-
PYLE Audio PDWM-2600 - page 1
PDWM-2600 www.pyleaudio.com ...
-
PYLE Audio PDWM-2600 - page 2
SQUELCH Note that switching the microphone on and off can cause interference that will be heard if the microphone volume level of the amplifier system is still set high. PDWM-2600 Avoid exposure of the system to rain or moisture. No user-serviceable parts inside the system. Refer all servicing to a qua- lified technician only. Handle the microphone ...
-
PYLE Audio PDWM-2600 - page 3
HANDHELD MICROPHONE/DIAGRAM SQUELCH DC 12V MIX AF. OUT BALANCED ANT Unscrew the battery cover at the end of the microphone, Install the provided volt battery, taking care to fit it with the correct polarity connected, Check the battery by switching the microphone ON, The red LED will come on for one second and then go OFF, this indicates correct op ...
-
PYLE Audio PDWM-2600 - page 4
SPECIFICATIONS A. OVERALL SYSTEM 1. Oscillation mode: 2. Carrier Frequency Range: 3. Stability: 4. Max Deviation: 5. Dynamic Range: 6. S/N Ratio: 7. T. H. D: 8. Squelch: 9. Frequency Response: 10. B. REVEL VER 1. Sensitivity: 6dBpv at S/N >70dB 2. Image Rejection: >60dB 3. Stability: >80dB 4. Audio output: -12db/600ohm unbalanced and balan ...
