Manual ZyXEL Communications ES-2048

88 pages 3.18 mb
Download

Go to site of 88

Summary
  • ZyXEL Communications ES-2048 - page 1

    ZyXEL ES-2000 Series (ES-2024A / ES-2024PWR / ES-2048) Ethernet Switch Support Notes V ersion 3.60 September 2006 ...

  • ZyXEL Communications ES-2048 - page 2

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 2 INDEX How to manage & maintain your Switch? Firmware Upgrade Restore a Configuration File Backing Up a Configuration File Load Factory Default s Physical Switch connection Connecting two switches via Fiber Channel General Networking DHCP ...

  • ZyXEL Communications ES-2048 - page 3

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 3 How to restart device from W eb? How to check the current running firmware version? Is the mini GBIC tr ansceiver hot-swapp able? What are the differences between ES-2024 and ES-2 024A? How much PoE Pow er can ES-2024PWR supply concurrently? ...

  • ZyXEL Communications ES-2048 - page 4

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 4 4. Browse the firmware located or type in the p ath into the “File Path” field. 5. Click on the Upgrade button. From Console Port: 1. Download (and unzipped) the correc t model firmware to your computer . 2. Connect to the console port a ...

  • ZyXEL Communications ES-2048 - page 5

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 5 ...

  • ZyXEL Communications ES-2048 - page 6

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 6 Restore a Configuration File From Web GUI: 1. Click Management and then Maintenance in the navigator panel to bring up the following screen. 2. Click on the “Click Here” link of the Re store Configuration to bring up the following screen ...

  • ZyXEL Communications ES-2048 - page 7

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 7 2. Restarting the Switch to enter the debug mode via the terminal. 3. Enter “A TLC” 4. Use X-modem protocol to tr ansfer (Send File) the firmware. 5. Enter “A TGO” to restart the Switch af ter done uploading the configuration file. F ...

  • ZyXEL Communications ES-2048 - page 8

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 8 Backing Up a Configuration File From Web GUI: 1. Click Management and then Maintenance in the navigator panel to bring up the following screen. 2. Click on the “Click Here” link of the Backup Configuration to bring up the following scree ...

  • ZyXEL Communications ES-2048 - page 9

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 9 4. Use X-modem protocol to trans fer (Receive File) the firmware. 5. Enter “A TGO” to restart the Switch af ter done uploading the configuration file. From Command Line FTP: 1. Download (and unzipped) the correc t model firmware to your ...

  • ZyXEL Communications ES-2048 - page 10

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 10 Load Factory Default s From Web GUI: 1. Click Management and then Maintenance in the navigator panel to bring up the following screen. 2. Click on the “Click Here” button of the Load Factory Defaults to bring up the following screen. 3. ...

  • ZyXEL Communications ES-2048 - page 11

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 11 Physical Switch connection How to connect two switches via Fiber Channel Y our Switc h may come with one or m any mini-GB ports. ZyXEL offers Small Form-factor Pluggable (SFP) transceiver s for Gigabit Ethernet and Fiber Channel application ...

  • ZyXEL Communications ES-2048 - page 12

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 12 z Z y X E L S w i t c h w i t h M i n i - G B p o r t x 2 (note: ES-2024A / ES-2024PWR / ES-2048 comes with 2 Mini-GB Port) z SFP-SX Transceiver x2 z LC/LC Fiber Cable (62.5/125MM) x 1 Here is the photo of the SFP-SX Tran sceiver & the ...

  • ZyXEL Communications ES-2048 - page 13

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 13 Photo of the ES-2108-LC Switch 2. Find both Mini-GB Port on ES-2108-LC and GS-4024. 3. Get one transceiver and plug it in to the Mini-GB Port of ES-2108-LC ...

  • ZyXEL Communications ES-2048 - page 14

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 14 4. Plug another transceiver into th e Mini-GB Port of GS-4024 Switch ...

  • ZyXEL Communications ES-2048 - page 15

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 15 5. Remove both side of the protecti on cap from the LC/LC Fiber Cable. 6. Plug the LC/LC Fiber Cable into the transceivers on both ES-2108-LC and GS-4024 Switch. If you connected the cable correctly, the LED of the “L INK” will light up ...

