-
Zanussi ZJ 1217 - page 1
INSTRUCTION BOOKLET W ASHING MACHINE ZJ 1217 ZJ . 1217 INTENSIVE NORMAL QUICK 1200 900 700 500 START PAUSE WASH CLOGGED FILTER DOOR PREWASH SPIN END EXTRA RINSE RINSES 95º E 60º 40º 30º 60º 40º 30º 40º 30º 40º O 30º COTTON DELICATES SYNTHETICS WOOL 60º SPECIAL PROGRAMMES 40º E 40º E SOIL LEVEL DRAIN ON / OFF PREWASH BIO SPIN RINSE HOL ...
-
Zanussi ZJ 1217 - page 2
2 Installation ● This appliance is heavy . Care should be taken when moving it. ● It is dangerous to alter the specifications or attempt to modify this product in any way . ● All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in inst ...
-
Zanussi ZJ 1217 - page 3
3 Contents F or the User Important Safety Infor mation 2 Y our New W ashing Machine 4 Description of the Appliance 5 Detergent dispenser drawer 5 The Control Panel 6 Operating sequence 10-1 1 Load the laundry 10 Measure out the detergent 10 Measure out the fabric softener 10 Switch the machine on 10 Select the required programme 10 Select the requi ...
-
Zanussi ZJ 1217 - page 4
4 Y our New W ashing Machine Y our new washing machine fitted with the Zanussi “JET SYSTEM”, meets all moder n requir ements for effective treatment of laundry with low water , ener gy and detergent consumption. Even small loads are washed “economically” because the amount of water used is regulated automatically according to the load and t ...
-
Zanussi ZJ 1217 - page 5
5 Description of the Appliance 1 Deter gent dispenser drawer 2 Programme guide 3 Control panel 4 Door opening handle 5 Filter 6 Adjustable feet Deter gent dispenser dr a w er Prewash Main wash Fabric softener ZJ . 1217 INTENSIVE NORMAL QUICK 1200 900 700 500 START PAUSE WASH CLOGGED FILTER DOOR PREWASH SPIN END EXTRA RINSE RINSES 95º E 60º 40º 3 ...
-
Zanussi ZJ 1217 - page 6
1 Deter gent dispenser dr a w er 2 Mains-on light This light comes on when the ON/OFF button is pressed, and goes out when it is pressed again. 3 ON/OFF button Press this button to switch the machine on. Press it again to switch the machine off. Programme Option buttons Depending on the programme, different functions can be combined. These must be ...
-
Zanussi ZJ 1217 - page 7
7 7 Soil le v el By depressing this button it is possible to select a programme more or less intensive according to the soil level of your laundry . The corresponding pilot light comes on. Intensive For heavy soiled laundry . The washing phase will be prolonged by about 10 minutes. It can be selected for cotton and synthetic items. This option cann ...
-
Zanussi ZJ 1217 - page 8
8 11 Pr ogr amme selector dial The selector is divided into 5 sections: • Cotton, • Synthetics • Delicates • W ool (hand washing) • Special programmes • Reset programme O The selector dial can be turned either clockwise or anticlockwise. Position E corresponds to the ENERGY SA VING programme and position to “cold wash”. At the end o ...
-
Zanussi ZJ 1217 - page 9
W ith this programme it is possible to rinse and spin garments which have been washed by hand. The machine performs 3 rinses, followed by a final spin at 1200 r .p.m. The spin speed can be reduced by depressing SPIN button. Hand washed garments can be softened with this programme. The machine performs 1 rinse, followed by a final spin at the max. s ...
-
Zanussi ZJ 1217 - page 10
10 Operating Sequence Before the first wash, we recommend that you run a cotton cycle at 60°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the dispenser drawer and start the machine. 1. Load the laundr y Open the door by pulling the door handle outwards. Place ...
-
Zanussi ZJ 1217 - page 11
11 7. Select the r equir ed options The light corresponding to the depressed button illuminates. 8. Star t the pr ogr amme T o start the selected programme, press the ST AR T/P AUSE button; the corresponding light stops flashing . The pilot light corresponding to the wash phase which is running is on. The machine starts operating. ST ART P AUSE INT ...
-
Zanussi ZJ 1217 - page 12
W ashing Hints Do NOT overload the machine. W eigh the laundry the first few times you use the appliance. The average weights of the most common items are listed below as a guide: 1000g = 1 kg Sheet 700-1000 g Pillow case 100-200 g T ablecloth 400-500 g Serviette 50-100 g T ea towel 70-120 g Linen hand towel 100-150 g T owelling hand towel 150-250 ...
-
Zanussi ZJ 1217 - page 13
13 And in which f orm? Not only are there different types of deter gent, but they are also available in different forms. Whether you chose a powder or liquid in traditional or compact form is your own personal choice. TRADITIONAL POWDERS Pour the powder directly into the dispenser drawer . Do not sprinkle powder onto clothes in the machine drum. TR ...
-
Zanussi ZJ 1217 - page 14
W ash Car e Symbols W ash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct programme on your washing machine. W ASHING SYMBOL BLEACHING IRONING DR Y CLEANING TUMBLE DR YING W ...
