Bedienungsanleitung Grundig LXW 70-8620

35 Seiten 3.64 mb
Download

Zur Seite of 35

Summary
  • Grundig LXW 70-8620 - page 1

    ǵ COLOR TELEVISION LENARO 27 LXW 70-8620 DOLBY LENARO 32 LXW 82-8620 DOLBY DEUTSCH ENGLISH FRANÇAIS IT ALIANO NEDERLANDS POLSKI ...

  • Grundig LXW 70-8620 - page 2

    2 CONTENTS ____________________________________________ 3-4 Set-up and safety 5 Connection/Preparation 5 Connecting the antenna and the mains cable 5 Inserting batteries in the remote control 6-9 Overview 6 Connections on the television 7 Controls on the television 8-9 The remote control 10-13 Settings 10 Setting television channels automatically 1 ...

  • Grundig LXW 70-8620 - page 3

    ENGLISH 3 SET -UP AND SAFETY ___________________________ Please note the following information when setting up your television set. This television set is designed to receive and display video and audio signals. Any other use is expressly prohibited. The ideal viewing distance is 5 times the screen diagonal. External light falling on the screen imp ...

  • Grundig LXW 70-8620 - page 4

    4 Please note when deciding where to put the device that furniture surfaces are covered by various types of lacquer and plastic, most of which contain chemical additives. These may cause corrosion to the feet of the device, thus resulting in stains on the surface of the furniture which can be difficult or impossible to remove. The screen of your LC ...

  • Grundig LXW 70-8620 - page 5

    ENGLISH 5 CONNECTION/PREP ARA TION __________ Connecting the antenna and the mains cable 1 Plug the antenna cable of the rooftop antenna into the »ANT IN« anten- na socket on the television. 2 Plug the mains cable supplied into the »AC IN« mains socket of the tele- vision. 3 Plug the mains cable into the wall socket. Note: Only plug the device ...

  • Grundig LXW 70-8620 - page 6

    6 OVER VIEW ____________________________________________ Connections on the television AV 2 Euro/A V socket (FBAS signal). AV 1 Euro/A V socket (FBAS signal, RGB signal). A V OUT V L R Audio and video output. ANT -IN Antenna socket. COMPONENT VIDEO INPUT AUDIO LR Audio signal input (YUV signal). Y Pb Pr Video signal input (YUV signal). DVI-D DVI-D ...

  • Grundig LXW 70-8620 - page 7

    ENGLISH 7 Controls on the television Ȃ Power switch, switches the device to and from standby mode. –P + Switch the television on from standby . Channel selection. Select a function in the menu. TV/A V Opens the pre-selection for A V channels. Select within the menu with » P + « or » – P «, confirm with » – z «. MENU Opens the »MAIN ME ...

  • Grundig LXW 70-8620 - page 8

    8 OVER VIEW ____________________________________________ The remote control Ǽ Switches off the television set (stand-by). 1...0 Switches the television on from standby mode Selects channels directly . ? Displays the number and name of a station. Switches to double character size in teletext mode. E Switches between picture formats. Page stop in te ...

  • Grundig LXW 70-8620 - page 9

    ENGLISH 9 OVER VIEW ____________________________________________ SCAN Reveals answers in teletext mode. PAT Selects the Double Window function. S Selects the sub-pages in teletext mode. P Updates a page in teletext mode. DR, DVD Switches to operation of a GRUNDIG digital receiver , GRUNDIG digital receiver with hard disk (PDR), GRUNDIG DVD player o ...

  • Grundig LXW 70-8620 - page 10

    10 Setting television channels automatically The television set is equipped with an automatic channel search system. Y ou start the search and can then sor t the television channels into your order of preference. 99 preset positions are provided, to which you can assign television channels from the antenna or from the cable connection. 1 Switch on ...

  • Grundig LXW 70-8620 - page 11

    ENGLISH 11 Sorting television channels 1 In the »Program table« menu, select the channel to be moved with with » P+ «, » P- «, » Ǹ « or » Ƿ «. 2 Highlight the channel with » Ȅ « (green). 3 Select a new channel position by pressing » P+ «, » P- «, » Ǹ « or » Ƿ « and then press » Ȅ « to confirm. – All of the channels tha ...

  • Grundig LXW 70-8620 - page 12

    12 Picture settings 1 Press » i « to open the »MAIN MENU«. – The »MAIN MENU« appears. 2 Select »Picture« with » P+ « or » P- « and confirm with » OK «. – The »Picture« menu appears. 3 Select »Default settings« with » P+ « or » P- « and the setting »User« with » Ǹ « or » Ƿ «. 4 Select »Brightness«, »Contrast«, ? ...

