-
Hanns.G HSG1033 - page 1
HSG1033 HW191 ...
-
Hanns.G HSG1033 - page 2
User’s Manual Before operating the monitor, please read this ma nual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interfer ence S tatement This equipment has been tested and found to comp ly with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed ...
-
Hanns.G HSG1033 - page 3
User’s Manual Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is de signed, manufactured and tested according to some of the stri ctes t quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also mi ...
-
Hanns.G HSG1033 - page 4
User’s Manual RECYCLING INFORMATION We, the Hanns.G care very much about our environment prot ection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life. These devices contain recyclable materials, whic h can be re -decomposed and re-integrat ...
-
Hanns.G HSG1033 - page 5
User’s Manual T ABLE OF CONTENTS SAFETY NOTICE ...................................................................................................... 6 PRECAUTIONS ..................................................................................................... 6 SPECIAL NOTES ON LCD MONITORS .................................................. ...
-
Hanns.G HSG1033 - page 6
User’s Manual SAFETY NOTICE 1. The changes or modifications not expressly approved by the pa rty responsible for compliance could void the user's authority to operate the equipm ent. 2. Shielded interface cables and AC pow er cord, if any , must be used in order to com ply with the emission limits. 3. The manufacturer is not respons ible for ...
-
Hanns.G HSG1033 - page 7
User’s Manual SPECIAL NOTES ON LCD MONIT ORS The following symptoms are norm al with LCD monitor and do not indicate a problem. • Due to the nature of the fluorescent light, the s creen may flicker during initial use. T urn off the Power Switch and then turn it on again to make sure the flicker disappears. • Y ou may find slightly uneven brig ...
-
Hanns.G HSG1033 - page 8
User’s Manual BEFORE OPERA TING THE MONITOR FEA TURES • 19” W ide screen TFT Color LCD Monitor • Crisp, Clear Display for W indows • Recommended Resolutions : 1440 X 900@60Hz • EP A ENERGY ST AR ® • Ergonom ic Design • Space Savin g, Compact Case Design CHECKING THE CONTENTS OF THE P ACKAGE The product package should include the fo ...
-
Hanns.G HSG1033 - page 9
User’s Manual INST ALLA TION INSTRUCTIONS Install Remove Figure.1. Installing and Removing the Base INST ALLA TION: 1. Align the monitor with the opening in the base. 2. Note that the longer section of the base points forward. 3. Snap the monitor into its base. A clear click sound will affirm that th e base is connected correctly . 4. V erify tha ...
-
Hanns.G HSG1033 - page 10
User’s Manual MAKING CONNECTIONS CONNECTING TO A PC T urn off your computer before perform ing the procedure below . 1. Connect one end of the VGA cable to the back of the monitor and connect the other end to the computer ’ s D-Sub port. 2. Connect one end of the DVI-D cable (Dual input mode optional) to th e back of the monitor and connect the ...
-
Hanns.G HSG1033 - page 11
User’s Manual ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of the m onito r , and then adjust the monitor ’ s angle to your own preference. • Hold the stand so you do not topple the m on itor when you change the monitor ’ s angle. • The m onitor ’ s angle is adjustable from 0 ° to 20 ° ...
-
Hanns.G HSG1033 - page 12
User’s Manual OPERA TING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or of f. The other control butt ons are located on the front panel of the monitor (See Figu re 4). By changing these settings, the picture can be adjuste d to your personal preference. • The power cord should be connected. • Connect the Si ...
-
Hanns.G HSG1033 - page 13
User’s Manual FRONT P ANEL CONTROL • Power Button: Press this button to switch ON/OFF monitor ’ s power . • Power Indicator: Green — Power On mode. Orange — Power Saving m ode. • MENU / RETURN: 1. T urn the OSD menu on/of f or re turn to the previous menu. 2. Exit OSD menu when in volume OSD status. • Adjust ▲▼ : 1. Adjust Brigh ...
