Bedienungsanleitung Hoover 53425

13 Seiten 0.55 mb
Download

Zur Seite of 13

Summary
  • Hoover 53425 - page 1

    . /I d HOOVER@ Deluxe Uprtght Cleaner Read this manual before operating the cleaner Owner’s Manual ENGLISH + pp.l-14 ESPAflOL + p&g 15-22 FRANGAlS -8 p. 23-29 This cleaner was inspected and packaged carefully before being shipped from the factory. If you should happen to need assistance during assembly or operation call l-900-944-9200 for an ...

  • Hoover 53425 - page 2

    Fill in and retain The model’and serial number are located on the bottom of the cleaner. For your personal records, please enter the COMPLETE model and serial number In the spaces provided and.retain this information. Your cleaner is model and has serial number It is suggested that you attach your sales receipt to this owner’s manual. Vertficat ...

  • Hoover 53425 - page 3

    it is extremely important to read and follow all the instruction steps in order. The assembled cleaner will look like this drawing. If you need assistance with any step of the assembly, call I-800-944-9200 for an automated referral of authorized service outlet locations (U.S. only) or - l-330-499-9499 to speak with a representative in our Consumer ...

  • Hoover 53425 - page 4

    ’ Stats& Assemble Note: The white switch lock above the ON/Off switch, aids in assembly of your cleaner. Assembly can be continued if the switch lock is missing. However, do not remove the switch lock until assembly is completed. Align upper handfe and lower handle as shown. D B- I Place upper (C) and lower (D) handle parts on a fiat surface, ...

  • Hoover 53425 - page 5

    I I I Pull bracket toward bottom of handle slightly to make sure bracket is locked in place. Make sure hole in bracket aligns with hole in handle. With ON/OFF switch to the front, place assembled handle down onto extension on cleaner base. Rock handle side to side while pushing down firmly. Extra pushing effort may be required. Push bolt into hole ...

  • Hoover 53425 - page 6

    . Sqep 5 AHach paper bag Align opening in paper bag with dirt tube (S) inside bag compartment. Push paper bag firmly onto tube. Tuck top and bottom of paper bag into bag compartment. To replace bag door, insert the 2 tabs on bottom of bag door into the 2 slots on bag compartment. Make sure all edges of paper bag are completely inside the bag compar ...

  • Hoover 53425 - page 7

    cleaner description 16 ld Operate cleaner only at voltage specified on data plate on bottom of cleaner. This cleaner is intended for household use. The assembled cleaner will look like the drawing. 1. Handte 2. ONIDFF switch 3. Cord hooks: wrap cord around hooks for storage. The top hook can be rotated right or left for easy cord release. 4. Furn ...

  • Hoover 53425 - page 8

    $sr&et height adjust- For ease in sliding the control, the han- dle should be in the upright position. When it is necessary to raise and lower the front of the- cleaner (A) for various carpet pile heights, slide the carpet height control (3) to the correct setting. The front of the cleaner will not move into the adjusted position until the hand ...

  • Hoover 53425 - page 9

    B. Select proper clean- C. Attach wand and ing tool tools A. Dusting brush may be used for carved furniture, table tops, books, lamps, lighting fixtures, Venetian blinds, baseboards, shutters, and registers. B. Furniture nozzle may be used for upholstered furniture, draperies, tapestries, mattresses, dothing, automobile interiors, and carpeted stai ...

  • Hoover 53425 - page 10

    Changing ,filter ,bag Disconnect cleaner from electrical outlet. Removing-bag door Pull bag door latch forward and remove door from cleaner. Grasp bag collar and pull collar from tube. Note: Do not clean out old bag and reuse. Discard used bag. Mxwing and installing filter Align opening in new filter bag with dirt tube (B) inside bag compartment. P ...

  • Hoover 53425 - page 11

    Belt. replacement, The -belt on your .HOOVER cleaner causes the agitator to rotate- and is important-for the effective operation of the cleaner.- The belt is located under the bottom-plate of the cleaner and should be checked from time to time to be sure it is in good condition. When to replace L To check belt, remove bottom plate as How to replace ...

  • Hoover 53425 - page 12

    b Edge groomer Lubrication - I- replacement When to replace The edge groomers, located on both sides of the front of the cleaner, should be replaced when they no longer extend past the surface of the bottom plate. What to buy When purchasing edge groomers, ask for HOOVER part No. 39511004. Replacing edge groomers Disconnect cleaner from electrical ...

  • Hoover 53425 - page 13

    Clearing blockages Remove large items from surfaces before vacuuming to prevent blockages and to maintain cleaning effectiveness of your cleaner. Refer to the following steps to check for- blockages continuing with each step until the blockage is found. A. lf a blockage occurs during tool use: Turn cleaner OFF and disconnect it from the electrical ...

Produzent Hoover Kategorie Vacuum Cleaner

Dokumente, die wir vom Produzenten des Geräts Hoover 53425 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Hoover
- Bedienungsanleitungen 53425
- Produktkarten Hoover
- Informationsbroschüren
- oder Energieetiketten Hoover 53425
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Hoover 53425.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Hoover 53425, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Hoover 53425. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Hoover 53425 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Hoover 53425, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Hoover 53425 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Hoover 53425 verständlich ist.

Eine gänzliche Bedienungsanleitung von Hoover sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Hoover 53425 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Hoover 53425 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Hoover 53425, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Hoover 53425 - die uns die ersten Schritte während der Nutzung von Hoover 53425 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Hoover 53425 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Hoover 53425 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Hoover 53425?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Hoover 53425 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Hoover 53425 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)