-
JVC LYT2232-002A - page 1
WR-MG270 Marine Case INSTR UCTIONS Unterwassergehäuse BEDIENUNGSANLEITUNG Boîtier sous-marin MANUEL D’UTILISA TION Onderwaterhuis GEBR UIKSAANWIJZING Car casa submarina MANU AL DE INSTRUCCIONES Custodia subacquea ISTRUZIONI Бокс для по дво дной съемки ИНСТРУКЦИЯ ПО ЭК СПЛУ А Т АЦИИ Obudow a podw odn ...
-
JVC LYT2232-002A - page 2
12 In order to use this product safely Preparation ( A Pg. 16) • Check that there is no dirt, cracks, or damage to the O-ring. • Always apply grease to the O-ring. Attaching the Marine Case to the Camera ( A Pg. 17, 18) • Attach the power button cap depending on the camera used. • Make sure that the O-ring is not twisted, and that you do no ...
-
JVC LYT2232-002A - page 3
13 3. Check that there are no scratches or cracks on the marine case every time you use it. The marine case must withstand water pressure with use. Repeated exposure to pressure eventually lead s to material fatigue, which may result in damage of the marine case. Every time you use the marine case, check in advance that there are no scratches or cr ...
-
JVC LYT2232-002A - page 4
14 Procedures for Using the Supplied Mainten ance Kit Drying agent Prevents fogging inside the marine case. Insert it at the back of the base attached to the camera. ¹ The moisture absorption ability of drying agent that has previously been used may deteriorate depending on the conditions of use. As such, we recommend that the drying agent be repl ...
-
JVC LYT2232-002A - page 5
15 Silicone c loth Wash the marine case with fresh water, and wipe the outer side of the whole case with the silicone cloth after drying. Buckle Hexagonal wren ch (small) (Buckle opener) For use when you have difficulty opening the buckle. Hook the wrench to the buckle and pull towards you. Grip belt of camera Base Screw tightening key Use the key ...
-
JVC LYT2232-002A - page 6
16 1. Main casing grip Attach the strap provided as shown in th e diagram above. 2. Z oom lever Zoom (tele/wide) while shooting. 3. Rin g Commercially available filters (67 mm diameter) can be attached. 4. Bu ckle (3 locations) Seal the marine case. 5. Grip attach ment holes You can attach the grip provided, or commercially available weights. 6. St ...
-
JVC LYT2232-002A - page 7
17 A Setup the camera. z For models equipped with light, turn off the light. z Open the lens cover. z Set to the shooting mode (video/still image). ¹ Even when the shooting mode is set to “video”, still images can be captured by pressing the still image lever during video recording. z It is recommended to set to the auto shooting mode. z Inser ...
-
JVC LYT2232-002A - page 8
18 I Seal the marine case. z Make sure that the O-ring is not twisted, and that you did not forget to attach it. z Make sure that foreign objects (strap, belt, dirt, etc.) have not been caught in bet ween. z The risk of water leakage is extremely high if the O-ring is twisted, if you forget to attach it, or if something is trapped in the seal. J Ch ...
-
JVC LYT2232-002A - page 9
19 B Press the vi deo recording start/s top button or the still image lever to start recording. C When you have finished record ing, press and hold the powe r button for more than 2 seconds to turn off the camera. z The camera’s power lamp goes out and the monitor turns off. If there is a need to detach immediately: A Submerge the marine case in ...
-
JVC LYT2232-002A - page 10
20 Always perform maintenance on the marine case after you have finished recording. Salt crystal or dirt will ac cumulate inside the marine case if maintenance is not performed, and this can cause water leakage. z Do this within 30 minutes a fter diving. z Pour in fresh water until the marine case is completely submerged in the containe r, and shak ...
-
JVC LYT2232-002A - page 11
21 z The front glass will fog if it is dirty. H Let it dry completely in a shaded area. z Do not leave the marine case in direct sunlight. z Doing so may cause discoloration of the case, and may cause the O-ring to deteriorate more quickly. z The conditions may vary depending on the environment of use such as temperature, humidity, water temperatur ...
-
JVC LYT2232-002A - page 12
WR-MG270 Marine Case INSTR UCTIONS Unterwasser gehäuse BEDIENUNGSANLEITUNG Boîtier so us-mar in MANUEL D’UTILISA T ION Onderwaterhuis GEBR UIKSAANWIJZING Car casa submarina MANU AL DE INSTRUCCIO NES Custodia subacquea ISTRUZIONI Бокс для по дво дной съемки ИНСТРУКЦИЯ ПО ЭК СПЛУ А Т АЦИИ Obudow a pod ...
-
JVC LYT2232-002A - page 13
ENGLISH DEUTSCH FRANÇAIS NEDERLANDS CASTE.ESP . IT ALIANO РУССКИЙ POLSKI O-ring Maintenance Manual O-Ring-W art ungshandb uch Manuel d’entretien du joint d’étanchéité Onderhoudshandleiding v oor de O-ring Manual de mantenimiento de la junta tórica Manuale di manutenzione dell’anello cir colare Рук ово дство по ух о ...
-
JVC LYT2232-002A - page 14
● O-ring is a type of seal used to make underwater cameras, strobes and ot her diving instruments, waterproof. It looks like a big, thick rubber band. ● The O-ring is an important component that protec ts the camera from water by keep ing the marine case airtight. ● As a general rule, ea ch time before using ( S a l t c r y s t a l s a r e f ...
-
JVC LYT2232-002A - page 15
● Check for hair, dirt, sand, salt, dust , and other foreign matte r ¹ Even small f oreign matter can cause water leakage. ● Check for foreign matter that are not visible by rubbing gently wit h your fingers ¹ Be sure to remo ve all f oreign matter. ● Wipe off any residu al grease Wipe off gently wi th a soft cloth or tissue paper. ¹ After ...
-
JVC LYT2232-002A - page 16
● Apply silicone grease on the O-ring The O-ring nee ds to be re-greased when its surf ace appears dr y . Be sure to remove the O-ring and apply the silicone grease on it. A Squeeze about 1 cm onto your finger B Apply it on the O-ring by holding the O-ring with your fingers . If the amount applied is not enough, repeat the above step . ¹ Make su ...
-
JVC LYT2232-002A - page 17
● Insert the O-ri ng after inspection Make sure no f oreign matter is adhered when placing the greased O-ring back to the groove. Do not pull too strongly , and make sure the O-ring is placed ev enly and not twisted. <POINT> Inser t from the four diagonal cor ners and smooth o ut ev enly . ● If you do not intend to use the marin e case fo ...
-
JVC LYT2232-002A - page 18
O-ring Maintenance Manual O-Ring-W ar tungshandbuc h Manuel d’entretien du joint d’étanchéité Onderhoudshandleiding v oor de O-ring Manual de mantenimiento de la junta tórica Manuale di manutenzione dell’anello cir colare Рук ово дс тво по ух оду за уплотнительным к о льцом Instr ukcja k onser w ac ...
Haben Sie eine Frage bezüglich JVC LYT2232-002A?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit JVC LYT2232-002A nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit JVC LYT2232-002A hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.