  • ZyXEL Communications ES-2048 - page 16

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 16 7. Now, connect the first PC “Al pha” to ES-2108-LC and the second PC “Delta” to the GS-4024 via t he regular Ethernet cable. 8. Set the NICs in both comput ers to the same IP Domain. (ex, PC “Alpha” :192.168.1.4/24; PC “Delta ...

  • ZyXEL Communications ES-2048 - page 17

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 17 General Networking DHCP Relay Option 82 Application This feature is only available on ES-2048 ISP may want to limit the number of IP address or deliver some specific IP addresses according to certain Switch port, VLAN ID and option 82 strin ...

  • ZyXEL Communications ES-2048 - page 18

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 18 How to set up DHCP Relay Option 82 Environment Here, we will set up an environment to a llow a PC to get DHCP IP address in specific IP pool according to its Switch port, VLAN ID and the option 82 string. In this case, we are using GS-3012 ...

  • ZyXEL Communications ES-2048 - page 19

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 19 server ”. Input the DHCP IP addre ss or domain name and click “ok”. Our IP is 192.168.1.99. ...

  • ZyXEL Communications ES-2048 - page 20

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 20 Input user name and passwor d. The default user name is “administrator” and password is “incognito”. ...

  • ZyXEL Communications ES-2048 - page 21

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 21 It will bring up the following screen, please make sure that your DHCP is in “ online ” status. Then click “ wiza rd ” in the top tool bars and select “ ru le wiza rd ”. ...

  • ZyXEL Communications ES-2048 - page 22

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 22 Give a name and description to the new rule. ...

  • ZyXEL Communications ES-2048 - page 23

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 23 Assign a range of IP addresses or just one IP address to this rule. In our case, we set the IP pool from 192.168.1.201 to 192.168.1.203. After input IP pool, we select “DHCP Option” in Keywords combobox. ...

  • ZyXEL Communications ES-2048 - page 24

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 24 After select the “DHCP Option”, it will pop up “Add DHCP Option Rule” dialog. Select “option 82 Relay Agent Information” , sub-option 1, binary data. For port 25, VLAN 1, “GS-3012”, please key in “0019000147532d33303 132? ...

  • ZyXEL Communications ES-2048 - page 25

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 25 After you finish above step, y ou will see the following figure. ...

  • ZyXEL Communications ES-2048 - page 26

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 26 Then pop up the following screen and you can just press Next button. Then you can add DHCP template (option) such as gateway , DNS server and so on. ...

  • ZyXEL Communications ES-2048 - page 27

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 27 Here we use “192.168.1.1” as gateway IP address of DHCP client PC. ...

  • ZyXEL Communications ES-2048 - page 28

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 28 Y ou can apply DDNS service to DHCP server or not. The rule creation has been finished. ...

  • ZyXEL Communications ES-2048 - page 29

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 29 After finishing all above procedures , your PC will get the IP address 192.168.1.201 when you send a DHCP request. ...

  • ZyXEL Communications ES-2048 - page 30

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 30 Sep arating a physical network into many virtual networks What is V irtual LAN? • VLAN Overview A VLAN (Virtual Local Area Network) allows a physical network to be partitioned into multiple logical networ ks. S tations on a logical networ ...

  • ZyXEL Communications ES-2048 - page 31

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 31 Port-based VLANs are VLANs where the packet forwarding decision is based on the destination MAC address and its associated port. Y ou must define outgoing port s allowed for each port when using port-based VLANs. Note that VLAN only governs ...

  • ZyXEL Communications ES-2048 - page 32

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 32 Port-based VLAN definition : • Egress port for port 1: port 2, port 4, port 5 • Egress port for port 2: port 1, port 3 • Egress port for port 3: port 2 • Egress port for port 4: port 1, port 5 • Egress port for port 5: port 1, por ...

  • ZyXEL Communications ES-2048 - page 33

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 33 For Switch-2, port 1, port 2, and port 3 are allowed to communicate back and forth with uplink port 4, but not with other ports. • Switch-2 VLAN 1 member port: port 1 and port 4 • Switch-2 VLAN 2 member port: port 2 and port 4 • Switc ...

