Bedienungsanleitung Dell GX270

25 Seiten 0.97 mb
Download

Zur Seite of 25

Summary
  • Dell GX270 - page 1

    Dell™OptiPlex™GX270ServiceManual  Safety Instructions Opening the Computer Cover Chassis Intrusion Switch Control Panel I/O Panel Power Supply System Board Closing the Computer Cover To remove or replace all other GX270 components, see the Dell OptiPlex GX270 Systems User's Guide . Information in this document is subject to ...

  • Dell GX270 - page 2

    Back to Contents Page Chassis Intrusion Switch Dell™OptiPlex™GX270ServiceManual  Removing the Chassis Intrusion Switch  Replacing the Chassis Intrusion Switch  Resetting the Chassis Intrusion Detector   1.  Shut down the computer through the Start menu. 2.  Ensure that your computer and attached devi ...

  • Dell GX270 - page 3

    Small Mini - Tower Computer  Replacing the Chassis Intrusion Switch 1.  Slide the chassis intrusion switch into its slot and reconnect the cable to the connector on the control panel. 2.  Close the computer cover. 3.  Attach the computer stand, if it is used.  4.  Connect your computer and devices to electrical outlets, and turn t ...

  • Dell GX270 - page 4

     3.  Press <Alt><b> to restart the computer and implement your changes. Back to Contents Page  NOTE: The default is Enabled - Silent . NOTE: If a setup password has been assigned by someone else, contact the network administrator for information on resetting the chassis intrusion detector. ...

  • Dell GX270 - page 5

    Back to Contents Page Control Panel Dell™OptiPlex™GX270ServiceManual  Removing the Control Panel  Replacing the Control Panel   1.  Shut down the computer through the Start menu. 2.  Ensure that your computer and attached devices are turned off. If your computer and attached devices did not automatic ...

  • Dell GX270 - page 6

     2.  Remove the metal control - panel shield. 3.  Remove the screw that holds the control panel to the computer, and remove the control panel.  Small Desktop Computer 1.  Remove the front I/O panel (see I/O Panel ).  2.  Using an 8 - inch #2 Phillips screwdriver, remove the screw that secures the control panel to the computer, ...

  • Dell GX270 - page 7

     2.  To prepare the computer cover for removal, release the three computer cover tabs (one tab is located by the CD drive and two tabs are located by the I/O panel).  3.  If necessary, remove the computer cover screw. 4.  Close the computer and remove the computer cover. 5.  Remove the screw that secures the control panel to the c ...

  • Dell GX270 - page 8

    2.  Replace the computer cover. Ensure that the two metal hooks and tabs are securely in position.  To help replace the computer cover, remove the accent door and front mask from the computer cover: a.  Remove the front mask by releasing the tabs on the inside of the computer cover. b.  Remove the accent door by pressing the middle of t ...

  • Dell GX270 - page 9

    Follow the steps in the " Removing the Control Panel " procedure in the reverse order, ensuring that all tabs are secure.  Small Mini - Tower Computer  Follow the steps in the " Removing the Control Panel " procedure in the reverse order, ensuring that all tabs are secure. Back to Contents Page  ...

  • Dell GX270 - page 10

    Back to Contents Page Opening the Computer Cover Dell™OptiPlex™GX270ServiceManual  1.  Shut down the computer through the Start menu. 2.  Ensure that your computer and attached devices are turned off. If your computer and attached devices did not automatically turn off when you shut down your computer, turn them off n ...

  • Dell GX270 - page 11

      Small Mini - Tower Computer 1.  Lay the computer on its side as shown in the illustration. 2.  Open the cover: a.  Facing the back of the computer, press the release button on the right side of the computer with one hand while pulling up on the top of the cover with the other hand. b.  Press the release button on the left side o ...

  • Dell GX270 - page 12

    Back to Contents Page Closing the Computer Cover Dell™OptiPlex™GX270ServiceManual  1.  Ensure that all cables are connected, and fold cables out of the way.  Gently pull the power cables toward you so that they do not get caught underneath the drives. 2.  Ensure that no tools or extra parts are left inside the comp ...

  • Dell GX270 - page 13

    Back to Contents Page I/O Panel Dell™OptiPlex™GX270ServiceManual  Removing the I/O Panel   Replacing the I/O Panel 1.  Shut down the computer through the Start menu. 2.  Ensure that your computer and attached devices are turned off. If your computer and attached devices did not automatically turn off when you ...

