Bedienungsanleitung Patton electronic 4630 Series

59 Seiten 1.82 mb
Download

Zur Seite of 59

Summary
  • Patton electronic 4630 Series - page 1

    Smar tNode 4630 Series ISDN BRI S0 V oIP Gateway Router Getting Star ted Guide Sales Office: +1 (301) 975-1000 T echnical Support: +1 (301) 975-1007 E-mail: support@patton.com WWW : www .patton.com Document Number: 13221U1-001 Rev . D Part Number: 07MSN4630-GS Revised: July 20, 2006 Start Installation For Quick ...

  • Patton electronic 4630 Series - page 2

    Patton Electronics Company , Inc. 7622 Rickenbacker Drive Gaithersburg, MD 20879 USA T el: +1 (301) 975-1000 F ax: +1 (301) 869-9293 Support: +1 (301) 975-1007 W eb: www .patton.com E-mail: support@patton.com T rademark Statement The terms SmartN ode, SmartW ar e and SmartV iew are trademarks of P atton Electronics Company . All other trademarks pr ...

  • Patton electronic 4630 Series - page 3

    3 Summar y T able of Contents 1 General information ...................................................................................................................................... 13 2 Applications overview .................................................................................................................................... 19 ...

  • Patton electronic 4630 Series - page 4

    4 T able of Contents Summary Table of Contents ........................................................................................................................... 3 Table of Contents ........................................................................................................................................... 4 List of Figures . ...

  • Patton electronic 4630 Series - page 5

    5 SmartNode 4630 Getting Started Guide Table of Contents 2. Configuring the desired IP address ....................................................................................................................30 Factory-default IP settings ............................................................................................................ ...

  • Patton electronic 4630 Series - page 6

    6 SmartNode 4630 Getting Started Guide Table of Contents Physical .................................................................................................................................................................46 Identification of the SmartNode devices via SNMP ....................................................................... ...

  • Patton electronic 4630 Series - page 7

    7 List of Figures 1 SmartNode 4630 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 2 SN4630 rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 3 Smart ...

  • Patton electronic 4630 Series - page 8

    8 List of T ables 1 General conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2 Rear panel ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 3 S ...

  • Patton electronic 4630 Series - page 9

    9 About this guide This guide describes the S martNode 4630 har dware, installation and basic configuration. F or detailed software configuration information refer to the S martW ar e Software Configur ation Guide and the available Configura- tion N otes. Audience This guide is intended for the following users: • Operators • Installers • ...

  • Patton electronic 4630 Series - page 10

    10 SmartNode 4630 Getting Started Guide Precautions N otes, cautions, and warnings, which have the following meanings, ar e used throughout this guide to help you become aware of potential problems. W arnings are intended to prev ent safety hazards that could r esult in per- sonal injury . Cautions are intended to prev ent situations that could res ...

  • Patton electronic 4630 Series - page 11

    11 SmartNode 4630 Getting Started Guide General observations • Clean the case with a soft slightly moist anti-static cloth • Place the unit on a flat surface and ensure free air cir culation • A void exposing the unit to direct sunlight and other heat sources • P rotect the unit from moistur e, vapors, and corrosive liquids T ypographical ...

  • Patton electronic 4630 Series - page 12

    12 SmartNode 4630 Getting Started Guide Italicized Futura type V ariables for which you supply values are in italic font Futura type Indicates the names of fields or windows. Garamond bold type Indicates the names of command buttons that execute an action. < > Angle brackets indicate function and keyboard keys, such as <SHIFT>, <CTR ...

  • Patton electronic 4630 Series - page 13

    13 Chapter 1 General information Chapter contents SmartNode 4630 overview ....................................................................................................................................14 SmartNode 4630 rear panel ................................................................................................................... ...

  • Patton electronic 4630 Series - page 14

    SmartNode 4630 overview 14 SmartNode 4630 Getting Started Guide 1 • General information SmartNode 4630 over view The S martNode 4630 ISDN S0 V oIP Gateway-Router (see figure 1 ) combines IP r outing, VPN/S ecurity , and Quality of Service with high-quality V oice ov er IP (V oIP) delivered on fiv e ISDN S 0 (S/T) Basic Rate Interface (BRI). Thi ...

