Deutsch dropdown-ico

Bedienungsanleitung Servis-Rhino Flex-Wing Rotary Cutter/Shredder

88 Seiten 3.94 mb
Download

Zur Seite of 88

Summary
  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 1

    SR15/SR10 MASTER P AR TS BOOK S/N 10001 T O 1 1270 P AR TS LISTING Rhino An Alamo Gr oup Company 1020 S. Sangamon A ve. Gibson City , Il 60936 1-800-446-5158 Email: parts@servis-rhino.com © 2006 Alamo Group Inc. FLEX-WING ROT AR Y CUTTER/SHREDDER ® Revision 04-06 P/N 00764578MB ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 2

    TO THE OWNER/OPERA T OR/DEALER All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the c ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 3

    P ARTS SECTION Parts Section – 1 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 4

    Parts Section – 2 ©2006 Alamo Group Inc. For maximum safety and to guarantee optimum product reliability, always use genuine Servis-Rhino Parts. The use of inferior replacement parts may cause premature or catastrophic failure which could result in serious injury or death. Direct any questions regarding parts to: The following instructions are o ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 5

    PART NAME INDEX AXLE ASSEMBLY SN 10001 - 11270 APR 1988 - SEPT 1990 ............................................................................................ 5 BLADE PAN ASSEMBLY - CENTER SN 10001 - 11270 APR 1988 - SEPT 1990 .............................................................. 6 BLADE PAN ASSEMBLY - WING SN 10001 - 11270 APR 1988 - SE ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 6

    PART NAME INDEX WEIGHT BOX SN 10001 - 11270 APR 1988 - SEPT 1990 ................................................................................................ 79 WHEEL HUB ASSEMBLY SN 10001 - 11270 APR 1988 - SEPT 1990 ............................................................................. 80 WINCH & HOLD DOWN STRAP SN 10001 - 11270 AP ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 7

    AXLE ASSEMBLY SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 00756981 1 CENTER AXLE ASSY SINGLE 00756976 1 CENTER AXLE ASSY DUAL 2 00756978 1 RIGHT AXLE ASSY 3 00756977 1 LEFT AXLE ASSY 4 00756686 1 WLDMT, CENTER AXLE * 5 00756975 1 OUTBOARD AXLE WLDMT RIGHT 6 00756694 1 OUTBOARD AXLE WLDMT LEFT 7 20BH5012 4 PIN-SPIRAL 5/16 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 8

    BLADE PAN ASSEMBLY - CENTER SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 00756698 1 WLDMT, CTR SECTION BLADE PAN 2 0582010330 2 BLADE, CCW FAN 582013 2 BLADE, CCW/CW FLAT 3 571044 4 BOLT SHOULDER 4 0656150200 2 ORDER 70 MIN HT WASHER 5 571045 2 WASHER 6 5GL16140 2 LOCKNUT 1 -14 LH TLN PL NOTE: Center Blades CCW Rotation SR ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 9

    BLADE PAN ASSEMBLY - WING SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 00756699 1 WLDMT, WING BLADE PAN 2 0652010330 2 BLADE, CW FAN 0622010330 2 BLADE, CCW FAN 0652010030 4 BLADE, CCW/CW FLAT 3 571044 4 BOLT SHOULDER 4 0656150200 2 ORDER 70 MIN HT WASHER 5 571045 2 WASHER 6 5GL16140 2 LOCKNUT 1 -14 LH TLN PL SR15/SR10 Mas ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 10

    CHAIN GUARD ASSEMBLY - FRONT CENTER SECTION SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 00756985 - CENTER SECTION - FRONT 1 02030700 3 HHCS 1/2-13UNC 1-1/4 PL5 2 00002700 3 FLATWASHER 1/2 PL STD 3 00001800 3 LOCKNUT TLM 1/2 NC PLB -------------- --------------------------------------------- 00756989 - CENTER SECTION RH FRON ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 11

    CHAIN GUARD ASSEMBLY - FRONT WING SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 00756986 - WING CHAIN GUARD ASSY 1 00756688 1 WING CHAINGUARD BAR 2 00751126 64 CHAIN 5/16 WLD 6 LINK 3 0652100202 1 ROD CHAIN 4 02030700 7 HHCS 1/2-13UNC 1-1/4 PL5 5 00002700 7 FLATWASHER 1/2 PL STD 6 00001800 7 LOCKNUT TLM 1/2 NC PLB SR15/SR10 M ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 12

    CHAIN GUARD ASSEMBLY - REAR CENTER SECTION SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 00756988 - CENTER SECTION-REAR CHAINGUARD 1 00756892 1 CENTER SECTION CHAINGUARD BAR 2 00755090 54 CHAIN 5/16- 5 LINKS WLD 3 00757142 1 ROD, CENTER SECT. REAR C.G. 4 00002500 8 SHCS 3/8 NC 1-1/4 PL5 5 00011100 8 FLATWASHER 3/8 PL STD 6 00 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 13

    CHAIN GUARD ASSEMBLY - REAR LEFT WING SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 0652110300 1 LEFT REAR WING CHN GD 2 0652110310 1 MOUNTING BRKT, LEFT 3 00751126 110 CHAIN 5/16 WLD 6 LINK 4 0652110201 2 ROD CHAIN 5 00013300 2 HEXB 1/2 NC 2 PL5 6 00002700 10 FLATWASHER 1/2 PL STD 7 00001800 10 LOCKNUT TLM 1/2 NC PLB 8 007 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 14

