dropdown-ico

0.97 mb

of 8

Summary
  • Hobart ML-136134 - page 1

    701 S. RIDGE A VENUE TROY , OHIO 45374-0001 937 332-3000 www .hobartcorp.com F-35216 (Dec. 2006) HOBAR T HOBHL2 Heat Lamp ML-136134 INCLUDES REPLACEMENT PA R T S ...

  • Hobart ML-136134 - page 2

    – 2 – © HOBART , 2006 Installation, Operation and Care of the Hobart HOBHL2 Heat Lamp SA VE THESE INSTRUCTIONS GENERAL The HOBHL2 Heat Lamp is used in conjunction with a 2912B Slicer to maintain cooked roast beef to an internal temperature above 140°F for up to 30 minutes while slicing. The Heat Lamp is designed to hold this temperature with ...

  • Hobart ML-136134 - page 3

    – 3 – Fig. 1 Fig. 2 Fig. 3 1. Place skid plate on table where slicer is to be located. 2. Make sure there is suf fi cient room on the table to support the front feet of the slicer (the feet on the index knob end of slicer) before drilling holes for the skid plate. 3. Check beneath the tabletop to be sure there are no hazards before drilling ho ...

  • Hobart ML-136134 - page 4

    – 4 – Fig. 4 OPERA TION W ARNING : THE HEA T LAMP AND ITS P ARTS ARE HOT AND CAN CAUSE BURNS. USE CARE WHEN OPERA TING, CLEANING AND SER VICING. Set-Up 1. Place Optional Portable Platter on the slicer (Fig. 4). 2. The Main Heat Source is fi xed in position over the slicer Carriage T ray (Fig. 4). No adjustment is necessary . 3. Adjust the Fron ...

  • Hobart ML-136134 - page 5

    – 5 – CLEANING W ARNING : UNPLUG POWER CORD AND ALLOW HEA T LAMP T O COOL. CAUTION: Do not raise slicer until cool to prevent damage to plastic components on the slicer . Remove the optional portable platter and move the front heat lamp gooseneck away from the slicer before raising the slicer up on the lift lever . W ash all surfaces with a dam ...

  • Hobart ML-136134 - page 6

    – 6 – 9 8 11 12 10 7 6 5 48 47 46 43 44 1 39 34 33 26 14 13 29 31-32 45 42 40 38 41 30 27 28 17 15-16 19 35 20 22 23 21 24 25 36-37 18 3 2 4 PL-58198 HOBART HEA T LAMP MAINTENANCE SERVICE Contact your local Hobart authorized service of fi ce for any repairs, adjustments or replacement parts. The Infrared Lamps are considered expendable items a ...

  • Hobart ML-136134 - page 7

    – 7 – HOBART HEA T LAMP ILLUS. P ART NO. NAME OF P ART AMT . PL-58198 1 00-914161 Emitter – Full T rough (FTE) (With Spring Clip) .......................................................................... 1 2 00-914137 De fl ector – Emitter .................................................................................................... ...

  • Hobart ML-136134 - page 8

    – 8 – FORM 35216 (Dec. 2006) PRINTED IN U.S.A. NOTES ...

Hobart Indoor Furnishings

:
-
-
-
-
-






1.
2.
3.
4.
5.
6.

Captcha

(0)