INST ALLING FC-5910 CONNECTORS ON COAX CABLE STEP 1: Strip outer cover back 1/2"* from end of cable. Fray braid back as far as outer cover will allow . STEP 2: Trim braid close to outer cover and remove 1/4"* of inner insulation being careful not to nick center conductor . Make sure no foil or braid can touch center conductor . STEP 3: Sl ...
Winegard RV-7012 - page 2
Figure 3 APPLICA TIONS AND AL TERNA TE CONNECTIONS INSTRUCTIONS STEP 1. Select location for wall plate and patio receptacle. Run two coax cables between locations and install connectors on each end. Mark cable s so "ca ble input" and "TV outpu t" may be identied. Antenna downlead and +12 VDC will also be needed at inside wall ...