-
Hanns.G HSG1033 - page 14
User’s Manual HOW T O ADJUST A SETTINGS BRIGHTNESS/CONTR AST BRIGHTNESS Adjust the brightness value of the display according to your preference. Select 「 BRIGHTNESS 」 option to adjust the brightness value. CONTRAST Adjust the contrast value of the display accordin g to your preference. Select 「 CONTRAST 」 option to adjust the contrast val ...
-
Hanns.G HSG1033 - page 15
User’s Manual H-POSITION Select the 「 H-POSITION 」 option to shift the screen im age to the left or right. Enter the op tion and adjust the level. [For VGA only] V -POSITION Select the 「 V -POSITION 」 option to shift the screen im age up or down. Enter the option and adjust the level. [For VGA only] CLOCK Select the 「 CLOCK 」 option t ...
-
Hanns.G HSG1033 - page 16
User’s Manual 「 OSD COLOR 」 option under 「 OSD SETTING 」 menu, choose modes 1/2/3. SYSTEM AUDIO INPUT While transferring v ia the HDMI port, it is recommended to set AUDIO INPUT to HDMI; if no sound is outputted, it is recommended to select AUDIO INPUT as PC, and make sure the PC audio output cable is connect ed to monitor’s LINE IN (or ...
-
Hanns.G HSG1033 - page 17
User’s Manual PLUG AND PLA Y Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B c apa bilities according to the VESA DDC ST ANDARD. It allows the monitor to inform the host system of its identity and, depe nding on the level of DDC used, communicate additional information about its display capabilities. The DDC2B is a bidirect ...
-
Hanns.G HSG1033 - page 18
User’s Manual TECHNICAL SUPPOR T (F AQ) Q & A FOR GENERAL PROBLEMS PROBLEM & QUESTION POSSIBLE SOLUTION Power LED is not on *Check if the Power Switch is in the ON position. *Power Cord should be connected. No Plug & Play *Check if the PC system is Plug & Play compatible. *Check if the V ideo Card is Plug & Play compatible. *C ...
-
Hanns.G HSG1033 - page 19
User’s Manual and make sure PC audio out put cable is connected to monitor ＇ s LINE IN port(or AUDIO IN port). [For HDMI Input only] 19 ...
-
Hanns.G HSG1033 - page 20
User’s Manual ERROR MESSAGE & POSSIBLE SOLUTIONS CABLE NOT CONNECTED: 1. Check that the signal-cable is properly connect ed, If the connector is loose, tighten the connector ’ s screws. 2. Check the signal-cable’ s connection pins for damage. INPUT NOT SUPPOR T : Your computer has been set to unsuitable displa y mode, set the comp ...
-
Hanns.G HSG1033 - page 21
User’s Manual 29 1280×1024 @60Hz SXGA 63.981 60.02 30 1280×1024 @72Hz SXGA 76.02 71.448 31 1280×1024 @75Hz SXGA 79.976 75.025 32 1360×768 @60Hz SXGA 47.712 60.015 33 1400×1050@60Hz WXGA + 64.744 59.948 34 1400×1050@60Hz WXGA + 65.317 59.978 35 1440×900 @60Hz SXGA 55.469 59.901 36 1440×900 @60Hz SXGA 55.935 59.887 37 1440×900 @75Hz SXGA 7 ...
-
Hanns.G HSG1033 - page 22
User’s Manual APPENDIX SPECIF ICA TIONS Driving system TFT Color LCD Size 19” LCD Panel Pixel pitch 0.285mm(H) x 0.285mm(V) H-Frequency 24.8KHz – 82KHz V i deo V -Frequency 56Hz– 76Hz Display Colors 16.7M Colors Max. Resolution 1440 x 900 @75Hz Plug & Play VESA DDC2B TM ON Mode ≤ 42W Power Saving Mode ≤ 2W EP A ENERGY ST AR ® OFF M ...
Haben Sie eine Frage bezüglich Hanns.G HSG1033?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Hanns.G HSG1033 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Hanns.G HSG1033 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.