-
Haier HWM-6.5/S - page 1
Fuzzy Computerized Automatic Washing Machine User's manual This manual is for HWM-6.5/S Please read this manual carefully before using. Retain it for future reference. ...
-
Haier HWM-6.5/S - page 2
Names of the parts................................................................................................1 Safety precautions ............................................................................................. 2 Installation and adjustment ...................................................................................4 Prepar ...
-
Haier HWM-6.5/S - page 3
Meaning and description of th e symbols Names of the parts Warning sign Forbidden sign Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents, otherwise it may cause damage of the machine or injure the personal safety of the user . Contents ...
-
Haier HWM-6.5/S - page 4
Safety precautions Do not damage the power cord, bend ,extend, twist, bind or alter it by force. Do not press or nip it with weight. If the power cord or the power plug is bad, or the power plug becomes flexible, to avoid risk it is required to have it replaced by the technicians of our special shop or the after-sale service department. Keep the pi ...
-
Haier HWM-6.5/S - page 5
Safety precautions Do not decompose, repair or alter the machine by yourself. Do not put any hot or heavy items (such as the kettle with hot water ) on the washing machine. Do not wash laundries with volatile materials (such as thinner, petrol etc.) The handicapped or children without care shall not use the machine. Keep the machine away from direc ...
-
Haier HWM-6.5/S - page 6
Installa tion and adjustment The largest allowed slope of the shank base of the machine is 2 . The slanting or rough ground will result in unstable running or stoppage of the machine. Please adjust it with following methods: Adjust the adjustable foot: Install the bottom plate After you open the package, please lean the washing machine gently down ...
-
Haier HWM-6.5/S - page 7
How to change the direction of the drain hose Usage of the drain hose The drainage shall be smooth with the drain hose. 1.put the drain hose up to suitable position. Do not put it on ground 2.Do not step on or press the drain hose. The highest point Notes: the highest point of drain pipe should be higher than the water level of washing tub for avoi ...
-
Haier HWM-6.5/S - page 8
Install t he w a ter i nlet hose 2. Connect the other ends to the water inlet valve . W ater absorption cushion Jointer of the water inlet hose Jointer of the water inlet valve Figure 1 Figure 2 1. Attach the water inlet hoses to the water faucet. Using pliers, tighten the coupling. ( As figure 1) NOTE : Do not over tighten. Damage to the valves ca ...
-
Haier HWM-6.5/S - page 9
Check the connection between the water inlet hose and the wa ter tap 1.Swaying the hose gently to confirm if it is fastened stable. 2.After installation, open the tap to check if it leaks. 3.Do not bend the hose with overstrain. 4.Before each usage please check if the connection between the water inlet hose and the water tap is firm, so as to preve ...
-
Haier HWM-6.5/S - page 10
Pr epar a tion before washing Confirm if there's special requirement for the laundries. Clear the pocket. Take out the coins , sand, hairpins etc. Fasten the buttons and zippers. When the pulsator is running , the buttons of the laundries may cause noise. For the sake of discretion, please put the laundries with buttons into other laundries. T ...
-
Haier HWM-6.5/S - page 11
The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. One time washing quantity shall be lower than the rated capacity. The largest capacity of this machine is 5.0kg. The thickness, size, type of the cloth will influence the actual was ...
-
Haier HWM-6.5/S - page 12
STAN DARD JEANS GENTLE QUICK WASH SOAK WASH RINSE SPIN WA TER SELECTION LEVEL SELECTION PROGRAM SELECTION PROCEDURE U se the operation buttons a. Description of the function of the buttons The user selects a suitable water level depending on the load. If "Quick" wash is selected, water level will indicate "2". After water level ...
-
Haier HWM-6.5/S - page 13
SURPLUS MIN RESERVE HOURS LA TER CALEF ACTION AT I O N RESER V PA U S E ST AR T ON/OFF POWER T o indicate -- during sensing. T o indicate remaining min. During program running. T o indicate remaining reserved time (hrs) during reservation period. T o indicate fault symbols for abnormal conditions (see page 16) SURPLUS (MIN) Page 16 After the power ...
-
Haier HWM-6.5/S - page 14
ST ANDARD JEANS GENTLE QUICK W ASH SOAK WA SH RINSE SPIN SURPLUS MIN RESERVE HOURS LA TER WA T ER SELECTION LEVEL SELECTION PROGRAM SELECTION PROCEDURE CALEF ACTION AT I O N RESERV PA U S E ST ART ON/OFF POWER b. Operating procedure and e xplanations for the buttons After switching on, the "Sta ndard" program will be the default. If o the ...
-
Haier HWM-6.5/S - page 15
Even there's no water in the tub, the spinning will star t after a certain period. Do not use soak process f or woolen laundrie s . Wash the laundries that are prone to lose color separately from other laundries. The pulsator w ill not rotate unless the water is fille d to selecte d water level. Selection method of the pro cedure pro gram s At ...
-
Haier HWM-6.5/S - page 16
After switching on, the washing machine reserved wash program will be automatically set i nactive. If you desire a wash cycle to end at a reserved time, you can press the " RESERVA TION/CALEFACTION ” button to set a reserved wash program. Refer to The butt on of " RESERVA TION/CALEFACTION " on page 1 1. When "Reservation" ...
-
Haier HWM-6.5/S - page 17
Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. 1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose). Please first pull off the power plug from the receptacle before cleaning. 5.Wipe off the wa ...
-
Haier HWM-6.5/S - page 18
(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service departmen t of our company. Do not repair it by yourself. T r ouble ...
-
Haier HWM-6.5/S - page 19
User's manual Name Water inlet hose Bottom plate T apping screws One piece One piece One piece Eigh t pieces One set Quantity Fuzzy computerized automatic washing machine Packing list Lint filter Tw o pieces Specification W ater level/W ater quantity (about) Wa ter inlet pressure 0.03MPa-0.78MPa Rated washing / spinning capacity(kg) 5.0 /5.0 ( ...
Haben Sie eine Frage bezüglich Haier HWM-6.5/S?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Haier HWM-6.5/S nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Haier HWM-6.5/S hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.