-
Chamberlain PIR2300R - page 1
Car ton Inventor y Over view The Wireless Pedestrian & V ehicle Sensor is a Passive Infra-Red sensor that detects movement of people and vehicles, while allowing small animals to pass through undetected. Each PIR Motion Sensor has its own unique ID, for a secure radio link. Base Station (not provided) can learn the signals of up to four PIR Mot ...
-
Chamberlain PIR2300R - page 2
2 Step 5 Pr ogramming PIR Motion Sensor to Base Station T est PIR Motion Sensor by waving hand in front of sensor . T est light should flash. Secure cover with the smallest screws. Step 3 Insert battery pack facing away from circuit board and attach cover . NOTE: Ensure the batteries do not touch the circuit board and the antenna and battery wires ...
-
Chamberlain PIR2300R - page 3
T r oubleshooting The PIR Motion Sensor lights up, but the Base Station does not respond. The PIR Motion Sensor must be programmed to Base Station (See Step 5). Ensure Base Station is on and is not muted. If the green power light is not lit or is flashing, press the Mute Button on the top of the Base Station to wake it up. If the green power is ill ...
-
Chamberlain PIR2300R - page 4
© 2008, The Chamberlain Group Inc. 1 14A3508B All Rights Reserved FOR TECHNICAL SUPPORT DIAL OUR TOLL FREE NUMBER: 1-800-528-9131 www .chamberlain-DIY .com NOTICE: T o comply with FCC and or Industry Canada rules (IC), adjustment or modifications of this receiver and/or transmitter are prohibited, except for changing the code setting or replacing ...
