Deutsch dropdown-ico

Bedienungsanleitung Cabletron Systems 9T425-16

40 Seiten 0.44 mb
Download

Zur Seite of 40

Summary
  • Cabletron Systems 9T425-16 - page 1

    9032172-04 SmartSwitch 9000 9T425-16, 9T427-16, and 9T428-16 Token Ring Module User’s Guide ...

  • Cabletron Systems 9T425-16 - page 2

    ...

  • Cabletron Systems 9T425-16 - page 3

    i Notice Notice Cabletron Systems r eserves the right to make changes in speciÞcations and other information contained in this document without prior notice. The reader should in all cases consult Cabletr on Systems to determine whether any such changes have been made. The hardwar e, Þrmware, or softwar e described in this manual is subject to ch ...

  • Cabletron Systems 9T425-16 - page 4

    ii Notice FCC Notice This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference r eceived, including interference that may cause undesir ed operation. NOTE: This equipment has been tested and found to c ...

  • Cabletron Systems 9T425-16 - page 5

    iii Notice DECLARA TION OF CONFORMITY Application of Council Directi ve(s): 89/336/EEC 73/23/EEC Manufacturer’ s Name: Cabletron Systems, Inc. Manufacturer’ s Address: 35 Industrial Way PO Box 5005 Rochester, NH 03867 European Representati ve Name: Mr. J. Solari European Representati ve Address: Cabletron Systems Limited Nexus House, Newbury Bu ...

  • Cabletron Systems 9T425-16 - page 6

    Notice iv ...

  • Cabletron Systems 9T425-16 - page 7

    v Contents Chapter 1 Intr oduction Features........................................................................................................................... 1-1 Related Manuals ............................................................................................................ 1-4 Getting Help ..................................... ...

  • Cabletron Systems 9T425-16 - page 8

    Notice vi Chapter 5 Specifications Safety ............................................................................................................................... 5-1 Service ............................................................................................................................. 5-1 Physical ............................ ...

  • Cabletron Systems 9T425-16 - page 9

    1-1 Chapter 1 Intr oduction The 9T425-16, 9T427-16, and 9T428-16 T oken Ring SmartSwitch 9000 ª Modules are Enterprise Backbone switches supporting Smart Networking Services, RMON per port and Dedicated T oken Ring. The 9T425-16, 9T427-16, and 9T428-16 modules (shown in Figure 1-1) pr ovide sixteen ports, either UTP or STP for the 9T425-16 and 9T4 ...

  • Cabletron Systems 9T425-16 - page 10

    Introduction 1-2 Figure 1-1. The 9T425-16, 9T427-16, and 9T428-16 SmartSwitch 9000 Modules TOKEN RING 9T427-16 STN Mb/s LED MODE 5 6 7 8 1 2 3 4 11 12 13 14 15 16 9 10 TX STN RX Mb/s TX STN RX Mb/s TX STN RX Mb/s TX STN RX Mb/s TX STN RX Mb/s TX STN RX Mb/s TX STN RX Mb/s TX STN RX Mb/s TX STN RX Mb/s TX STN RX Mb/s TX STN RX Mb/s TX STN RX Mb/s TX ...

  • Cabletron Systems 9T425-16 - page 11

    1-3 Introduction P acket Switching Packet Switching occurs between the front panel T oken Ring connections and/or to any other module in the chassis via the INB2 bus. These modules are capable of T ransparent Bridging or Sour ce Route T ranslational Bridging. IEEE 802.1d Spanning T ree Pr otocol is supported in all bridging functions. Source Route ...

  • Cabletron Systems 9T425-16 - page 12

    Introduction 1-4 SFVLAN (SecureF ast Vir tual LANS) The 9T425-16, 9T427-16, and 9T428-16 allow connection-orientated Switched V irtual Circuits (SVC). Protocol T ranslations The 9T425-16, 9T427-16, and 9T428-16 allow Òany-to-anyÓ connectivity for IPX, IP , SNA, Netbios, Appletalk protocols between T oken Ring and Ethernet, FDDI, and Fast Ethernet ...