-
Zanussi ZJ 1217 - page 15
15 W ashing Pr ogrammes *The “coloured cotton programme” at 60°C is the reference programme for the data entered in the energy label, in compliance with EC 92/75 standards. This data is given purely as an indication: the consumption values may vary in relation to the quantity and type of laundry , the temperature of the water supply and the am ...
-
Zanussi ZJ 1217 - page 16
16 This data is given purely as an indication: the consumption values may vary in relation to the quantity and type of laundry , the temperature of the water supply and the ambient temperature. SPIN RINSE HOLD EXTRA RINSE SPIN RINSE HOLD SPIN SPIN RINSE HOLD Selector dial position Programme Additional functions 4.5 kg 4.5 kg 4.5 kg - 4.5 kg 2 kg Ma ...
-
Zanussi ZJ 1217 - page 17
17 T o aid cleaning, the top part of the additive compartment should be removed. Cleaning the dr a w er r ecess Having removed the drawer , use a small brush to clean the recess, ensuring that all washing powder residue is removed from the upper and lower part of the recess. Replace the drawer and run the rinse programme without any clothes in the ...
-
Zanussi ZJ 1217 - page 18
18 Cleaning the filter The water drain filter A clean filter is important for the correct functioning of the machine, and should therefore be cleaned after every washing programme. Place a container under the filter to catch any spillage. If the filter is blocked and the machine is unable to drain you will need to drain the water manually from the ...
-
Zanussi ZJ 1217 - page 19
19 Something Not W orking Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer . Before contacting your local Service Force Centre, please carry out the checks listed below . IMPOR T ANT : if you call out an engineer to a fault listed below , or to repair a fault caused by ...
-
Zanussi ZJ 1217 - page 20
20 Symptom The door will not open Possible causes ● The water level is above the bottom edge of the door . ● The machine is heating the water . ● The drum is turning. Spinning starts late or the machine does not spin ● The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum. The laundry ...
-
Zanussi ZJ 1217 - page 21
21 Guarantee Conditions Standar d guar antee conditions W e, Zanussi, undertake that if, within 24 months of the date of the purchase, this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option, repair or replace the same FREE OF ANY CHARGE for labour , materials or ...
-
Zanussi ZJ 1217 - page 22
22 To contact your local Ser vice Force Centre telephone 08705 929 929 132996160_ZJ1217.qxd 21/08/2003 16:58 Pagina 22 (Nero/Process Black pellicola) ...
-
Zanussi ZJ 1217 - page 23
23 To contact your local Ser vice Force Centre telephone 08705 929 929 132996160_ZJ1217.qxd 21/08/2003 16:58 Pagina 23 (Nero/Process Black pellicola) ...
-
Zanussi ZJ 1217 - page 24
24 Installation Instructions T echnical Specifications It is dangerous to alter the specifications or attempt to modify this product in any way . Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or co ...
-
Zanussi ZJ 1217 - page 25
25 Unpacking All transit bolts and packing must be removed before using the appliance. Y ou are advised to keep all the packaging for re-use in case the machine is to be transported again. Using a spanner unscrew and remove the rear right bolt. Lay the machine gently on its back, making sure that the hoses are not squashed. Remove the polystyrene b ...
-
Zanussi ZJ 1217 - page 26
26 P ositioning Install the machine on a flat hard floor . Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Check that the machine does not touch the wall or other kitchen units. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor . Y our new washing ...
-
Zanussi ZJ 1217 - page 27
27 The drain hose may be extended to a maximum of 4 metres. An additional drain hose and joining piece is available from your local Service Force Centre. The joining piece must have an internal diameter of 18mm. If you intend the drain hose to empty into a sink, make sure that the sink is empty and the plug hole is not blocked. Use the plastic “U ...
-
Zanussi ZJ 1217 - page 28
28 Electrical connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. W ARNING: THIS APPLIANCE MUST BE EAR THED. The manufacturer declines any liability should this safety measure not be observed. Before switching on, make sure the electricity supply voltage is the same ...
-
Zanussi ZJ 1217 - page 29
29 Building-in This appliance has been designed to be built into the kitchen furniture. The recess should have the dimensions shown in picture A. Preparation and assembly of the door The machine is originally pre-arranged for the assembly of a door opening from right to left. In this case it is sufficient to screw in the hinges (1) and the counter- ...
-
Zanussi ZJ 1217 - page 30
30 Recommendations r egar ding the construction and fitting of a base when the installa tion r equir es an integr ated appliance to be r aised Where the appliance has been raised by mounting onto a wooden base provided by the installer . The material used to construct the base should have a non slip surface, be water repellent and if possible be on ...
-
Zanussi ZJ 1217 - page 31
From the Electrolux Group. The world’ s No. 1 choice . The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value o ...
Hai una domanda su Zanussi ZJ 1217?
Utilizza il modulo sottostante
Se non hai risolto il problema con Zanussi ZJ 1217 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Zanussi ZJ 1217 è probabile che voglia condividere il modo di risolverlo.