Bedienungsanleitung Zanussi FLA 801 W

30 Seiten 0.44 mb
Download

Zur Seite of 30

Summary
  • Zanussi FLA 801 W - page 1

    W ASHING MACHINE FLA 801 W INSTRUCTION BOOKLET 35.292.630/0 ...

  • Zanussi FLA 801 W - page 2

    2 Installation ■ This appliance is heavy . Care should be taken when moving it. ■ It is dangerous to alter the specifications or attempt to modify this product in any way . ■ All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in inst ...

  • Zanussi FLA 801 W - page 3

    3 Contents F or the User Important Safety Infor mation 2 Y our New W ashing Machine 4 Description of the Appliance 5 The Control Panel 6 Operating sequence 7-10 W ashing 4,5 kg of white cotton at 90 °C 7 Load the laundry 7 Measure out the detergent 7 Measure out the additive 7 Select the required programme 7 Start the machine 8 At the end of the p ...

  • Zanussi FLA 801 W - page 4

    4 Y our New W ashing Machine i Y our new washing machine, meets all moder n needs for ef fective treatment of laundry with low water , energy and detergent consumption. ■ Automatic cooling of the wash water to 60°C before draining, with the 90°C programme. This reduces thermal shock to fabrics, helping to prevent any creasing. ■ The special w ...

  • Zanussi FLA 801 W - page 5

    5 Description of the Appliance 1 Detergent dispenser drawer 2 Programme guide 3 “Mains-on” light 4 “Options” buttons 5 Program selector dial & ON/OFF switch 6 Door opening handle 7 Filter 8 Adjustable feet Deter gent dispenser dr a w er Prewash Main W ash Fabric softener AL035 ...

  • Zanussi FLA 801 W - page 6

    6 The Contr ol Panel 1 Deter gent dispenser dr a w er 2 Pr ogr amme Guide 3 Mains-on light This light illuminates when the appliance is operating. 4 Rinse hold button Press this button to make the machine stop with water in the drum after the synthetic or delicate wash cycles. This prevents any creasing which may take place if the clothes are left ...

  • Zanussi FLA 801 W - page 7

    7 Operating Sequence Before your first wash, we recommend that you run a cotton cycle at 60°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the dispenser drawer and start the machine. W ASHING 4.5 KG OF WHITE COTTON A T 90°C Suppose you have 4.5 kg of heavily s ...

  • Zanussi FLA 801 W - page 8

    8 5. Star t the machine Before starting up the machine check that: ■ the appliance is plugged in ■ the water supply taps are turned on ■ the door and the detergent dispenser drawer are closed. Pull the programme selector dial outwards The operating pilot light will illuminate and the machine will start operating 6. At the end of the pr ogr am ...

  • Zanussi FLA 801 W - page 9

    9 W ASHING 2 KG OF MIXED F ABRICS A T 50 °C Suppose you have 2 kg of MIXED F ABRICS to wash. They are rather delicate fabrics and should not be washed at a high temperature. 1. Load the laundr y Open the door . Place the laundry in the drum, one item at a time, shaking out as much as possible. Close the door . 2. Measur e out the deter gent Pull o ...

  • Zanussi FLA 801 W - page 10

    10 5. Select the r equir ed pr ogr amme T urn the programme selector dial CLOCKWISE to the required programme 6. Star t the machine Before starting up the machine check that: ■ the appliance is plugged in ■ the water supply taps are turned on ■ the door and the detergent dispenser drawer are closed. Pull the programme selector dial outwards T ...

  • Zanussi FLA 801 W - page 11

    11 W ashing Hints i Do NOT overload the machine. W eigh the laundry the first few times you use the appliance. The average weights of the most common items are listed below as a guide: 1000g = 1 kg Sheet 700-1000 g Pillow case 100-200 g T ablecloth 400-500 g Serviette 50-100 g T ea towel 70-120 g Linen hand towel 100-150 g T owelling hand towel 150 ...

  • Zanussi FLA 801 W - page 12

    12 Delicate Items When washing delicates such as woollens, you should use a product which is specially designed to care for fine fabrics. Dreft Automatic is suitable for woollens and other delicates. Laundry Bleach For additional stain removal you may wish to use a product such as Ace Gentle Bleach which is used in addition to your chosen detergent ...

  • Zanussi FLA 801 W - page 13

    13 Bounce conditioning sheets for use in a tumble dryer . W e recommend the conditioning sheets are pinned (using a safety pin) to an article of laundry and placed in the tumble dryer . Ho w much deter gent and fabric softener? The amount to be used depends on: the load: if the detergent manufacturer does not make any specification for small loads, ...

  • Zanussi FLA 801 W - page 14

    14 W ash Care Symbols W ash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct programme on your washing machine. W ASHING SYMBOL BLEACHING IRONING DR Y CLEANING TUMBLE DR YING ...

  • Zanussi FLA 801 W - page 15

    15 W ashing Programmes Pr ogr ammes for cotton and linen Whites+Prewash White cotton, for example heavy soiled work garments, sheets, household linen, underwear , towels. A Prewash at 40 ˚C W ash at 90˚C 4 rinses Long spin at 800 rpm 4.5 kg W ash programme Degree of soil and type of laundry Programme dial position Description Max. load Possible o ...

  • Zanussi FLA 801 W - page 16

    16 W ashing Programmes Pr ogr ammes for synthetics, delica tes and w ool Mixed Fabrics Synthetic or mixed fabrics, underwear , coloured garments, non- shrink shirts, blouses. (Normally soiled) H W ash at 50˚C 3 rinses Short spin at 600 rpm 2 kg W ash programme Degree of soil and type of laundry Programme dial position Description Max. load Possibl ...

