0.28 mb

of 2

Prev Next

Hitachi 75 - page 1

Operating Instructions OPERA TION 1. Check Driver Bit to make sure it is in good con- dition. • If it is broken or worn out, install a new one. 2. IMPORT ANT! Make sure the forward-reverse switch is in the forward position. 3. Insert a strip of screws into the feed track. Pull it through and insert the front into the index mod- ule until the firs ...
Hitachi 75 - page 2

OPERATION CONT. 7. Press the nosepiece with constant force against the work surface. Do not remove the tool from work surface until the clutch disengages and the bit stops rotating, signaling a fully driven screw. 8. Lift the tool enough to relieve all down pres- sure, allowing the feed mechanism to complete a full stoke before starting to drive an ...

Hitachi Power Screwdriver

:
-
-
-
-
-

1.
2.
3.
4.
5.
6.