Deutsch dropdown-ico

Bedienungsanleitung Genius IC-M21

32 Seiten 1.29 mb
Download

Zur Seite of 32

Summary
  • Genius IC-M21 - page 1

    INSTRUCTION MANUAL iM21 VHF MARINE TRANSCEIVER ...

  • Genius IC-M21 - page 2

    i IN CASE OF EMERGENCY If your vessel requires assistance, contact other vessels and the Coast Guard by sending a distress call on Channel 16. ❍ USING CHANNEL 16 DISTRESS CALL PROCEDURE 1. “MA YDA Y MA YDA Y MA YDA Y .” 2. “THIS IS ...........................” (name of vessel) 3. Y our call sign or other indication of the ves - sel. 4. ? ...

  • Genius IC-M21 - page 3

    ii FOREWORD Thank you for purchasing this Icom product. The IC-M21 VHF MARINE TRANSCEIVER is designed and built with Icom’ s su- perior technology and craftsmanship. With proper care this product should provide you with years of trouble-free operation. IMPOR T ANT READ ALL INSTRUCTIONS carefully and com- pletely before using the transceiver . SA ...

  • Genius IC-M21 - page 4

    CAUTIONS R W ARNING! NEVER connect the transceiver to an AC outlet. This may pose a fi re hazard or result in an electric shock. R W ARNING! NEVER hold the transceiver so that the antenna is very close to, or touching exposed parts of the body , especially the face or eyes, while transmitting. The transceiver will perform best if the microphone is ...

  • Genius IC-M21 - page 5

    iv IN CASE OF EMERGENCY ................................................ i RECOMMENDA TION ........................................................... i FOREWORD ....................................................................... ii IMPORT ANT ........................................................................ ii EXPLICIT DEFINITIONS ..... ...

  • Genius IC-M21 - page 6

    D Priorities • Read all rules and regulations pertaining to priorities and keep an up-to-date copy handy . Safety and distress calls take priority over all others. • Y ou must monitor Channel 16 when you are not operating on another channel. • False or fraudulent distress calls are prohibited under law . D Privacy • Information overheard bu ...

  • Genius IC-M21 - page 7

    2 2 P ANEL DESCRIPTION q DIAL / CHANNEL GROUP SWITCH [DI A L ] • Selects and changes the regular channels. (p. 6) • Selects one of 2 regular channels in se- quence when pushed for 1 sec. (p. 6) - International and U.S.A. (U.K. version only) channels* are available for regular channels. *Germany version is International and A TIS channels. w CHA ...

  • Genius IC-M21 - page 8

    3 2 P ANEL DESCRIPTION CAUTION!: When attaching or releasing a battery pack, make sure the rubber seal is set in the groove of the battery pack/case correctly . If the seal is not neatly in the groove it may be damaged when attaching the battery pack/case. If the seal is damaged, water resistant is not guaranteed. OPEN LO C K Screw position when re ...

  • Genius IC-M21 - page 9

    4 2 P ANEL DESCRIPTION ■ Function display q TRANSMIT INDICA T OR (p. 8) Appears while transmitting. w BUSY INDICA T OR (p. 8) Appears when receiving a signal or when the squelch opens. e T AG CHANNEL INDICA T OR (p. 12) Appears when a tag channel is selected. r SCAN INDICA T OR (p. 12) Blinks while scanning. t CALL CHANNEL INDICA T OR (p. 6) Appe ...

  • Genius IC-M21 - page 10

    5 2 P ANEL DESCRIPTION o SUB CHANNEL READOUT • Indicates Channel 16 during priority scan. • Indicates Channel 16 during dualwatch or tri-watch. (p. 10) • Indicates the SET mode item while in SET mode !0 BA TTER Y INDICA TOR Indicates remaining battery power . !1 SQUELCH LEVEL INDICA TOR (p. 7) Shows squelch level when set. This indicator can ...

  • Genius IC-M21 - page 11

    6 3 BASIC OPERA TION D International and U.S.A. channels There are 57 International and 57 U.S.A. channels. These channel groups may be speci fi ed for the operating area. q Push [DIAL] to select a regular channel. w Push [ Y ]/[ Z ] switches to select a channel. - “ DUP ” appears for duplex channels. e T o change the channel group, push [DIAL ...

