-
Hitachi 210-208 - page 1
308–043 Rev . F Supersedes Rev . C and PCN D INSTRUCTIONS-P ARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. Displacement Pump 1000 psi (70 bar , 7 MPa) Maximum Working Pressure Model 210–208, Series F GRACO INC. P .O. BOX 1441 MINNEAPOLIS, MN 55440–1441 COPYRIGHT ...
-
Hitachi 210-208 - page 2
T able of Contents W arnings 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setup/Operation 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Service 6 . . . . . . . . . . . . . . . . . . . . . . . . . .? ...
-
Hitachi 210-208 - page 3
INJECTION HAZARD Spray from the gun, leaks or ruptured components can inject fluid into your body and cause extremely serious injury , including the need for amputation. Fluid splashed in the eyes or on the skin can also cause serious injury . D Fluid injected into the skin might look like just a cut ...
-
Hitachi 210-208 - page 4
FIRE AND EXPLOSION HAZARD Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and result in a fire or explosion and serious injury . D Ground the equipment and the object being sprayed. Refer to Grounding on page 5. D If there is any static sparking or you feel ...
-
Hitachi 210-208 - page 5
Setup/Operation General Information NOTE: Reference numbers and letters in parentheses in the text refer to the callouts in the figures and the parts drawing. NOTE: Always use Genuine Graco Parts and Acces - sories, available from your Graco distributor . Grounding W ARNING FIRE AND EXPLOSION HAZARD Before operating the pu ...
-
Hitachi 210-208 - page 6
Service Notes D Repair Kit 223–439 is available to service the pump. For the best results, use all the kit parts. Parts included in the kit are marked with an asterisk in the text, for example (15*). D If possible, have all the necessary replacement parts available before you begin the repair , to reduce down time. D Whe ...
-
Hitachi 210-208 - page 7
Service Fig. 1 4 2 3 1 5 06644 13 14 41 36 Lower Holes 1 1 28 *15 42 18** 38 32 24* 39 2 3 T orque to 50–60 ft-lb (68–81 N S m) T ighten in a criss-cross pattern THROA T PISTON 39 47 *46 *44 41 45* 4 4 Lips of V -packings must face down 36 *15 28 †16 49 43 *31 30 *31 35 25 5 3 T orque to 30–40 ft-lb (41–54 N S m) ...
-
Hitachi 210-208 - page 8
Service Throat Packings (Fig. 1) 1. Remove the intake valve and the cylinder (38) as explained in the previous sections. 2. Remove the packing nut/wet-cup (39). 3. Pull the displacement rod (36) out of the bottom of the outlet housing (41). 4. Remove the throat packings and glands from the outlet housing. 5. Clean all part ...
-
Hitachi 210-208 - page 9
Notes ...
-
Hitachi 210-208 - page 10
Parts 06645 36 15 28 *24 38 32 †18 42 28 15* 24* 25 35 31* 30 31* 43 49 16† 39 †47 *45 *46 44* 13 14 41 32 ...
-
Hitachi 210-208 - page 11
Parts Model 210–208, Series F Displacement Pump Includes items 13–49 Ref Part . y t Q n o i t p i r c s e D . o N . o N 13 100–127 NUT , hex; 5/8–1 1 4 14 100–128 LOCKW ASHER, spring; 5/8” 4 15* 100–579 PIN, cotter; 1” (25.4 mm) long 4 16 † 101–178 BALL; 1.25” (32 mm) dia.; chrome steel 1 18 † 101–718 BALL; 2” (51 mm) di ...
-
Hitachi 210-208 - page 12
The Graco W arranty and Disclaimers W ARRANTY Graco warrants all equipment listed in this manual which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. Graco will, for a period of tw ...