  • Grundig LXW 70-8620 - page 13

    ENGLISH 13 Dolby Vir tual * Dolby Virtual is an innovative electronic solution, which is integra- ted in the television set and only requires the built-in speakers to produce Dolby Surround effects. 1 Select »Sound mode« with » P+ « or » P- «. 2 Select »Dolby Virtual« with » Ǹ « or » Ƿ «. Stereo width Widens the audio output for stere ...

  • Grundig LXW 70-8620 - page 14

    14 Basic functions Switching on and off 1 Press » Ȃ « on the television set to switch it to standby . 2 Press » 1… 0 « or » P+ « or » P- « to switch on the device from standby mode. 3 Press the » Ǽ « button to switch the television to standby mode. 4 Press » Ȃ « on the television set to switch it off completely . – This saves ele ...

  • Grundig LXW 70-8620 - page 15

    ENGLISH 15 Picture settings Y ou can select four different picture settings. 1 Select the desired picture setting from »User«, »Natural«, »Rich« or »Soft« with » z «. – Y ou can alter the »User« picture setting, see the ”Picture settings” chapter on page 12. Audio settings Y ou can select six different audio settings. 1 Select the ...

  • Grundig LXW 70-8620 - page 16

    16 Zoom function This function enables you to enlarge the television or PC picture. 1 Press » i « to open the »MAIN MENU« menu. – The »MAIN MENU« menu appears. 2 Select »Picture« with » P+ « or » P- « and press » OK « to confirm. – The »Picture« menu appears. 3 Select »Brightness« with » P+ « or » P- « and press » P+ « a ...

  • Grundig LXW 70-8620 - page 17

    ENGLISH 17 Changing the picture format The television automatically switches to the 16:9 format if this format is detected via the Euro-A V socket. 1 Select the picture format with » E «. The selected picture format, for example »16:9«, appears on the screen. – Y ou can choose between the following picture formats: »4:3« format The picture ...

  • Grundig LXW 70-8620 - page 18

    18 PIP mode PIP (picture in picture) allows you to watch an inset picture from a second picture source in addition to the current channel. Other television stations, DVD players, video recorders or satellite receivers can be used as video sources. They must be connected to the input sockets on the back of the device. Displaying the inset picture 1 ...

  • Grundig LXW 70-8620 - page 19

    ENGLISH 19 TOP text or FLOF text mode 1 Press » TXT « to switch to teletext mode. 2 Y ou can directly select teletext pages with » 1. . . 0 «. Note: At the bottom of the screen, you will see an information line consisting of a red, green and, depending on the station, yellow and blue text field. Y our remote control has buttons with the corresp ...

  • Grundig LXW 70-8620 - page 20

    20 Page stop A multiple page may contain several sub-pages, which are automa- tically scrolled by the transmitting station. 1 Stop the sub-pages with » E «. 2 Press » E « to quit the function. Calling up a sub-page directly If the selected teletext page contains further pages, the number of the current sub-page as well as the total number of pa ...

  • Grundig LXW 70-8620 - page 21

    ENGLISH 21 Convenience functions with the »Features« menu 1 T o open the »MAIN MENU« press » i «. 2 Select »Features« with » P+ « or » P- « and confirm with » OK «. Note: Further operation is explained in the following sections. Changing the menu language 1 Select »Menu Language« with » P+ « or » P- « and confirm with » OK «. ...

  • Grundig LXW 70-8620 - page 22

    22 USING EXTERNAL DEVICES _______________ DVD player , DVD recorder , video recorder or set-top box Note: Which television socket(s) you connect your external devices to depends on the sockets the external device is equipped with and the signals which are available. Note that with many external devices the resolution of the video signal must be ada ...

  • Grundig LXW 70-8620 - page 23

    ENGLISH 23 With a digital audio/video signal Video signal: digital video; resolution: standard 576p; HDTV 720p, 1080i. Audio signal: stereo, analogue. Channel position »DVI«. 1 Connect the » DVI-D « socket on the television and the corre- sponding DVI socket on the external device using a standard DVI cable (digital video and audio signal). 2 C ...

  • Grundig LXW 70-8620 - page 24

    24 With S-Video signal Video signal: Y/C. Audio signal: stereo, analogue. Channel position »SVHS«. 1 Connect the » S-VHS « socket on the television and the corre- sponding socket on the external device using an S-Video cable (video signal). 2 Connect the » LR « sockets on the television to the correspond- ing sockets on the external device us ...

  • Grundig LXW 70-8620 - page 25

    ENGLISH 25 USING EXTERNAL DEVICES _______________ Selecting the signal for the A V output With this setting you can select which signal is output at the Euro-A V socket A V1 or at the A V OUT V L R cinch sockets. The television station or the video/audio signal from connected devices. This enables you to transmit recordings from one external device ...

