-
Asante Technologies FH100TX8 - page 1
FriendlyNet FH100TX8 and FH100TX16 8-Port and 16-port Fast Ethernet Hubs User’s Manual Asanté T echnologies, Inc. 821 Fox Lane San Jose, CA 95131 ...
-
Asante Technologies FH100TX8 - page 2
Copyright Notice Copyright 1997 by Asanté T echnologies, Inc. All rights reserved. No part of this manual, or any associated artwork, software, product design or design con- cept, may be copied, reproduced or stored, in whole or in part, in any form or by any means mechanical, elec- tronic, optical, photocopying, recording or otherwise, including ...
-
Asante Technologies FH100TX8 - page 3
Page i Table of Contents Introduction ............................................................................... 1-1 FriendlyNet FH100TX8 and FH100TX16 ............................................. 1-1 Network Reliability ....................................................................... 1-2 Features ...................................... ...
-
Asante Technologies FH100TX8 - page 4
Page 1-1 1 Introduction FriendlyNet FH100TX8 and FH100TX16 Thank you for purchasing the Asanté FriendlyNet FH100TX8 or the Friendly- Net FH100TX16 F ast Ethernet Hub. The FH100TX8 and FH100TX16 F ast Ether net Hubs are 100Base-TX multi- port repeaters designed for networ ks using Unshielded T wisted P air (UTP) Category 5 ca ble or Shielded T wist ...
-
Asante Technologies FH100TX8 - page 5
Introduction Page 1-2 Network Reliability T o ensure network r elia bility , each hub monitors their por ts for signal quality and automatically disconnects stations tr ansmitting excessiv e noise, reconnect- ing them when the problem is r esolved. The hubs automatically truncate data packets that exceed the maximum length for IEEE 802.3u, prev ent ...
-
Asante Technologies FH100TX8 - page 6
Page 2-1 2 Installation Installation of the FH100TX8 or FH100TX16 hub consists of the f ollowing steps: ❏ Plan your 100Base-TX netw ork. ❏ Review cabling and v olta ge r equirements. ❏ Connect your hub to netw ork devices. ❏ Mount the hub in an equipment rac k or prepare it for desktop placement. Planning 100Base-TX Networks 100Base-TX netw ...
-
Asante Technologies FH100TX8 - page 7
Installation Page 2-2 Figur e 2-1 Sample 100Base-TX netw ork la yout Cabling Requirements 100Base-TX requires data-g rade (Category 5) UTP (Unshielded T wisted Pair) cable. ▲ Important: Some installations hav e Category 5 ca bling but do not have w all outlets and/or wir ing closet punc h-down blocks that meet Categ or y 5 requirements. 100Base-T ...
-
Asante Technologies FH100TX8 - page 8
FriendlyNet Fast Ethernet Hub User’s Manual Page 2-3 Connecting Network Devices Befor e you connect the hub to other devices, review the f ollowing guidelines: ❏ Make sure the netw ork cable length is less than 100 meters . ❏ Use a straight-thr ough twisted pair cable to connect ports to networ k devices. ❏ When connecting two hubs together ...
-
Asante Technologies FH100TX8 - page 9
Installation Page 2-4 Hub to Hub Connection (Cascading Hubs) T o connect two hubs together , follow the instructions and diagram belo w . ▲ Important: When using the uplink port on a hub, that hub’ s last port (port #8 on the FH100TX8, port #16 on the FH100TX16) CANNO T be used. A FriendlyNet Fast Ether- net Hub’s uplink port and its last por ...
-
Asante Technologies FH100TX8 - page 10
FriendlyNet Fast Ethernet Hub User’s Manual Page 2-5 Multiple Hub and Station Configuration To connect two FriendlyNet Hubs and multiple Fast Ethernet network stations, follo w the guidelines and diagram below . ▲ Important: Y our Fast Ethernet networ k configuration must comply with the IEEE 802.3u standar d. ❏ The maximum number of 100Bas ...
