Manual Quantum 1103 Series

47 pages 5.32 mb
Download

Go to site of 47

Summary
  • Quantum 1103 Series - page 1

    *infmanu3675* QUANTUM SERIES Including Model: Quantum 1 103 Ultra 2SP Pride keeps a mor e detailed r e port on file at the factory . Date Inspected Inspector Quality Control – Quantum 1 103 Ultra Series Inclusion of all Par ts Joystick Seri al Number Controller Seria l Number Left Motor Seria l Number Right Motor Serial Number Fit and Finish Per ...

  • Quantum 1103 Series - page 2

    WARNING! A Quantum Re hab Provider or a qualifie d technician must perform the initial setup of this power chair and must perform all of the procedures in this manual. The symbols below are used throughout this owner’s manua l and on the power chair to identify warnings and important information. It is very important for you to read them and unde ...

  • Quantum 1103 Series - page 3

    Quantum 1103 Ultra www. pridemobility.com 3 I. INTRODUCTION .............................................................................................................................. ..... 4 II. SAFETY .............................................................................................................................. ................. ...

  • Quantum 1103 Series - page 4

    4 www.pridemobility.c om Quantum 1103 Ultra I. INTRODUCTION SAFETY WELCOME to Quantum Rehab, a divi sion of Pride Mobility Products (Pride). Th e power chair you have purchased combines state-of-the-art components with safety , comfort, and styling in mind. We are confident that these design features will provide you with the conveniences you expec ...

  • Quantum 1103 Series - page 5

    Quantum 1103 Ultra www. pridemobility.com 5 Read and follow the information in the owner’s manu al. Do not allow unsupervised children to play near the power chair while the b atteries are charging. Maximum seating weight. Keep your hands away from the tires when driving. Be aware that loose fitting clothing can become caught in drive tires. Use ...

  • Quantum 1103 Series - page 6

    6 www.pridemobility.c om Quantum 1103 Ultra Do not connect an extension cord to the A C/DC co nverter or the battery charger. Removal of grounding prong can create elec trical hazard. If necessary, properly install an approved 3-pronged adapter to an el ectrical outlet having 2-pronged plug access. Wear safety goggles. Corrosive chemicals contained ...

  • Quantum 1103 Series - page 7

    Quantum 1103 Ultra www. pridemobility.com 7 EMI/RFI — This product has been tested and passed at an immunity level of 20 V/m. Explosive conditions exist! Use only AGM or Gel-Cell batteries to reduce the risk of leakage or explosive conditions. Keep tools and other metal objects away from battery terminals. Contact with tools can cause electrical ...

  • Quantum 1103 Series - page 8

    8 www.pridemobility.c om Quantum 1103 Ultra Battery charger for indoor use only. Disposal and recycling — Contact your Q uantum Rehab Provider for information on proper disposal and recycling of your Pride product and its packaging. Locked and in drive mode. Place unit on level ground and stand to on e side when changing from drive mode to freewh ...

  • Quantum 1103 Series - page 9

    Quantum 1103 Ultra www. pridemobility.com 9 II. SAFETY GENERAL GUIDELINES MANDATORY! Do not operate your new power chair for the first time wi thout completely reading and understanding this owner’s manual. Your power chair is a stat e-of-the-art life-enhancemen t device designed to increase mobility. Pride provides an extensive variety of produc ...

  • Quantum 1103 Series - page 10

    10 www.pridemobility.c om Quantum 1103 Ultra II. SAFETY Weight Limitations Your power chair is rated fo r a maximum weight capacity. Please refer to the spe cifications table for this limit. Keep in mind that the maximum weight capacity includes the combined wei ght of the user and any accessories mounted to the power chair. WARNING! Stay within th ...

  • Quantum 1103 Series - page 11

    Quantum 1103 Ultra www. pridemobility.com 11 Freewheel Mode Your power chair is equipp ed with two manual freewheel levers to allow for manual maneuverability by a trained attendant. For more information about how to place your power chair into and out of freewheel mode, see III. “Your Power Chair.” WARNING! Do not use your power chai r in free ...

  • Quantum 1103 Series - page 12

    12 www.pridemobility.c om Quantum 1103 Ultra WARNING! When cornering sharply, reduce your s peed and maintain a stable center of gravity. This greatly reduces the possi bility of a tip or fall. Public Streets and Roadways WARNING! You should not operate your power chair on public streets and ro adways. Be aware that it may be difficult for traf fic ...

  • Quantum 1103 Series - page 13

    Quantum 1103 Ultra www. pridemobility.com 13 WARNING! Do not attempt to have your power chair proceed backward down any step, curb, or other obstacle. This may cause the power chair to tip. Stairs and Escalators Power chairs are not designed to travel up or down stairs or escalators. Always us e an elevator. WARNING! Never use your power chair to n ...

