFETY INSTRUCTIONS ! ! WARNING! Incorrect or careless use of a power cutter can turn it into a dangerous tool that can cause serious or even fatal injury. It is extremely important that you read and understand this manual. PERSONAL PROT ECTIVE EQU I PMEN T WARNING! When using a power cutter, protective equipment approved by the app ...

  • Husqvarna 3120K - page 5

    English – 5 1 Anti-vibration system Check the anti-vibration elements regularly for material cracks and deformation. Check that the anti-vibration elements are securely mounted between the engine unit and the handle system. The muffler is designed to give the lowest possible noise level and to direct the engine ‘ s exhaust fumes away from the u ...

  • Husqvarna 3120K - page 6

    6 – English SAFETY INSTRUCTIONS 4 Blade guard for the cutting blade Never use a defective blade guard or a blade guard that is not fitted correctly. ! ! WARNING! Check that the cutting blade is fitted correctly and does not show signs of damage. A damaged cutting blade can cause personal injury. WARNING! Never use a power cutter with defective sa ...

  • Husqvarna 3120K - page 7

    English – 7 SAFETY INSTRUCTIONS ! GENERAL WORKING INSTRUCTIONS This section takes up the basic safety precautions for working with the power cutter. Follow these general working instructions, but never use a machine without the possibility of calling for help in the event of an accident. Basic safety precautions IMPORTANT INFORMATION! Never work ...

  • Husqvarna 3120K - page 8

    8 – English Cutting technique The technique described below is of a general character. Check information for each blade regarding individual cutting characte- ristics. (For example, a diamond blade requires less feeding pressure than a abrasive blade). 1. Support the work piece in such away that you can predict what will happen and so it will not ...

  • Husqvarna 3120K - page 9

    English – 9 SAFETY INSTRUCTIONS Pull in Pull in occurs when the lower part of the blade is suddenly stopped or when the cut closes. (To avoid this see the section ” How to avoid kickback ” and ” Pinching/rotation ” below). Pinching/rotation Pinching occurs when the cut closes. The power cutter can be drawn suddenly and powerfully downward ...

  • Husqvarna 3120K - page 10

    10 – English SAFETY INSTRUCTIONS CUTTING BLADES Abrasive blades The cutting material in an abrasive blade consists of abrasive corn that is held together by an organic bonding agent. ” Reinforced blades ” are made up of a fabric or fibre base that prevents total breakage at maximum working speed if the blade should be cracked or damaged. (The ...

  • Husqvarna 3120K - page 11

    English – 11 SAFETY INSTRUCTIONS Using diamond blades Proceed as follows: • Let the blade rotate in the same direction as the arrow indicates. • Cool continually with water. • Keep the blade sharp. • Remove the blade when transporting the cutter. Avoid: • Running the blade in the wrong direction. • Forcing a dull blade or wedging the ...

  • Husqvarna 3120K - page 12

    12 – English WHA T IS WHA T? 1. Cylinder cover 2. Muffler 3. Fuel tank 4. Starter throttle catch 5. Choke 6. Throttle trigger lockout 7. Stop switch 8. Cutting head 9. Cutting arm 10. Belt tensioning screw 11. Cutting blade 12. Throttle control 13. Combination spanner 14. Air filter cover 15. Blade guard 16. Starter handle 17. Operator ’ s manu ...

  • Husqvarna 3120K - page 13

    English – 13 Fitting the cutting head Remove the bolts (1). Remove the cover. Fit the drive belt over the clutch drum. Refit the cover and tighten the bolts. Feed the drive belt over the pulley on the cutting head (2). Slide on the belt cover and secure the cutting head together with the belt guard. Tighten both bolts (4) by hand. Screw in the te ...

  • Husqvarna 3120K - page 14

    14 – English FUEL HANDLING ! Fuelling WARNING!The following precautions reduce the risk of fire: • Do not smoke or place any sources of heat in the vicinity of the fuel. • Never refuel when the engine is running. • Open the fuel cap slowly when fuelling so that any over pressure is released slowly. • Tighten the fuel cap carefully after r ...

  • Husqvarna 3120K - page 15

    English – 15 A Start and stop WARNING! Before starting observe the following: • Do not start the power cutter without the cutting arm or cutting head fitted. Otherwise the clutch can come loose and cause personal injury. • Always move the power cutter from the filling area before starting. • Ensure that you and the machine stand firmly and ...