    CHAIN GUARD ASSEMBLY - REAR RIGHT WING SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 0652110200 1 RT REAR CHN GD ASSY 2 0652110210 1 MOUNTING BRKT, RIGHT 3 00751126 110 CHAIN 5/16 WLD 6 LINK 4 0652110201 2 ROD CHAIN 5 00013300 2 HEXB 1/2 NC 2 PL5 6 00002700 10 FLATWASHER 1/2 PL STD 7 00001800 10 LOCKNUT TLM 1/2 NC PLB 8 007 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 15

    CYLINDER ASSEMBLY - CENTER SECTION LIFT SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 8727 - HYDRAULIC CYLINDER, T 1 B651302 1 HOSE #6 - 8MP - 8MP - 180LG 2 94514 1 ADAPTER, HYD, ELBOW SWIVEL 3 7329 1 ADAPTER, HYD, STGHT RESTRICTOR 4 8755 1 CAP (HYD. CYLINDER) 5 8751 1 PISTON 6 8753 1 PISTON ROD 7 8752 1 TUBE (HYD. CYLINDER) ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 16

    CYLINDER ASSEMBLY - LEVEL LIFT LEFT WING 2-1/2 x 8 SLAVE SN 10001 - 10526 APR 1988 - MAR 1 ITEM PART NO. QTY. DESCRIPTION 0652141500 - CLY, LEVEL LIFT 1 0652141506 1 CLEVIS,BASE 2 0652141502 1 BARREL 3 0652141503 1 GLAND 4 0652140305 4 TIEROD,HYD CYL W/NUT 5 0652141404 1 PISTON 6 0652141501 1 ROD 7 0652140307 1 CLEVIS, ROD 8 0652141540 1 SEAL KIT 9 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 17

    CYLINDER ASSEMBLY - LEVEL LIFT RIGHT WING 2-3/4 x 8 SLAVE SN 10001 - 10526 APR 1988 - MAR ITEM PART NO. QTY. DESCRIPTION 0652141400 - HYD CYL KIT 1 0652141406 1 CLEVIS,BASE 2 0652141402 1 TUBE HYD CYL 3 0652141403 1 GLAND,ROD END 4 0652140305 4 TIEROD,HYD CYL W/NUT 5 0652141404 1 PISTON 6 0652141401 1 ROD,PISTON 7 0652140307 1 CLEVIS, ROD 8 0652141 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 18

    CYLINDER ASSEMBLY - LEVEL LIFT CENTER SECTION 3 x 8 SLAVE SN 10001 - 10526 APR 1988 - MAR ITEM PART NO. QTY. DESCRIPTION 0652141300 - HYD CYL KIT 1 0652141306 1 BUTT 2 0652141302 1 BARREL 3 0652141303 1 GLAND 4 0652140305 4 TIEROD,HYD CYL W/NUT 5 0652141304 1 PISTON 6 0652141301 1 ROD 7 0652140307 1 CLEVIS, ROD 8 0652141340 1 SEAL KIT 9 691356 2 PI ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 19

    CYLINDER ASSEMBLY - LEVEL LIFT LEFT WING 3 x 8 SLAVE SN 10527 - 11270 MAR 1989 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 8721 - CYL HYD LEVEL LIFT 3 DIA 1 8784 1 CAP (HYD. CYLINDER) 2 4675M 1 NUT PISTON 3 8780 1 PISTON 4 8781 1 TUBE 5 8753 1 PISTON ROD 6 8754 1 CLEVIS,OUTER 7 8785 4 TIE ROD 8 4376 8 NUT HEX 1/2-20 NF PL 9 8786 1 HEAD 10 8766 1 SEA ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 20

    CYLINDER ASSEMBLY - LEVEL LIFT CENTER SECTION 3-1/2 x 8 SLAVE SN 10527 - 11270 MAR 1989 - ITEM PART NO. QTY. DESCRIPTION 8719 - HYDRAULIC CYLINDER 1 8772 1 CAP 2 4705M 1 NUT PISTON 3 8768 1 PISTON 4 8769 1 TUBE 5 4706 1 PISTON ROD 6 8754 1 CLEVIS,OUTER 7 8773 4 TIE ROD 8 4689 8 NUT HEX 9/16-18NF PL 9 8774 1 HEAD 10 8764 1 SEAL KIT 11 8354 2 PIN-HYD ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 21

    CYLINDER ASSEMBLY - LEVEL LIFT RIGHT WING 3-1/4 x 8 SLAVE SN 10527 - 11270 MAR 1989 - SEPT ITEM PART NO. QTY. DESCRIPTION 8720 - HYDRAULIC CYLINDER 1 8778 1 CAP 2 4705M 1 NUT PISTON 3 8775 1 PISTON 4 8776 1 TUBE 5 4706 1 PISTON ROD 6 8754 1 CLEVIS,OUTER 7 8773 4 TIE ROD 8 4689 8 NUT HEX 9/16-18NF PL 9 8779 1 HEAD 10 8765 1 SEAL KIT 11 8354 2 PIN-HY ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 22

