-
Intel 845GV - page 1
Intel845GL/GV Main board User’s Manual Rev: 1.0/1.2 PCB: M248 CONTENTS CHAPTER 1 PACKAGE CONTENTS………………….………………… CHAPTER 2 INTRODUCTION……………………….…………………... CHAPTER 3 MAIN BOARD LOCATIONS………………………………. CHAPTER 4 INSTALLATION…………………………….……? ...
-
Intel 845GV - page 2
Chapter 1 Package Contents Your main board package contains the following items: 1. One M248 Rev:1.0/1.2 main board 2. One 80-Pin Ultra DMA 66/100 IDE drive ribbon cable 3. One 34-Pin Floppy drive ribbon cable 4. One front panel connector ribbon cable (optional) 5. Software Install CD 6. One user’s manual Chapter 2 Introduction This main board ha ...
-
Intel 845GV - page 3
-Integrated display function technologies without extend VGA card Integrated 2D/3D Graphics Controller -USB Ports Six USB ports Supports compliant with Universal Se rial Bus Specification Revision 2.0 -BIOS Supports Supports Plug and Play Supports Advanced Power Management Interface -IDE Port Provides two channel connecting four IDE drives Supports ...
-
Intel 845GV - page 4
Chapter 3 Main board Locations ...
-
Intel 845GV - page 5
Chapter 4 Installation 4.1 Jumper Setting and Slot FSB CPU Frequency Jumper Setting JUMPER AUTO (Default) 400 533 JP1 1-2 2-3 OPEN JP3: Clear CMOS Jumper Setting 1-2 (Default) Normal 2-3 Clear CMOS Audio: Front panel Jumper setting PIN Function PIN Function 1 MIC+ 2 Ground 3 Vbias 4 AuD_Vcc (AVCC) 5 AuD_R_Out 6 AuD_R_Out Back 7 N.C. 8 Key 9 AuD_L_O ...
-
Intel 845GV - page 6
Connectors PS/2 (Bottom) PS/2 Keyboard (Down Purple) PS/2 (Top) PS/2 Mouse Header (Up Green) USB 0/1 USB 0/1 Connector Port USB 2/3 USB 2/3 Connector Port LPT Printer Connector Port VGA VGA Display Connector Port COM1 Serial Ports COM1 Connector Port GAME/MIDI Game/MIDI Port LINE OUT/LINE IN/MIC Audio Output/Audio Input/Microphone CD_IN CD-ROM Audi ...
-
Intel 845GV - page 7
...
-
Intel 845GV - page 8
4.3 Memory installation This main board supports DDR200/ DDR266 DDR memory you may install 64/128/256/512MB 184 pin DDR memory. DDR SDROM uses additional power and ground lines and requires 184-pi n 2.5V unbuffered DIMM modul e rather than the 168- pin 3.3V unbuffered DIMM used by SDRAM. Follow these instructions to install the Mem ory: 1. Push the ...
-
Intel 845GV - page 9
4.5 Other Device Installation 4.5.1 Floppy Disk Drive Installation This main board ships with a floppy disk driv e cable that can support one or two drives. Drives can be 3.5” or 5.25” wide, with capacities of 360K, 720K, 1.2MB, 1.44MB, or 2.88MB. Install your drives and conn ect power from the system power supply. Use the cable provided to con ...
-
Intel 845GV - page 10
These connectors connect to an ATX 12V power supply. The plugs from the power supply are designed to fit these connector s in only one orientation. Find the proper orientation and push down firmly until the conn ectors completely fit. In ad dition to the 20-pin ATXPWR1 connector, connect the 4-pin ATX +12v power plug to provide sufficient power to ...
-
Intel 845GV - page 11
Click “NEXT” to continue Select “YES” to continue ...
-
Intel 845GV - page 12
Select “NEXT” to continue Select “FINISH” comp leting the installation. ...
-
Intel 845GV - page 13
5.3 IAA (Intel Application Accelerator) Setup Insert the driver CD, running driver software CD, choose the directory: CD-ROM:INTELIAAXXX Click “Next” to continue Select “Yes” to continue ...
-
Intel 845GV - page 14
Select “Next” to continue Select “Next” to Continue ...
-
Intel 845GV - page 15
Select “Finish” to complete the ins tallation 5.4 Sound Driver Setup 5.4.1 Sound driver setup (For Realtek s eries of WIN98 operation system) Insert the driver CD, running dr iver software CD, choose the Directory:CD-ROM:SOUN DREALTEKSETUP.EXE Select “Next” to continue ...
-
Intel 845GV - page 16
Select “Finish” to complete the ins tallation Channel Sound Output Support Please follow the steps below for operation (optional): 1. After install sound driver’ click “Sound eff ect”, “AC97 audio configuration” options; 2. Click “Sound configuration” select “6 Ch annel mode for 5.1 speakers output” options. 3. Click “Sound ...
-
Intel 845GV - page 17
Select “Device manager” to continue Select “PCI Universal Serial Bu s” and double click to continue ...
-
Intel 845GV - page 18
Select “Reinstall Dr iver” to continue Select “Next” to continue ...
-
Intel 845GV - page 19
Select “Next” to continue Select “Specify a location” and type “F:INTELUSB20845WIN98_ME” that ...
-
Intel 845GV - page 20
Select “Next” to continue Select “Next” to Continue ...
-
Intel 845GV - page 21
Select “Next” to Continue Select “Next” to Continue ...
-
Intel 845GV - page 22
Select “OK” to Continue Type “F:INTELUSB20845WIN98_ME” that Select “OK” to continue Select “Finish” continuing 5.5.2 Windows 2000/XP driver setup, new may run windows update to setup by internet. ...
-
Intel 845GV - page 23
Chapter 6 BIOS Setup The BIOS Setup Utility record settings and in for mation of your computer, such as date and time, the type of hardware installed, and various configuration settings. Your computers applies those information to in itia lize all the compone nt’s when booting up and basic function of coordinati on between system components. If t ...
-
Intel 845GV - page 24
Setup BIOS provides function, for example virus, boot-strap induct ¾ Advanced Chipset Features Setup main board chipset parameter’ for exam ple DRAM Timing ¾ Integrated Peripherals Setup include main board all peripherals drive ¾ Power Management Setup Setup CPU, Hard disk, Monitor drive power save mode ¾ PnP/PCI Configurations Setup PnP and ...
-
Intel 845GV - page 25
¾ Boot Other Device If you enable this item, the system will also s earch for other boot devices if it fails to find an operating system from the first two locations. ¾ Swap Floppy Drive If you have two diskette drives instal led and you enable this item, drive A becomes drive B and drive B becomes drive A. 6.4 Advanced Chipset Features ¾ DRAM T ...
-
Intel 845GV - page 26
¾ Init Display First When boot-start the first time detect device Default: PCI slot ¾ Onboard FDC Controller Setup onboard FDC controller Default: Enabled ¾ Onboard Serial Port ½ Setup onboard serial Port ½ Default: 3F8/IRQ4 ¾ UART Mode Select Setup UART mode select Default: Normal ¾ Onboard Parallel port Setup select parallel port Default: ...
-
Intel 845GV - page 27
6.8 Frequency/Voltage Control ¾ Auto Detect PCI CIK Setup auto detect PCI clock Default: Enabled ¾ CPU Clock Setup CPU BUS frequency Note: The main board auto detect CPU fr equency ‘so you needn’t setup CPU frequency by yourself the CPU can display normal. 6.9 Load Fail-Safe Defaults If you select this item and press enter a dialog box appear ...
Haben Sie eine Frage bezüglich Intel 845GV?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Intel 845GV nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Intel 845GV hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.