Bedienungsanleitung Alvarez SA1521z

13 Seiten 0.83 mb
Download

Zur Seite of 13

Summary
  • Alvarez SA1521z - page 1

    1 SA1521z REPAIR MANUAL ...

  • Alvarez SA1521z - page 2

    2 These instructions are intended to help restore any ailing SA1521z Active Loudspeaker back to factory working conditions. They show how to remove and replace the drivers and the ampli fi er assembly. Please contact Mackie Tech Support (1-800-898-3211) to receive a Service Request Number and Order Number for parts needed for this restoration. The ...

  • Alvarez SA1521z - page 3

    3 Led PCB replacement: 3 Carefully begin to remove the grill. Do not fully remove the grill as the cable is still fi rmly attached to the led PCB assembly. 2 Keep the six screws in a safe place. 4 Carefully remove the cable attached to the led PCB assembly. 1 Three screws need to be removed from each side of the grill using the phillips head screw ...

  • Alvarez SA1521z - page 4

    4 6 Carefully remove the led PCB assembly from the back side of the grill. Led PCB replacement continued: 7 The hard part is done, the rest is easy! Place the new led PCB assembly (part #0007334) where the old one was. Follow the same steps as above, but backwards 6 to 1. Power up the SA1521z and the led should light up. Congratulations, you just r ...

  • Alvarez SA1521z - page 5

    5 Woofer replacement: 1 Follow steps 1-4 of the led PCB replacement instructions, as the grill will need to be removed in order to access the woofer. 2 Eight screws and washers need to be removed from the woofer using the 4mm allen wrench. 3 Keep the eight screws and fl at washers in a safe place. 4 Carefully begin to remove the woofer. This woofe ...

  • Alvarez SA1521z - page 6

    6 Woofer replacement continued: 6 Remove the cables from their terminals simply by pushing down on the terminal and pulling out the cable. 7 This is what it looks like with the grill and woofer removed. Place the new woofer (part #0013918) where the old one was. Follow the same steps as above, but backwards 6 to 1, making sure to keep the led PCB a ...

  • Alvarez SA1521z - page 7

    7 High Frequency Driver replacement: 1 Follow steps 1-4 of the led PCB replacement instructions, as the grill will need to be removed in order to access the high frequency driver. 2 Eight screws and washers need to be removed from the horn using the phillips head screwdriver. 3 Keep the eight screws and fl at washers in a safe place. Note: There a ...

  • Alvarez SA1521z - page 8

    8 High Frequency Driver replacement continued: 5 The positive (solid blue) and negative (blue and black) cables are still attached to the high frequency driver terminals. Remove the cables from their terminals simply by pushing down on the terminal and pulling out the cable. 7 Keep the four nuts, four fl at washers, and four locking washers in a s ...

  • Alvarez SA1521z - page 9

    9 High Frequency Driver replacement continued: 9 The high frequency driver should easily lift right off of the horn assembly. Holding down the horn assembly with one hand while lifting up on the driver with the other hand may help. 8 Keep the four headless screws in a safe place, as well. 10 This is a straight down shot of the horn assembly. There ...

  • Alvarez SA1521z - page 10

    10 3 The horn is shown above with the high frequency driver circled. Four screws need to be removed from the driver using the 3mm allen wrench. 4 Keep the four screws in a safe place. 5 The diaphragm and plate adapter are easily removed from the horn assembly. They may not be broken down any further. Place the new diaphragm (part # coming soon) and ...

  • Alvarez SA1521z - page 11

    11 Ampli fi er Assembly replacement: 1 Fourteen screws need to be removed from the ampli fi er assembly using the phillips head screwdriver. The ampli fi er assembly is capped by two cover plates (part #33901380) outlined above. 3 The covers may be worked loose by wedging a fl at head screwdriver in between the cabinet and the cover, as well as ...

  • Alvarez SA1521z - page 12

    12 Ampli fi er assembly replacement continued: 4 Once the two cover plates are removed, two more screws need to be taken out in order to separate the ampli fi er assembly from the cabinet. Keep the two screws in a safe place. 5 The ampli fi er assembly is now ready to be separated from the cabinet. Do not completely take the ampli fi er assembl ...

  • Alvarez SA1521z - page 13

    13 7 Place the new ampli fi er assembly (part #0013838-00) where the old one was. Follow the same steps as above, but backwards 6 to 1. Remove the serial number from the faulty ampli fi er assembly (as shown in picture above) and place on the new ampli fi er assembly. Power up the SA1521z and relish in the fact that you just replaced an ampli ? ...

Produzent Alvarez Kategorie Car Speaker

Dokumente, die wir vom Produzenten des Geräts Alvarez SA1521z erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Alvarez
- Bedienungsanleitungen SA1521z
- Produktkarten Alvarez
- Informationsbroschüren
- oder Energieetiketten Alvarez SA1521z
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Alvarez SA1521z.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Alvarez SA1521z, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Alvarez SA1521z. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Alvarez SA1521z ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Alvarez SA1521z, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Alvarez SA1521z hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Alvarez SA1521z verständlich ist.

Eine gänzliche Bedienungsanleitung von Alvarez sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Alvarez SA1521z bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Alvarez SA1521z befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Alvarez SA1521z, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Alvarez SA1521z - die uns die ersten Schritte während der Nutzung von Alvarez SA1521z erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Alvarez SA1521z hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Alvarez SA1521z im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Alvarez SA1521z?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Alvarez SA1521z nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Alvarez SA1521z hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)