-
Weber 39935 - page 1
® ® DANGER Please read the following warnings carefully before using your FirePlace. Failure to follow these warnings may result in serious bodily injury or death, or in a fire causing damage to property . W ARNINGS 䡵 The Weber FirePlace is designed solely for outdoor use. Indoor use can be lethal. 䡵 Use only on noncombustible surfaces, such ...
-
Weber 39935 - page 2
Assembly T ools needed Screwdrivers, regular and Phillips 7/16 inch open-end or an adjustable wrench T wo steel handles T wo top wood handles T wo bottom wood handles T wo wood screws Sixteen large fiber washers Eight small fiber washers T wenty 1/4 inch steel washers T wenty-four 1/4-20 hex nuts T wenty-four 1/4-20 x 5/8 inch machine screws Step 2 ...
-
Weber 39935 - page 3
Step 4 Install Three Legs Y ou will need: three legs, bottom, six machine screws, twelve large fiber washers, nine steel washers, six hex nuts, a regular screwdriver and wrench. Install only three legs as shown in Figure 3. Note that the machine screws are not installed in the same direction. CAUTION: Do not overtighten; you may crack the porcelain ...
-
Weber 39935 - page 4
Step 7 Assemble Lower Support Ring Y ou will need: lower support ring, upright assembly , eight machine screws, eight hex nuts, a screwdriver and wrench. Assemble lower support ring as shown in Figure 6. Figure 6 Upper ring assembly from Step 5 Hex nut Machine screw Lower support ring Step 6 Assemble Upper Support Ring Y ou will need: four uprights ...