    CYLINDER ASSEMBLY - WING SECTION LIFT SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 8728 - HYDRAULIC CYLINDER 1 00756496 1 HOSE-#4-6MP-6MP-216LG 2 94517 1 ADAPTER, HYD, ELBOW SWIVEL 3 7329 1 ADAPTER, HYD, STGHT RESTRICTOR 4 94507 1 ADAPTER, HYD, REDUCER 5 8755 1 CAP (HYD. CYLINDER) 6 8751 1 PISTON 7 8759 1 PISTON ROD 8 8758 1 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 23

    DEFLECTOR - REAR LEFT AND RIGHT WING SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 00756876 2 WING REAR COVER 2 00002700 10 FLATWASHER 1/2 PL STD 3 00001800 10 LOCKNUT TLM 1/2 NC PLB 4 02030700 4 HHCS 1/2-13UNC 1-1/4 PL5 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 21 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 24

    DEFLECTOR - RUBBER CENTER SECTION REAR SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 00756993 - REAR RUBBER SHIELD KIT 1 00756877 1 REAR FLAP-CENTER SECTION 2 00756875 1 FLAP HOLD DOWN BAR 4 63066100 11 HHCS 3/8NCX1-1/2 5 63065400 11 FLATWASHER 3/8 PL HEAVY 6 00015800 11 NUT,TOPLOCK 3/8NC PLB SR15/SR10 Master Parts Book (Jun- ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 25

    DEFLECTOR - RUBBER FRONT CENTER SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 00758261 1 BAND RUBBER GD SR15 FRT CTR 2 00758263 1 PANEL RUBBER GD SR15 FRT CTR 3 02030700 3 HHCS 1/2-13UNC 1-1/4 PL5 4 00001800 3 LOCKNUT TLM 1/2 NC PLB SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 23 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 26

    DEFLECTOR - RUBBER FRONT WING SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 00758264 1 PANEL RUBBER GD SR15 WING 2 00758259 1 BAND RUBBER GD SR15 FRT WG 3 02030700 7 HHCS 1/2-13UNC 1-1/4 PL5 4 00001800 7 LOCKNUT TLM 1/2 NC PLB SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 24 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 27

    DEFLECTOR - RUBBER LH RH CENTER SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 00758262 1 PANEL RUBBER GD SR15 L&R CTR 2 00758260 1 BAND, RUBBER GD SR15 LH & RH 3 02030700 2 HHCS 1/2-13UNC 1-1/4 PL5 4 00001800 2 LOCKNUT TLM 1/2 NC PLB SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Sectio ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 28

    DRIVELINE ASSEMBLY - CAT 4 WING SN 10001 - 11209 APR 1988 - MAR 1990 ITEM PART NO. QTY. DESCRIPTION 00756583 - DRIVESHAFT, WING 1 00757051 1 YOKE 1-3/4-20 #6 SLIDE COLLAR 2 00757052 1 KIT-SLIDE COLLAR REPAIR 3 00752896 2 CROSS BEARING SERIES 6 4 00754335 1 GREASE FITTING FOR TUBE 5 00755610 2 GREASE FTG.ELBOW 8MMP1.0 90 6 00775330 1 DRIVELINE IMPLE ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 29

    DRIVELINE ASSEMBLY - CAT 4 WING SN 11210 - 11270 APR 1988 - MAR 1990 ITEM PART NO. QTY. DESCRIPTION 00759213 - DRIVELINE 1 00757051 1 YOKE 1-3/4-20 #6 SLIDE COLLAR 2 00757052 1 KIT-SLIDE COLLAR REPAIR 3 00752896 2 CROSS BEARING SERIES 6 4 00754335 1 GREASE FITTING FOR TUBE 5 00755610 2 GREASE FTG.ELBOW 8MMP1.0 90 6 00775330 1 DRIVELINE IMPLEMENT HA ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 30

    DRIVELINE ASSEMBLY - CAT 5 WING SN 10001 - 10979 APR 1988 - MAR 1990 ITEM PART NO. QTY. DESCRIPTION 00756582 - DRIVELINE,WING SERIES 80 W/SPL 1 00753908 1 YOKE, SERIES 8 1-3/4-20 SPLIN 2 00757052 1 KIT-SLIDE COLLAR REPAIR 3 00753068 2 CROSS BEARING SERIES 8 4 00754335 1 GREASE FITTING FOR TUBE 5 00755610 2 GREASE FTG.ELBOW 8MMP1.0 90 6 00756539 1 H ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 31

    DRIVELINE ASSEMBLY - CAT 5 WING SN 10980 - 11270 MAR 1990 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 00757375 - DRIVELINE 44R W/1-3/4X20 1 00753908 1 YOKE, SERIES 8 1-3/4-20 SPLIN 2 00757052 1 KIT-SLIDE COLLAR REPAIR 3 00753068 2 CROSS BEARING SERIES 8 4 00754335 1 GREASE FITTING FOR TUBE 5 00755610 2 GREASE FTG.ELBOW 8MMP1.0 90 6 00757376 1 PTO OU ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 32