  • Dell GX270 - page 14

    Small Desktop Computer   Small Mini - Tower Computer   Replacing the I/O Panel  To replace the I/O panel, follow the removal procedures in the reverse order. Back to Contents Page  2  chassis - intrusion switch cable 5  front audio cable 3  control panel cable 6  I/O cable 1  chassis - intrusion switch cable 4  c ...

  • Dell GX270 - page 15

    Back to Contents Page Power Supply Dell™OptiPlex™GX270ServiceManual  Removing the Power Supply   Replacing the Power Supply  1.  Shut down the computer through the Start menu. 2.  Ensure that your computer and attached devices are turned off. If your computer and attached devices did not automatically turn ...

  • Dell GX270 - page 16

    3.  Slide the power supply toward the front of the computer approximately 1 inch. 4.  Lift the power supply up and out of the computer.  Small Desktop Computer 1.  Disconnect the DC power cables from the system board and the drives.  Note the routing of the DC power cables underneath the tabs in the computer frame as you remove them ...

  • Dell GX270 - page 17

    4.  Slide the power supply toward the front of the computer approximately 1 inch. 5.  Lift the power supply up and out of the computer. Replacing the Power Supply 1.  Slide the power supply into place. 2.  On the small mini - tower computer, replace the two screws that secure the power supply to the back of the computer frame. 3.  Re ...

  • Dell GX270 - page 18

    Back to Contents Page System Board Dell™OptiPlex™GX270ServiceManual  Small Form - Factor System Board                   Small Desktop System Board  1  floppy - drive connector (DSKT) 11  CD drive audio cable connector (C ...

  • Dell GX270 - page 19

     Small Mini - Tower System Board  1  floppy - drive connector (DSKT) 11  CD drive audio cable connector (CD_IN) 2  CD/DVD drive connector (IDE2) 12  front - panel audio cable connector (FRONTAUDIO) 3  battery socket (BATTERY) 13  power connector (12VPOWER) 4  front - panel connector (FRONTPANEL) 14  serial port connect ...

  • Dell GX270 - page 20

      Jumper Settings     Resetting CMOS Settings  1  floppy - drive connector (DSKT) 12  CD drive audio cable connector (CD_IN) 2  CD/DVD drive connector (IDE2) 13  front - panel audio cable connector (FRONTAUDIO) 3  battery socket (BATTERY) 14  power connector (12VPOWER) 4  front - panel connector (FRONTPA ...

  • Dell GX270 - page 21

    1.  Shut down the computer through the Start menu. 2.  Ensure that your computer and attached devices are turned off. If your computer and attached devices did not automatically turn off when you shut down your computer, turn them off now.  3.  Disconnect any telephone or telecommunication lines from the computer. 4.  Disconnect your ...

  • Dell GX270 - page 22

    10.  Remove the system board: a.  If your system board is attached to a metal tray, the board and the tray are connected and are removed as one piece. Pull up on the tab and slide the system board assembly toward the front of the computer, and then lift the board up and away. b.  If your system board is secured to the computer with a screw ...

  • Dell GX270 - page 23

    Back to Contents Page  ...

  • Dell GX270 - page 24

    Back to Contents Page CAUTION: Safety Instructions Dell™OptiPlex™GX270ServiceManual  General  When Working Inside Your Computer  Protecting Against Electrostatic Discharge  Battery Disposal   Use the following safety guidelines to help ensure your own personal safety and to help protect your computer an ...

  • Dell GX270 - page 25

    Back to Contents Page  2.  Turn off your computer and any devices connected to the computer. 3.  Ground yourself by touching an unpainted metal surface on the chassis before touching anything inside your computer.  While you work, periodically touch an unpainted metal surface on the computer chassis to dissipate any static electricity t ...

Produzent Dell Kategorie Personal Computer

Dokumente, die wir vom Produzenten des Geräts Dell GX270 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Dell
- Bedienungsanleitungen GX270
- Produktkarten Dell
- Informationsbroschüren
- oder Energieetiketten Dell GX270
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Dell GX270.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Dell GX270, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Dell GX270. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Dell GX270 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Dell GX270, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Dell GX270 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Dell GX270 verständlich ist.

Eine gänzliche Bedienungsanleitung von Dell sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Dell GX270 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Dell GX270 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Dell GX270, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Dell GX270 - die uns die ersten Schritte während der Nutzung von Dell GX270 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Dell GX270 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Dell GX270 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Dell GX270?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Dell GX270 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Dell GX270 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)