-
Yamaha YHT-470 - page 1
IMPORTANT! Please record the serial number of this unit in the space below. Model: Serial No.: The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCK DO NOT OPEN ...
-
Yamaha YHT-470 - page 2
2 SAFETY INSTR UCTIONS 1 Read Instructions – All the safety and operating instructions should be read before the unit is operated. 2 Retain Instructions – The safety and operating instructions should be retained for future reference. 3 Heed Warnings – All warnings on the unit and in the operating instructions should be adhered to. 4 Follow In ...
-
Yamaha YHT-470 - page 3
3 As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personel only. To avoid electrical shock, do not open the unit. Refer servicing to qualified personnel only. DANGER: The use of optical instrument with this product will increase eye hazard. CAUTION Us ...
-
Yamaha YHT-470 - page 4
• Before making any connections, switch OFF the power to the unit and the amplifier or other component. • Connect the “LINE OUT” terminals to the “CD” (or “AUX”) terminals of the amplifier. If the amplifier does not have such terminals, use the “TAPE PB” terminals. For additional details concerning these connections, refer to th ...
-
Yamaha YHT-470 - page 5
FRONT P ANEL 5 IDENTIFICA TION OF COMPONENTS REMO TE CONTROL TRANSMITTER * The control functions on the main unit and on the remote control transmitter are virtually identical, with the exceptions below. NATURAL SOUND COMPACT DISC PLAYER POWER OPEN/CLOSE + 10 123 45 6 7 89 0 TIME PEAK TAPE PROG OUTPUT LEVEL DOWN UP PLAY PAUSE STOP RANDOM SKIP REPEA ...
-
Yamaha YHT-470 - page 6
1 2 3 4 Display information at disc play ➀ Shows the track number to be played. ➁ Shows the time displays. (Refer to “Selecting time displays” on page 8.) ➂ Displays the numbers that correspond to the numbers of tracks (as high as number 20) on the disc. After each track is played, its corresponding number disappears so the number of rema ...
-
Yamaha YHT-470 - page 7
* To resume play, press the PAUSE button again or press the PLAY button. 7 T o stop play temporarily T o stop play completely T o play a desired trac k on the disc DIRECT PLAY Select a desired track using the numeric button. Example: To select track 25 Press ➀ twice, then immediately press ➁ once. * If a track number higher than the highest tra ...
-
Yamaha YHT-470 - page 8
8 Selecting time displays You can select any of the four time displays by pressing the TIME display modeselect button. Note The remaining time ➁ will not be displayed for track number 25 or higher. Changing brightness of the display If desired, you can change brightness of the display in three degrees by pressing the MODE button. Normal illuminat ...
-
Yamaha YHT-470 - page 9
9 RANDOM-SEQUENCE PLA Y You can have the unit play the tracks on a disc in a random sequence selected by the unit’s microcomputer. To perform random-sequence play To cancel random-sequence play Notes • This feature will not function during programming, or during programmed play. • If the POWER is switched off when the random-sequence play mod ...
-
Yamaha YHT-470 - page 10
1 Stop the unit. 2 3 Select the desired track. * Repeat step 3 to set more programs. You can select the same track again. 4 10 PR OGRAM PLA Y You can enjoy listening to your favorite tracks in any desired order using programmed play. As many as 25 tracks can be programmed for a disc. Display information during program play ➀ Shows the program num ...
-
Yamaha YHT-470 - page 11
11 1 Select a track which has index numbers. 2 3 Select the desired index number. Notes • Not all discs have index numbers. The index system is a method for sub-dividing tracks into smaller divisions (such as, for example, the movements within classical symphonies) for easier location of those parts. The liner notes with the disc usually tell if ...
-
Yamaha YHT-470 - page 12
1 Stop the unit. * The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 15.) 2 Enter the tape’s total possible recording time. You can select any of four tape lengths by pressing the TAPE button. 3 Otherwise, you can also enter the tape’s total possible recording time manually. ...
-
Yamaha YHT-470 - page 13
13 1 Follow steps 1 – 3 on page 12. 2 3 Select the track numbers (to be recorded on side A) in the desired order. * Programmed track numbers are illuminated on the display. You can select a track which can be programmed for the remaining time of (the side of) the tape from track numbers flashing on the display, but you cannot select any darkened ...
-
Yamaha YHT-470 - page 14
1 Follow steps 1 – 3 on page 12. 2 * The unit will automatically program tracks for side A and side B separately considering the tape’s total time. 3 Begin recording on the tape deck and press the PLAY button on this unit at the same time. 4 The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording and ...
-
Yamaha YHT-470 - page 15
15 A utomatic searc hing of the peak level on a disc This convenient feature automatically searches the part on a disc where the source level peaks, and next plays the part repeatedly. For recording to tape, this feature is very helpful to adjust the recording level on the tape deck. 1 Stop the unit. 2 Searches the peak level through the disc. Repe ...
-
Yamaha YHT-470 - page 16
Battery installation Battery replacement If you find that the remote control transmitter must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones. Notes • Use only AA, R6, UM-3 batteries for replacement. • Be sure the polarities are correct. (See the illustration inside the battery compartment.) • Rem ...
-
Yamaha YHT-470 - page 17
SYMPTOM The player does not switch ON when the POWER switch is pressed. The disc tray does not close completely. The DISC indicator does not illuminate. Play does not begin. Play is delayed, or begins at the wrong place. No sound. Sound “skips”. Sound “hums”. Noise from a nearby tuner. Noise from inside of the disc tray. The remote control ...
-
Yamaha YHT-470 - page 18
VQ02270-0 Printed in Japan BWWR, BB Y AMAHA ELECTRONICS CORPORA TION, USA 6660 ORANGETHORPE A VE., BUENA P ARK, CALIF . 90620, U.S.A. Y AMAHA CANADA MUSIC L TD. 135 MILNER AVE., SCARBOR OUGH, ONT ARIO M1S 3R1, CANADA Y AMAHA ELECTRONIK EUROP A G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F .R. OF GERMANY Y AMAHA ELECTRONIQUE FRANCE S.A. ...
Haben Sie eine Frage bezüglich Yamaha YHT-470?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Yamaha YHT-470 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Yamaha YHT-470 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.