    DRIVELINE ASSEMBLY - INTERMEDIATE SN 10001 - 11270 APR 1988 - SPET 1990 ITEM PART NO. QTY. DESCRIPTION 00756581 - DRIVESHAFT,INTERMEDIATE 1 00757049 1 OUTER YOKE 1-3/4-20 2 00752896 2 CROSS BEARING SERIES 6 3 00754399 1 FLANGED DOUBLE YOKE * 4 00756075 1 CLUTCH & YOKE SERIES 6 5 00755610 2 GREASE FTG.ELBOW 8MMP1.0 90 * This Flange Assembly has ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 33

    DRIVELINE ASSEMBLY - MAIN 44R 540/1000 RPM SN 10001 - 11270 APR 1988 - 1990 ITEM PART NO. QTY. DESCRIPTION 1 00758814 1 D/L 44R SQ SHFT 29PAINT BLACK 2 W827A 1 YOKE,CLP,1-3/4-20SP PAINT BLK 3 W840 2 CROSS REPR KIT 4 00758815 1 DRIVELINE SHAFT & YOKE 44R 29 5 00758816 1 SHIELD OUTHE 29-1/8 LG 44R 6 00759212 4 RETAINER, NYLON BEARING 7 W802B 1 HS ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 34

    DRIVELINE ASSEMBLY - MAIN CV 1000 RPM SN 10001 - 11000 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 00755751 - CV DRIVELINE,1000,1-3/8-21YOKE 1 00753908 1 YOKE, SERIES 8 1-3/4-20 SPLIN 2 00753286 2 CROSS & BEARING KIT #8-CV 3 00759119 1 YOKE-COLLAR & SNAP RING 4 00752881 5 GREASE FITTING 5 00753070 1 OUTER TUBE W/YOKE SERIES 8 6 0075 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 35

    DRIVELINE ASSEMBLY - MAIN CV 1000 RPM SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 00760453 - DRIVELINE,1000 CV CAT5 1-3/8- 1 8478 1 YOKE 1-3/8 21-SP 2 8482 1 DOUBLE YOKE 3 8382 1 FITTING,GREASE M8 X 1 4 7432 1 YOKE-INBOARD 5 7433 2 CROSS & BEARING KIT 6 8384 2 SPRING PIN 10MM X 90MM 7 00760632 1 PROFILE-INNER SAGA 8 007 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 36

    DRIVELINE ASSEMBLY - MAIN CV 1000 RPM SN 11001 - 11270 APR 1990 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 00759242 - CV DRIVELINE,1000,1-3/8-21YOKE 1 00759232 1 SCQD YOKE 1000 RPM 2 00759233 1 BODY, ASY 3 00759234 2 KIT, CROSS & BEARING 4 00760453 1 DRIVELINE,1000 CV CAT5 1-3/8- 5 00759236 1 SHIELD, BELL 6 00759237 1 TUBE-SHIELD 7 1442 4 BEARI ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 37

    DRIVELINE ASSEMBLY - MAIN CV 540 RPM SN 10001 - 11000 APR 1988 - APR 1990 ITEM PART NO. QTY. DESCRIPTION 00754009 - CV DRIVELINE 540,1-3/8-6 YOKE 1 00753908 1 YOKE, SERIES 8 1-3/4-20 SPLIN 2 00753286 2 CROSS & BEARING KIT #8-CV 4 00752881 5 GREASE FITTING 5 00753070 1 OUTER TUBE W/YOKE SERIES 8 6 00753071 1 MOWER HALF ASMBLY (1-3/4-20) 8 007530 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 38

    DRIVELINE ASSEMBLY - MAIN CV 540 RPM SN 10001 - 11270 APR 1998 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 00760452 - DRIVELINE,540 CV CAT 5 1-3/8-6 1 7431 1 YOKE SLIDE COLLAR 2 8482 1 DOUBLE YOKE 3 8382 1 FITTING,GREASE M8 X 1 4 7432 1 YOKE-INBOARD 5 7433 2 CROSS & BEARING KIT 6 8384 2 SPRING PIN 10MM X 90MM 7 00760632 1 PROFILE-INNER SAGA 8 00 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 39

    DRIVELINE ASSEMBLY - MAIN CV 540 RPM SN 11001 - 11270 APR 1990 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 00759243 - CV DRIVELINE,540 1-3/8-6 YOKE 1 00759244 1 SC QD YOKE 540 RPM 2 00759233 1 BODY, ASY 3 00759234 2 KIT, CROSS & BEARING 4 00759234 1 KIT, CROSS & BEARING 5 00759236 1 SHIELD, BELL 6 00759237 1 TUBE-SHIELD 7 1442 4 BEARING, NYL ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 40

    GEARBOX ASSEMBLY - 1000 RPM SN 10001 - 11270 APR 1988 - SEPT 1990 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 38 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 41

    GEARBOX ASSEMBLY - 1000 RPM SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 00756741 - GEARBOX, 00756740 WITH LUBE 1 00755613 1 CASING 2 00756900 1 PINION 20 TEETH 1.2:1 3 00755615 2 BEARING 4 00753238 1 OIL SEAL 5 00755617 1 SHAFT 6 00755618 2 INTERNAL CIRCLIP 7 00755619 2 SHIM 8 00755620 1 EXTERNAL CIRCLIP 9 00756943 1 NUT M4 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 42

    GEARBOX ASSEMBLY - 540 RPM SN 10001 - 11270 APR 1988 - SEPT 1990 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 40 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 43