  • Quantum 1103 Series - page 14

    14 www.pridemobility.c om Quantum 1103 Ultra WARNING! Do not sit on you r power chair while it is in a moving vehicle. WARNING! Always be sure your power chair and its batteries are properly secured when it is being transported. Batteries should be secured in an up right position and protective caps should be installed on the battery terminals. Bat ...

  • Quantum 1103 Series - page 15

    Quantum 1103 Ultra www. pridemobility.com 15 Reaching and Bending Never reach, lean, or bend while driving your power chair. If it is absolute ly necessary to reach, lean, or bend while seated on your power chai r, it is important to maintain a stable center of gravity and keep the power chair from tipping. Pride recommends that the power chair use ...

  • Quantum 1103 Series - page 16

    16 www.pridemobility.c om Quantum 1103 Ultra Users must exercise care and common sense when opera ting a power chair. This includes awareness of safety issues when taking prescribed or over-the-counter drugs or when the us er has specific phys ical limitations. WARNING! Consult your physician if you are t aking prescribed or over-the-counter medi c ...

  • Quantum 1103 Series - page 17

    Quantum 1103 Ultra www. pridemobility.com 17 FRICTION LOCK LEVER III. YOUR POWER CHAIR THE QUANTUM 1103 ULTRA POWER CHAIR The Quantum 1103 Ultra has two main asse mblies: the seat a nd the power base. See figures 5 and 6. Typically, the seat assembly includes the armres ts, seatback, and seat base. The power base assembly includes two motor/ brake ...

  • Quantum 1103 Series - page 18

    18 www.pridemobility.c om Quantum 1103 Ultra III. YOUR POWER CHAIR Figure 6. The Quantum 110 3 Ultra Power Base Electrical Components The electrical components are located on the power base. The main circui t breaker is located on the front of the battery tray. The controller connector and the motor conn ectors are located on the power module, insi ...

  • Quantum 1103 Series - page 19

    Quantum 1103 Ultra www. pridemobility.com 19 III. YOUR POWER CHAIR Motor Connectors: This is where the controller connects to th e motors. The motor conne ctors are color-coded with red and yellow labels. The label color on the moto r connector corresponds with the label color on the power module. Battery Connector: This is where the controll er co ...

  • Quantum 1103 Series - page 20

    20 www.pridemobility.c om Quantum 1103 Ultra Manual Freewheel Levers Your power chair has a manua l freewheel lever on each motor. Manual fr eewheel levers enable you to disengage the drive motors from the gearboxe s and maneuver the chair manually. WARNING! Do not use the power cha ir while the drive motors are disengaged! Do not disengage the dri ...

  • Quantum 1103 Series - page 21

    Quantum 1103 Ultra www. pridemobility.com 21 IV. ASSEMBLY INITIAL ASSEMBLY Your power chair may require some assembly either before initial use or after trans portation. It may also require disassembly to make some comfort adjustments. Figure 10 details those parts of the power chair that are designed to be disassembled and asse mbled by an end use ...

  • Quantum 1103 Series - page 22

    22 www.pridemobility.c om Quantum 1103 Ultra IV. ASSEMBLY Seat Installation It may be necessary to install the seat eithe r prior to initial oper- ation or after transporting your power chair. Most seats are attached to the power base wi th the Universal Mounting System (UMS). The UMS consists of universal parts that may be attached to any medium-b ...

  • Quantum 1103 Series - page 23

    Quantum 1103 Ultra www. pridemobility.com 23 IV. ASSEMBLY Figure 13. Contour Seat Controlle r Harness Routing F igure 14. Synerg y Seat Contr oller Harnes s Routing WIRE TIES ...

  • Quantum 1103 Series - page 24

    24 www.pridemobility.c om Quantum 1103 Ultra V. COMFORT ADJUSTMENTS COMFORT ADJUSTMENTS After becoming familiar with your power chair’s operation, you may fi nd the need to make some adjustments to increase your comfort, such as seat height and angle, armrest angle, foot plat form height and angle, and controller position. NOTE: If your power cha ...

  • Quantum 1103 Series - page 25

    Quantum 1103 Ultra www. pridemobility.com 25 Figure 17. Seat Po sition Adjustment V. COMFORT ADJUSTMENTS NOTE: Change the seat dump by raising or lowering only one set of towers (front or back). 10. Reinstall the retaining clips from step 8. 11. Remove each screw fr om the trapeze bars and apply thread lock. 12. Reinstall each screw into the trapez ...

