Bedienungsanleitung Perle Systems C-110-XXXXX

20 Seiten 0.14 mb
Download

Zur Seite of 20

Summary
  • Perle Systems C-110-XXXXX - page 1

    P/N 5500307-15 Perle 10/100 Ethernet Media Convert er Module Installation Guide C-110-XX XXX Unm anaged Module CM-110-XX XXX Managed Modu le ...

  • Perle Systems C-110-XXXXX - page 2

    Perle 10/100 Media Converter M odule – Installation Guide 2 Over vie w This docum ent contains instructions n ecessar y for the instal lation and operation of the Perle 10/1 00 Ethernet M edia Con verter Modul e(s) (C- 110 and CM-11 0) that are us ed in conjunc tion with a P erle MCR Ch assis. The C- 110 are unm anaged m edia converter m odules, ...

  • Perle Systems C-110-XXXXX - page 3

    Perle 10/100 Media Converter M odule – Installation Guide 3 Installatio n The m odule comes equi pped with a ba nk of DIP switches an d jum pers for setting conf iguration. The default d ip switch set tings (all s witches in the UP position) and default jum per settings will work for mos t installations. The f ollowing steps are used to co nfigur ...

  • Perle Systems C-110-XXXXX - page 4

    Perle 10/100 Media Converter M odule – Installation Guide 4 Auto-Config Jumper (CM-110 only ) The Auto-Co nfig jum per (J6) is located jus t belo w the Auto-MDIX jumper ( see above). Ref er to the diagram below f or labelling. T his jumper onl y applies to CM- 110 m odules. Strapping p ins 1 and 2 of the jum per will set the m odule in SW m ode a ...

  • Perle Systems C-110-XXXXX - page 5

    Perle 10/100 Media Converter M odule – Installation Guide 5 DIP Switches DIP Switch Settings Auto Negoti ation (Sw itch 1) Switch Posit ion Mode Up (defau lt) Auto Down Off Note: Auto ne gotiation s hould onl y be turned of f, if the copper link partner does n ot support Auto Negot iation or fix ed settings ar e required b y the copper link partn ...

  • Perle Systems C-110-XXXXX - page 6

    Perle 10/100 Media Converter M odule – Installation Guide 6 Converter M odule will be determ ined by the Du plex (switch 4) and Speed (s witch 5) dip s witch settings . Link M ode (Switch 2) Switch Posit ion Mode Up (defau lt) Link Pass- Through Mode Down Standard Mo de Link Pass-T hrough: In this mode, the l ink state on one connec tion is direc ...

  • Perle Systems C-110-XXXXX - page 7

    Perle 10/100 Media Converter M odule – Installation Guide 7 fiber link on either the tra nsm it or receive line will b e passed throu gh to the local co pper connec tion thus notifying the c onnected de vice. If the Media C onverter has been set to Link Pass -Through m ode, the effec t will be the sam e as FEF, since the link loss on the fiber re ...

  • Perle Systems C-110-XXXXX - page 8

    Perle 10/100 Media Converter M odule – Installation Guide 8 Duplex (copp er) (Sw itch 4) Switch Posit ion Mode Up (defau lt) Full Down Half Note: W hen Auto Negoti ation (SW 1) is set to Of f, the Media Converter will use this D uplex settin g for its copp er connectio n. Up: T he Media Converter Module wi ll be set to Fu ll Duplex m ode. Dow n: ...

  • Perle Systems C-110-XXXXX - page 9

    Perle 10/100 Media Converter M odule – Installation Guide 9 Duplex (fiber) ( Swit ch 6) Switch Posit ion Mode Up (defau lt) Full Down Half Up: T he Media Converter Module’s f iber link wil l be set to F ull Duplex Mode. Dow n: The Media Conv erter Module’s f iber will be s et to Half D uplex Mode. Loopback (Sw itch 7 Switch Pos ition Mode Up ...

  • Perle Systems C-110-XXXXX - page 10

    Perle 10/100 Media Converter M odule – Installation Guide 10 Installing or Replacing Media Converter Modules Caution: O bserve electro static dis charge precau tions wh en installing the Media Con verter Module(s) into th e Chassis. Failure to obs erve this caution co uld result in d amage to t he Media Convert er M odul e(s) and /o r chassis. Th ...

  • Perle Systems C-110-XXXXX - page 11

    Perle 10/100 Media Converter M odule – Installation Guide 11 6. Tighten the ca ptive retai ner scr ew to ensure the Me dia Converter M odule is loc ked in place . 7. Rem ove the dust cap f rom the fiber c onnector and connect th e fiber and copp er cables . Removing Media Convert Modules 1. Loosen the c aptive retain er screw on th e front of the ...