    GEARBOX ASSEMBLY - 540 RPM SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 00755598 - GRBX ASSY RH C/W-IN-C/CW OUT 1 00755613 1 CASING 2 00755614 1 GEAR, 24 TEETH 1:1.5 3 00755615 2 BEARING 4 00753238 1 OIL SEAL 5 00755617 1 SHAFT 6 00755618 2 INTERNAL CIRCLIP 7 00755619 2 SHIM 8 00755620 1 EXTERNAL CIRCLIP 9 00755621 1 NUT,SLO ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 44

    GEARBOX ASSEMBLY - 540 RPM SN 10001 - 11270 APR 1988 - SEPT 1990 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 42 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 45

    GEARBOX ASSEMBLY - 540 RPM SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 00755566 - GRBX ASSY C/W-IN-C/W OUT 1 00755613 1 CASING 2 00755614 1 GEAR, 24 TEETH 1:1.5 3 00755615 2 BEARING 4 00753238 1 OIL SEAL 5 00755617 1 SHAFT 6 00755618 2 INTERNAL CIRCLIP 7 00755619 2 SHIM 8 00755620 1 EXTERNAL CIRCLIP 9 00755621 1 NUT,SLOTTED ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 46

    GEARBOX ASSEMBLY - CENTER SECTION 1000 RPM SN 10001 - 11270 APR 1988 - SEPT 1990 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 44 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 47

    GEARBOX ASSEMBLY - CENTER SECTION 1000 RPM SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 00756622 - GEARBOX 1 00755613 1 CASING 2 00756900 1 PINION 20 TEETH 1.2:1 3 00755615 2 BEARING 4 00753238 1 OIL SEAL 5 00755617 1 SHAFT 6 00755618 2 INTERNAL CIRCLIP 7 00755619 2 SHIM 8 00755620 1 EXTERNAL CIRCLIP 9 00756943 1 NUT M40X1.5 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 48

    GEARBOX ASSEMBLY - DIVIDER 1000 RPM SN 10001 - 11100 APR 1988 - MAR 1990 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 46 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 49

    GEARBOX ASSEMBLY - DIVIDER 1000 RPM SN 10001 - 11100 APR 1988 - MAR 1990 ITEM PART NO. QTY. DESCRIPTION 00755698 - DIVIDER GEARBOX 1 00756643 2 SHAFT, 1-3/4-20 SPL WG OUTPUT 2 00756649 2 SNAP RING 40 UNI7436 .096 THK 3 00753223 2 BEARING 4 00753224 2 CIRCLIP, INTERNAL 5 00756644 2 SEAL,OIL 45X80X10 6 00753226 2 PLUG 7 00756645 2 SHIM, 69X79.9 8 007 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 50

    GEARBOX ASSEMBLY - DIVIDER 1000 RPM SN 11101 - 11270 MAR 1990 - OCT 1990 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 48 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 51

    GEARBOX ASSEMBLY - DIVIDER 1000 RPM SN 11101 - 11270 MAR 1990 - OCT 1990 ITEM PART NO. QTY. DESCRIPTION 00757826 - GEARBOX 540 DIVIDER 1:1.15 1 00758644 1 HOUSING,DIVIDER GEARBOX 2 00758669 2 GEAR,20 TOOTH 3 00758646 AR SHIM, ADJUSTMENT .004 OR .1M 4 00758647 AR SHIM, ADJUSTMENT .010 OR .25M 5 00758648 AR SHIM ,ADJUSTMENT O.5 6 00758649 2 CAP,HORIZ ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 52

    GEARBOX ASSEMBLY - DIVIDER 540 RPM SN 10001 - 11100 APR 1988 - MAR 1990 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 50 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 53

    GEARBOX ASSEMBLY - DIVIDER 540 RPM SN 10001 - 11100 APR 1988 - MAR 1990 ITEM PART NO. QTY. DESCRIPTION 00756604 - DIVIDER GEARBOX, COMER W/1-3/4 1 00756643 2 SHAFT, 1-3/4-20 SPL WG OUTPUT 2 00756649 2 SNAP RING 40 UNI7436 .096 THK 3 00753223 2 BEARING 4 00753224 2 CIRCLIP, INTERNAL 5 00756644 2 SEAL,OIL 45X80X10 6 00753226 2 PLUG 7 00753227 2 TAKE- ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 54

    GEARBOX ASSEMBLY - DIVIDER 540 RPM SN 11101 - 11270 MAR 1990 - OCT 1990 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 52 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 55

    GEARBOX ASSEMBLY - DIVIDER 540 RPM SN 11101 - 11270 MAR 1990 - OCT 1990 ITEM PART NO. QTY. DESCRIPTION 00757825 - GEARBOX 540 DIVIDER 1:1.15 1 00758644 1 HOUSING,DIVIDER GEARBOX 2 00758645 2 GEAR,20 TOOTH 3 00758646 AR SHIM, ADJUSTMENT .004 OR .1M 4 00758647 AR SHIM, ADJUSTMENT .010 OR .25M 5 00758648 AR SHIM ,ADJUSTMENT O.5 6 00758649 2 CAP,HORIZO ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 56

    GEARBOX ASSEMBLY - LEFT WING 1000 RPM SN 10001 - 11270 APR 1988 - SEPT 1990 SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 54 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 57

