Deutsch dropdown-ico

Bedienungsanleitung RedMax G3800AVS

36 Seiten 0.78 mb
Download

Zur Seite of 36

Summary
  • RedMax G3800AVS - page 1

    OWNER / OPERA T OR MANUAL CHAINSA WS T2108-93110 (606) The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. W ARNING Before using our products, please read this manual carefully to understand the proper use of your unit. W ARNING APPLICABLE SERIAL NUMBERS ...

  • RedMax G3800AVS - page 2

    ...

  • RedMax G3800AVS - page 3

    SAFETY FIRST Instructions contained in warnings within this manual marked with a symbol concern critical points which must be taken into consideration to prevent possible serious bodily injury, and for this reason you are requested to read all such instructions carefully and follow them without fail. ■ WARNINGS IN THE MANUAL This mark indicates i ...

  • RedMax G3800AVS - page 4

    2. Specifications ■ G3800AVS Power unit : Dis placement ··················································································· 2.34(37.2) cu-in(cm 3 ) Fuel ················································ ...

  • RedMax G3800AVS - page 5

    3. Symbols on the machine  5  Made in Japan RedMax IMPORT ANT ENGINE INFORMA TION THIS ENGINE CONFORMS T O US EP A PH1 FOR SMALL OFF-RO AD ENGINES. ENGINE F AMIL Y : 5KZXS. 0374BC:EM ENGINE DISPLACEMENT : 37cc REFER T O OWNER'S MANUMAL FOR MAINTE- NANCE SPECIFICA TIONS AND ADJUSTMENTS. MANUF ACTURED : INFORMA TION IMPORT ANTE CONCERNANT ...

  • RedMax G3800AVS - page 6

     6  4. For safe operation 1. Never operate a chain saw when you are fatigued, ill, or upset, or under the influence of medication that may make you drowsy, or if you are under the influence of alcohol or drugs. 2. Use safety footwear, snug fitting clothing and eye, hearing and head protection devices. 3. Always use caution when handling fuel. ...

  • RedMax G3800AVS - page 7

     7  4. For safe operation 16. Operate the chain saw only in well ventilated areas. Never start or run the engine inside a closed room or building. Exhaust fumes contain dangerous carbon monoxide. 17. Do not operate a chain saw in a tree unless specially trained to do so. 18. Guard against kickback. Kickback is the upward motion of the guide b ...

  • RedMax G3800AVS - page 8

    A standard saw unit package contains the items as illustrated. (F1) (1) Power unit (2) Guide bar (3) Saw chain (4) Plug wrench (5) Screwdriver for carburetor adjustment Open the box and install the guide bar and the saw chain on the power unit as follows: The saw chain has very sharp edges. Use thick protective gloves for safety. 1. Pull the guard ...

  • RedMax G3800AVS - page 9

    5. Installing guide bar and saw chain  9  7. Tighten the tensioner screw. (2) Loosen (3) Tighten (4) Tensioner screw A new chain will expand its length in the beginning of use. Check and readjust the tension frequently as a loose chain can easily derail or cause rapid wear of itseif and the guide bar. NOTE ...

  • RedMax G3800AVS - page 10

    6. Fuel and Chain oil  10  ■ RECOMMENDED MIXING RATIO GASOLINE 50:OIL 1 (when using ZENOAH genuine oil) • Exhaust emission are controlled by the fundamental engine parameters and components(eq., carburation, ignition timing and port timing) without addition of any major hardware or the introduction of an inert material during combustion. ...

  • RedMax G3800AVS - page 11

    6. Fuel and Chain oil  11  ■ CHAIN OIL Use motor oil SAE 10W-30 all year round, or SAE 30-40 in summer and SAE 20 in winter. Do not use waste or regenerated oil that can cause damage to the oil pump. NOTE again for at least one minute. As some oils may be difficult to agitate depending on oil ingredients, sufficient agitation is necessary f ...

  • RedMax G3800AVS - page 12

     12  It is very dangerous to run a chainsaw that mounts broken parts or lacks any parts. Before starting engine, make sure that all the parts including bar and chain are installed properly. ■ STARTING ENGINE 1. Fill fuel and chain oil tanks respectively, and tighten the caps securely. (F7) 2. Put the switch to "I" position. (F8) ( ...

  • RedMax G3800AVS - page 13

    Keep clear of the saw chain as it will start rotatIng upon starting of engine. ■ CHECKING OIL SUPPLY Make sure to set up the bar and the chain when checking the oil supply. If not, the rotating parts may be exposed. It is very dangerous. After starting the engine, run the chain at medium speed and see if chain oil is scattered off as shown in the ...

  • RedMax G3800AVS - page 14

     14  ■ CHAIN BRAKE This machine is equipped with an automatic brake to stop saw chain rotation upon occurrence of kickback while in saw cutting operation. The brake is automatically operated by inertial force which acts on the weight fitted inside the front guard. This brake can also be operated manually with the front guard turned down to ...