  • Genius IC-M21 - page 12

    7 3 BASIC OPERA TION ■ Lock function This function electronically locks all keys, except [PTT], [SQL • MONI ] and [H/L • LOCK ] to prevent accidental channel changes and function access. • Push [H/L • LOCK ] for 1 sec. to turn the lock function ON and OFF . - Only [PTT], [H/L • LOCK ] and [SQL • MONI ] are functional. Appears while th ...

  • Genius IC-M21 - page 13

    8 3 BASIC OPERA TION q Rotate [OFF/VOL] clockwise to turn power ON. - Use the squelch function to mute any audio noise if necessary . Refer to the previous page for details. w Push* [SQL • MONI ] for 1 sec., and rotate volume to set audio output level. *According to Monitor action selection in SET mode (p. 14). e Push [ Y ]/[ Z ] to select the de ...

  • Genius IC-M21 - page 14

    9 3 BASIC OPERA TION ■ Call channel programming The call channel switch is used to select Channel 9 by de - fault, however , you can program your most often-used chan- nels in each channel group for quick recall. q Push [DIAL] for 1 sec. to select the desired channel group (INT , USA) to be programmed. w Push [16 • C ] for 1 sec. to select the ...

  • Genius IC-M21 - page 15

    10 4 DUAL W A TCH/TRI-W A TCH ■ Description Dualwatch monitors Channel 16 while you are receiving an- other channel; tri-watch monitors Channel 16 and the call channel while receiving another channel. DUAL W A TCH/TRI-W A TCH SIMULA TION • If a signal is received on Channel 16, dualwatch/tri-watch pauses on Channel 16 until the signal disappear ...

  • Genius IC-M21 - page 16

    11 5 SCAN OPERA TION ■ Scan types Scanning is an ef fi cient way to locate signals quickly over a wide frequency range. The transceiver has a priority scan and a normal scan. Set the tag channels (channels to be scanned) before scan- ning. Clear the tag channels which inconveniently stop scan- ning, such as those used for digital communications. ...

  • Genius IC-M21 - page 17

    12 5 SCAN OPERA TION ■ Setting tag channels For more efficient scanning, add desired channels as tag channels or clear tag channels for unwanted channels. Chan- nels set as non-tag channels will be skipped during scanning. T ag channels can be assigned to each channel group (INT , USA) independently . q Select the desired channel group (INT , USA ...

  • Genius IC-M21 - page 18

    13 6 SET MODE ■ SET mode programming SET mode is used to change the conditions of 1 1 transceiver functions: beep tone, scan type, scan resure timer , auto scan, monitor action, automatic backlighting, LCD contrast, auto power save, self check, battery voltage and S/RF meter . q T urn power OFF . w While pushing [SQL • MONI ], turn power ON and ...

  • Genius IC-M21 - page 19

    D Scan resume timer “ St ” The scan resume timer can be selected as a pause (OFF) or timer scan (ON). When OFF is selected, the scan pauses until a received signal disappears. When ON is selected, the scan pauses for 5 sec. after receiving a signal and then re- sumes even if the signal is still being received. D Auto scan function “ AS ” Wh ...

  • Genius IC-M21 - page 20

    D Self check function “ SC ” The self check function checks transceiver conditions by it- self, and informs you in case a problem is found. The follow- ing items are checked after the power is turned ON, then it switches to operation mode. • T emperature (Outside of – 15 ° C to +55 ° C) • Connected battery voltage • W ater intrusion W ...

  • Genius IC-M21 - page 21

    16 6 SET MODE D Battery voltage indicator “ bt ” This function contains display or non-display settings of the voltage of the connected battery pack when the power is ON. • The voltage of the connected battery pack is displayed for 2 sec. after power is turned ON. D S-meter/RF meter indicator “ Sr ” This function contains display or non-d ...

  • Genius IC-M21 - page 22

    17 7 BA TTER Y CHARGING ■ Battery charging Prior to using the transceiver for the fi rst time, the Ni-Cd bat- teries must be fully charged for optimum life and operation. • Recommended temperature range for charging: +10 ° C to +40 ° C (+50 ° F to +104 ° F) • Use the supplied charger (BC-150) only . NEVER use an other manufactures charge ...

  • Genius IC-M21 - page 23

    18 7 BA TTERY CHARGING ■ Installing batteries in the battery case (Not supplied with some versions) When using a battery case attached to the transceiver , install 6 × AA(R6) size alkaline batteries as illustrated below . q Remove the battery case from the transceiver . w Install 6 × AA(R6) size alkaline batteries. • Be sure to observe the co ...

