Bedienungsanleitung Furuno GP-1610C

16 Seiten 0.28 mb
Download

Zur Seite of 16

Summary
  • Furuno GP-1610C - page 1

    1 The purpose of this Operator's Guide is to provide the basic operating procedures for this equipment. For more detailed information see the operator's manual. Course bar 01 Position-fixing mod e Time Position CSE 350.0 ° SPD 16.8kt 2D DEP 110 m TMP 16.0 ° C 13:42 POS 34 ° 26.345’N 135 ° 41.232’E Ship’s track Waypoint (Marks im ...

  • Furuno GP-1610C - page 2

    2 Do not disassemble or modify the equipment. Fire, electrical shock or serious injury can result. Turn off the power immediately if water leaks into the equipment or the equip- ment is emitting smoke or fire. Continued use of the equipment can cause fire or electrical shock. Do not place liquid-filled containers on the top of the equipment. Fire o ...

  • Furuno GP-1610C - page 3

    3 Inserting a Chart Card 1 T urn off the power . 2 Open the chart card drive cover at the bottom of the display unit. Screws Cover 3 Insert chart card label side up, arrow forward. EJEC T button Chart card Arrow forward 4 Close the chart card drive cover . T o eject a chart card: 1 Open the chart card drive cover . 2 Press the EJECT button. Note: I ...

  • Furuno GP-1610C - page 4

    4 Displaying the Plotter Picture Press the POWER key to turn on the equipment. A beep sounds and shortly thereafter the plotter display appears. Results of self-test; displayed for about one second. Warning on chart card usage; appears for about one minute. ACQ means acquiring satellite; position is not reliable. Plotter display (Position being cal ...

  • Furuno GP-1610C - page 5

    5 Adjusting T one and Brilliance TONE : 5   ■■■■■□□□□□   BRILL : 8   ■■■■■■■■ LOW     HIGH LOW     HIGH 1 Press the TONE key. 2 Press t or s to adjust tone. 3 Press ▲ or ▼ to adjust brilliance. Adjust tone or brilliance within 10 seconds, otherwise the display will be erased. Ten l ...

  • Furuno GP-1610C - page 6

    6 How to Use the Cursor 1 Press ▲ ▼ t s . Position Cursor position is digi- tally displayed on the screen. The CURS key alternately displays and erases the cursor. BRG+ 232.0 ° RNG+ 0.00nm 2D DEP 110 m TMP - - .- ° C 13:55 +    34 ° 43.801'N   135 ° 21.163'E Cursor intersection Cursor position in lattitude and longitude Bear ...

  • Furuno GP-1610C - page 7

    7 Registering Y our Harbor By registering your harbor as a waypoint, you can later use it as a destination waypoint, when returning home. 1 Press the WPT key.  3 Press the ENT key.  SELECT WPT MODE              WPT at Own Position CSE 180.0 ° SPD 0.0kt 2D DEP 110 m TMP - - .- ° C 14:35 POS 34 ° 26.345'N   135 ...

  • Furuno GP-1610C - page 8

    8 Setting Destination When you set a destination, this unit computes the range, bearing and course to the destina- tion. T o display your destination on the screen select a small display range or scale. T o set as destination a point which is 20 nm from your harbor do the following: CSE 180.0 ° SPD 0.0kt 2D DEP 110 m TMP - - .- ° C 14:40 POS 34 ? ...

  • Furuno GP-1610C - page 9

    9 3 Press the ENT key. 4 Place cursor on destination. 5 Press the ENT key twice. 00 WP801 175.0 ° 15nm CSE 180.0 ° SPD 0.0kt 2D DEP 110 m TMP - - .- ° C 14:57 POS 34 ° 26.345’N 135 ° 41.232’E Own ship’s position Course Bearing and range to destination Destination : Cursor ENT: Set ENT twice: complete MENU: SEL Mode Current position is ma ...

  • Furuno GP-1610C - page 10

    10 Sailing for Destination Steer towards destination. 00 WP801 175.0 ° 14.7nm CSE 175.0 ° SPD 16.8kt 2D DEP 110 m TMP - - .- ° C 15:00 POS 34 ° 26.345 ’ N 185 ° 41.232 ’E 00 WP801 175.0 ° 15nm CSE 180.0 ° SPD 16.8kt 2D DEP 110 m TMP - - .- ° C 15:00 POS 34 ° 26.345 ’ N 185 ° 41.232 ’E Steer towards destination. Course bar Steer th ...