  • RedMax G3800AVS - page 15

    7. Operation ■ STOPPING ENGINE 1. Release the throttle lever to allow the engine idling for a few minutes 2. Put the switch to the "O" (STOP) position. (F17) (1) Switch Carburetor anti-freeze mechanism Operating the chain saws in temperatures of 0–5°C at times of high humidity may result in ice forming within the carburetor, and this ...

  • RedMax G3800AVS - page 16

     16  7. Operation ■ HOW TO SWITCH BETWEEN OPERATING MODES (F19) 1. Flip the engine switch to turn off the engine. 2. Remove the cover to the air filter, remove the air filter, and then remove the choke knob from the cylinder cover. 3. Loosen the screws holding the cylinder cover in place (i.e., the three screws on the inside and the one scr ...

  • RedMax G3800AVS - page 17

    • Before proceeding to your job, read "For Safe Operation" section It is recommended to first practice sawing easy logs. This also helps you get accustomed to your unit. •A lways follow the safety regulations. The chain saw must only be used for cutting wood. It is forbidden to cut other types of material. Vibrations and kickback vary ...

  • RedMax G3800AVS - page 18

     18  ■ FELLING A TREE (F22) 1. Decide the felling direction considering the wind, lean of the tree, location of heavy branches, ease of job after felling and other factors. 2. While clearing the area around the tree, arrange a good foothold and retreat path. 3. Make a notch cut one-third of the way into the tree on the felling side. 4. Make ...

  • RedMax G3800AVS - page 19

    A Log lying on the ground (F23) Saw down halfway, then roll the log over and cut from the opposite side. A Log hanging off the ground (F24) In area A, saw up from the bottom one-third and finish by sawing down from the top. In area B, saw down from the top one-third and finish by sawing up from the bottom. Cutting Limb of Fallen Tree (F25) First ch ...

  • RedMax G3800AVS - page 20

     20  9. Maintenance Maintenance, replacement, or repair of the emission control device and systems may be performed by any non-road engine repair establishment or individual. Before cleaning, inspecting or repairing your unit, make sure that engine has stopped and is cool. Disconnect the spark plug to prevent accidental starting. ■ MAINTENA ...

  • RedMax G3800AVS - page 21

    9. Maintenance 4. Others Check for fuel leakage and loose fastenings and damage to major parts, especially handle joints and guide bar mounting. If any defects are found, make sure to have them repaired before operating again. ■ PERIODICAL SERVICE POINTS 1. Cylinder fins Dust clogging between the cylinder fins will cause overheating of the engine ...

  • RedMax G3800AVS - page 22

     22  4. Spark plug (F34) Clean the electrodes with a wire brush and reset the gap to 0.65 mm as necessary. Champion RCJ-7Y 5. Sprocket (F35) Check for cracks and for excesslve wear interfenng with the chain drive. If the wearing is found obviously, replace it with new one. Never fit a new chain on a worn sprocket, or a worn chain on a new spr ...

  • RedMax G3800AVS - page 23

    ■ SAW CHAIN I t is very important for smooth and safe operation to keep the cutters always sharp. Your cutters need to be sharpened when: • Sawdust becomes powder-like. • You need extra force to saw in. • The cut way does not go straight. • Vibration increases. • Fuel consumption increases. Cutter setting standards: Be sure to wear safe ...

  • RedMax G3800AVS - page 24

     24  10. Maintenance of Saw Chain and Guide Bar Make sure every cutter has the same length and edge angles as illustrated. (F38) (4) Cutter length (5) Filing angle (6) Side plate angle (7) Top plate cutting angle ■ GUIDE BAR • Reverse the bar occasionally to prevent partial wear. • The bar rail should always be a square. Check for wear ...

  • RedMax G3800AVS - page 25

    11 . T roubleshooting Guide Case 1. Starting failure: Make sure the icing prevention system is not working. Case 2. Lack of power/Poor acceleration/Rough idling Case 3. Oil does not come out Check fuel for water or substandard mixture. Check for engine flooding. Check the spark. Check fuel for water or substandard mixture. Check air filter and fuel ...

  • RedMax G3800AVS - page 26

     26  1. Empty the fuel tank and run the engine out of fuel. 2. Empty the oil tank. 3. Clean the entire unit. 4. Store the unit in a dry place out of the reach of children. 12. Storage ...

  • RedMax G3800AVS - page 27

     27  13. Parts list NOTE : 1. Use KOMATSU ZENOAH genuine parts as specified in the parts list for repair and/or replacement. 2. KOMATSU ZENOAH does not warrant the machines, which have been damaged by the use of any parts other than those specified by the company. 3. When placing parts orders for repair and/or replacement, check if the model ...