  • Perle Systems C-110-XXXXX - page 12

    Perle 10/100 Media Converter M odule – Installation Guide 12 • Connect the fiber cable f rom one Medi a Converter M odule to the other Media C onverter/s witch/f iber device. Installing the Copper Cable • Locate 10/100 Base-T compliant copper c ables with male, RJ- 45 connectors installed at both ends . • Connect the RJ-45 cable between th ...

  • Perle Systems C-110-XXXXX - page 13

    Perle 10/100 Media Converter M odule – Installation Guide 13 Operation Status LED The Perle 10/ 100 Etherne t Media C onverter Mod ules have six s ingle color status LEDs located on t he face plate of the m odule. PWR On – Power is on; mod ule is operating normal ly Blinking (slow ) – The module is in Loopback mode . Blinking (fast) – The m ...

  • Perle Systems C-110-XXXXX - page 14

    Perle 10/100 Media Converter M odule – Installation Guide 14 Other Features Auto-M DIX: Auto-MDIX ( autom atic medium- dependant interf ace crossover) detects the s ignalling on the 10/100 BASE-T interface to det erm ine the type of c able connec ted (straight-thr ough or cros sover) and automatical ly configures t he conn ection. Error Recov ery ...

  • Perle Systems C-110-XXXXX - page 15

    Perle 10/100 Media Converter M odule – Installation Guide 15 Troubleshooting General • Ensure that the Me dia Converter Module is s ecurely s eated in the chassis. T he PWR LED s hould be on. • Ensure both devices on either end of the fib er are com patible. If using a sim plex fiber con nection, ens ure that you have both an Upstream (U) and ...

  • Perle Systems C-110-XXXXX - page 16

    Perle 10/100 Media Converter M odule – Installation Guide 16 Method 2: The f iber connection ca n also be verified b y configuring the r emote Media Con verter for loop back m ode. The LKF L EDs on both Media Con verters should be lit. Data s hould pas s through t he local converter, o ver the fiber co nnection to th e rem ote Media Converter. At ...

  • Perle Systems C-110-XXXXX - page 17

    Perle 10/100 Media Converter M odule – Installation Guide 17 Technical Specifications Power Inpu t/Consumpt ion 12V DC / 2.1 W Operating T emperatur e: 0 °C to 50 °C (32 °F to 122 ° F) Storage Tem perature: - 25 °C to 70 °C (-13 °F to 15 8 °F) Operating Hu midity: 5% to 90% non-condensing Storage Hum idity: 5% to 95% non-condensing Operat ...

  • Perle Systems C-110-XXXXX - page 18

    Perle 10/100 Media Converter M odule – Installation Guide 18 C-110-S2ST120 CM-110-S2ST120 S M TX: 1550 RX: 1550 M in: 0 Max: 5 Min: -35 Max: 0 35 C-110-S2LC120 CM-110-S2LC120 SM TX: 15 50 RX: 1550 M in: 0 Max: 5 Min: -35 Max: -3 35 C-110-S1SC20U CM-110-S1SC20U SM TX: 1310 RX: 1550 M in: -14 Max: -8 Min: -32 Max: -3 18 C-110-S1SC20D CM-110-S1SC20D ...

  • Perle Systems C-110-XXXXX - page 19

    Perle 10/100 Media Converter M odule – Installation Guide 19 Compliance Information FCC This product has been found to comply with the li mits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against har mful interference when the equip ment is operated in a commercial ...

  • Perle Systems C-110-XXXXX - page 20

    Perle 10/100 Media Converter M odule – Installation Guide 20 Warranty / Reg istration Perle’s stan dard Lifetim e Warrant y provides cus tomers with r eturn to factor y repa irs for Perle products that fail under the condit ions of the warrant y coverage. Detai ls can be fou nd at: http://www.pe rle.com/support_services/warrant y .shtml Contact ...

Produzent Perle Systems Kategorie Network Card

Dokumente, die wir vom Produzenten des Geräts Perle Systems C-110-XXXXX erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Perle Systems
- Bedienungsanleitungen C-110-XXXXX
- Produktkarten Perle Systems
- Informationsbroschüren
- oder Energieetiketten Perle Systems C-110-XXXXX
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Perle Systems C-110-XXXXX.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Perle Systems C-110-XXXXX, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Perle Systems C-110-XXXXX. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Perle Systems C-110-XXXXX ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Perle Systems C-110-XXXXX, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Perle Systems C-110-XXXXX hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Perle Systems C-110-XXXXX verständlich ist.

Eine gänzliche Bedienungsanleitung von Perle Systems sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Perle Systems C-110-XXXXX bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Perle Systems C-110-XXXXX befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Perle Systems C-110-XXXXX, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Perle Systems C-110-XXXXX - die uns die ersten Schritte während der Nutzung von Perle Systems C-110-XXXXX erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Perle Systems C-110-XXXXX hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Perle Systems C-110-XXXXX im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Perle Systems C-110-XXXXX?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Perle Systems C-110-XXXXX nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Perle Systems C-110-XXXXX hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)