  • Genius IC-M21 - page 24

    19 7 BA TTERY CHARGING D Rapid charging with the BC-121N+AD-103 The optional BC-121N allows up to 6 battery packs to be charged simultaneously . The following are additionally re- quired. • Six AD-103. • An AC adapter (BC-124) or the DC power cable (OPC-656). AC adapter (purchased separately) AD-103 charger adapters are installed in each slot. ...

  • Genius IC-M21 - page 25

    20 8 SUPPLIED ACCESSORIES AND A TT ACHMENTS D Supplied accessories The following accessories are supplied: Qty . q Flexible antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 w Swivel belt clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 e Handstrap . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Genius IC-M21 - page 26

    D Swivel belt clip T o attach: q Slide the stopper into the plastic loop on the back of the transceiver . w Clip the belt clip to a part of your belt. 21 8 SUPPLIED ACCESSORIES AND A TT ACHMENTS e Insert the stopper to the back of the belt clip. Once the transceiver is locked in place, it will swivel 360 de- grees. ...

  • Genius IC-M21 - page 27

    22 8 SUPPLIED ACCESSORIES AND A TT ACHMENTS T o remove: q T urn the transceiver upside down, and then lift to release the transceiver from the belt clip. w Release the belt clip. e Push the top of the stopper towards the transceiver and out at the same time, then push it downwards and free of the plastic loop. R R CAUTION! HOLD THE TRANSCEIVER TIGH ...

  • Genius IC-M21 - page 28

    23 9 TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION . REF . No sound comes from the speaker . • Squelch level is too deep. • V olume level is too low . • Speaker has been exposed to water . p. 7 p. 8 — • Set squelch to the threshold point. • Set [OFF/VOL] to a suitable level. • Drain water from the speaker . No power comes ON. • Th ...

  • Genius IC-M21 - page 29

    24 10 CHANNEL LIST International channels CH Frequency (MHz) CH Frequency (MHz) CH Frequency (MHz) CH Frequency (MHz) CH Frequency (MHz) CH Frequency (MHz) T ransmit Receive T ransmit Receive T ransmit Receive T ransmit Receive T ransmit Receive T ransmit Receive 01 156.050 160.650 1 1 156.550 156.550 21 157.050 161.650 62 156.125 160.725 72 156.62 ...

  • Genius IC-M21 - page 30

    25 11 SPECIFICA TIONS AND OPTIONS ■ Speci fi cations • GENERAL Frequency coverage : T ransmit 156.000 – 161.450 MHz Receive 156.000 – 163.425 MHz Mode : FM (16K0G3E) Channel spacing : 25 kHz Current drain (at 7.5 V DC) : TX High (5 W) 1.5 A typical (1 W) 0.7 A typical Max. audio 200 mA typical Power save 20 mA typical Frequency stability : ...

  • Genius IC-M21 - page 31

    DECLARATION OF CONFORMITY We Icom Inc. Japan 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003 Japan Kind of equipment: VHF MARINE TRANSCEIVER This compliance is based on conformity with the following harmonised standards, specifications or documents: i) EN 301 178-2 V1.1.1 (2000-08) ii) EN 60945 1997 iii) EN 60950 1992 iv) EN 300 698-2 V1.1.1 ( 2000-8) ...

  • Genius IC-M21 - page 32

    Count on us! 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0002 Japan A-61 17H-1EU Printed in Japan © 2001 Icom Inc. GER BEL SWE FRA AUT LUX DEN SUI NED GRE IRL POR ITA GBR ESP FIN < Intended Country of Use > ...

Produzent Genius Kategorie Marine Radio

Dokumente, die wir vom Produzenten des Geräts Genius IC-M21 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Genius
- Bedienungsanleitungen IC-M21
- Produktkarten Genius
- Informationsbroschüren
- oder Energieetiketten Genius IC-M21
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Genius IC-M21.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Genius IC-M21, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Genius IC-M21. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Genius IC-M21 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Genius IC-M21, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Genius IC-M21 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Genius IC-M21 verständlich ist.

Eine gänzliche Bedienungsanleitung von Genius sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Genius IC-M21 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Genius IC-M21 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Genius IC-M21, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Genius IC-M21 - die uns die ersten Schritte während der Nutzung von Genius IC-M21 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Genius IC-M21 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Genius IC-M21 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Genius IC-M21?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Genius IC-M21 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Genius IC-M21 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)