  • Cabletron Systems 9T425-16 - page 13

    1-5 Introduction Getting Help For additional support related to this device or document, contact Cabletr on Systems using one of the following methods: Before calling Cabletron Systems, have the following information ready: ¥ Y our Cabletr on Systems service contract number ¥ A description of the failure ¥ A description of any action(s) already ...

  • Cabletron Systems 9T425-16 - page 14

    Introduction 1-6 ...

  • Cabletron Systems 9T425-16 - page 15

    2-1 Chapter 2 Installation Installing the Smar tSwitc h 9000 Module The SmartSwitch 9000 module may be installed into any two available slots. T o install, follow the steps below: 1. Remove the blank panels covering the slots that the module is being mounted in. All other slots must be cover ed if modules are not being installed, to ensur e proper ...

  • Cabletron Systems 9T425-16 - page 16

    Installation 2-2 Figure 2-1. Installing the Smar tSwitch 9000 Module 7 F LN K 8 F LN K F LN K 10 F LN K I NS 11 F LN K I NS 12 RX TX RX TX RX Circuit Card Card Guides Metal Back-Panel Receptacle for ESD wrist strap W arning: Ensure that the circuit card is between the card guides . Lock do wn the top and bottom plastic tabs at the same time, applyi ...

  • Cabletron Systems 9T425-16 - page 17

    2-3 Installation The Reset Switch The Reset switch is located on the front panel, under the top plastic tab as shown in Figure 2-2. It serves two functions: ¥ Pressing the r eset switch twice within three seconds causes the pr ocessor (i960) to reset. ¥ Pressing and holding the switch for thr ee or more seconds causes the module to shutdown. Pres ...

  • Cabletron Systems 9T425-16 - page 18

    Installation 2-4 Setting the Module Car d DIP Switch An eight position DIP switch is located just under the edge of the top module car d as shown in Figure 2-3. The functions of the switch ar e listed in T able 2-1. Figure 2-3. Location of Module DIP Switch 1 2 3 4 5 6 7 8 ...

  • Cabletron Systems 9T425-16 - page 19

    2-5 Installation See the Cautions at the end of this table. T able 2-1. Functions of DIP Switch Switch Function Description 8 Clear Password 1 When toggled, this switch clears user-enter ed passwords stor ed in NVRAM, and restor es the default passwords. Once r eset you can use the defaults or enter new passwords. 7 Clear NVRAM 2 The module uses NV ...

  • Cabletron Systems 9T425-16 - page 20

    Installation 2-6 Fr ont P anel Cabling This section details the front panel cabling for the 9T425-16, 9T427-16, and 9T428-16 modules. The 9T425-16 and 9T427-16 Modules This section shows the pin-outs for wiring cable to the front panel RJ45 connectors. Station P ort Pins Figure 2-4 illustrates the signal assignments for RJ45 station port pins. Figu ...

  • Cabletron Systems 9T425-16 - page 21

    2-7 Installation Lobe P ort Pins Figure 2-5 illustrates the signal assignments for RJ45 lobe port pins. Figure 2-5. RJ45 Lobe P or t Pins – Signal Assignments The 9T428-16 Module T able 2-2 lists signal tolerance speciÞcations for the Multimode Fiber Optic cable used for front panel connections. The Fiber Optic cable segments have ST connectors. ...

  • Cabletron Systems 9T425-16 - page 22

    Installation 2-8 Figure 2-6. Connecting Fiber Optic cable to the 9T428-16 Recommended Cable Lengths The IEEE 802.5 speciÞcation does not specify a minimum lobe length in meters that a T oken Ring station must meet. Rather the standar d speciÞes Cable Attenuation, Signal to Crosstalk Noise Ratio (SCNR) and a Next Loss to Insertion Loss Ratio (NIR) ...

  • Cabletron Systems 9T425-16 - page 23

    2-9 Installation T able 2-3. 16 MBPS (Station Mode) - 9T425-16/9T427-16 Cable T ype Passive MAU (meters) Active MAU (meters) Category 3 UTP 55 100 Category 4/5 UTP 100 180 T ype 1 STP 200 300 T able 2-4. 4 MBPS (Station Mode) - 9T425-16/9T427-16 Cable T ype Passive MAU (meters) Active MAU (meters) Category 3 UTP 150 250 Category 4/5 UTP 250 350 T y ...