  • Husqvarna 3120K - page 16

    16 – English Changing the drive belt • Loosen the two bolts (A). • Turn the tensioning screw(B) until the tension has been released. • Remove the two bolts (A). • Remove the front belt cover (C). • Remove the belt from the pulley. • Dismantle the cutting head. • Remove the nut (D). Remove the side cover. • Replace the drive belt. ...

  • Husqvarna 3120K - page 17

    English – 17 MAINTENANCE Carburetor Your HUSQVARNA product has been designed and manufactured to specifications that reduce harmful emissions. After your unit has been run 8-10 tanks of fuel the engine has broken in. To ensure that your unit is at peak performance and producing the least amount of harmful emissions after break in, have your autho ...

  • Husqvarna 3120K - page 18

    18 – English MAINTENANCE Fuel filter • The fuel filter sits inside the fuel tank. • The fuel tank must be protected from contamination when filling. This reduces the risk of operating disturbances caused by blockage of the fuel filter. • The filter cannot be cleaned but must be replaced with a new filter when it blocked. The filter should b ...

  • Husqvarna 3120K - page 19

    English – 19 Replacing a broken or worn starter cord • Loosen the bolts that hold the starter against the crankcase and lift off the starter unit. • Pull out the cord approx. 30 cm and lift it out of the cut- out in the starter-pulley ’ s periphery. Reset the recoil spring by allowing the pulley to slowly rotate backwards. • Loosen the sc ...

  • Husqvarna 3120K - page 20

    20 – English Cooling system To maintain as low an operating temperature as possible the power cutter is equipped with a cooling system. The cooling system consists of: 1. An air intake on the starter unit. 2. Air flow guide. 3. Cooling fins on the flywheel. 4. Cooling fins on the cylinder 5. Cylinder cover (leads cold air onto the cylinder). Clea ...

  • Husqvarna 3120K - page 21

    English – 21 MAINTENANCE Below follows some general maintenance instructions. If you need further information please contact your service workshop. W eekly maintenance 9. Check the back-up paper filter. 10. Check that the handles and the anti-vibration elements are not damaged. 11. Clean the spark plug. Check that the electrode gap is 0.5 mm. 12. ...

  • Husqvarna 3120K - page 22

    22 – English TECHNICAL DA T A ´*31•¶5}¨ Engine Cylinder volume, cm 3/ cu.in Cylinder bore, mm/inch Stroke, mm/inch Idle speed, rpm Recommended max. speed, unloaded, rpm Power, kW Ignition system Manufacturer Spark plug Electrode gap, mm/inch Fuel and lubrication system Manufacturer Carburettor type Fuel capacity, litre/US Pint Weight Without ...

  • Husqvarna 3120K - page 23

    English – 23 FEDERAL AND CALIFORNIA EMISSION CONTROL W ARRANTY ST A TEMENT YOUR W ARRANTY RIGHTS AND OBLIGA TIONS The EPA (The US Environmental Protection Agency), CARB (California Air Resources Board) and Husqvarna Forest & Garden are pleased to explain the emissions control system warranty on your 1999 and later small off-road/nonroad engin ...

  • Husqvarna 3120K - page 24

    ´*31•¶5}¨ 2000W51 ...

Manufacturer Husqvarna Category Saw

Documents that we receive from a manufacturer of a Husqvarna 3120K can be divided into several groups. They are, among others:
- Husqvarna technical drawings
- 3120K manuals
- Husqvarna product data sheets
- information booklets
- or energy labels Husqvarna 3120K
All of them are important, but the most important information from the point of view of use of the device are in the user manual Husqvarna 3120K.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Husqvarna 3120K, service manual, brief instructions and user manuals Husqvarna 3120K. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Husqvarna 3120K.

Similar manuals

A complete manual for the device Husqvarna 3120K, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Husqvarna 3120K by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Husqvarna 3120K.

A complete Husqvarna manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Husqvarna 3120K - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Husqvarna 3120K, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Husqvarna 3120K, that we can find in the current document
3. Tips how to use the basic functions of the device Husqvarna 3120K - which should help us in our first steps of using Husqvarna 3120K
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Husqvarna 3120K
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Husqvarna 3120K in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Husqvarna 3120K?

Use the form below

If you did not solve your problem by using a manual Husqvarna 3120K, ask a question using the form below. If a user had a similar problem with Husqvarna 3120K it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)