-
Miele NOVOTRONIC T 1576 - page 1
Oper ating Instr uctions V ented Dr y er T 1576 T o prevent accidents and machine damage read these instructions bef ore installation or use. V 05 686 571 M.-Nr . ...
-
Miele NOVOTRONIC T 1576 - page 2
2 ...
-
Miele NOVOTRONIC T 1576 - page 3
Contents IMPOR T ANT SAFETY INSTR UCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Quick Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Center pages Guide to the dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Bef ore ...
-
Miele NOVOTRONIC T 1576 - page 4
, W ARNING - T o r educe the risk of fire, electric shock, or injury to per - sons when using your appliance, fol - low basic precautions, including the following: Read all instructions before using the appliance. Do not dry ar ticles that have been previously cleaned, washed, soaked in, or spotted with gasoline, dry-cleaning solvents, or other fla ...
-
Miele NOVOTRONIC T 1576 - page 5
GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of malfunction or break - down, grounding will r educe the risk of electric shock by providing a path of least resistance for electric curr ent. This appliance is equipped with a cord hav - ing an equipment-grounding conductor and a grounding plug. The plug must be plugged into an ...
-
Miele NOVOTRONIC T 1576 - page 6
1 Power cord with plug 2 Control panel 3 Door 4 Exhaust connection (left or rear) 5 Four height adjustable screw feet Guide to the dryer 6 ...
-
Miele NOVOTRONIC T 1576 - page 7
Contr ol panel a "On/Off" b utton T urns the machine on and off or can- cels a program. If the dryer is tur ned on the drum interior will light when the door is opened. b "Door" b utton Opens the door or can be used to can- cel a program. c "ST AR T" b utton Begins the selected program. The indicator: – flashes when ...
-
Miele NOVOTRONIC T 1576 - page 8
The appliance must be correctly in - stalled and connected before the first use. Please see the "Installation instructions". ^ Check the dryer drum for any residue that may have deposited during the manufacturing process. If necessary clean out with a cloth. Before drying, check fabric care la - bels for special drying instructions. q = D ...
-
Miele NOVOTRONIC T 1576 - page 9
1. T urn on the dryer and load the laundry ^ Press the "On/Of f" button to tur n on the dryer . ^ Press the "Door" button to open the door . ^ Load the laundry loosely into the drum. ^ Close the door with a firm swing - do not push it shut. Do not use fabric softener sheets in this dryer . Silicates contained in these sheets cou ...
-
Miele NOVOTRONIC T 1576 - page 10
2. Select a pr ogram ^ T urn the program selector clockwise or counterclockwise to the desir ed program. Please refer to the "Pr ograms" char t. Using the dryer 10 ...
-
Miele NOVOTRONIC T 1576 - page 11
Program F abric Note CO TT ONS Extra dry For drying laundr y that will be stored away , such as linens or seasonal clothing. The "Extra dry" program should not be selected for jersey mate - rials. Items may shrink. Normal+ Uniform loads of cotton e.g. sheets, underwear , socks. - Normal Knitted cotton fabrics that may shrink, e.g. jersey ...
-
Miele NOVOTRONIC T 1576 - page 12
3. Select a drying option (if needed) ^ Select the option before starting a program by pr essing the respective button. Indicator light: on = dry option selected. off = dry option not selected. Some drying options are not available in all programs. The dryer will not allow you to choose an option that will conflict with the selected program. Low en ...
-
Miele NOVOTRONIC T 1576 - page 13
4. Start the program ^ Press the "ST ART" button. 5. At the end of a pr ogram The "Anti-crease/End" indicator will light at the end of a program. ^ T urn the program selector to "End". ^ Press the "Door" button to open the door . ^ Remove the laundry . ^ Check that the drum is empty . ^ Clean the lint filter ...
-
Miele NOVOTRONIC T 1576 - page 14
Changing a pr ogram Once a drying program has star ted, changes to the program and any se - lected drying options can only be made by cancelling the current pr ogram. T o cancel the current program: ^ T urn the program selector to "End". When the program has been canceled the "Anti-crease/End" indicator lights. ^ T urn the progr ...