    GEARBOX ASSEMBLY - LEFT WING 1000 RPM SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 00756739 - GEARBOX 1 00755613 1 CASING 2 00756899 1 GEAR 24 TEETH 1.2:1 3 00755615 2 BEARING 4 00753238 1 OIL SEAL 5 00755617 1 SHAFT 6 00755618 2 INTERNAL CIRCLIP 7 00755619 2 SHIM 8 00755620 1 EXTERNAL CIRCLIP 9 00756943 1 NUT M40X1.5 10 007 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 58

    HOSE BRACKET ASSEMBLY SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 0651140100 1 WLDMT, HYD. HOSE BRKT 2 0651150100 1 HYD. HOSE BRKT. 3 7A101112 2 BLT 5/8 X 1-1/2 4 5B10110 2 NUT 5/8 HEX, ZP 5 131000 2 LOCK WASHER SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 56 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 59

    HYDRAULIC VALVE ASSEMBLY - CLOSED CENTER SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 15 6514042 1 PLUG, CLOSED CTR 38 6514041 1 SEAL 40 6514045 1 SEAL ORING 1X1-1/8X0.070 49 6514044 1 WASHER BACKUP 1-1/8X1X1/16TK Standard on Closed Valve SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section ? ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 60

    HYDRAULIC VALVE ASSEMBLY - CONVERSION PLUG SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 16 6514039 1 PLUG 37 6514041 1 SEAL Standard on Open Valve SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 58 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 61

    HYDRAULIC VALVE ASSEMBLY - DETENT W/SPRING ASSEMBLY SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 18 6514016 1 HOUSING DETENT 19 6514017 1 SLEEVE 20 6514018 1 WASHER 21 6514019 1 SPRING CENTERING (25#) 22 6514020 1 COLLAR STEP 23 6514021 1 WASHER 24 7E42012 1 C/S1/4 X 1 1/2 SK HD 25 6514022 1 CAP,END 26 7D42014 4 BOLT 27 6514 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 62

    HYDRAULIC VALVE ASSEMBLY - NON-ADJUSTABLE RELIEF SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 14 65140A50 1 RELEIF VALVE 31 6514034 1 O-RING 32 6514035 1 WASHER 33 6514036 1 SEAL Standard on Open Center Valve SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 60 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 63

    HYDRAULIC VALVE ASSEMBLY - NON-ADJUSTABLE RELIEF SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 17 6514037 1 PLUG, NO-RELIEF ASSY CROSS 34 6514034 1 O-RING 35 3514035 1 N/A 36 6514036 1 SEAL Standard on Closed Center Valve SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 61 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 64

    HYDRAULIC VALVE ASSEMBLY - OPEN/CLOSED CENTER VALVE SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 19E13/41/2 2 PIPE BUSHING 2 65140A47 3 HANDLE 3 65140A48 3 KIT-PIN 4 7E4204 6 SHCS 1/4 NC 1/2 5 65140A46 3 BRKT 6 6514012 6 PLATE RETAINER 7 6514013 6 SEAL, O-RING 8 6514026 3 POPPET 9 6514027 3 SPRING,LIFT CHECK 10 6514028 3 S ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 65

    JACK ASSEMBLY - TOP WIND SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 00756655 1 PARKING JACK 5000# CAPACITY 2 00749892 1 PIN-JACK RETAINING 3 00751685 1 PIN-CLIP HAIR SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 63 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 66

    LEVEL ROD ASSEMBLY SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 584042 2 WLDMT-ROD CONTROL 2 00756926 2 WLDMT,CTR SEC CONTROL ROD 3 00770485A 2 NUT,EXTENDED ADJUSTMENT 4 651102 4 PIN-DRILLED 5 5C1490 2 HEXNUT 7/8 JAM ZP 6 163012 8 PINS-CTR 3/16 X 1 1/2 7 15B1200 8 WASHER 3/4 P SAE 2 Assy Per Unit Reg. SR15/SR10 Master Part ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 67

    LIFT SCREW SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 0656510000 1 MANUAL-LIFT SCREW 2 651062F 2 FITTING,GREASE (DRIVE TYPE) 3 00609200 2 HEXB 1 NC 4 GR5 4 02030300 2 NUT TOPLOCK 1 NC PLB 5 00756579 1 TOP LINK THREAD LOCK Outboard Axle - 2 Req’d SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Par ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 68

    MAINFRAME COMPONENTS S/N 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 00756720 1 WLDMT, CENTER SECTION 2 00756719 1 WLDMT, LEFT WING 3 00756718 1 WLDMT, RIGHT WING 4 65109 1 PIN HINGE 5 7A51812 2 HHCS 5/16X1-1/2 ZP 5JRC5180 2 NUT TOPLOCK 5/16 6 5710121 3 COVER PLATE 7 5F5180 6 NUT 5/16 NC WING 8 0656270000 2 T,SPACER,LONG 9 0 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 69

