GENERAL OPERATION : • The meter is supplied complete with a 9V bat- tery. Remove the battery compartment cover on the back of the meter and install the battery while paying attention to its po- larity. • Connect the MA914BR/1 probe to the meter. • Turn the instrument on by pressing the ON/OFF key. At start-up, the LCD shows the percentage of ...
Milwaukee SM105 - page 2
ISM105R1 11/03 Release the button and the message “7.01 pH USE” (or “6.86 pH USE” for NIST buffer set) will be displayed. • The meter automatically recognizes the buffer value: if a valid buffer is detected, then its value is displayed on the LCD together with the “REC” message, and the first calibration point is ac- cepted. • The m ...
