-
Honeywell PCR11ELW - page 1
Atomic Projection Clock with Temperature (PCR11ELW) USER MANUAL INTRODUCTION Thank you for selecting the Honeywell Atomic Projection Clock with Temperature. This device includes precise time keeping, alarm, moonphase, temperature monitoring and projection features that you can use from the comfort of your home. In this package you will find: ¥ Ato ...
-
Honeywell PCR11ELW - page 2
Battery cover SNOOZE/ Backlight/ Projection Light key + / — key MODE key Rotate key Flip key Focus key Projector Lens Adjustable projector Adapter socket ALARM 2 ALARM 1 RO TATE FOCUS FLIP DC 3V CONTINUE PROJECTION LIGHT / SNOOZE Continuous Projection key MODE PM DATE MONTH 2 SET 1 SET ATOMIC CLOCK FEATURES *C urrent time image is projected onto ...
-
Honeywell PCR11ELW - page 3
1 2 3 4 DISPLAYING PROJECTED INFORMATION CONTINUOUSLY Connect AC/DC adapter as shown below. Battery cover Battery compartment Please make sure your household voltage matches the voltage supported by the adapter, or it will damage your clock and adapter. Use 2 X AA, 1.5V batteries and AC-DC adapter (AC120V, 60Hz-DC3V, 100mA) included. Important: RO ...
-
Honeywell PCR11ELW - page 4
GETTING STARTED * After batteries are installed, the WWVB time signal receiver will automatically search for the time signal. This will take about 5 – 8 minutes. Always place clock by the window for better reception. * If the radio signal is received, the date and time will be set automatically and the icon [ ] will app ...
-
Honeywell PCR11ELW - page 5
SETTING TIME AND DATE MANUALLY The time piece date and time can be set by pressing and holding the MODE buttons for 3 seconds in Time/Temperature display with the atomic time receiver disabled. To disable atomic time receiver, press and hold [ — ] key until the atomic reception icon will appear from the display. DISPLAYING TEMPERATURE AND ALARMS ...
-
Honeywell PCR11ELW - page 6
ALARM 2 setting -In the ALARM 2 Display, *Press and hold SET 2 for about 3 seconds: the alarm hour digits will flash and alarm hour can be set by pressing UP [+] or DOWN [–] key. *Press SET 2 again: the alarm minute digits will flash and minute can be set by pressing UP [+] or DOWN [–] key. *Press SET 2 for the third time, the ...
-
Honeywell PCR11ELW - page 7
Time Zone setting * Press and hold UP (+) key for 3 seconds, to select the corresponding time zone. * Keep holding the UP (+) button to switch to the time zone in the following sequence: Pacific time Mountain time Central time Eastern time. Press MODE to confirm the selected T ime Zone EL Backlight ON / OFF (PCR11ELW) * Pre ...
-
Honeywell PCR11ELW - page 8
5. Only use fresh batteries as specified in the user’s manual. Do not mix new and old batteries as the old ones may leak. Always replace both batteries at the same time. 6. Always read the user’s manual thoroughly before operating the unit. 7. Replace the batteries promptly when necessary (display becomes dim) or store the batteries ...
-
Honeywell PCR11ELW - page 9
STANDARD WARRANTY INFORMATION This product is warranted from the manufacturing defects for one year from date of retail purchase. It does not cover damages or wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and repair. Note that online product registration is required to ensure valid warranty protection. To r ...