  • Patton electronic 4630 Series - page 15

    SmartNode 4630 overview 15 SmartNode 4630 Getting Started Guide 1 • General information SmartNode 4630 rear panel The S martNode 4630 is a compact V oIP Gateway Router that supports eight V oIP calls on five ISDN BRI ports (see figure 2 ). The SmartN ode 4630 rear panel ports are described in table 2 . Figure 2. SN4630 rear panel T able 2. Rear ...

  • Patton electronic 4630 Series - page 16

    SmartNode 4630 overview 16 SmartNode 4630 Getting Started Guide 1 • General information BRI 0/1 ISDN BRI NT/TE port, RJ-45 socket S0 (S/T) inter face (see figure 2 ), connects the SmartNode with an ISDN device over an S/T bus, e.g. a PBX or an NT . The inter- face may be used as fallback if connected to an NT . The por t can be switched between ...

  • Patton electronic 4630 Series - page 17

    SmartNode 4630 overview 17 SmartNode 4630 Getting Started Guide 1 • General information Figure 3. SmartNode 4630 front panel SmartNode 4630 front panel F igure 3 sho ws S martN ode 4630 LEDs, the LED definitions are listed in table 3 . T able 3. Smar tNode 4630 LED definitions LED Description Note If an error occurs, all LEDs will flash once p ...

  • Patton electronic 4630 Series - page 18

    SmartNode 4630 overview 18 SmartNode 4630 Getting Started Guide 1 • General information V oIP Link • On indicates the gateway is registered to an H.323 gatekeeper/SIP ser ver , or , in the case of direct routing, has at least one active V oIP connection. • Off indicates the unit is not configured or registered, or has no active direct- route ...

  • Patton electronic 4630 Series - page 19

    19 Chapter 2 Applications over view Chapter contents Introduction ..........................................................................................................................................................20 Application—Edge intelligence of enterprise communication ................................................................... ...

  • Patton electronic 4630 Series - page 20

    Introduction 20 SmartNode 4630 Getting Started Guide 2 • Applications overview Introduction P atton ’ s SmartN ode V oIP Media Gateway Routers deliv er the features you need for adv anced multiservice voice and data network applications. They combine high quality voice-ov er-IP with powerful quality of service routing functions to build profess ...

  • Patton electronic 4630 Series - page 21

    Application—Multi-service ISDN Internet telephony IAD 21 SmartNode 4630 Getting Started Guide 2 • Applications overview Ho w it works: 1. Connect the S martNode to the PSTN and legacy PBX, and configur e the call router to pass all calls from the PBX to the PSTN and vice versa. This first step will not affect any uses in the enterprise 2. Cho ...

  • Patton electronic 4630 Series - page 22

    Application—Multi-service ISDN Internet telephony IAD 22 SmartNode 4630 Getting Started Guide 2 • Applications overview ...

  • Patton electronic 4630 Series - page 23

    23 Chapter 3 Smar tNode installation Chapter contents Planning the installation ........................................................................................................................................23 Site log .......................................................................................................................... ...

  • Patton electronic 4630 Series - page 24

    Planning the installation 24 SmartNode 4630 Getting Started Guide 3 • SmartNode installation Planning the installation Before installing the gateway router device, the follo wing tasks should be completed: • Cr eate a network diagram (see section “N etwork information ” on page 24) • Gather IP r elated information (see section “IP relat ...

  • Patton electronic 4630 Series - page 25

    Installing the gateway router 25 SmartNode 4630 Getting Started Guide 3 • SmartNode installation • IP addresses of central H.323 gatekeeper (if used) • IP addresses and/or URL of SIP servers or Internet telephony services (if used) • Login and password for PPP oE Access • Login and password for SIP or H.323 based telephony services • IP ...

  • Patton electronic 4630 Series - page 26

    Installing the gateway router 26 SmartNode 4630 Getting Started Guide 3 • SmartNode installation Connect the cables in the following or der: 1. Connect the ISDN terminals and NT to the BRI ports (see section “Connecting ISDN terminals and NT to the S martNode ’ s ISDN BRI ports” ). 2. Connect the 10/100Base-T E thernet LAN and W AN (see sec ...