  • ZyXEL Communications ES-2048 - page 34

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 34 For Switch-1, port 1, port2, and port 3 are allowed to communicate back and forth with uplink port 4, but not with other ports. • Switch-1 VLAN 1 member port: port 1 and port 4 • Switch-1 VLAN 2 member port: port 2 and port 4 • Switch ...

  • ZyXEL Communications ES-2048 - page 35

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 35 Scenario In this scenario, Port Based VLAN is used to separate one physical Switch into two smaller logical Switches. Port 1~4 and 9, 10 are in one group. And Port 5~10 are in another group. Po rt-based VLANs are specific only to the switch ...

  • ZyXEL Communications ES-2048 - page 36

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 36 Configuring your Switch to fulfill this scenario (GUI) 1. Connect port 1 with a PC or Notebook via the RJ45 Cable. 2. By default the MGMT IP on every port is 192.168.1.1/24 3. Set your NIC to 192.168.1.2/24 4. Open an Internet browser such ...

  • ZyXEL Communications ES-2048 - page 37

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 37 8. Now, you need to tell the Switch how you are going to separate the physical Switch into some logical small Switches. Thus, we click “Advanced Application” then “VLAN”. On the ri ght screen, check the boxes to suit your need. In t ...

  • ZyXEL Communications ES-2048 - page 38

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 38 9. Finally, you can now verify your re sult. If everything works fine, PC A can ping PC B and PC Z. But it cannot ping PC C or PC D. On the same time, this should work vice versa. 10. For example, PC A: 192.168.1.4/24 PC B: 192.168.1.5/24 P ...

  • ZyXEL Communications ES-2048 - page 39

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 39 12. PING PC Z from PC A (Should work) 13. PING PC C from PC A (Should NOT work) ...

  • ZyXEL Communications ES-2048 - page 40

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 40 Configuring your Switch to fulfill this scenario (CLI) 1. Connect the Switch Console por t with your PC or Notebook. 2. Open your Terminal program.(Ex, Hyper Terminal in Windows System) 3. Make sure that your port settings are bps:9600 Data ...

  • ZyXEL Communications ES-2048 - page 41

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 41 scenario. 7. When all of the above are done, do not forget to give the “write memory” command under the enable mode to save your configuration. What is IEEE 802.1Q T ag-based VLAN? • T ag-based VLAN Overview Regarding IEEE 802.1Q stan ...

  • ZyXEL Communications ES-2048 - page 42

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 42 process the frame across the network. A tagged frame is four bytes longer than an untagged frame and cont ains two bytes of TPID (T ag Protocol Identifier , residing within the type/length field of the Ethernet frame) and two bytes of TCI ( ...

  • ZyXEL Communications ES-2048 - page 43

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 43 • How 802.1Q VLAN works According to the VID information in the t ag, the switch forward and filter the frames among ports. These ports with same VID can communicate with each other . IEEE 802.1Q VLAN function contai ns the following thre ...

  • ZyXEL Communications ES-2048 - page 44

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 44 untagged frame is received, Ingress Process insert a t ag cont ained the PVID into the untagged frame. Each physical port has a default VI D called PVID (Port VID). PVID is assigned to untagged frames or priority t agged frames (frames with ...

  • ZyXEL Communications ES-2048 - page 45

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 45 • Forbidden registration: This port is forbidden to be the egress port of specified VID.. • Fixed registration: While ad control is fixed registration, it means this is a static registration entry . This port is the egress port of the s ...

  • ZyXEL Communications ES-2048 - page 46

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 46 Filtering Database. If the value is t agged, the outgoing frame on the egress port is tagged. If the value is unt agged, the t ag will be removed before frame leaves the egress port. How to connect two switches using VLAN? I want to make VL ...

  • ZyXEL Communications ES-2048 - page 47

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 47 -------------------------- ----------- 2. Configuration of VLAN on switch B Answer: -------------------------- ----------- In switch A, add port 25 in each VLAN VID:101 (port 1,2,3,"25 T AG") VID:102 (port 4,5,6,,"25 T AG&quo ...

  • ZyXEL Communications ES-2048 - page 48

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 48 VID:102 (port 6,7,8,9,10,"25 T AG") VID:103 (port 1 1,12,13,14,"25 T AG") VID:104 (port 15,16,17,18,"25 T AG") VID:105 (port 19,20, 21,23,22"25 T AG) Clients in same VLAN on both switches can communicate e ...