  • Grundig LXW 70-8620 - page 26

    26 USING EXTERNAL DEVICES _______________ Decoder or satellite receiver In order for the television to receive encoded programs from a privately operated station, a decoder is needed. Connecting a decoder or satellite receiver 1 Connect the » AV 1 « socket on the television set and the appro- priate socket on the decoder using a EURO-A V cable. U ...

  • Grundig LXW 70-8620 - page 27

    ENGLISH 27 USING EXTERNAL DEVICES _______________ Camcorder Connecting the camcorder 1 Connect the yellow socket » Video « on the television and the corresponding socket on the camcorder (VHS, Video 8) with a cinch cable (picture signal); or connect the » S-VHS « socket (picture signal) on the television and the corresponding socket on the camc ...

  • Grundig LXW 70-8620 - page 28

    28 Connecting a PC 1 Connect the socket » PC-IN « or » DVI-D « on the television to the corresponding socket on the PC using a VGA cable. 2 Connect the socket » PC-DVI AUDIO IN « on the television to the corresponding socket on the PC using a cinch cable (audio signal). Note: Adjust your PC to the monitor (for example, picture resolution 1024 ...

  • Grundig LXW 70-8620 - page 29

    ENGLISH 29 Setting television channels This setting is only necessar y if a new channel comes on air and you do not want to change the order of your channels. The television channel can be set directly or using the search. Setting channels using the search 1 Press » i « to open the »MAIN MENU«. – The »MAIN MENU« appears. 2 Select »Setup« ...

  • Grundig LXW 70-8620 - page 30

    30 Fine tuning television channels The television automatically tunes itself to the best possible recepti- on. Y ou may need to carr y out manual fine tuning in areas where there is poor reception. 1 Press » i « to open the »MAIN MENU«. – The »MAIN MENU« appears. 2 Select »Setup« with » P+ « or » P- « and confirm with » OK «. – Th ...

  • Grundig LXW 70-8620 - page 31

    ENGLISH 31 Re-tuning all television channels Y ou can re-tune all the television stations, for example if you move to another town. 1 Press » i « to open the »MAIN MENU«. 2 Select »Setup« with » P+ « or » P- « and confirm with » OK «. – The »Setup« menu appears. 3 Select »A TS« with » P+ « or » P- « and confirm with » OK «. ...

  • Grundig LXW 70-8620 - page 32

    32 T echnical data Operating voltage: 230 V , 50/60 Hz Power consumption: in operation 120 W in standby approx. 2 W (Lenaro 27) in operation 165 W in standby approx. 2 W (Lenaro 32) Sound output: 2 x 14 watts music (2 x 7 sine wave) (Lenaro 27) 2 x 20 watts music (2 x 10 sine wave) (Lenaro 32) Reception range: C01 … C80, special channels S01 … ...

  • Grundig LXW 70-8620 - page 33

    ENGLISH 33 INFORMA TION _____________________________________ Fault Screen lit (snow), but no station Poor picture contrast Interference to picture and/or sound Ghosts, reflection No colour Picture but no sound T eletext missing or faulty Remote control does not work Picture is dark in PC mode Possible cause Antenna cable No television station pro- ...

  • Grundig LXW 70-8620 - page 34

    34 Additional Information for units sold in the UK. Units sold in the UK are suitable for operation from a 240V ac, 50Hz mains supply . The range of multi-system receivers is built to work in most European coun- tries. However , the mains plug and socket system for the UK differs from many European countries. This appliance has been supplied with a ...

  • Grundig LXW 70-8620 - page 35

    Grundig Multimedia B.V . • Atrium, Strawinskylaan 3105 • NL-1077 ZX Amsterdam • http://www .grundig.com ...

Produzent Grundig Kategorie CRT Television

Dokumente, die wir vom Produzenten des Geräts Grundig LXW 70-8620 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Grundig
- Bedienungsanleitungen LXW 70-8620
- Produktkarten Grundig
- Informationsbroschüren
- oder Energieetiketten Grundig LXW 70-8620
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Grundig LXW 70-8620.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Grundig LXW 70-8620, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Grundig LXW 70-8620. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Grundig LXW 70-8620 ansehen.

Die komplette Bedienungsanleitung des Geräts Grundig LXW 70-8620, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Grundig LXW 70-8620 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Grundig LXW 70-8620 verständlich ist.

Eine gänzliche Bedienungsanleitung von Grundig sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Grundig LXW 70-8620 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Grundig LXW 70-8620 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Grundig LXW 70-8620, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Grundig LXW 70-8620 - die uns die ersten Schritte während der Nutzung von Grundig LXW 70-8620 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Grundig LXW 70-8620 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Grundig LXW 70-8620 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Grundig LXW 70-8620?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Grundig LXW 70-8620 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Grundig LXW 70-8620 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)