-
Asante Technologies FH100TX8 - page 11
Installation Page 2-6 Mounting the FriendlyNet Hub The FriendlyNet F ast Ether net Hub can be mounted in a standard 19-inc h equipment rack or it can be pr epared for desktop placement. This section describes both mounting scenarios. Equipment Rack Placement T o mount the hub in an equipment rack: 1 Mount one rack-mounting br acket (provided) on ea ...
-
Asante Technologies FH100TX8 - page 12
Page 3-1 3 LED Indicators The FriendlyNet FH100TX8 and FH100TX16 eac h have LEDs that repr esent the follo wing: ❏ P ower ❏ P ar tition ❏ Link/Receive ❏ Utilization % Figur e 3-1 FriendlyNet FH100TX8 F ast Ethernet Hub LEDs Figur e 3-2 FriendlyNet FH100TX16 F ast Ethernet Hub LEDs ...
-
Asante Technologies FH100TX8 - page 13
LED Indicators Page 3-2 Power The gr een PWR (pow er) LED on the hub’ s front panel illuminates when the hub is turned on and receiving pow er . Partition The yellow P ar tition LEDs, associated with each port, illuminate if a por t has been partitioned. A port will automatically disconnect a segment if there are excessive collisions (two or mor ...
-
Asante Technologies FH100TX8 - page 14
Page A-1 A T roubleshooting Monitoring LEDs The follo wing table descr ibes how to troub leshoot problems with y our net- wor k and/or the hub by monitor ing the hub’ s LEDs. Problem Action Power LED is off ✔ Make sure the power adapter is connected to the power outlet and is properly inserted into the power connector on the hub. ✔ Determine ...
-
Asante Technologies FH100TX8 - page 15
Troubleshooting Page A-2 Problem Action Link/Receive LED is off ✔ Make sure the hub is powered on. ✔ Make sure the device on the other end is powered on. ✔ Make sure the proper cabling is used between the device and the hub (refer to the cable guidelines specified in Chapter 2). ✔ Make sure the correct cable is properly connected to the hu ...
-
Asante Technologies FH100TX8 - page 16
Page B-1 B T echnical Specifications FH100TX8 and FH100TX16 Fast Ethernet Hub Standards ❏ IEEE 803.3u 100Base-TX F ast Ether net Network Media ❏ 100Base-TX Unshielded T wisted-Pair cabling (Categ or y 5 UTP) Maximum Segment Lengths ❏ 100 meter hub-to-station connection ❏ 5 meter hub-to-hub connection Connectors ❏ 8 (FH100TX8) or 16 (FH10 ...
-
Asante Technologies FH100TX8 - page 17
Technical Specifications Page B-2 Environment ❏ T emperature ❏ Operating: 0 ° C to +40 ° C ❏ Storage: -20 ° C to +70 ° C ❏ Humidity ❏ Operating: 10% to 80% RH Standards Compliance ❏ FCC Class A ❏ CE Mark ...
-
Asante Technologies FH100TX8 - page 18
Page C-1 C T echnical Support Contacting T echnical Support T o contact Asanté T echnical Support: T elephone (800) 622-7464 Fax (408) 432-6018 Fax-Bac k (800) 741-8607 Internet Mail support@asante.com W orld Wide W eb Site http://www .asante.com Bulletin Board Service (BBS) (408) 432-1416 ARA BBS (guest log-in) (408) 894-0765 AppleLink Mail/BBS A ...
-
Asante Technologies FH100TX8 - page 19
ASANTÉ TECHNOLOGIES, INC., 821 FOX LANE, SAN JOSE, CA 95131 PHONE: 408.435.8388, 800.662.9686 • F AX: 408.432.7511 • e-mail address: sales@asante.com • W orld Wide W eb site: http://www .asante.com ©1997 Asanté T echnologies Inc., Asanté is a trademark of Asanté T echnologies, Inc. All brand names and prod- ucts are trademar ks or regist ...
Haben Sie eine Frage bezüglich Asante Technologies FH100TX8?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Asante Technologies FH100TX8 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Asante Technologies FH100TX8 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.