  • Cabletron Systems 9T425-16 - page 24

    Installation 2-10 Defaults When the module is installed, the parameters listed below are the defaults. These can be changed by Local Management or by SNMP management. Ring Speed (or Media Rate) Defaults to a 16Mbps ring speed. Ring Numbers Default to the T oken Ring port number (i.e., port 3 = ring number 3). If ÒAuto-Detect Ring NumberÓ is enabl ...

  • Cabletron Systems 9T425-16 - page 25

    3-1 Chapter 3 Operation The 9T425-16, 9T427-16, and 9T428-16 SmartSwitch 9000 Modules provide connectivity between the front panel T oken Rings and the INB2 backplane. SmartSwitch 9000 modules connect to either the Internal Network Bus (INB) or the Flexible Network Bus (FNB) bus. The 9T425-16, 9T427-16, and 9T428-16 modules connect only to the INB2 ...

  • Cabletron Systems 9T425-16 - page 26

    Operation 3-2 Figure 3-1. 9T425-16, 9T427-16, and 9T428-16 Block Dia gram All data packets destined for a front panel port, the INB, or the i960 ar e converted into the canonical format before forwar ding to the SmartSwitch 9000 ASIC. Network Interface Blocks (NIBs) check for valid data packets entering the system. If an error ed data packet is fou ...

  • Cabletron Systems 9T425-16 - page 27

    3-3 Operation Switching The 9T425-16, 9T427-16, and 9T428-16 operate as a Source Route T ranslational (SR-TB) switch. They provide translation to transpar ent frames. For information on conÞguring the switching function, see the addendum to the SmartSwitch 9000 Local Management User Õs Guide, containing information speciÞc to this model. All SR ...

  • Cabletron Systems 9T425-16 - page 28

    Operation 3-4 Sour ce Route and Sour ce Route T ranslational Switching In SR (Source Routing) and SR T (Source Route and T ransparent) modes, the received SR packets ar e stripped of their RIF during the translation to canonical frame format. Packets that are queued for transmission out the T oken Ring port can have a RIF inserted from the RIF cach ...

  • Cabletron Systems 9T425-16 - page 29

    3-5 Operation Spanning T ree Algorithm is a hierarchy (or tr ee) of priorities that bridges establish between themselves. This hierarchy guarantees that primary and r edundant data paths are clearly deÞned at all times, so that the network is continuously available to users. In a multiple bridge environment, one bridge in the network establishes i ...

  • Cabletron Systems 9T425-16 - page 30

    Operation 3-6 System Diagnostic Contr oller This diagnostic controller is composed of a Z-80 micr oprocessor and its supporting logic. The diagnostic controller is designed to contr ol the power-up sequencing of modules, monitor the 9T425-16, 9T427-16, and 9T428-16 input and output power parameters, keep watch over the main host processor , as well ...

  • Cabletron Systems 9T425-16 - page 31

    3-7 Operation learning. When operating in SecureFast Switch mode, all Þltering/forwar ding decisions are made based on a DA-SA pair and its receive port. The SmartSwitch 9000 hub can support modules operating in traditional switch mode and SecureFast Switch mode simultaneously . This pr ovides security when-and-where needed, and ease-of-conÞgurat ...

  • Cabletron Systems 9T425-16 - page 32

    Operation 3-8 ...

  • Cabletron Systems 9T425-16 - page 33

    4-1 Chapter 4 LANVIEW LEDs The front panel LANVIEW LEDs, shown in Figur e 4-1, indicate the status of the module and may be used as an aid in troubleshooting. Figure 4-1. LANVIEW LEDs TOKEN RING S M B C P U INB Mb/s STN Mb/s Mode System Status INB T ransmit T oken Ring P or t T ransmit T oken Ring P or t Receiv e INB Receive P or t Speed Station Mo ...