  • Quantum 1103 Series - page 26

    26 www.pridemobility.c om Quantum 1103 Ultra V. COMFORT ADJUSTMENTS Seatback Angle Adjustment If your power chair is e quipped with an adjustable seatback, you can adjust it to four (4) different angles: 90°, 102°, 105°, or 107°. To adjust the seatback angle: 1. Remove the seatback a ngle adjusting screws from each seat hinge. See figure 18. 2. ...

  • Quantum 1103 Series - page 27

    Quantum 1103 Ultra www. pridemobility.com 27 Controller Position You can move the controller in toward or out away from the armrest, or change the position of the control- ler for either left-hand or right-hand use. WARNING! Do not place the co ntroller harness so that it can be pinched in the seat frame or the power base frame. To extend the contr ...

  • Quantum 1103 Series - page 28

    28 www.pridemobility.c om Quantum 1103 Ultra V. COMFORT ADJUSTMENTS Foot Platform He ight Adjustment The foot platform height is easily adjusted to several different heights. To raise or lower the foot platform: 1. Remove the quick release fasteners from the foot platform bracket. See figure 20. 2. Raise or lower the foot platform to the desired he ...

  • Quantum 1103 Series - page 29

    Quantum 1103 Ultra www. pridemobility.com 29 Foot Platform Angle Adjustment You can adjust the angle of the foot platform with a hex key. See figure 22. To adjust the foot platform angle: 1. Flip up the foot platform and locate the setscrew. 2. Turn the setscrew to rais e or lower the front of the foot platform. Anti-Tip Wheels The anti-tip wheels ...

  • Quantum 1103 Series - page 30

    30 www.pridemobility.c om Quantum 1103 Ultra WARNING! The power elevating seat option is intended for use on a level surface only. Never raise the seat from its lowest position on an inclined surface. Failure to heed this warning can result in the power chair tipping over. WARNING! Never raise the seat from its lowest position when ope rating your ...

  • Quantum 1103 Series - page 31

    Quantum 1103 Ultra www. pridemobility.com 31 V. COMFORT ADJUSTMENTS Positioning Belt Your power chair may be equipped with a positioning belt that can be adjust ed for operator comfort. See fig- ure 25. The positioning belt is designed to support the operator so that he/she doe s not slide down or forward in the seat. The positioning belt is not de ...

  • Quantum 1103 Series - page 32

    32 www.pridemobility.c om Quantum 1103 Ultra BATTERIES AND CHARGING Your power chair uses two long-lasting, 12-volt, deep-cyc le batteries. These batteries are sealed and maintenance free. Since they are sealed, there is no need to check the electrolyte (fluid) level. Deep -cycle batterie s are designed to handle a longer and deeper discharge. Thou ...

  • Quantum 1103 Series - page 33

    Quantum 1103 Ultra www. pridemobility.com 33 VI. BATTERIES AND CHARGING Battery Break-in To break in new batteries for maximum efficiency: 1. Fully recharge any new battery prior to its initial us e. This brings the battery up to about 90% of its peak performance level. 2. Operate your power chair th roughout the house and yard. Move slowly at firs ...

  • Quantum 1103 Series - page 34

    34 www.pridemobility.c om Quantum 1103 Ultra  Daily Use If you use your power chair on a daily basis, charge the batteries as soon as you are finished using your power chair. Your power chair will be ready each morning to gi ve you a full day’s service. It is recommended that you charge the batteries 8 to 14 hours after daily use.  Infreque ...

  • Quantum 1103 Series - page 35

    Quantum 1103 Ultra www. pridemobility.com 35 How can I ensure maximum battery life? A fully charged deep-cycle battery will provide reliab le performance and extended battery life. Keep your power chair’s batteries fully charged whenever possible. Batteries that are regula rly and deeply discharged, infrequently charged, or stored without a full ...

  • Quantum 1103 Series - page 36

    36 www.pridemobility.c om Quantum 1103 Ultra CARE AND MAINTENANCE Your Quantum 1103 Ultra is a sophisticated power chair. Li ke any motorized vehicle, it requires routine mainte- nance checks. You can perform some of these checks, but others require assistance from your Quantum Rehab Provider. Preventive maintenance is ve ry important. If you follo ...

  • Quantum 1103 Series - page 37

    Quantum 1103 Ultra www. pridemobility.com 37  All wheel bearings are prelubricated and seal ed. They require no subsequent lubrication.  The body shroud has been sprayed with a clear sealant coating. You can apply a light coat of car wax to help it retain its high-gloss appearance.  Check all electrical connecti ons. Make sure they are tig ...

  • Quantum 1103 Series - page 38

    38 www.pridemobility.c om Quantum 1103 Ultra Storage Your power chair should be st ored in a dry place, free from temperature extremes. When storing, disconnect the batteries from the power chair. See VI. “Batteries and Charging”. WARNING! If you fail to store the unit properly , the frame can rust and the electronics can be damaged. Batteries ...