  • Patton electronic 4630 Series - page 27

    Installing the gateway router 27 SmartNode 4630 Getting Started Guide 3 • SmartNode installation Connecting the power supply Do the follo wing to connect the main power to the M odel 4630: Note Do not connect the pow er cord to the A C pow er outlet at this time. 1. Insert the female end of the AC po wer to the mains port (see figure 2 on page 1 ...

  • Patton electronic 4630 Series - page 28

    28 Chapter 4 Initial configuration Chapter contents Introduction ..........................................................................................................................................................32 1. Connecting the SmartNode to your laptop PC ................................................................................. ...

  • Patton electronic 4630 Series - page 29

    Introduction 29 SmartNode 4630 Getting Started Guide 4 • Initial configuration Introduction This chapter leads you through the basic steps to set up a new S martN ode and to download a configuration. Setting up a new S martN ode consists of the following main steps: Note If you haven ’ t already installed the S mar tN ode, refer to chapter 3, ...

  • Patton electronic 4630 Series - page 30

    2. Configuring the desired IP address 30 SmartNode 4630 Getting Started Guide 4 • Initial configuration S martNode will pr ovide the PC with an IP addr ess. Y ou can check the connection to the SmartN ode by exe- cuting the ping command from the PC command window as follo ws: ping 192.168.1.1 2. Configuring the desired IP address Factory-default ...

  • Patton electronic 4630 Series - page 31

    3. Connecting the SmartNode to the network 31 SmartNode 4630 Getting Started Guide 4 • Initial configuration N ow you can set y our IP address and network mask for the interface ETH 0/0 (W AN) . Within this example a network 172.16.1.0/24 address is assumed. The IP address in this example is set to 172.16.1.99 (you should set this the IP address ...

  • Patton electronic 4630 Series - page 32

    4. Loading the configuration (optional) 32 SmartNode 4630 Getting Started Guide 4 • Initial configuration Y ou can check the connection with the ping command from the SmartN ode to another host on the network. 172.16.1.99(if-ip)[eth0]#ping <IP Address of the host> Note If the W AN address is not set to DHCP , to ping a device outside your l ...

  • Patton electronic 4630 Series - page 33

    Bootloader 33 SmartNode 4630 Getting Started Guide 4 • Initial configuration 172.16.1.99(if-ip)[eth0]# reload Running configuration has been changed. Do you want to copy the 'running-config' to the 'startup-config'? Press 'yes' to store, 'no' to drop changes : no Press 'yes' to restart, 'no&a ...

  • Patton electronic 4630 Series - page 34

    Bootloader 34 SmartNode 4630 Getting Started Guide 4 • Initial configuration Note With the Bootloader , only the Ethernet interface 0/0 is available. The Boot- loader applies the IP address, subnet mask, and default gateway that were last configured by the Bootloader itself or by another application (e.g. S mart- W are). If an application confi ...

  • Patton electronic 4630 Series - page 35

    Bootloader 35 SmartNode 4630 Getting Started Guide 4 • Initial configuration Raw file loaded 0x01800100-0x0199ca6b, 1689964 bytes, assumed entry at 0x01800100 RedBoot> fis delete -n 1 Delete image 1 - continue (y/n)? y ... Erase from 0x60030000-0x601cc974: .......................... RedBoot> fis create Use address 0x01800100, size 1684402 ? ...

  • Patton electronic 4630 Series - page 36

    Additional information 36 SmartNode 4630 Getting Started Guide 4 • Initial configuration Note This type of download takes about 25 minutes since it uses a serial link at only 9600 bps. Additional information F or detailed information about configuring and operating guidance, set up procedures, and troubleshooting, refer to the S martN ode Series ...

  • Patton electronic 4630 Series - page 37

    37 Chapter 5 Contacting Patton for assistance Chapter contents Introduction ..........................................................................................................................................................34 Contact information ................................................................................................. ...

  • Patton electronic 4630 Series - page 38

    Introduction 38 SmartNode 4630 Getting Started Guide 5 • Contacting Patton for assistance Introduction This chapter contains the following information: • “Contact information ” —describes how to contact P atton technical support for assistance. • “W arranty Service and Returned Mer chandise Authorizations (RMAs)” —contains informa ...