  • ZyXEL Communications ES-2048 - page 49

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 49 IP Multicasting How to setup IGMP snooping in your switch? Figure 1: IGMP and IGMP snooping IGMP snooping is designed for application wit h deployment of multicast traffic. It operates on the underlying IGMP mec hanism where a layer two swi ...

  • ZyXEL Communications ES-2048 - page 50

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 50 ...

  • ZyXEL Communications ES-2048 - page 51

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 51 Configuration of IGMP snooping by web In this example, we enable the IGMP f unction on the GS-4024 (an IGMP router) to connect to a multimedia server . Al so, we enable IGMP snooping function on the ES-3124 or other ZyXEL L2 Switch to conne ...

  • ZyXEL Communications ES-2048 - page 52

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 52 S tep two : In the L2 Switch, click Basic Setting and then Swi tch Set up where we can enable IGMP snooping function with WEB-GUI. Figure 4: IGMP Snooping Setup Configuration of IGMP and IGMP snooping by CLI S tep one: Enable IGMP function ...

  • ZyXEL Communications ES-2048 - page 53

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 53 In the configure mode of CLI, L2Switch(config)# igmp-snooping S tep three: Display the IGMP S tatus In the exec mode of CLI GS-4024# show router igmp S tep Four: Display the IGMP snooping S tatus In the exec mode of CLI L2Switch# show igmp- ...

  • ZyXEL Communications ES-2048 - page 54

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 54 T o ring a network by building reducdent links and connections between Switch What is S p anning T ree Protocol • Sp anning T ree Overview Spanning-Tree Protocol (STP) is a Layer 2 protocol designed to run on bridges and switches. The spe ...

  • ZyXEL Communications ES-2048 - page 55

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 55 2. Filtering Database Instability: When multiple copies of a frame arrive at different ports of a switch, the MAC entry instability in Filtering Database will occur. 1. Host sends an unicast frame to Router (source MAC address is Host' ...

  • ZyXEL Communications ES-2048 - page 56

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 56 How STP Works Spanning Tree provide a loop-free net work. When a switch supported STP recognize a loop in the network topol ogy, it blocks one or more redundant ports. Spanning Tree Protocol continually explore the network, so when the netw ...

  • ZyXEL Communications ES-2048 - page 57

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 57 2. The bridge ID includes two parts , bridge priority (2 bytes) and bridge MAC address (6 bytes). The 802.1d default bridge priority is 32768. For example, a switch with default priority 32768 (8000 hex), MAC address is 00:A0:C5:12: 34:56, ...

  • ZyXEL Communications ES-2048 - page 58

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 58 For each LAN segment (collision domai n), there is a designated port. The designated port has the lowest cost to the root bridge. De signated ports are normally in the forwarding state to forw ard and receive traffic to the segment. If more ...

  • ZyXEL Communications ES-2048 - page 59

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 59 1. Switch A bridge ID = 8000:00A0:C511:1111, Switch B bridge ID = 8000:00A0:C522:2222, Switch C bridge ID = 0001:00A0:C533:3333. Switch C has the lowest bridge ID, so Switch C is the root bridge. A ll ports of the root bridge are designated ...

  • ZyXEL Communications ES-2048 - page 60

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 60 Switching security MAC freeze As an added protection against network intrusion attacks, ZyXEL has implemented the MAC Freeze feature on all ZyXEL Management Switches with firmware version 3.6 or above. Security has been the focus of our Eth ...

  • ZyXEL Communications ES-2048 - page 61

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 61 Y ou can display the St atic MAC Address screen in the web configurator to view the copied MAC addresses. Figure 2: Displaying MAC A ddresses From MAC Freeze After you enabled MAC freeze on port 6 using the CLI command, the switch automatic ...

  • ZyXEL Communications ES-2048 - page 62

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 62 ...

  • ZyXEL Communications ES-2048 - page 63

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 63 Centralized Management Introduction of SNMPc and NetAtlas With the number of network device increase, the demand to detect and respond to the network failure or external event in a very short time posts a great challenge to network administ ...