  • Quantum 1103 Series - page 39

    Quantum 1103 Ultra www. pridemobility.com 39 35ps i 35 p s i M A X M A X 2 .4 2 .4 ba r ba r TIRE Follow these easy steps for a quick and safe repair for both pneumatic and solid tires: 1. Turn off the power to the controller. 2. Set the power chair up on blocks. 3. If you are changing a pneumatic tire, completely deflate it before removing the whe ...

  • Quantum 1103 Series - page 40

    40 www.pridemobility.c om Quantum 1103 Ultra To replace the batteries: 1. Turn off the power to the controller. 2. Make sure that the power chair is in drive mode. See III. “Your Power Chair”. 3. Loosen the rear shroud fasteners. See figure 6. 4. Remove the rear shroud. 5. Unplug the battery connector. See figure 29. 6. Disconnect the wiring ha ...

  • Quantum 1103 Series - page 41

    Quantum 1103 Ultra www. pridemobility.com 41 18. Connect the wiring harnesses to the front battery. See figure 29. 19. Connect the wiring harnesses to the rear battery. See figure 29. WARNING! Make sure you tighten the fasten ers so that the connections are secure. 20. Slide the battery tray ba ck into the power base. NOTE: Make sure that the power ...

  • Quantum 1103 Series - page 42

    42 www.pridemobility.c om Quantum 1103 Ultra VIII. WARRANTY LIFETIME LIMITED WARRANTY For the lifetime of your power chair from the date of purch ase, Pride will repair or replace at our option to the original purchaser, free of charge, any of the following parts found upon examination by an authorized represen- tative of Pride to be defective in m ...

  • Quantum 1103 Series - page 43

    Quantum 1103 Ultra www. pridemobility.com 43 VIII. WARRANTY RECONDITIONED UNITS WARRANTY All reconditioned units are covered by a six-month warranty from Pride e ffective from the date of purchase. WARRANTY EXCLUSIONS This warranty does not extend to t hose items which may require replacem ent due to normal wear and tear.  ABS Plastic shrouds ? ...

  • Quantum 1103 Series - page 44

    44 www.pridemobility.c om Quantum 1103 Ultra APPENDIX I – SPECIFICATIONS 1 Varies with base model, user weight, terrain type, battery am p hour rati ng (Ah), battery charg e, battery condition, motor s, controller type, tire type, and tire co ndition. This specification can be subject to variance of +10%, -5%. 2 Due to manufacturing toler ances a ...

  • Quantum 1103 Series - page 45

    Quantum 1103 Ultra www. pridemobility.com 45 APPENDIX I – SPECIFICATIONS Figure 30. Quantum 1103 Ultra Dimensio ns and Ground Clearance 20.75” (52.71 cm ) TURNING RADIUS GROUND CLEARANCE 2.50” (6.35 cm) WIDTH LENGTH 39” (99 cm) with foot platform 35.5” (90.17 cm) 23” (58.42 cm) ...

  • Quantum 1103 Series - page 46

    46 www.pridemobility.c om Quantum 1103 Ultra NOTES ...

  • Quantum 1103 Series - page 47

    *infmanu3675* QUANTUM SERIES Including Model: Quantum 1 103 Ultra 2SP Pride keeps a mor e detailed r e port on file at the factory . Date Inspected Inspector Quality Control – Quantum 1 103 Ultra Series Inclusion of all Par ts Joystick Seri al Number Controller Seria l Number Left Motor Seria l Number Right Motor Serial Number Fit and Finish Per ...

Manufacturer Quantum Category Mobility Aid

Documents that we receive from a manufacturer of a Quantum 1103 Series can be divided into several groups. They are, among others:
- Quantum technical drawings
- 1103 Series manuals
- Quantum product data sheets
- information booklets
- or energy labels Quantum 1103 Series
All of them are important, but the most important information from the point of view of use of the device are in the user manual Quantum 1103 Series.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Quantum 1103 Series, service manual, brief instructions and user manuals Quantum 1103 Series. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Quantum 1103 Series.

Similar manuals

A complete manual for the device Quantum 1103 Series, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Quantum 1103 Series by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Quantum 1103 Series.

A complete Quantum manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Quantum 1103 Series - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Quantum 1103 Series, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Quantum 1103 Series, that we can find in the current document
3. Tips how to use the basic functions of the device Quantum 1103 Series - which should help us in our first steps of using Quantum 1103 Series
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Quantum 1103 Series
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Quantum 1103 Series in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Quantum 1103 Series?

Use the form below

If you did not solve your problem by using a manual Quantum 1103 Series, ask a question using the form below. If a user had a similar problem with Quantum 1103 Series it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)