-
Miele NOVOTRONIC T 1576 - page 15
Child safety loc k When activated, the safety lock pre - vents the dryer from being operated by locking the control panel functions. T o activate the c hild safety loc k 1. Close the door and tur n the pr ogram selector to "End". 2. T ur n on the dryer using the "On/Off" button. 3. Press and hold the "T urbo" button wh ...
-
Miele NOVOTRONIC T 1576 - page 16
Cleaning the lint filter The lint filter must be cleaned before or after every program. ^ Open the door and remove the lint fil- ter . ^ Wipe the lint off the filter with your hand (do not use any sharp objects!) ^ Any lint remaining in the hollow part of the door can be removed thr ough the gap at the bottom with a dust brush or vacuum. ^ Return t ...
-
Miele NOVOTRONIC T 1576 - page 17
Changing the light b ulb , W ARNING T o reduce the risk of electric shock, disconnect this appliance from the power supply by unplugging or trip - ping the circuit br eaker . ^ Unscrew the plastic bulb cover lo- cated inside the drum and above the door (see illustration.) ^ Replace the light bulb with a temper - ature pr oof bulb (par t # 02 150 90 ...
-
Miele NOVOTRONIC T 1576 - page 18
With the following guide, minor problems can be fixed without a service call. What if . . . P ossible fault Fix . . . the dryer fails to star t when turned on? If the "On" indicator is lit you may not have selected the program properly . Reselect the program in the correct sequence, see "Using the dryer". If the "On" i ...
-
Miele NOVOTRONIC T 1576 - page 19
Quic k Guide Remo v e this guide f or easy ref erence Please read all instructions, especially the "Important Safety Instructions", bef ore using the dryer . ...
-
Miele NOVOTRONIC T 1576 - page 20
1. T urn on the dryer and load the laundry . ^ Press the "On/Of f" button to tur n on the dryer . ^ Press the "Door" button to open the door . ^ Load the laundry into the drum. Make sure that ther e is enough space in the drum for clothes to tumble freely . T o prevent fabric damage, check that laundry will not be caught in the ...
-
Miele NOVOTRONIC T 1576 - page 21
3. Select a drying option (if needed) ^ Press the button of the drying option you would like to select. 4. Start the program ^ Press "ST ART". 5. At the end of a pr ogram The "Anti-crease / End" indicator will light. ^ T urn the program selector to "End". ^ Press "Door" and r emove the laundr y . ^ Clean the ...
-
Miele NOVOTRONIC T 1576 - page 22
Program F abric Note CO TT ONS Extra dry Multi-layer fabrics, mixed loads of sturdy cottons, e.g. jeans, towels. The "Extra dry" program should not be selected for jersey mate - rials. Items may shrink. Normal+ Uniform loads of cotton e.g. sheets, underwear , socks. - Normal Knitted cotton fabrics that may shrink, e.g. jersey material or ...
-
Miele NOVOTRONIC T 1576 - page 23
What if . . . P ossible fault Fix . . . the "Loc ked" indicator flashes after turning the dryer on? The child safety lock is activated. Deactivate the safety lock. See "Child safety lock". . . . the "Loc ked" indicator lights during drying? This is not a fault. It will go off after the pr o - gram has finished. . . . t ...
-
Miele NOVOTRONIC T 1576 - page 24
In the event of a problem which you cannot fix yourself, or to order spar e parts please contact: – Y our Miele Dealer or – The Miele T echnical Service Department USA 1-800-999-1360 techserv@mieleusa.com CDN 1-800-565-6435 service@miele.ca When contacting the T echnical Service Department, please quote the model and serial number of your appli ...
-
Miele NOVOTRONIC T 1576 - page 25
INST ALLA TION INSTR UCTIONS T o prevent accidents and machine damage read these instructions bef ore installation or use. ...
-
Miele NOVOTRONIC T 1576 - page 26
Contents IMPOR T ANT SAFETY INSTR UCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 INST ALLA TION INSTR UCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Disposal of the packing materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Disposal of an old appli ...
-
Miele NOVOTRONIC T 1576 - page 27
Installation, repair and mainte - nance work should be by a Miele authorized service technician. Work by unqualified persons could be danger - ous and could void the warranty . Before installation, disconnect the tumble dryer from the electrical supply by unplugging the power cord or tripping the circuit br eaker . GROUNDING INSTRUCTIONS This appli ...