    SAFETY SHIELD ASSEMBLY SN 10001 - 11100 APR 1988 - MAR 1990 ITEM PART NO. QTY. DESCRIPTION 1 0656130100 1 SHIELD, PRIMARY GEARBOX ** 2 00757573 1 SHIELD - GBX 3 00757742 1 WLDMT, BRKT-GB SHIELD 4 00004000 1 NUT, 1/4-20NC PL WINGNUT 5 00751693 4 HEXB METRIC 8-P1.25- 16MM PL5 6 10182000 2 HHCS 3/8-16 7 00011700 4 LOCKWASHER 5/16 PL STD 8 00011100 4 F ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 70

    SAFETY SHIELD ASSEMBLY SN 11101 - 11270 MAR 1990 - OCT 1990 ITEM PART NO. QTY. DESCRIPTION 1 00759781 1 SHIELD, PRIMARY GB 2 00757573 SHIELD - GBX + 3 00757742 WLDMT, BRKT-GB SHIELD + 4 00004000 NUT, 1/4-20NC PL WINGNUT + 5 00751693 HEXB METRIC 8-P1.25- 16MM PL5 + 6 10182000 HHCS 3/8-16 + 7 00011700 LOCKWASHER 5/16 PL STD + 8 00011100 FLATWASHER 3/ ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 71

    SKID SHOE & SIDE SKIRT - OFFSET MODELS SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 00757071 - SKIRT LH CTR SC FOR 10 FT. 1 00757066 1 L/H CENTER SECTION SKIRT 2 00757069 1 SLIDE SHOE BAR 3 2A381312 3 BOLT,PLOW 1/2 NC X 1-1/2 GR.5 4 00001200 7 NUT,HEX 1/2 NC PL 5 00001300 7 LOCKWASHER 1/2 PL STD 6 63066100 4 HHCS 3/8NCX1 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 72

    SKID SHOE - CENTER SECTION SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 00751305 2 WLDMT,SKID SHOE CS 15 2 00749171 4 HHCS 1/2-20UNF 1-1/4 PL5 3 02716500 4 NUT TOPLOCK 1/2 NF PLB SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 70 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 73

    SKID SHOE & SIDE SKIRT ASSEMBLY SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 00756881 1 RIGHT WING SIDE SKIRT WLDMT 00756879 1 LEFT WING SIDE SKIRT WLDMT 2 65203R 1 SHOES SLIDE 65203L 1 SHOES SLIDE 3 00002700 14 FLATWASHER 1/2 PL STD 4 00001200 20 NUT,HEX 1/2 NC PL 5 00748823 10 HHCS 1/2-13UNC 1-1/2 PL5 6 00001300 20 L ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 74

    SLIP CLUTCH ASSEMBLY - SERIES 6 SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 00756075 - CLUTCH & YOKE SERIES 6 1 00754199 8 BOLT & NUT M10X95 SELF LK NUT 2 00754203 1 PRESSURE PLATE 3 00754201 1 INNER PLATE 4 00754202 4 RING,CLUTCH LINING 5 00755599 1 BODY-FRICTION CLUTCH 6 00755600 2 NUT & BOLT 14X70MM 7 0075431 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 75

    SLIP CLUTCH ASSEMBLY - SERIES 8 SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 00756173 - CLUTCH & YOKE SERIES 8 1 00754199 8 BOLT & NUT M10X95 SELF LK NUT 2 00754203 1 PRESSURE PLATE 3 00754201 1 INNER PLATE 4 00754202 4 RING,CLUTCH LINING 5 00755599 1 BODY-FRICTION CLUTCH 6 00755600 2 NUT & BOLT 14X70MM 7 0075431 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 76

    SPRING POD ASSEMBLY - CENTER AXLE SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 0656460100 - CENTER SPRING ASSY 1 0656460110 1 UPPER SPRING WLD 2 0656460120 1 LOWER SPRING WLD 3 5JRC12100 4 NUT TOPLOCK 3/4 4 371063A 4 SPRING 5 65107A4 4 GUIDE SPRING 6 00002701 4 FLATWASHER,3/4,TYPE AW,ZP 7 02023800 4 HEXB 3/4 NC 6-1/2PL 8 371 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 77

    SPRING POD ASSEMBLY - OUTBOARD AXLE SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 00756999 - SPRING ASSY OUTBOARD AXLE 1 00756907 1 WLDMT, ROCKER ARM 2 163016 2 PIN, COTTER 3/16 X 2 3 00756998 1 PIN-ROCKER ARM 4 371063A 1 SPRING SR15/SR10 Master Parts Book (Jun-05) Rev 04-06 ©2006 Alamo Group Inc. Parts Section – 75 ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 78

    TIRE SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 00008700 1 WHEEL, RIM ONLY 2 00025200 1 NOTAT TIRE & WHEEL NOTE: 4 or 6 assemblies are needed, depending upon Axle requirement. ALSO AVAILABLE Recapped Airplane Tire on 5x12 rim - PN 00750016 (Not Shown) Used 14" Airplane Tire and Wheel - PN 00749700 (Not Shown) SR ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 79

    TONGUE ASSEMBLY USED ON 44R DRIVELINE SN 10527 - 11270 MAR 1989 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 651051 1 WLDMT, TONGUE 2 0811050020 1 WLDMT-TONGUE HITCH 3 651053 1 ROD HITCH CONTROL 4 651054 2 PIN-TONGUE PIVOT 6 7AH5121620 2 C/S 3/4 X 2 1/2 NF 5 7 7AH5121636 1 C/S 3/4 X 4 1/2 NF 5 8 5JRC12160 3 NUT TOPLOCK 3/4 NF PLC 9 163016 2 PIN, CO ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 80