  • Furuno GP-1610C - page 11

    11 MENU ESC DISP SEL 1 EVENT MOB 6 WPT 2 GOTO 7 MARK 3 PLTR 8 ZOOM OUT 9 CNTR 5 CLR TONE POWER ZOOM IN 4 CURS 0 NU/CU ENT 1 Arriving at Destination When nearing your destination, expand the range scale. Expand the display range or scale. 1 Press the ZOOM IN key. WP801 173.0 ° 5.2nm CSE 160.0 ° SPD 16.8kt 2D DEP 110 m TMP - - .- ° C 15:25 POS 33 ...

  • Furuno GP-1610C - page 12

    12 Entering Marks Marks may be used to denote the location of fish schools, good fishing spots, reefs, etc. 1 Press the MARK key. WP801 173.0 ° 5.2nm CSE 173.0 ° SPD 16.8kt 2D DEP 110 m TMP - - .- ° C 16:01 POS 33 ° 33.979 ’ N 137 ° 07.290 ’E WP801 170.0 ° 4.8nm CSE 171.0 ° SPD 16.8kt 2D DEP 110 m TMP - - .- ° C 16:07 POS 33 ° 26.154 ? ...

  • Furuno GP-1610C - page 13

    13 Changing Mark Shape, Color Y ou may wish to display marks in different shapes and colors to dif ferentiate between reefs and fish schools, for example. The procedure below shows how to change from red circle to green diamond. CSE 170.0 ° SPD 16.8kt 2D DEP 110 m TMP - - .- ° C 16:09 POS 33 ° 26.154’N 137 ° 03.731’E WP801 170.0 ° 4.8nm 1 ...

  • Furuno GP-1610C - page 14

    14 3 Press t to select MARK SHAPE. 5 Press ▼ twice to select MARK COLOR. 7 Press the ESC key. 8 Press the MARK key. CSE 177.0 ° SPD 16.8kt 2D DEP 110 m TMP - - .- ° C 16:15 POS 33 ° 21.832’N 137 ° 07.614’E WP801 170.0 ° 3.2nm Red 6 Press s twice to select GREEN. Green 4 Press s twice to select " ". MENU ESC DISP SEL 1 EVENT MOB ...

  • Furuno GP-1610C - page 15

    15 Returning to Harbor Set your harbor as destination, and the course, range and bearing to it are displayed on the screen. 1 Press the GOTO key. 3 Press the ENT key. Set waypoint 01, which you entered earlier, as destination. 4 Press the ENT key. CSE 320.0 ° SPD 0.0kt 2D DEP 110 m TMP - - .- ° C 17:30 POS 33 ° 24.327’N 136 ° 54.321’E WP001 ...

  • Furuno GP-1610C - page 16

    16 6 Press the CLR key. 7 Press the ENT key. 8 Press the ESC key. 9 Press the POWER key. Cancel destina- tion; turn off the equipment. SELECT GOTO MODE WPT List EVENT List ROUTE List Cursor/Route plan ENT: Sel CLR: Release ESC: Cancel 5 After arriving, press the GOTO key. Destination is cancelled and course line disappears. RELEASE GOTO ENT: YES ES ...

Produzent Furuno Kategorie GPS Receiver

Dokumente, die wir vom Produzenten des Geräts Furuno GP-1610C erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Furuno
- Bedienungsanleitungen GP-1610C
- Produktkarten Furuno
- Informationsbroschüren
- oder Energieetiketten Furuno GP-1610C
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Furuno GP-1610C.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Furuno GP-1610C, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Furuno GP-1610C. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Furuno GP-1610C ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Furuno GP-1610C, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Furuno GP-1610C hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Furuno GP-1610C verständlich ist.

Eine gänzliche Bedienungsanleitung von Furuno sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Furuno GP-1610C bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Furuno GP-1610C befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Furuno GP-1610C, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Furuno GP-1610C - die uns die ersten Schritte während der Nutzung von Furuno GP-1610C erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Furuno GP-1610C hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Furuno GP-1610C im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Furuno GP-1610C?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Furuno GP-1610C nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Furuno GP-1610C hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)