-
Miele NOVOTRONIC T 1576 - page 28
Disposal of the pac king materials The cardboar d box and packing materi - als protect the appliance during ship - ping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of childr en. Dan - ger of suffocation! Please r ecycle. Disposal of an old ...
-
Miele NOVOTRONIC T 1576 - page 29
Level the dryer The dryer must be level to ensure safe and proper operation. Minor discr epan- cies do not, however , have an adverse effect on operation. ^ The machine can be leveled by tur n - ing the legs clockwise or counter - clockwise as necessary . An air flow gap of 3 / 8 " (10 mm) must be provided between the machine and the floor . T ...
-
Miele NOVOTRONIC T 1576 - page 30
For best drying results, avoid extra long ducting with too many bends or angles. Avoid ducting in tight corners. Use flexible metal pipe or rigid metal pipe for venting. Non-metallic flexible hose should not be used since it is a potential fire hazar d. The shorter the exhaust ductwork, the more ef ficient the dr yer will be. Ex - pelled air is slo ...
-
Miele NOVOTRONIC T 1576 - page 31
Calculate the effective duct length The overall duct length will deter mine the duct diameter . ^ Measure the actual duct length needed: 1. Establish the number of elbows or bends necessary , noting the type of bend, angle and radius involved (see, T able 1). 2. Add the additional duct length as specified in T able 1 to the actual duct length to ge ...
-
Miele NOVOTRONIC T 1576 - page 32
Flexible metal ducting has been used for the following example. Other duct types may requir e additional duct length (see T able 1.) Example: V ent connection left . . . . . . . 39" (1.0 m) Length (L) . . . . . . . . . . . . . . . 47" (1.2 m) Lower radius (R) . . . . . . . . . . 19" (0.5 m) Height (H) . . . . . . . . . . . . . . . 39 ...
-
Miele NOVOTRONIC T 1576 - page 33
W all vent duct 1. Louvred wall vent frame 2. W all vent duct 3. Adapter 4. Louvred wall vent 5. Flap 6. Screw Dryer top vie w: 1. W all pipe 2. Flexible foam gasket A flexible foam gasket must be used if the tumble dryer is directly connected to the wall vent. inch cm 4 1 / 4 " 10.8 4" 10 23 1 / 2 "6 0 28 1 / 2 " 72.5 INST ALLA ...
-
Miele NOVOTRONIC T 1576 - page 34
Example 1 Connection of the rigid metal pipe to the dryer (side view). 1. KA-pipe 2. Adapter Example 2 Height of vent adapter in a stacked in- stallation. Connect the ducting ^ Attach the ducting to the vent. ^ Move the dryer close to its final posi - tion. ^ Attach the ducting to the exhaust por t via the duct adapter , securing with duct tape or ...
-
Miele NOVOTRONIC T 1576 - page 35
T o change the exhaust connection from the rear of the mac hine to the left side of the machine ^ Remove the vent socket from the r ear exhaust port by inser ting a thin screwdriver into the slot by the r etain- ing clip. Press the clip gently up- wards and at the same time turn the connector counterclockwise. ^ Press the r etaining clip of the cap ...
-
Miele NOVOTRONIC T 1576 - page 36
Make the electrical connection GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of malfunction or break - down, grounding will r educe the risk of electric shock by providing a path of least resistance for electric cur - rent. This appliance is equipped with a cord having an equipment-gr ound - ing conductor and a grounding plug ...
-
Miele NOVOTRONIC T 1576 - page 37
33 ...
-
Miele NOVOTRONIC T 1576 - page 38
34 ...
-
Miele NOVOTRONIC T 1576 - page 39
35 ...
-
Miele NOVOTRONIC T 1576 - page 40
M.-N r . 05 686 571 / All rights r eserved/4503 These instructions printed on 100% unbleached, recycled paper ar e completely biodegradable. 02 ...
Haben Sie eine Frage bezüglich Miele NOVOTRONIC T 1576?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Miele NOVOTRONIC T 1576 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Miele NOVOTRONIC T 1576 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.