  • ZyXEL Communications ES-2048 - page 64

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 64 Overview of SNMPc The following diagram shows the main elements of SNMPc. SNMPc includes the following function ♦ Main Button Bar : Button and controls to execute commands quickly ♦ Edit Button Bar : Button to quickly insert map element ...

  • ZyXEL Communications ES-2048 - page 65

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 65 Overview of EMS The following diagram illustrates the main elements in EMS. EMS contains the four main functions. ♦ Menu Shortcut Bar : The buttons execute common commands ♦ Device Panel : This is a graphical device display . ♦ Device ...

  • ZyXEL Communications ES-2048 - page 66

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 66 Configuration of adding a new device via SNMPc In the following example, we will illustr ate how to get started with SNMPc and Netatlas with adding a new device. Follow the procedures from S tep 1 to S tep 11 . Ste p 1 : In the edit button ...

  • ZyXEL Communications ES-2048 - page 67

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 67 Step 2: In the map object prop erties, give the label name and enter the IP address of the selected device. In this example, we configure 172.23.3.1 1 as its IP address of your Switch as shown in Figure 5 Figure 5 Map Object Properties Step ...

  • ZyXEL Communications ES-2048 - page 68

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 68 Read Access Mode to SNMP V2c. Figure 6 Read Access mode Step 5: In the map object properti es, select Access tab to set the pa rameters of Read /Write Access Mode to SNMP V2 c shown in Figure 7. Change the value of Read/write Access Mode to ...

  • ZyXEL Communications ES-2048 - page 69

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 69 Step 6: In the map object properti es, select Access tab to set the pa rameters of Read community to public as shown in Figure 8. Figure 8 Read Community ...

  • ZyXEL Communications ES-2048 - page 70

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 70 Step 7: In the map object propeies, select Access t ab to set the parameters of Read community to public in Figure 9. Change the value of Read//write Community to Public. Figure 9 Read/write Community Step 8: In the Selection tool menu, Cli ...

  • ZyXEL Communications ES-2048 - page 71

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 71 Step 9: Af ter the selection, a pop-up m enu will display the NetAtlas switch manager diagram. Click the Switch Manager to enter the EMS Mapping shown in Figure 1 1 Figure 1 1 Device Selection Step 10: In the EMS mapping, it display a l ogi ...

  • ZyXEL Communications ES-2048 - page 72

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 72 Figure 12. Figure 12 Rootmap Ste p 1 1: Click the your Switch to confi gure the device shown in Figure 13. Figure 13 Device mapping ...

  • ZyXEL Communications ES-2048 - page 73

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 73 VLAN Configuration via EMS In this section, we will give an example to illustrate how to use EMS to create a VLAN2 in GS-4024. Here are the procedures. S tep 1: In the device panel list shown in Figure 12, right-click Configuration , Switch ...

  • ZyXEL Communications ES-2048 - page 74

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 74 Figure 14 Selecting a VLAN T ype After the VLAN type selection, a pop- up window indicate s that you have finished the configuration. Then af ter we have defined the VLAN type to be the 802.1Q, go back to click the Configur ation and then V ...

  • ZyXEL Communications ES-2048 - page 75

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 75 Figure 15. Figure 15 VLAN Configuration Click the New button to create a new VLAN ID in Figure 16. Figure 16 Creating a new VLAN ID Selecting Egress ports and defines them to be tagged or unt agged in Figure 17 Figure 17 Selecting the port ...

  • ZyXEL Communications ES-2048 - page 76

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 76 For more information, reference the user guide of NetAtlas. ...

  • ZyXEL Communications ES-2048 - page 77

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 77 Cluster Management Overview Cluster Management allows you to manage up to 24 switches through a single IP to manage up to 24 switches simultaneously in the same broadcast domain and the same VLAN group ID. The cluster manager which can mana ...

  • ZyXEL Communications ES-2048 - page 78

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 78 A clustering member listens on UDP port 263. When a clustering member receives a request with the matching signature, it ans wers with a HDAP Discover Response. In the response, the clustering member provides identity information about itse ...