  • Cabletron Systems 9T425-16 - page 34

    LANVIEW LEDs 4-2 The 9T427-16 also has a front panel mode switch, shown in Figur e 4-2, that changes the functions of the LEDs. Figure 4-2. 9T427-16 LEDs and Mode Switch TOKEN RING 9T427-16 STN Mb/s LED MODE 5 6 7 8 1 2 3 4 11 12 13 14 15 16 9 10 TX STN RX Mb/s TX STN RX Mb/s TX STN RX Mb/s TX STN RX Mb/s TX STN RX Mb/s TX STN RX Mb/s TX STN RX Mb/ ...

  • Cabletron Systems 9T425-16 - page 35

    4-3 LANVIEW LEDs The functions of the two System Status LEDs, System Management Bus (SMB) and the CPU, are listed in T able 4-1. The functions of the INB receive LED ar e listed in T able 4-2. The functions of the INB transmit LED are listed in T able 4-3. T able 4-1. System Status LEDs (SMB and CPU) LED Color State Description Green Functional Ful ...

  • Cabletron Systems 9T425-16 - page 36

    LANVIEW LEDs 4-4 The functions of the T oken Ring Port r eceive LEDs are listed in T able 4-4. The functions of the T oken Ring Port transmit LEDs ar e listed in T able 4-5. The functions of the Station Mode LEDs are listed in T able 4-6. T able 4-4. T oken Ring Receive LEDs LED Color State Green Insert, No activity , Port Enabled Y ellow (Flashing ...

  • Cabletron Systems 9T425-16 - page 37

    4-5 LANVIEW LEDs The Port Speed LEDs show a combination of Ring Speed and Access Protocol in use. The functions of the Port speed LEDs are listed in T able 4-8. * TXI is T ransmit I mmediate or Full Duplex operation. TKP is T o k en P assing or standard T oken Ring. T able 4-7. Mode LEDs (9T428-16 Only) LED Color State Green Port is ConÞgured as S ...

  • Cabletron Systems 9T425-16 - page 38

    LANVIEW LEDs 4-6 ...

  • Cabletron Systems 9T425-16 - page 39

    5-1 Chapter 5 Specifications Safety This equipment meets the safety requir ements of: ¥ UL 1950 ¥ CSA C22.2 No. 950 ¥ EN 60950 ¥ IEC 950 ¥ EMI Requirements of FCC Part 15 Class A ¥ EN 55022 Class A ¥ VCCI Class I ¥ EMC requir ements of: EN 50082-1 IEC 801-2 ESD IEC 801-3 Radiated susceptibility IEC 801-4 EFT Service MTBF (MHBK-217E) >20 ...

  • Cabletron Systems 9T425-16 - page 40

    Specifications 5-2 Ph ysical Dimensions 35.0 D x 44.0 H x 6.0 W centimeters (13.8 D x 17.4 H x 2.4 W inches) W eight Unit: 1.4kg. (3lb) 9T427-16 2.7kgs. (6lbs.) 9T425-16 & 9T428-16 Shipping: 1.81kg. (4lbs.) 9T427-16 3.6kgs. (8lbs.) 9T425-16 & 9T428-16 Electrical CPU: i960 Local DRAM Memory: 20Mb (expandable to 48Mb) Flash: 4Mb (expandable ...

Produzent Cabletron Systems Kategorie Switch

Dokumente, die wir vom Produzenten des Geräts Cabletron Systems 9T425-16 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Cabletron Systems
- Bedienungsanleitungen 9T425-16
- Produktkarten Cabletron Systems
- Informationsbroschüren
- oder Energieetiketten Cabletron Systems 9T425-16
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Cabletron Systems 9T425-16.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Cabletron Systems 9T425-16, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Cabletron Systems 9T425-16. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Cabletron Systems 9T425-16 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Cabletron Systems 9T425-16, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Cabletron Systems 9T425-16 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Cabletron Systems 9T425-16 verständlich ist.

Eine gänzliche Bedienungsanleitung von Cabletron Systems sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Cabletron Systems 9T425-16 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Cabletron Systems 9T425-16 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Cabletron Systems 9T425-16, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Cabletron Systems 9T425-16 - die uns die ersten Schritte während der Nutzung von Cabletron Systems 9T425-16 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Cabletron Systems 9T425-16 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Cabletron Systems 9T425-16 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Cabletron Systems 9T425-16?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Cabletron Systems 9T425-16 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Cabletron Systems 9T425-16 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)