    TONGUE ASSEMBLY USED ON C.V. DRIVELINE SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 00756667 1 WLDMT, TONGUE 2 0811050020 1 WLDMT-TONGUE HITCH 3 00755841 1 TONGUE HITCH CONTROL ROD ASSY 4 651054 2 PIN-TONGUE PIVOT 6 7AH5121620 1 C/S 3/4 X 2 1/2 NF 5 * 7 7AH5121636 3 C/S 3/4 X 4 1/2 NF 5 8 5JRC12160 2 NUT TOPLOCK 3/4 NF PLC ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 81

    WEIGHT BOX SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 0656390100 1 WEIGHT BOX WELD 2 0656390300 1 COVER 3 12BF6168 6 SCREW 3/8 X 1 NC 4 00012101 6 LOCKWASHER 3/8 PL HVY 5 00757359 1 BRACE STRAP 6 7A121016 1 C/S 3/4 X 2 NC ZP 7 00003901 1 LOCKWASHER 3/4 PL HEAVY 8 00000200 1 NUT 3/4 NC HEX PL 9 15B1200 1 WASHER 3/4 P SAE ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 82

    WHEEL HUB ASSEMBLY SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 00757241 - WHEEL HUB 3 00756576 1 BEARING CUP OUTSIDE 4 00750434 1 BEARING CONE INSIDE 5 00756577 1 BEARING CUP INSIDE 6 00752177 5 BOLT, STUD 1/2-20 NF X 1-7/8 7 00750614 5 NUT 1/2-20NF 90DEG.CONE LUG PL 8 00756490 1 NUT SLOTTED THIN 1 NF PLC 9 02957044 1 OIL S ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 83

    WINCH & HOLD DOWN STRAP SN 10001 - 11270 APR 1988 - SEPT 1990 ITEM PART NO. QTY. DESCRIPTION 1 0656200100 1 STAND WINCH FS15 2 7A6168 3 C/S3/8 X 1 NC 3 7A81312 2 C/S1/2 X 1 1/2 NC 4 15B600 1 WASHER 3/8 SAE P 5 00012101 3 LOCKWASHER 3/8 PL HVY 6 13800 2 LOCK WASHER 7 00013901 3 NUT HEX 3/8 NC PL 8 00001200 2 NUT,HEX 1/2 NC PL 9 B651202 1 WINCH & ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 84

    ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 85

    LIMITED WARRANTY 1. LIMITED WARRANTIES 1.01. Servis-Rhino warrants for one year from the purchase date to the original non-commercial, governmental, or municipal purchaser (“Purchaser”) and warrants for six months to the original commercial or industrial purchaser (“Purchaser”) that the goods purchased are free from defects in material or w ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 86

    T O THE OWNER/OPERA T OR/DEALER To keep your implement running efficiently and safely, read your manual thoroughly and follow these directions and the Safety Messages in this Manual. The Table of Contents clearly identifies each section where you can easily find the information you need. The OCCUPATIONAL SAFETY AND HEALTH ACT (1928.51 Subpart C) ma ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 87

    ...

  • Servis-Rhino Flex-Wing Rotary Cutter/Shredder - page 88

    Printed U.S.A. SR15/SR10 PL 06-05 P/N 00764578MB ...

Produzent Servis-Rhino Kategorie Lawn Mower Accessory

Dokumente, die wir vom Produzenten des Geräts Servis-Rhino Flex-Wing Rotary Cutter/Shredder erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Servis-Rhino
- Bedienungsanleitungen Flex-Wing Rotary Cutter/Shredder
- Produktkarten Servis-Rhino
- Informationsbroschüren
- oder Energieetiketten Servis-Rhino Flex-Wing Rotary Cutter/Shredder
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Servis-Rhino Flex-Wing Rotary Cutter/Shredder.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Servis-Rhino Flex-Wing Rotary Cutter/Shredder, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Servis-Rhino Flex-Wing Rotary Cutter/Shredder. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Servis-Rhino Flex-Wing Rotary Cutter/Shredder ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Servis-Rhino Flex-Wing Rotary Cutter/Shredder, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Servis-Rhino Flex-Wing Rotary Cutter/Shredder hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Servis-Rhino Flex-Wing Rotary Cutter/Shredder verständlich ist.

Eine gänzliche Bedienungsanleitung von Servis-Rhino sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Servis-Rhino Flex-Wing Rotary Cutter/Shredder bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Servis-Rhino Flex-Wing Rotary Cutter/Shredder befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Servis-Rhino Flex-Wing Rotary Cutter/Shredder, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Servis-Rhino Flex-Wing Rotary Cutter/Shredder - die uns die ersten Schritte während der Nutzung von Servis-Rhino Flex-Wing Rotary Cutter/Shredder erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Servis-Rhino Flex-Wing Rotary Cutter/Shredder hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Servis-Rhino Flex-Wing Rotary Cutter/Shredder im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Servis-Rhino Flex-Wing Rotary Cutter/Shredder?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Servis-Rhino Flex-Wing Rotary Cutter/Shredder nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Servis-Rhino Flex-Wing Rotary Cutter/Shredder hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)