  • Patton electronic 4630 Series - page 39

    Warranty Service and Returned Merchandise Authorizations (RMAs) 39 SmartNode 4630 Getting Started Guide 5 • Contacting Patton for assistance Out-of-warranty ser vice P atton ser vices what we sell, no matter how you acquir ed it, including malfunctioning products that are no longer under warranty . Our products have a flat fee for r epairs. U ni ...

  • Patton electronic 4630 Series - page 40

    40 Appendix A Compliance information Chapter contents Compliance ...........................................................................................................................................................37 EMC ........................................................................................................................... ...

  • Patton electronic 4630 Series - page 41

    Compliance 41 SmartNode 4630 Getting Started Guide A • Compliance information Compliance EMC • FCC P ar t 15, Class A • EN55022, Class A • EN55024 Safety • UL 60950-1/CSA C22.2 N0. 60950-1 • IEC/EN60950-1 • AS/NZS 60950-1 PSTN Regulatory • TBR3 • AS/ACIF S031 Radio and TV Inter ference The S martNode r outer generates and uses rad ...

  • Patton electronic 4630 Series - page 42

    ISDN compliance 42 SmartNode 4630 Getting Started Guide A • Compliance information ISDN compliance The device is approv ed for connection to the public ISDN telecommunication network. When this device is used in North America, it shall be connected to a Network T er mination Device and not connected directly to an outside POTS line. CAUTION ...

  • Patton electronic 4630 Series - page 43

    43 Appendix B Specifications Chapter contents DSP .......................................................................................................................................................................44 Voice connectivity .............................................................................................................. ...

  • Patton electronic 4630 Series - page 44

    DSP 44 SmartNode 4630 Getting Started Guide B • Specifications Note Refer to the software featur e matrix for the most up-to-date specifications. DSP One or two 4-channel DSP V oice connectivity 3 or 5 ISDN BRI S0 (S/T), 4-wire RJ45 ports NT/TE configurable per port P oint-to-point, point-to-multipoint configurable Life-line bypass relay betwe ...

  • Patton electronic 4630 Series - page 45

    Fax and modem support 45 SmartNode 4630 Getting Started Guide B • Specifications Fax and modem support Automatic fax and modem detection Codec fallback for modem-bypass T .38 F ax-Relay (G r . 3 F ax, 9.6 k, 14.4 k) G.711 F ax-Bypass V oice signalling SIPv2 H.323v4 MGCP/IUA SIP call transfer , redirect Overlap or en-bloc dialing DTMF in-band, out ...

  • Patton electronic 4630 Series - page 46

    IP services 46 SmartNode 4630 Getting Started Guide B • Specifications IP services IPv4 router; RIPv1, v2 (RFC 1058 and 2453) P rogrammable static routes ICMP redirect (RFC 792); P acket fragmentation DiffS erve/T oS set or queue per header bits P ocket P olicing discards excess traffic 802.1p VLAN tagging IPSEC AH & ESP M odes Manual Key; I ...

  • Patton electronic 4630 Series - page 47

    Identification of the SmartNode devices via SNMP 47 SmartNode 4630 Getting Started Guide B • Specifications Operating humidity: up to 90%, non condensing Identification of the SmartNode devices via SNMP All S martNode devices hav e assigned sysObjectID (.iso.org.dod.internet.mgmt.mib-2.system.sysO bjectID) numbers (see table 6 ). Accor ding to t ...

  • Patton electronic 4630 Series - page 48

    48 Appendix C Cabling Chapter contents Introduction ..........................................................................................................................................................44 Console ..................................................................................................................................... ...

  • Patton electronic 4630 Series - page 49

    Introduction 49 SmartNode 4630 Getting Started Guide C • Cabling Introduction This section provides information on the cables used to connect the S martNode and the interface cards to the existing network infrastructure and to third party products. Console The S martNode can be connected to a serial terminal o ver its serial console por t, as dep ...

  • Patton electronic 4630 Series - page 50

    Ethernet 50 SmartNode 4630 Getting Started Guide C • Cabling Ethernet Ethernet devices (10B ase-T/100Base-T) are connected to the S mar tN ode ov er a cable with RJ-45 plugs. All Ethernet ports on the SN4630 are A uto-MDX use any straight or crossover cable to connect to hubs, switches, PCs or other devices. Figure 10. T ypical Ethernet straight- ...