  • RedMax G3800AVS - page 28

     28  G3800A VS 13. Parts list Fig.1 POWER UNIT (S/N 001881 and up) ...

  • RedMax G3800AVS - page 29

     29  G3800A VS Fig.1 POWER UNIT (S/N 001881 and up) Key# PART NUMBER DESCRIPTION Q'TY /UNIT NOTE 51 848-C40-5121 Clutch ass’y 1 52 2870-51230 • Spring 1 53 2850-51211 Plate 1 56 848-C40-6701 Oil pump ass’y 1 57 848-C40-67A1 • Oil pump 1 58 2850-55121 • Worm 1 59 T2100-55610 Cover, pump 1 60 2670-55410 Screw M4x14 4 61 2850-5521 ...

  • RedMax G3800AVS - page 30

    G3800A VS 13. Parts list Fig.2 POWER UNIT (S/N 001881 and up)  30  ...

  • RedMax G3800AVS - page 31

    G3800A VS Fig.2 POWER UNIT (S/N 001881 and up) Key# PART NUMBER DESCRIPTION Q'TY /UNIT NOTE 50 2872-54230 • Spring 1 51 2851-54260 • Stopper plate 1 52 2851-54270 • Spring 1 53 3330-75411 • Washer ø5.2xø23x1.2 1 54 3310-53331 • Nut (B) R:M8x0.8 1 55 2850-54626 • Spring cover (Black) 1 56 2670-54630 • Screw TP4x12 2 57 2851-5430 ...

  • RedMax G3800AVS - page 32

    Fig.3 CARBBURETOR COMPONENTS (S/N 001881 and up) Key# PART NUMBER DESCRIPTION Q'TY /UNIT NOTE 17 –––––––––– • • SCREEN – 18 –––––––––– • • VALVE, inlet – 19 –––––––––– • • SPRING – 20 –––––––––– • • PIN – 21 –––––––––– ? ...

  • RedMax G3800AVS - page 33

     33  G3800A VS Fig.4 ACCESSORIES (S/N 001881 and up) Key# PART NUMBER DESCRIPTION Q'TY /UNIT NOTE Key# PART NUMBER DESCRIPTION Q'TY /UNIT NOTE 1 3320-91140 Plug 13x19 1 (OP) 2 2670-91150 Driver 1 (OP) 3 Oregon 10014 Bar 16” 1 4 Oregon double- Chain 1 guard 91VG56X 5 Oregon 28734 Protecter 1 (OP) 6 T2100-06010 Gasket kit 1 (OP) 7 2 ...

  • RedMax G3800AVS - page 34

    KOMATSU ZENOAH AMERICA INC. 4344 Shackleford Road Suite 500 Norcross, Georgia 30093 EMISSION-RELATED PARTS, FOR TWO (2) YEARS FROM THE DATE OF ORIGINAL DELIVERY, RedMax / KOMATSU ZENOAH AMERICA, INC., THROUGH ANY RedMax DEALER, WILL REPAIR OR REPLACE, FREE OF CHARGE, FOR THE ORIGINAL AND EACH SUBSEQUENT PURCHASER, ANY PART OR PARTS FOUND TO BE DEFE ...

  • RedMax G3800AVS - page 35

    KOMATSU ZENOAH AMERICA INC. 4344 Shackleford Road Suite 500 Norcross, Georgia 30093 Pièces en rapport avec les émissions de gaz d'échappement : RedMax / KOMATSU ZENOAH AMERICA INC., par l'intermédiaire de n'importe quel revendeur RedMax, réparera gratuitement ou remplacera gratuitement pour l'acheteur initial et chaque ache ...

  • RedMax G3800AVS - page 36

    KOMA TSU ZENOAH AMERICA INC. 4344 Shackleford Road Suite 500 Norcross, Georgia 30093 ...

Produzent RedMax Kategorie Chainsaw

Dokumente, die wir vom Produzenten des Geräts RedMax G3800AVS erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen RedMax
- Bedienungsanleitungen G3800AVS
- Produktkarten RedMax
- Informationsbroschüren
- oder Energieetiketten RedMax G3800AVS
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung RedMax G3800AVS.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen RedMax G3800AVS, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen RedMax G3800AVS. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts RedMax G3800AVS ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts RedMax G3800AVS, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von RedMax G3800AVS hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von RedMax G3800AVS verständlich ist.

Eine gänzliche Bedienungsanleitung von RedMax sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von RedMax G3800AVS bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von RedMax G3800AVS befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich RedMax G3800AVS, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts RedMax G3800AVS - die uns die ersten Schritte während der Nutzung von RedMax G3800AVS erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit RedMax G3800AVS hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von RedMax G3800AVS im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich RedMax G3800AVS?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit RedMax G3800AVS nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit RedMax G3800AVS hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)