  • Zanussi FLA 801 W - page 17

    17 Maintenance and Cleaning Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply Descaling The water we normally use contains lime. It is a good idea to periodically run a high temperature wash with detergent or use a descaler in the machine. Do this separately from any laundry washing, and ...

  • Zanussi FLA 801 W - page 18

    18 Cleaning the filter The water drain filter A clean filter is important for the correct functioning of the machine, and should therefore be cleaned after every washing programme. Open the filter door and place a container underneath to catch any spillage. If the filter is blocked and the machine is unable to drain you will need to drain the water ...

  • Zanussi FLA 801 W - page 19

    19 Something Not W orking Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer . Before contacting your Zanussi Service Force Centre, please carry out the checks listed below . Important :If you call out an engineer to a fault listed below or to repair a fault caused by inc ...

  • Zanussi FLA 801 W - page 20

    20 Mod. .......... Prod. No. ........... Ser . No . ......... Mod. .......... Ser. P0042 Symptom The door will not open Possible causes ■ The programme is still running. ■ The door lock has not yet released ■ The water level in the drum is too high or the machine is heating. Spinning starts late or the machine does not spin ■ The electronic ...

  • Zanussi FLA 801 W - page 21

    21 Guarantee Conditions Zanussi standar d guar antee conditions This guarantee is in addition to your statutory and other legal rights. W e, Zanussi, undertake that if, within 12 months of the date of the purchase, this ZANUSSI appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our ...

  • Zanussi FLA 801 W - page 22

    22 ZANUSSI SER VICE FORCE T o contact your local Zanussi Service Centre telephone 08705 929929 CHANNEL ISLANDS GUERNSEY Guernsey Electricity PO Box 4 Vale, Guernsey Channel Islands JERSEY Jersey Electricity Company PO Box 45 Queens Road St Helier Jersey Channel Islands JE4 8NY SCOTLAND ABERDEEN 54 Claremont Street (M05) Aberdeen AB10 6RA AUCHTERMUC ...

  • Zanussi FLA 801 W - page 23

    23 ZANUSSI SER VICE FORCE T o contact your local Zanussi Service Centre telephone 08705 929929 MIDLANDS BIRMINGHAM 66 Birch Road East (M18) Wyrley Road Ind. Estate Witton Birmingham B6 6DB BOURNE Manning Road Ind. Estate (M44) Pinfold Road Bourne PE10 9HT BRIDGNORTH 68 St. Mary’ s Street (M72) Bridgnorth Shropshire WV16 4DR GLOUCESTER 101 Rycroft ...

  • Zanussi FLA 801 W - page 24

    24 Installation Instructions T echnical Specifications It is dangerous to alter the specifications or attempt to modify this product in any way . Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or co ...

  • Zanussi FLA 801 W - page 25

    25 Unpacking All transit bolts and packing must be removed before using the appliance Y ou are advised to keep all the packaging for re-use in case the appliance has to be transported again. ■ Unscrew and remove the three rear transit bolts (using a spanner). ■ Lay the machine gently on its back, making sure that the hoses are not squashed. W e ...

  • Zanussi FLA 801 W - page 26

    26 P ositioning Y our new Zanussi washing machine has been designed to be permanently plumbed in to your home’ s water supply and drainage system. However , if this is not possible, it may be connected to suitable existing taps, with the drain hose discharging into the sink. The appliance has two inlet hoses, hot and cold, with female 3/4” BSP ...

  • Zanussi FLA 801 W - page 27

    27 W ater dr ainage This appliance is designed to be permanently plumbed into your home's water supply and drainage system. The appliance drain hose should hook (use the plastic “U-piece” supplied) into a standpipe with an internal diameter of approximately 38mm (see diagram) thus ensuring there is an air break between the drain hose and s ...

  • Zanussi FLA 801 W - page 28

    28 Le v elling Level the washing machine by loosening or tightening the feet. Once in the right position fix the feet by pushing the nuts against the base of the case Accurate levelling prevents vibration, noise and displacement of the machine during operation. After levelling the machine, secure the feet by tightening the ring nuts with the aid of ...

  • Zanussi FLA 801 W - page 29

    29 Electrical connections Any electrical work required to install this appliance should be carried out by a qualified electrician.or competent person W ARNING: THIS APPLIANCE MUST BE EAR THED. The manufacturer declines any liability should this safety measure not be observed. Before switching on, make sure the electricity supply voltage is the same ...

  • Zanussi FLA 801 W - page 30

     Electrolux Household Appliances Limited 2000/03 ...

Produzent Zanussi Kategorie Washer

Dokumente, die wir vom Produzenten des Geräts Zanussi FLA 801 W erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Zanussi
- Bedienungsanleitungen FLA 801 W
- Produktkarten Zanussi
- Informationsbroschüren
- oder Energieetiketten Zanussi FLA 801 W
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Zanussi FLA 801 W.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Zanussi FLA 801 W, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Zanussi FLA 801 W. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Zanussi FLA 801 W ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Zanussi FLA 801 W, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Zanussi FLA 801 W hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Zanussi FLA 801 W verständlich ist.

Eine gänzliche Bedienungsanleitung von Zanussi sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Zanussi FLA 801 W bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Zanussi FLA 801 W befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Zanussi FLA 801 W, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Zanussi FLA 801 W - die uns die ersten Schritte während der Nutzung von Zanussi FLA 801 W erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Zanussi FLA 801 W hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Zanussi FLA 801 W im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Zanussi FLA 801 W?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Zanussi FLA 801 W nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Zanussi FLA 801 W hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)