  • ZyXEL Communications ES-2048 - page 79

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 79 slave switch. • How to set up Cluster Management in switch S tep 1: Go to menu: “Management” Æ ”Cluster Management” Æ ”Clustering Management Configuration” In “Clustering Management Configuration” pages, check the “Act ...

  • ZyXEL Communications ES-2048 - page 80

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 80 Select a device in the Clustering Candidate table and enter the p assword which is the admin password for the candidate device to add the clustering member . S tep 3: ...

  • ZyXEL Communications ES-2048 - page 81

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 81 Click on the index number to manage the selected clustering member . S tep 4: In “ Member Menu ” p ages, you can change any setting of the clustering member , except Cluster Management, Firmware Upgrade and Restore Configuration. S tep ...

  • ZyXEL Communications ES-2048 - page 82

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 82 Enter “ Management ”->” Cluster Management ”->” Clustering Management Stat us :” In “ Clustering Management St atus ” p ages, you can check the status for each member . S tep 6: Enter “ Management ”->” Cluster ...

  • ZyXEL Communications ES-2048 - page 83

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 83 checking the remove checkbox and then, click on the Remove button to remove a cluster member . FA Q What is the default setting of the IP parameters? IP address: 192.168.1.1 Subnet: 255.255.255.0 What is the default logi n Name and Password ...

  • ZyXEL Communications ES-2048 - page 84

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 84 Password: 1234 How to change the password? Web Configurator is the only place y ou can change the p assword. After you log in for the first time, it is recommended you change the default administrator password. From Web Configurator: Click ...

  • ZyXEL Communications ES-2048 - page 85

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 85 emulation software. 2. Power off and then power on the Swit ch, and press any key to enter the debug mode when the screen shows “Pre ss any key to enter Debug Mode within 3 seconds.” 3. T ype “atlc” and press the enter key 4. When t ...

  • ZyXEL Communications ES-2048 - page 86

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 86 Is Online Help available on the Web Configurator? Y es, the Web Configurator ’s Online Help is available. Clicking on the Help link will bring up a description of t he online help of that screen. How to restart device from W eb? 1. Click ...

  • ZyXEL Communications ES-2048 - page 87

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 87 operating. What are the differences between ES-2024 and ES-2 024A? ES-2024A ES-2024 Remark Bridging 8K MAC addresses 10K MAC addresses 8K MAC uplifts system capabiltity and boosts performance VLAN 4K 2K Full range VLAN support PVID 4K 1~255 ...

  • ZyXEL Communications ES-2048 - page 88

    ES-2000 Series Switch Support Notes All contents c opyright (c ) 2006 ZyXEL C ommunicat ions Corporati on. 88 CLI Cisco-like ZyXEL Style Reduce the learning curve and hands on immediately Configuration File Text mode Binary mode Text editing eases the network management, especially for large scale switch setup. Multiple management IP up to 64 1 Ena ...

Manufacturer ZyXEL Communications Category MP3 Docking Station

Documents that we receive from a manufacturer of a ZyXEL Communications ES-2048 can be divided into several groups. They are, among others:
- ZyXEL Communications technical drawings
- ES-2048 manuals
- ZyXEL Communications product data sheets
- information booklets
- or energy labels ZyXEL Communications ES-2048
All of them are important, but the most important information from the point of view of use of the device are in the user manual ZyXEL Communications ES-2048.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals ZyXEL Communications ES-2048, service manual, brief instructions and user manuals ZyXEL Communications ES-2048. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product ZyXEL Communications ES-2048.

A complete manual for the device ZyXEL Communications ES-2048, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use ZyXEL Communications ES-2048 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of ZyXEL Communications ES-2048.

A complete ZyXEL Communications manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual ZyXEL Communications ES-2048 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the ZyXEL Communications ES-2048, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the ZyXEL Communications ES-2048, that we can find in the current document
3. Tips how to use the basic functions of the device ZyXEL Communications ES-2048 - which should help us in our first steps of using ZyXEL Communications ES-2048
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with ZyXEL Communications ES-2048
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of ZyXEL Communications ES-2048 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning ZyXEL Communications ES-2048?

Use the form below

If you did not solve your problem by using a manual ZyXEL Communications ES-2048, ask a question using the form below. If a user had a similar problem with ZyXEL Communications ES-2048 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)