  • Patton electronic 4630 Series - page 51

    ISDN BRI 51 SmartNode 4630 Getting Started Guide C • Cabling ISDN BRI The ISDN ports are connected to ISDN terminals (Phones PBXs) or an ISDN NT using cables terminated with RJ-45 connectors. U se straight-though cables to connect to the S/T port of your NT or phones/PBX. Figure 11. Connecting an ISDN device The interconnecting cables shall be ac ...

  • Patton electronic 4630 Series - page 52

    52 Appendix D Por t pin-outs Chapter contents Introduction ..........................................................................................................................................................48 Console port ......................................................................................................................... ...

  • Patton electronic 4630 Series - page 53

    Introduction 53 SmartNode 4630 Getting Started Guide D • Port pin-outs Introduction This section provides pin-out information for the ports of the S mar tN ode. Console port Configuration settings: 9600 bps, 8 bits, no parity , 1 stop bit, no flow control Figure 12. EIA-561 (RJ-45 8-pin) port Note N/C means no internal electrical connection. Et ...

  • Patton electronic 4630 Series - page 54

    ISDN BRI 0/1 .. 0/3 (TE/Usr or NT/Net) 54 SmartNode 4630 Getting Started Guide D • Port pin-outs Note Pins not listed are not used. Note All pins between the port BRI 0/0 and the por t BRI 0/1 are connected during power failur e. F allback relay operation: • When the unit is not power ed, the fallback relay connects pins 3, 4, 5, and 6 of the n ...

  • Patton electronic 4630 Series - page 55

    55 Appendix E Smar tNode 4630 factor y configuration Chapter contents Introduction ..........................................................................................................................................................51 ...

  • Patton electronic 4630 Series - page 56

    Introduction 56 SmartNode 4630 Getting Started Guide E • SmartNode 4630 factory configuration Introduction The factory configuration settings for SmartN ode 4630 are as follo ws: #----------------------------------------------------------------# # # # 4110/4520/4630 Series # # R3.xx BUILDxxxxx # # 2005-01-18T00:00:00 # # Factory configuration fi ...

  • Patton electronic 4630 Series - page 57

    57 Appendix F End user license agreement Chapter contents End User License Agreement .................................................................................................................................53 1. Definitions ...................................................................................................................... ...

  • Patton electronic 4630 Series - page 58

    End User License Agreement 58 SmartNode 4630 Getting Started Guide F • End user license agreement End User License Agreement By opening this package, operating the D esignated Equipment or downloading the P rogram(s) electronically , the End U ser agrees to the following conditions: 1. Definitions A) Effectiv e Date shall mean the earliest date ...

  • Patton electronic 4630 Series - page 59

    End User License Agreement 59 SmartNode 4630 Getting Started Guide F • End user license agreement If the P rogram(s) are acquired by or on behalf of a unit or agency of the U nited States Go vernment, the Gov- ernment agrees that such P rogram(s) are commercial computer software or computer software documentation and that, absent a written agreem ...

Produzent Patton electronic Kategorie Network Router

Dokumente, die wir vom Produzenten des Geräts Patton electronic 4630 Series erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Patton electronic
- Bedienungsanleitungen 4630 Series
- Produktkarten Patton electronic
- Informationsbroschüren
- oder Energieetiketten Patton electronic 4630 Series
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Patton electronic 4630 Series.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Patton electronic 4630 Series, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Patton electronic 4630 Series. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Patton electronic 4630 Series ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Patton electronic 4630 Series, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Patton electronic 4630 Series hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Patton electronic 4630 Series verständlich ist.

Eine gänzliche Bedienungsanleitung von Patton electronic sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Patton electronic 4630 Series bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Patton electronic 4630 Series befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Patton electronic 4630 Series, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Patton electronic 4630 Series - die uns die ersten Schritte während der Nutzung von Patton electronic 4630 Series erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Patton electronic 4630 Series hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Patton electronic 4630 Series im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Patton electronic 4630 Series?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Patton electronic 4630 Series nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Patton electronic 4630 Series hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)